| /* SPDX-License-Identifier: GPL-2.0-or-later */ |
| /* |
| * drivers/net/bond/bond_options.h - bonding options |
| * Copyright (c) 2013 Nikolay Aleksandrov <nikolay@redhat.com> |
| */ |
| |
| #ifndef _NET_BOND_OPTIONS_H |
| #define _NET_BOND_OPTIONS_H |
| |
| #include <linux/bits.h> |
| #include <linux/limits.h> |
| #include <linux/types.h> |
| #include <linux/string.h> |
| |
| struct netlink_ext_ack; |
| struct nlattr; |
| |
| #define BOND_OPT_MAX_NAMELEN 32 |
| #define BOND_OPT_VALID(opt) ((opt) < BOND_OPT_LAST) |
| #define BOND_MODE_ALL_EX(x) (~(x)) |
| |
| /* Option flags: |
| * BOND_OPTFLAG_NOSLAVES - check if the bond device is empty before setting |
| * BOND_OPTFLAG_IFDOWN - check if the bond device is down before setting |
| * BOND_OPTFLAG_RAWVAL - the option parses the value itself |
| */ |
| enum { |
| BOND_OPTFLAG_NOSLAVES = BIT(0), |
| BOND_OPTFLAG_IFDOWN = BIT(1), |
| BOND_OPTFLAG_RAWVAL = BIT(2) |
| }; |
| |
| /* Value type flags: |
| * BOND_VALFLAG_DEFAULT - mark the value as default |
| * BOND_VALFLAG_(MIN|MAX) - mark the value as min/max |
| */ |
| enum { |
| BOND_VALFLAG_DEFAULT = BIT(0), |
| BOND_VALFLAG_MIN = BIT(1), |
| BOND_VALFLAG_MAX = BIT(2) |
| }; |
| |
| /* Option IDs, their bit positions correspond to their IDs */ |
| enum { |
| BOND_OPT_MODE, |
| BOND_OPT_PACKETS_PER_SLAVE, |
| BOND_OPT_XMIT_HASH, |
| BOND_OPT_ARP_VALIDATE, |
| BOND_OPT_ARP_ALL_TARGETS, |
| BOND_OPT_FAIL_OVER_MAC, |
| BOND_OPT_ARP_INTERVAL, |
| BOND_OPT_ARP_TARGETS, |
| BOND_OPT_DOWNDELAY, |
| BOND_OPT_UPDELAY, |
| BOND_OPT_LACP_RATE, |
| BOND_OPT_MINLINKS, |
| BOND_OPT_AD_SELECT, |
| BOND_OPT_NUM_PEER_NOTIF, |
| BOND_OPT_MIIMON, |
| BOND_OPT_PRIMARY, |
| BOND_OPT_PRIMARY_RESELECT, |
| BOND_OPT_USE_CARRIER, |
| BOND_OPT_ACTIVE_SLAVE, |
| BOND_OPT_QUEUE_ID, |
| BOND_OPT_ALL_SLAVES_ACTIVE, |
| BOND_OPT_RESEND_IGMP, |
| BOND_OPT_LP_INTERVAL, |
| BOND_OPT_SLAVES, |
| BOND_OPT_TLB_DYNAMIC_LB, |
| BOND_OPT_AD_ACTOR_SYS_PRIO, |
| BOND_OPT_AD_ACTOR_SYSTEM, |
| BOND_OPT_AD_USER_PORT_KEY, |
| BOND_OPT_NUM_PEER_NOTIF_ALIAS, |
| BOND_OPT_PEER_NOTIF_DELAY, |
| BOND_OPT_LACP_ACTIVE, |
| BOND_OPT_MISSED_MAX, |
| BOND_OPT_NS_TARGETS, |
| BOND_OPT_PRIO, |
| BOND_OPT_COUPLED_CONTROL, |
| BOND_OPT_LAST |
| }; |
| |
| /* This structure is used for storing option values and for passing option |
| * values when changing an option. The logic when used as an arg is as follows: |
| * - if value != ULLONG_MAX -> parse value |
| * - if string != NULL -> parse string |
| * - if the opt is RAW data and length less than maxlen, |
| * copy the data to extra storage |
| */ |
| |
| #define BOND_OPT_EXTRA_MAXLEN 16 |
| struct bond_opt_value { |
| char *string; |
| u64 value; |
| u32 flags; |
| union { |
| char extra[BOND_OPT_EXTRA_MAXLEN]; |
| struct net_device *slave_dev; |
| }; |
| }; |
| |
| struct bonding; |
| |
| struct bond_option { |
| int id; |
| const char *name; |
| const char *desc; |
| u32 flags; |
| |
| /* unsuppmodes is used to denote modes in which the option isn't |
| * supported. |
| */ |
| unsigned long unsuppmodes; |
| /* supported values which this option can have, can be a subset of |
| * BOND_OPTVAL_RANGE's value range |
| */ |
| const struct bond_opt_value *values; |
| |
| int (*set)(struct bonding *bond, const struct bond_opt_value *val); |
| }; |
| |
| int __bond_opt_set(struct bonding *bond, unsigned int option, |
| struct bond_opt_value *val, |
| struct nlattr *bad_attr, struct netlink_ext_ack *extack); |
| int __bond_opt_set_notify(struct bonding *bond, unsigned int option, |
| struct bond_opt_value *val); |
| int bond_opt_tryset_rtnl(struct bonding *bond, unsigned int option, char *buf); |
| |
| const struct bond_opt_value *bond_opt_parse(const struct bond_option *opt, |
| struct bond_opt_value *val); |
| const struct bond_option *bond_opt_get(unsigned int option); |
| const struct bond_option *bond_opt_get_by_name(const char *name); |
| const struct bond_opt_value *bond_opt_get_val(unsigned int option, u64 val); |
| |
| /* This helper is used to initialize a bond_opt_value structure for parameter |
| * passing. There should be either a valid string or value, but not both. |
| * When value is ULLONG_MAX then string will be used. |
| */ |
| static inline void __bond_opt_init(struct bond_opt_value *optval, |
| char *string, u64 value, |
| void *extra, size_t extra_len) |
| { |
| memset(optval, 0, sizeof(*optval)); |
| optval->value = ULLONG_MAX; |
| if (value != ULLONG_MAX) |
| optval->value = value; |
| else if (string) |
| optval->string = string; |
| |
| if (extra && extra_len <= BOND_OPT_EXTRA_MAXLEN) |
| memcpy(optval->extra, extra, extra_len); |
| } |
| #define bond_opt_initval(optval, value) __bond_opt_init(optval, NULL, value, NULL, 0) |
| #define bond_opt_initstr(optval, str) __bond_opt_init(optval, str, ULLONG_MAX, NULL, 0) |
| #define bond_opt_initextra(optval, extra, extra_len) \ |
| __bond_opt_init(optval, NULL, ULLONG_MAX, extra, extra_len) |
| #define bond_opt_slave_initval(optval, slave_dev, value) \ |
| __bond_opt_init(optval, NULL, value, slave_dev, sizeof(struct net_device *)) |
| |
| void bond_option_arp_ip_targets_clear(struct bonding *bond); |
| #if IS_ENABLED(CONFIG_IPV6) |
| void bond_option_ns_ip6_targets_clear(struct bonding *bond); |
| #endif |
| void bond_slave_ns_maddrs_add(struct bonding *bond, struct slave *slave); |
| void bond_slave_ns_maddrs_del(struct bonding *bond, struct slave *slave); |
| |
| #endif /* _NET_BOND_OPTIONS_H */ |