| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Off-channel operation helpers |
| * |
| * Copyright 2003, Jouni Malinen <jkmaline@cc.hut.fi> |
| * Copyright 2004, Instant802 Networks, Inc. |
| * Copyright 2005, Devicescape Software, Inc. |
| * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz> |
| * Copyright 2007, Michael Wu <flamingice@sourmilk.net> |
| * Copyright 2009 Johannes Berg <johannes@sipsolutions.net> |
| * Copyright (C) 2019, 2022-2024 Intel Corporation |
| */ |
| #include <linux/export.h> |
| #include <net/mac80211.h> |
| #include "ieee80211_i.h" |
| #include "driver-ops.h" |
| |
| /* |
| * Tell our hardware to disable PS. |
| * Optionally inform AP that we will go to sleep so that it will buffer |
| * the frames while we are doing off-channel work. This is optional |
| * because we *may* be doing work on-operating channel, and want our |
| * hardware unconditionally awake, but still let the AP send us normal frames. |
| */ |
| static void ieee80211_offchannel_ps_enable(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; |
| bool offchannel_ps_enabled = false; |
| |
| /* FIXME: what to do when local->pspolling is true? */ |
| |
| del_timer_sync(&local->dynamic_ps_timer); |
| del_timer_sync(&ifmgd->bcn_mon_timer); |
| del_timer_sync(&ifmgd->conn_mon_timer); |
| |
| wiphy_work_cancel(local->hw.wiphy, &local->dynamic_ps_enable_work); |
| |
| if (local->hw.conf.flags & IEEE80211_CONF_PS) { |
| offchannel_ps_enabled = true; |
| local->hw.conf.flags &= ~IEEE80211_CONF_PS; |
| ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); |
| } |
| |
| if (!offchannel_ps_enabled || |
| !ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK)) |
| /* |
| * If power save was enabled, no need to send a nullfunc |
| * frame because AP knows that we are sleeping. But if the |
| * hardware is creating the nullfunc frame for power save |
| * status (ie. IEEE80211_HW_PS_NULLFUNC_STACK is not |
| * enabled) and power save was enabled, the firmware just |
| * sent a null frame with power save disabled. So we need |
| * to send a new nullfunc frame to inform the AP that we |
| * are again sleeping. |
| */ |
| ieee80211_send_nullfunc(local, sdata, true); |
| } |
| |
| /* inform AP that we are awake again */ |
| static void ieee80211_offchannel_ps_disable(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_local *local = sdata->local; |
| |
| if (!local->ps_sdata) |
| ieee80211_send_nullfunc(local, sdata, false); |
| else if (local->hw.conf.dynamic_ps_timeout > 0) { |
| /* |
| * the dynamic_ps_timer had been running before leaving the |
| * operating channel, restart the timer now and send a nullfunc |
| * frame to inform the AP that we are awake so that AP sends |
| * the buffered packets (if any). |
| */ |
| ieee80211_send_nullfunc(local, sdata, false); |
| mod_timer(&local->dynamic_ps_timer, jiffies + |
| msecs_to_jiffies(local->hw.conf.dynamic_ps_timeout)); |
| } |
| |
| ieee80211_sta_reset_beacon_monitor(sdata); |
| ieee80211_sta_reset_conn_monitor(sdata); |
| } |
| |
| void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local) |
| { |
| struct ieee80211_sub_if_data *sdata; |
| |
| lockdep_assert_wiphy(local->hw.wiphy); |
| |
| if (WARN_ON(!local->emulate_chanctx)) |
| return; |
| |
| /* |
| * notify the AP about us leaving the channel and stop all |
| * STA interfaces. |
| */ |
| |
| /* |
| * Stop queues and transmit all frames queued by the driver |
| * before sending nullfunc to enable powersave at the AP. |
| */ |
| ieee80211_stop_queues_by_reason(&local->hw, IEEE80211_MAX_QUEUE_MAP, |
| IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL, |
| false); |
| ieee80211_flush_queues(local, NULL, false); |
| |
| list_for_each_entry(sdata, &local->interfaces, list) { |
| if (!ieee80211_sdata_running(sdata)) |
| continue; |
| |
| if (sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE || |
| sdata->vif.type == NL80211_IFTYPE_NAN) |
| continue; |
| |
| if (sdata->vif.type != NL80211_IFTYPE_MONITOR) |
| set_bit(SDATA_STATE_OFFCHANNEL, &sdata->state); |
| |
| /* Check to see if we should disable beaconing. */ |
| if (sdata->vif.bss_conf.enable_beacon) { |
| set_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, |
| &sdata->state); |
| sdata->vif.bss_conf.enable_beacon = false; |
| ieee80211_link_info_change_notify( |
| sdata, &sdata->deflink, |
| BSS_CHANGED_BEACON_ENABLED); |
| } |
| |
| if (sdata->vif.type == NL80211_IFTYPE_STATION && |
| sdata->u.mgd.associated) |
| ieee80211_offchannel_ps_enable(sdata); |
| } |
| } |
| |
| void ieee80211_offchannel_return(struct ieee80211_local *local) |
| { |
| struct ieee80211_sub_if_data *sdata; |
| |
| lockdep_assert_wiphy(local->hw.wiphy); |
| |
| if (WARN_ON(!local->emulate_chanctx)) |
| return; |
| |
| list_for_each_entry(sdata, &local->interfaces, list) { |
| if (sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE) |
| continue; |
| |
| if (sdata->vif.type != NL80211_IFTYPE_MONITOR) |
| clear_bit(SDATA_STATE_OFFCHANNEL, &sdata->state); |
| |
| if (!ieee80211_sdata_running(sdata)) |
| continue; |
| |
| /* Tell AP we're back */ |
| if (sdata->vif.type == NL80211_IFTYPE_STATION && |
| sdata->u.mgd.associated) |
| ieee80211_offchannel_ps_disable(sdata); |
| |
| if (test_and_clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, |
| &sdata->state)) { |
| sdata->vif.bss_conf.enable_beacon = true; |
| ieee80211_link_info_change_notify( |
| sdata, &sdata->deflink, |
| BSS_CHANGED_BEACON_ENABLED); |
| } |
| } |
| |
| ieee80211_wake_queues_by_reason(&local->hw, IEEE80211_MAX_QUEUE_MAP, |
| IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL, |
| false); |
| } |
| |
| static void ieee80211_roc_notify_destroy(struct ieee80211_roc_work *roc) |
| { |
| /* was never transmitted */ |
| if (roc->frame) { |
| cfg80211_mgmt_tx_status(&roc->sdata->wdev, roc->mgmt_tx_cookie, |
| roc->frame->data, roc->frame->len, |
| false, GFP_KERNEL); |
| ieee80211_free_txskb(&roc->sdata->local->hw, roc->frame); |
| } |
| |
| if (!roc->mgmt_tx_cookie) |
| cfg80211_remain_on_channel_expired(&roc->sdata->wdev, |
| roc->cookie, roc->chan, |
| GFP_KERNEL); |
| else |
| cfg80211_tx_mgmt_expired(&roc->sdata->wdev, |
| roc->mgmt_tx_cookie, |
| roc->chan, GFP_KERNEL); |
| |
| list_del(&roc->list); |
| kfree(roc); |
| } |
| |
| static unsigned long ieee80211_end_finished_rocs(struct ieee80211_local *local, |
| unsigned long now) |
| { |
| struct ieee80211_roc_work *roc, *tmp; |
| long remaining_dur_min = LONG_MAX; |
| |
| lockdep_assert_wiphy(local->hw.wiphy); |
| |
| list_for_each_entry_safe(roc, tmp, &local->roc_list, list) { |
| long remaining; |
| |
| if (!roc->started) |
| break; |
| |
| remaining = roc->start_time + |
| msecs_to_jiffies(roc->duration) - |
| now; |
| |
| /* In case of HW ROC, it is possible that the HW finished the |
| * ROC session before the actual requested time. In such a case |
| * end the ROC session (disregarding the remaining time). |
| */ |
| if (roc->abort || roc->hw_begun || remaining <= 0) |
| ieee80211_roc_notify_destroy(roc); |
| else |
| remaining_dur_min = min(remaining_dur_min, remaining); |
| } |
| |
| return remaining_dur_min; |
| } |
| |
| static bool ieee80211_recalc_sw_work(struct ieee80211_local *local, |
| unsigned long now) |
| { |
| long dur = ieee80211_end_finished_rocs(local, now); |
| |
| if (dur == LONG_MAX) |
| return false; |
| |
| wiphy_delayed_work_queue(local->hw.wiphy, &local->roc_work, dur); |
| return true; |
| } |
| |
| static void ieee80211_handle_roc_started(struct ieee80211_roc_work *roc, |
| unsigned long start_time) |
| { |
| if (WARN_ON(roc->notified)) |
| return; |
| |
| roc->start_time = start_time; |
| roc->started = true; |
| |
| if (roc->mgmt_tx_cookie) { |
| if (!WARN_ON(!roc->frame)) { |
| ieee80211_tx_skb_tid_band(roc->sdata, roc->frame, 7, |
| roc->chan->band); |
| roc->frame = NULL; |
| } |
| } else { |
| cfg80211_ready_on_channel(&roc->sdata->wdev, roc->cookie, |
| roc->chan, roc->req_duration, |
| GFP_KERNEL); |
| } |
| |
| roc->notified = true; |
| } |
| |
| static void ieee80211_hw_roc_start(struct wiphy *wiphy, struct wiphy_work *work) |
| { |
| struct ieee80211_local *local = |
| container_of(work, struct ieee80211_local, hw_roc_start); |
| struct ieee80211_roc_work *roc; |
| |
| lockdep_assert_wiphy(local->hw.wiphy); |
| |
| list_for_each_entry(roc, &local->roc_list, list) { |
| if (!roc->started) |
| break; |
| |
| roc->hw_begun = true; |
| ieee80211_handle_roc_started(roc, local->hw_roc_start_time); |
| } |
| } |
| |
| void ieee80211_ready_on_channel(struct ieee80211_hw *hw) |
| { |
| struct ieee80211_local *local = hw_to_local(hw); |
| |
| local->hw_roc_start_time = jiffies; |
| |
| trace_api_ready_on_channel(local); |
| |
| wiphy_work_queue(hw->wiphy, &local->hw_roc_start); |
| } |
| EXPORT_SYMBOL_GPL(ieee80211_ready_on_channel); |
| |
| static void _ieee80211_start_next_roc(struct ieee80211_local *local) |
| { |
| struct ieee80211_roc_work *roc, *tmp; |
| enum ieee80211_roc_type type; |
| u32 min_dur, max_dur; |
| |
| lockdep_assert_wiphy(local->hw.wiphy); |
| |
| if (WARN_ON(list_empty(&local->roc_list))) |
| return; |
| |
| roc = list_first_entry(&local->roc_list, struct ieee80211_roc_work, |
| list); |
| |
| if (WARN_ON(roc->started)) |
| return; |
| |
| min_dur = roc->duration; |
| max_dur = roc->duration; |
| type = roc->type; |
| |
| list_for_each_entry(tmp, &local->roc_list, list) { |
| if (tmp == roc) |
| continue; |
| if (tmp->sdata != roc->sdata || tmp->chan != roc->chan) |
| break; |
| max_dur = max(tmp->duration, max_dur); |
| min_dur = min(tmp->duration, min_dur); |
| type = max(tmp->type, type); |
| } |
| |
| if (local->ops->remain_on_channel) { |
| int ret = drv_remain_on_channel(local, roc->sdata, roc->chan, |
| max_dur, type); |
| |
| if (ret) { |
| wiphy_warn(local->hw.wiphy, |
| "failed to start next HW ROC (%d)\n", ret); |
| /* |
| * queue the work struct again to avoid recursion |
| * when multiple failures occur |
| */ |
| list_for_each_entry(tmp, &local->roc_list, list) { |
| if (tmp->sdata != roc->sdata || |
| tmp->chan != roc->chan) |
| break; |
| tmp->started = true; |
| tmp->abort = true; |
| } |
| wiphy_work_queue(local->hw.wiphy, &local->hw_roc_done); |
| return; |
| } |
| |
| /* we'll notify about the start once the HW calls back */ |
| list_for_each_entry(tmp, &local->roc_list, list) { |
| if (tmp->sdata != roc->sdata || tmp->chan != roc->chan) |
| break; |
| tmp->started = true; |
| } |
| } else { |
| /* If actually operating on the desired channel (with at least |
| * 20 MHz channel width) don't stop all the operations but still |
| * treat it as though the ROC operation started properly, so |
| * other ROC operations won't interfere with this one. |
| * |
| * Note: scan can't run, tmp_channel is what we use, so this |
| * must be the currently active channel. |
| */ |
| roc->on_channel = roc->chan == local->hw.conf.chandef.chan && |
| local->hw.conf.chandef.width != NL80211_CHAN_WIDTH_5 && |
| local->hw.conf.chandef.width != NL80211_CHAN_WIDTH_10; |
| |
| /* start this ROC */ |
| ieee80211_recalc_idle(local); |
| |
| if (!roc->on_channel) { |
| ieee80211_offchannel_stop_vifs(local); |
| |
| local->tmp_channel = roc->chan; |
| ieee80211_hw_conf_chan(local); |
| } |
| |
| wiphy_delayed_work_queue(local->hw.wiphy, &local->roc_work, |
| msecs_to_jiffies(min_dur)); |
| |
| /* tell userspace or send frame(s) */ |
| list_for_each_entry(tmp, &local->roc_list, list) { |
| if (tmp->sdata != roc->sdata || tmp->chan != roc->chan) |
| break; |
| |
| tmp->on_channel = roc->on_channel; |
| ieee80211_handle_roc_started(tmp, jiffies); |
| } |
| } |
| } |
| |
| void ieee80211_start_next_roc(struct ieee80211_local *local) |
| { |
| struct ieee80211_roc_work *roc; |
| |
| lockdep_assert_wiphy(local->hw.wiphy); |
| |
| if (list_empty(&local->roc_list)) { |
| ieee80211_run_deferred_scan(local); |
| return; |
| } |
| |
| /* defer roc if driver is not started (i.e. during reconfig) */ |
| if (local->in_reconfig) |
| return; |
| |
| roc = list_first_entry(&local->roc_list, struct ieee80211_roc_work, |
| list); |
| |
| if (WARN_ON_ONCE(roc->started)) |
| return; |
| |
| if (local->ops->remain_on_channel) { |
| _ieee80211_start_next_roc(local); |
| } else { |
| /* delay it a bit */ |
| wiphy_delayed_work_queue(local->hw.wiphy, &local->roc_work, |
| round_jiffies_relative(HZ / 2)); |
| } |
| } |
| |
| void ieee80211_reconfig_roc(struct ieee80211_local *local) |
| { |
| struct ieee80211_roc_work *roc, *tmp; |
| |
| /* |
| * In the software implementation can just continue with the |
| * interruption due to reconfig, roc_work is still queued if |
| * needed. |
| */ |
| if (!local->ops->remain_on_channel) |
| return; |
| |
| /* flush work so nothing from the driver is still pending */ |
| wiphy_work_flush(local->hw.wiphy, &local->hw_roc_start); |
| wiphy_work_flush(local->hw.wiphy, &local->hw_roc_done); |
| |
| list_for_each_entry_safe(roc, tmp, &local->roc_list, list) { |
| if (!roc->started) |
| break; |
| |
| if (!roc->hw_begun) { |
| /* it didn't start in HW yet, so we can restart it */ |
| roc->started = false; |
| continue; |
| } |
| |
| /* otherwise destroy it and tell userspace */ |
| ieee80211_roc_notify_destroy(roc); |
| } |
| |
| ieee80211_start_next_roc(local); |
| } |
| |
| static void __ieee80211_roc_work(struct ieee80211_local *local) |
| { |
| struct ieee80211_roc_work *roc; |
| bool on_channel; |
| |
| lockdep_assert_wiphy(local->hw.wiphy); |
| |
| if (WARN_ON(local->ops->remain_on_channel)) |
| return; |
| |
| roc = list_first_entry_or_null(&local->roc_list, |
| struct ieee80211_roc_work, list); |
| if (!roc) |
| return; |
| |
| if (!roc->started) { |
| WARN_ON(!local->emulate_chanctx); |
| _ieee80211_start_next_roc(local); |
| } else { |
| on_channel = roc->on_channel; |
| if (ieee80211_recalc_sw_work(local, jiffies)) |
| return; |
| |
| /* careful - roc pointer became invalid during recalc */ |
| |
| if (!on_channel) { |
| ieee80211_flush_queues(local, NULL, false); |
| |
| local->tmp_channel = NULL; |
| ieee80211_hw_conf_chan(local); |
| |
| ieee80211_offchannel_return(local); |
| } |
| |
| ieee80211_recalc_idle(local); |
| ieee80211_start_next_roc(local); |
| } |
| } |
| |
| static void ieee80211_roc_work(struct wiphy *wiphy, struct wiphy_work *work) |
| { |
| struct ieee80211_local *local = |
| container_of(work, struct ieee80211_local, roc_work.work); |
| |
| lockdep_assert_wiphy(local->hw.wiphy); |
| |
| __ieee80211_roc_work(local); |
| } |
| |
| static void ieee80211_hw_roc_done(struct wiphy *wiphy, struct wiphy_work *work) |
| { |
| struct ieee80211_local *local = |
| container_of(work, struct ieee80211_local, hw_roc_done); |
| |
| lockdep_assert_wiphy(local->hw.wiphy); |
| |
| ieee80211_end_finished_rocs(local, jiffies); |
| |
| /* if there's another roc, start it now */ |
| ieee80211_start_next_roc(local); |
| } |
| |
| void ieee80211_remain_on_channel_expired(struct ieee80211_hw *hw) |
| { |
| struct ieee80211_local *local = hw_to_local(hw); |
| |
| trace_api_remain_on_channel_expired(local); |
| |
| wiphy_work_queue(hw->wiphy, &local->hw_roc_done); |
| } |
| EXPORT_SYMBOL_GPL(ieee80211_remain_on_channel_expired); |
| |
| static bool |
| ieee80211_coalesce_hw_started_roc(struct ieee80211_local *local, |
| struct ieee80211_roc_work *new_roc, |
| struct ieee80211_roc_work *cur_roc) |
| { |
| unsigned long now = jiffies; |
| unsigned long remaining; |
| |
| if (WARN_ON(!cur_roc->started)) |
| return false; |
| |
| /* if it was scheduled in the hardware, but not started yet, |
| * we can only combine if the older one had a longer duration |
| */ |
| if (!cur_roc->hw_begun && new_roc->duration > cur_roc->duration) |
| return false; |
| |
| remaining = cur_roc->start_time + |
| msecs_to_jiffies(cur_roc->duration) - |
| now; |
| |
| /* if it doesn't fit entirely, schedule a new one */ |
| if (new_roc->duration > jiffies_to_msecs(remaining)) |
| return false; |
| |
| /* add just after the current one so we combine their finish later */ |
| list_add(&new_roc->list, &cur_roc->list); |
| |
| /* if the existing one has already begun then let this one also |
| * begin, otherwise they'll both be marked properly by the work |
| * struct that runs once the driver notifies us of the beginning |
| */ |
| if (cur_roc->hw_begun) { |
| new_roc->hw_begun = true; |
| ieee80211_handle_roc_started(new_roc, now); |
| } |
| |
| return true; |
| } |
| |
| static int ieee80211_start_roc_work(struct ieee80211_local *local, |
| struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_channel *channel, |
| unsigned int duration, u64 *cookie, |
| struct sk_buff *txskb, |
| enum ieee80211_roc_type type) |
| { |
| struct ieee80211_roc_work *roc, *tmp; |
| bool queued = false, combine_started = true; |
| int ret; |
| |
| lockdep_assert_wiphy(local->hw.wiphy); |
| |
| if (channel->freq_offset) |
| /* this may work, but is untested */ |
| return -EOPNOTSUPP; |
| |
| if (!local->emulate_chanctx && !local->ops->remain_on_channel) |
| return -EOPNOTSUPP; |
| |
| roc = kzalloc(sizeof(*roc), GFP_KERNEL); |
| if (!roc) |
| return -ENOMEM; |
| |
| /* |
| * If the duration is zero, then the driver |
| * wouldn't actually do anything. Set it to |
| * 10 for now. |
| * |
| * TODO: cancel the off-channel operation |
| * when we get the SKB's TX status and |
| * the wait time was zero before. |
| */ |
| if (!duration) |
| duration = 10; |
| |
| roc->chan = channel; |
| roc->duration = duration; |
| roc->req_duration = duration; |
| roc->frame = txskb; |
| roc->type = type; |
| roc->sdata = sdata; |
| |
| /* |
| * cookie is either the roc cookie (for normal roc) |
| * or the SKB (for mgmt TX) |
| */ |
| if (!txskb) { |
| roc->cookie = ieee80211_mgmt_tx_cookie(local); |
| *cookie = roc->cookie; |
| } else { |
| roc->mgmt_tx_cookie = *cookie; |
| } |
| |
| /* if there's no need to queue, handle it immediately */ |
| if (list_empty(&local->roc_list) && |
| !local->scanning && !ieee80211_is_radar_required(local)) { |
| /* if not HW assist, just queue & schedule work */ |
| if (!local->ops->remain_on_channel) { |
| list_add_tail(&roc->list, &local->roc_list); |
| wiphy_delayed_work_queue(local->hw.wiphy, |
| &local->roc_work, 0); |
| } else { |
| /* otherwise actually kick it off here |
| * (for error handling) |
| */ |
| ret = drv_remain_on_channel(local, sdata, channel, |
| duration, type); |
| if (ret) { |
| kfree(roc); |
| return ret; |
| } |
| roc->started = true; |
| list_add_tail(&roc->list, &local->roc_list); |
| } |
| |
| return 0; |
| } |
| |
| /* otherwise handle queueing */ |
| |
| list_for_each_entry(tmp, &local->roc_list, list) { |
| if (tmp->chan != channel || tmp->sdata != sdata) |
| continue; |
| |
| /* |
| * Extend this ROC if possible: If it hasn't started, add |
| * just after the new one to combine. |
| */ |
| if (!tmp->started) { |
| list_add(&roc->list, &tmp->list); |
| queued = true; |
| break; |
| } |
| |
| if (!combine_started) |
| continue; |
| |
| if (!local->ops->remain_on_channel) { |
| /* If there's no hardware remain-on-channel, and |
| * doing so won't push us over the maximum r-o-c |
| * we allow, then we can just add the new one to |
| * the list and mark it as having started now. |
| * If it would push over the limit, don't try to |
| * combine with other started ones (that haven't |
| * been running as long) but potentially sort it |
| * with others that had the same fate. |
| */ |
| unsigned long now = jiffies; |
| u32 elapsed = jiffies_to_msecs(now - tmp->start_time); |
| struct wiphy *wiphy = local->hw.wiphy; |
| u32 max_roc = wiphy->max_remain_on_channel_duration; |
| |
| if (elapsed + roc->duration > max_roc) { |
| combine_started = false; |
| continue; |
| } |
| |
| list_add(&roc->list, &tmp->list); |
| queued = true; |
| roc->on_channel = tmp->on_channel; |
| ieee80211_handle_roc_started(roc, now); |
| ieee80211_recalc_sw_work(local, now); |
| break; |
| } |
| |
| queued = ieee80211_coalesce_hw_started_roc(local, roc, tmp); |
| if (queued) |
| break; |
| /* if it wasn't queued, perhaps it can be combined with |
| * another that also couldn't get combined previously, |
| * but no need to check for already started ones, since |
| * that can't work. |
| */ |
| combine_started = false; |
| } |
| |
| if (!queued) |
| list_add_tail(&roc->list, &local->roc_list); |
| |
| return 0; |
| } |
| |
| int ieee80211_remain_on_channel(struct wiphy *wiphy, struct wireless_dev *wdev, |
| struct ieee80211_channel *chan, |
| unsigned int duration, u64 *cookie) |
| { |
| struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); |
| struct ieee80211_local *local = sdata->local; |
| |
| lockdep_assert_wiphy(local->hw.wiphy); |
| |
| return ieee80211_start_roc_work(local, sdata, chan, |
| duration, cookie, NULL, |
| IEEE80211_ROC_TYPE_NORMAL); |
| } |
| |
| static int ieee80211_cancel_roc(struct ieee80211_local *local, |
| u64 cookie, bool mgmt_tx) |
| { |
| struct ieee80211_roc_work *roc, *tmp, *found = NULL; |
| int ret; |
| |
| lockdep_assert_wiphy(local->hw.wiphy); |
| |
| if (!cookie) |
| return -ENOENT; |
| |
| wiphy_work_flush(local->hw.wiphy, &local->hw_roc_start); |
| |
| list_for_each_entry_safe(roc, tmp, &local->roc_list, list) { |
| if (!mgmt_tx && roc->cookie != cookie) |
| continue; |
| else if (mgmt_tx && roc->mgmt_tx_cookie != cookie) |
| continue; |
| |
| found = roc; |
| break; |
| } |
| |
| if (!found) { |
| return -ENOENT; |
| } |
| |
| if (!found->started) { |
| ieee80211_roc_notify_destroy(found); |
| goto out_unlock; |
| } |
| |
| if (local->ops->remain_on_channel) { |
| ret = drv_cancel_remain_on_channel(local, roc->sdata); |
| if (WARN_ON_ONCE(ret)) { |
| return ret; |
| } |
| |
| /* |
| * We could be racing against the notification from the driver: |
| * + driver is handling the notification on CPU0 |
| * + user space is cancelling the remain on channel and |
| * schedules the hw_roc_done worker. |
| * |
| * Now hw_roc_done might start to run after the next roc will |
| * start and mac80211 will think that this second roc has |
| * ended prematurely. |
| * Cancel the work to make sure that all the pending workers |
| * have completed execution. |
| * Note that this assumes that by the time the driver returns |
| * from drv_cancel_remain_on_channel, it has completed all |
| * the processing of related notifications. |
| */ |
| wiphy_work_cancel(local->hw.wiphy, &local->hw_roc_done); |
| |
| /* TODO: |
| * if multiple items were combined here then we really shouldn't |
| * cancel them all - we should wait for as much time as needed |
| * for the longest remaining one, and only then cancel ... |
| */ |
| list_for_each_entry_safe(roc, tmp, &local->roc_list, list) { |
| if (!roc->started) |
| break; |
| if (roc == found) |
| found = NULL; |
| ieee80211_roc_notify_destroy(roc); |
| } |
| |
| /* that really must not happen - it was started */ |
| WARN_ON(found); |
| |
| ieee80211_start_next_roc(local); |
| } else { |
| /* go through work struct to return to the operating channel */ |
| found->abort = true; |
| wiphy_delayed_work_queue(local->hw.wiphy, &local->roc_work, 0); |
| } |
| |
| out_unlock: |
| |
| return 0; |
| } |
| |
| int ieee80211_cancel_remain_on_channel(struct wiphy *wiphy, |
| struct wireless_dev *wdev, u64 cookie) |
| { |
| struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); |
| struct ieee80211_local *local = sdata->local; |
| |
| return ieee80211_cancel_roc(local, cookie, false); |
| } |
| |
| int ieee80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, |
| struct cfg80211_mgmt_tx_params *params, u64 *cookie) |
| { |
| struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); |
| struct ieee80211_local *local = sdata->local; |
| struct sk_buff *skb; |
| struct sta_info *sta = NULL; |
| const struct ieee80211_mgmt *mgmt = (void *)params->buf; |
| bool need_offchan = false; |
| bool mlo_sta = false; |
| int link_id = -1; |
| u32 flags; |
| int ret; |
| u8 *data; |
| |
| lockdep_assert_wiphy(local->hw.wiphy); |
| |
| if (params->dont_wait_for_ack) |
| flags = IEEE80211_TX_CTL_NO_ACK; |
| else |
| flags = IEEE80211_TX_INTFL_NL80211_FRAME_TX | |
| IEEE80211_TX_CTL_REQ_TX_STATUS; |
| |
| if (params->no_cck) |
| flags |= IEEE80211_TX_CTL_NO_CCK_RATE; |
| |
| switch (sdata->vif.type) { |
| case NL80211_IFTYPE_ADHOC: |
| if (!sdata->vif.cfg.ibss_joined) |
| need_offchan = true; |
| #ifdef CONFIG_MAC80211_MESH |
| fallthrough; |
| case NL80211_IFTYPE_MESH_POINT: |
| if (ieee80211_vif_is_mesh(&sdata->vif) && |
| !sdata->u.mesh.mesh_id_len) |
| need_offchan = true; |
| #endif |
| fallthrough; |
| case NL80211_IFTYPE_AP: |
| case NL80211_IFTYPE_AP_VLAN: |
| case NL80211_IFTYPE_P2P_GO: |
| if (sdata->vif.type != NL80211_IFTYPE_ADHOC && |
| !ieee80211_vif_is_mesh(&sdata->vif) && |
| !sdata->bss->active) |
| need_offchan = true; |
| |
| rcu_read_lock(); |
| sta = sta_info_get_bss(sdata, mgmt->da); |
| mlo_sta = sta && sta->sta.mlo; |
| |
| if (!ieee80211_is_action(mgmt->frame_control) || |
| mgmt->u.action.category == WLAN_CATEGORY_PUBLIC || |
| mgmt->u.action.category == WLAN_CATEGORY_SELF_PROTECTED || |
| mgmt->u.action.category == WLAN_CATEGORY_SPECTRUM_MGMT) { |
| rcu_read_unlock(); |
| break; |
| } |
| |
| if (!sta) { |
| rcu_read_unlock(); |
| return -ENOLINK; |
| } |
| if (params->link_id >= 0 && |
| !(sta->sta.valid_links & BIT(params->link_id))) { |
| rcu_read_unlock(); |
| return -ENOLINK; |
| } |
| link_id = params->link_id; |
| rcu_read_unlock(); |
| break; |
| case NL80211_IFTYPE_STATION: |
| case NL80211_IFTYPE_P2P_CLIENT: |
| if (!sdata->u.mgd.associated || |
| (params->offchan && params->wait && |
| local->ops->remain_on_channel && |
| memcmp(sdata->vif.cfg.ap_addr, mgmt->bssid, ETH_ALEN))) { |
| need_offchan = true; |
| } else if (sdata->u.mgd.associated && |
| ether_addr_equal(sdata->vif.cfg.ap_addr, mgmt->da)) { |
| sta = sta_info_get_bss(sdata, mgmt->da); |
| mlo_sta = sta && sta->sta.mlo; |
| } |
| break; |
| case NL80211_IFTYPE_P2P_DEVICE: |
| need_offchan = true; |
| break; |
| case NL80211_IFTYPE_NAN: |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| /* configurations requiring offchan cannot work if no channel has been |
| * specified |
| */ |
| if (need_offchan && !params->chan) |
| return -EINVAL; |
| |
| /* Check if the operating channel is the requested channel */ |
| if (!params->chan && mlo_sta) { |
| need_offchan = false; |
| } else if (!need_offchan) { |
| struct ieee80211_chanctx_conf *chanctx_conf = NULL; |
| int i; |
| |
| rcu_read_lock(); |
| /* Check all the links first */ |
| for (i = 0; i < ARRAY_SIZE(sdata->vif.link_conf); i++) { |
| struct ieee80211_bss_conf *conf; |
| |
| conf = rcu_dereference(sdata->vif.link_conf[i]); |
| if (!conf) |
| continue; |
| |
| chanctx_conf = rcu_dereference(conf->chanctx_conf); |
| if (!chanctx_conf) |
| continue; |
| |
| if (mlo_sta && params->chan == chanctx_conf->def.chan && |
| ether_addr_equal(sdata->vif.addr, mgmt->sa)) { |
| link_id = i; |
| break; |
| } |
| |
| if (ether_addr_equal(conf->addr, mgmt->sa)) { |
| /* If userspace requested Tx on a specific link |
| * use the same link id if the link bss is matching |
| * the requested chan. |
| */ |
| if (sdata->vif.valid_links && |
| params->link_id >= 0 && params->link_id == i && |
| params->chan == chanctx_conf->def.chan) |
| link_id = i; |
| |
| break; |
| } |
| |
| chanctx_conf = NULL; |
| } |
| |
| if (chanctx_conf) { |
| need_offchan = params->chan && |
| (params->chan != |
| chanctx_conf->def.chan); |
| } else { |
| need_offchan = true; |
| } |
| rcu_read_unlock(); |
| } |
| |
| if (need_offchan && !params->offchan) { |
| ret = -EBUSY; |
| goto out_unlock; |
| } |
| |
| skb = dev_alloc_skb(local->hw.extra_tx_headroom + params->len); |
| if (!skb) { |
| ret = -ENOMEM; |
| goto out_unlock; |
| } |
| skb_reserve(skb, local->hw.extra_tx_headroom); |
| |
| data = skb_put_data(skb, params->buf, params->len); |
| |
| /* Update CSA counters */ |
| if (sdata->vif.bss_conf.csa_active && |
| (sdata->vif.type == NL80211_IFTYPE_AP || |
| sdata->vif.type == NL80211_IFTYPE_MESH_POINT || |
| sdata->vif.type == NL80211_IFTYPE_ADHOC) && |
| params->n_csa_offsets) { |
| int i; |
| struct beacon_data *beacon = NULL; |
| |
| rcu_read_lock(); |
| |
| if (sdata->vif.type == NL80211_IFTYPE_AP) |
| beacon = rcu_dereference(sdata->deflink.u.ap.beacon); |
| else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) |
| beacon = rcu_dereference(sdata->u.ibss.presp); |
| else if (ieee80211_vif_is_mesh(&sdata->vif)) |
| beacon = rcu_dereference(sdata->u.mesh.beacon); |
| |
| if (beacon) |
| for (i = 0; i < params->n_csa_offsets; i++) |
| data[params->csa_offsets[i]] = |
| beacon->cntdwn_current_counter; |
| |
| rcu_read_unlock(); |
| } |
| |
| IEEE80211_SKB_CB(skb)->flags = flags; |
| IEEE80211_SKB_CB(skb)->control.flags |= IEEE80211_TX_CTRL_DONT_USE_RATE_MASK; |
| |
| skb->dev = sdata->dev; |
| |
| if (!params->dont_wait_for_ack) { |
| /* make a copy to preserve the frame contents |
| * in case of encryption. |
| */ |
| ret = ieee80211_attach_ack_skb(local, skb, cookie, GFP_KERNEL); |
| if (ret) { |
| kfree_skb(skb); |
| goto out_unlock; |
| } |
| } else { |
| /* Assign a dummy non-zero cookie, it's not sent to |
| * userspace in this case but we rely on its value |
| * internally in the need_offchan case to distinguish |
| * mgmt-tx from remain-on-channel. |
| */ |
| *cookie = 0xffffffff; |
| } |
| |
| if (!need_offchan) { |
| ieee80211_tx_skb_tid(sdata, skb, 7, link_id); |
| ret = 0; |
| goto out_unlock; |
| } |
| |
| IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_TX_OFFCHAN | |
| IEEE80211_TX_INTFL_OFFCHAN_TX_OK; |
| if (ieee80211_hw_check(&local->hw, QUEUE_CONTROL)) |
| IEEE80211_SKB_CB(skb)->hw_queue = |
| local->hw.offchannel_tx_hw_queue; |
| |
| /* This will handle all kinds of coalescing and immediate TX */ |
| ret = ieee80211_start_roc_work(local, sdata, params->chan, |
| params->wait, cookie, skb, |
| IEEE80211_ROC_TYPE_MGMT_TX); |
| if (ret) |
| ieee80211_free_txskb(&local->hw, skb); |
| out_unlock: |
| return ret; |
| } |
| |
| int ieee80211_mgmt_tx_cancel_wait(struct wiphy *wiphy, |
| struct wireless_dev *wdev, u64 cookie) |
| { |
| struct ieee80211_local *local = wiphy_priv(wiphy); |
| |
| return ieee80211_cancel_roc(local, cookie, true); |
| } |
| |
| void ieee80211_roc_setup(struct ieee80211_local *local) |
| { |
| wiphy_work_init(&local->hw_roc_start, ieee80211_hw_roc_start); |
| wiphy_work_init(&local->hw_roc_done, ieee80211_hw_roc_done); |
| wiphy_delayed_work_init(&local->roc_work, ieee80211_roc_work); |
| INIT_LIST_HEAD(&local->roc_list); |
| } |
| |
| void ieee80211_roc_purge(struct ieee80211_local *local, |
| struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_roc_work *roc, *tmp; |
| bool work_to_do = false; |
| |
| lockdep_assert_wiphy(local->hw.wiphy); |
| |
| list_for_each_entry_safe(roc, tmp, &local->roc_list, list) { |
| if (sdata && roc->sdata != sdata) |
| continue; |
| |
| if (roc->started) { |
| if (local->ops->remain_on_channel) { |
| /* can race, so ignore return value */ |
| drv_cancel_remain_on_channel(local, roc->sdata); |
| ieee80211_roc_notify_destroy(roc); |
| } else { |
| roc->abort = true; |
| work_to_do = true; |
| } |
| } else { |
| ieee80211_roc_notify_destroy(roc); |
| } |
| } |
| if (work_to_do) |
| __ieee80211_roc_work(local); |
| } |