| // SPDX-License-Identifier: GPL-2.0-only |
| // |
| // Common code for Cirrus Logic Smart Amplifiers |
| // |
| // Copyright (C) 2024 Cirrus Logic, Inc. and |
| // Cirrus Logic International Semiconductor Ltd. |
| |
| #include <asm/byteorder.h> |
| #include <kunit/static_stub.h> |
| #include <linux/dev_printk.h> |
| #include <linux/efi.h> |
| #include <linux/firmware/cirrus/cs_dsp.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/types.h> |
| #include <sound/cs-amp-lib.h> |
| |
| #define CS_AMP_CAL_GUID \ |
| EFI_GUID(0x02f9af02, 0x7734, 0x4233, 0xb4, 0x3d, 0x93, 0xfe, 0x5a, 0xa3, 0x5d, 0xb3) |
| |
| #define CS_AMP_CAL_NAME L"CirrusSmartAmpCalibrationData" |
| |
| static int cs_amp_write_cal_coeff(struct cs_dsp *dsp, |
| const struct cirrus_amp_cal_controls *controls, |
| const char *ctl_name, u32 val) |
| { |
| struct cs_dsp_coeff_ctl *cs_ctl; |
| __be32 beval = cpu_to_be32(val); |
| int ret; |
| |
| KUNIT_STATIC_STUB_REDIRECT(cs_amp_write_cal_coeff, dsp, controls, ctl_name, val); |
| |
| if (IS_REACHABLE(CONFIG_FW_CS_DSP)) { |
| mutex_lock(&dsp->pwr_lock); |
| cs_ctl = cs_dsp_get_ctl(dsp, ctl_name, controls->mem_region, controls->alg_id); |
| ret = cs_dsp_coeff_write_ctrl(cs_ctl, 0, &beval, sizeof(beval)); |
| mutex_unlock(&dsp->pwr_lock); |
| |
| if (ret < 0) { |
| dev_err(dsp->dev, "Failed to write to '%s': %d\n", ctl_name, ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| return -ENODEV; |
| } |
| |
| static int _cs_amp_write_cal_coeffs(struct cs_dsp *dsp, |
| const struct cirrus_amp_cal_controls *controls, |
| const struct cirrus_amp_cal_data *data) |
| { |
| int ret; |
| |
| dev_dbg(dsp->dev, "Calibration: Ambient=%#x, Status=%#x, CalR=%d\n", |
| data->calAmbient, data->calStatus, data->calR); |
| |
| if (list_empty(&dsp->ctl_list)) { |
| dev_info(dsp->dev, "Calibration disabled due to missing firmware controls\n"); |
| return -ENOENT; |
| } |
| |
| ret = cs_amp_write_cal_coeff(dsp, controls, controls->ambient, data->calAmbient); |
| if (ret) |
| return ret; |
| |
| ret = cs_amp_write_cal_coeff(dsp, controls, controls->calr, data->calR); |
| if (ret) |
| return ret; |
| |
| ret = cs_amp_write_cal_coeff(dsp, controls, controls->status, data->calStatus); |
| if (ret) |
| return ret; |
| |
| ret = cs_amp_write_cal_coeff(dsp, controls, controls->checksum, data->calR + 1); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| /** |
| * cs_amp_write_cal_coeffs - Write calibration data to firmware controls. |
| * @dsp: Pointer to struct cs_dsp. |
| * @controls: Pointer to definition of firmware controls to be written. |
| * @data: Pointer to calibration data. |
| * |
| * Returns: 0 on success, else negative error value. |
| */ |
| int cs_amp_write_cal_coeffs(struct cs_dsp *dsp, |
| const struct cirrus_amp_cal_controls *controls, |
| const struct cirrus_amp_cal_data *data) |
| { |
| if (IS_REACHABLE(CONFIG_FW_CS_DSP) || IS_ENABLED(CONFIG_SND_SOC_CS_AMP_LIB_TEST)) |
| return _cs_amp_write_cal_coeffs(dsp, controls, data); |
| else |
| return -ENODEV; |
| } |
| EXPORT_SYMBOL_NS_GPL(cs_amp_write_cal_coeffs, SND_SOC_CS_AMP_LIB); |
| |
| static efi_status_t cs_amp_get_efi_variable(efi_char16_t *name, |
| efi_guid_t *guid, |
| unsigned long *size, |
| void *buf) |
| { |
| u32 attr; |
| |
| KUNIT_STATIC_STUB_REDIRECT(cs_amp_get_efi_variable, name, guid, size, buf); |
| |
| if (efi_rt_services_supported(EFI_RT_SUPPORTED_GET_VARIABLE)) |
| return efi.get_variable(name, guid, &attr, size, buf); |
| |
| return EFI_NOT_FOUND; |
| } |
| |
| static struct cirrus_amp_efi_data *cs_amp_get_cal_efi_buffer(struct device *dev) |
| { |
| struct cirrus_amp_efi_data *efi_data; |
| unsigned long data_size = 0; |
| u8 *data; |
| efi_status_t status; |
| int ret; |
| |
| /* Get real size of UEFI variable */ |
| status = cs_amp_get_efi_variable(CS_AMP_CAL_NAME, &CS_AMP_CAL_GUID, &data_size, NULL); |
| if (status != EFI_BUFFER_TOO_SMALL) |
| return ERR_PTR(-ENOENT); |
| |
| if (data_size < sizeof(*efi_data)) { |
| dev_err(dev, "EFI cal variable truncated\n"); |
| return ERR_PTR(-EOVERFLOW); |
| } |
| |
| /* Get variable contents into buffer */ |
| data = kmalloc(data_size, GFP_KERNEL); |
| if (!data) |
| return ERR_PTR(-ENOMEM); |
| |
| status = cs_amp_get_efi_variable(CS_AMP_CAL_NAME, &CS_AMP_CAL_GUID, &data_size, data); |
| if (status != EFI_SUCCESS) { |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| efi_data = (struct cirrus_amp_efi_data *)data; |
| dev_dbg(dev, "Calibration: Size=%d, Amp Count=%d\n", efi_data->size, efi_data->count); |
| |
| if ((efi_data->count > 128) || |
| offsetof(struct cirrus_amp_efi_data, data[efi_data->count]) > data_size) { |
| dev_err(dev, "EFI cal variable truncated\n"); |
| ret = -EOVERFLOW; |
| goto err; |
| } |
| |
| return efi_data; |
| |
| err: |
| kfree(data); |
| dev_err(dev, "Failed to read calibration data from EFI: %d\n", ret); |
| |
| return ERR_PTR(ret); |
| } |
| |
| static u64 cs_amp_cal_target_u64(const struct cirrus_amp_cal_data *data) |
| { |
| return ((u64)data->calTarget[1] << 32) | data->calTarget[0]; |
| } |
| |
| static int _cs_amp_get_efi_calibration_data(struct device *dev, u64 target_uid, int amp_index, |
| struct cirrus_amp_cal_data *out_data) |
| { |
| struct cirrus_amp_efi_data *efi_data; |
| struct cirrus_amp_cal_data *cal = NULL; |
| int i, ret; |
| |
| efi_data = cs_amp_get_cal_efi_buffer(dev); |
| if (IS_ERR(efi_data)) |
| return PTR_ERR(efi_data); |
| |
| if (target_uid) { |
| for (i = 0; i < efi_data->count; ++i) { |
| u64 cal_target = cs_amp_cal_target_u64(&efi_data->data[i]); |
| |
| /* Skip empty entries */ |
| if (!efi_data->data[i].calTime[0] && !efi_data->data[i].calTime[1]) |
| continue; |
| |
| /* Skip entries with unpopulated silicon ID */ |
| if (cal_target == 0) |
| continue; |
| |
| if (cal_target == target_uid) { |
| cal = &efi_data->data[i]; |
| break; |
| } |
| } |
| } |
| |
| if (!cal && (amp_index >= 0) && (amp_index < efi_data->count) && |
| (efi_data->data[amp_index].calTime[0] || efi_data->data[amp_index].calTime[1])) { |
| u64 cal_target = cs_amp_cal_target_u64(&efi_data->data[amp_index]); |
| |
| /* |
| * Treat unpopulated cal_target as a wildcard. |
| * If target_uid != 0 we can only get here if cal_target == 0 |
| * or it didn't match any cal_target value. |
| * If target_uid == 0 it is a wildcard. |
| */ |
| if ((cal_target == 0) || (target_uid == 0)) |
| cal = &efi_data->data[amp_index]; |
| else |
| dev_warn(dev, "Calibration entry %d does not match silicon ID", amp_index); |
| } |
| |
| if (cal) { |
| memcpy(out_data, cal, sizeof(*out_data)); |
| ret = 0; |
| } else { |
| dev_warn(dev, "No calibration for silicon ID %#llx\n", target_uid); |
| ret = -ENOENT; |
| } |
| |
| kfree(efi_data); |
| |
| return ret; |
| } |
| |
| /** |
| * cs_amp_get_efi_calibration_data - get an entry from calibration data in EFI. |
| * @dev: struct device of the caller. |
| * @target_uid: UID to match, or zero to ignore UID matching. |
| * @amp_index: Entry index to use, or -1 to prevent lookup by index. |
| * @out_data: struct cirrus_amp_cal_data where the entry will be copied. |
| * |
| * This function can perform 3 types of lookup: |
| * |
| * (target_uid > 0, amp_index >= 0) |
| * UID search with fallback to using the array index. |
| * Search the calibration data for a non-zero calTarget that matches |
| * target_uid, and if found return that entry. Else, if the entry at |
| * [amp_index] has calTarget == 0, return that entry. Else fail. |
| * |
| * (target_uid > 0, amp_index < 0) |
| * UID search only. |
| * Search the calibration data for a non-zero calTarget that matches |
| * target_uid, and if found return that entry. Else fail. |
| * |
| * (target_uid == 0, amp_index >= 0) |
| * Array index fetch only. |
| * Return the entry at [amp_index]. |
| * |
| * An array lookup will be skipped if amp_index exceeds the number of |
| * entries in the calibration array, and in this case the return will |
| * be -ENOENT. An out-of-range amp_index does not prevent matching by |
| * target_uid - it has the same effect as passing amp_index < 0. |
| * |
| * If the EFI data is too short to be a valid entry, or the entry count |
| * in the EFI data overflows the actual length of the data, this function |
| * returns -EOVERFLOW. |
| * |
| * Return: 0 if the entry was found, -ENOENT if no entry was found, |
| * -EOVERFLOW if the EFI file is corrupt, else other error value. |
| */ |
| int cs_amp_get_efi_calibration_data(struct device *dev, u64 target_uid, int amp_index, |
| struct cirrus_amp_cal_data *out_data) |
| { |
| if (IS_ENABLED(CONFIG_EFI) || IS_ENABLED(CONFIG_SND_SOC_CS_AMP_LIB_TEST)) |
| return _cs_amp_get_efi_calibration_data(dev, target_uid, amp_index, out_data); |
| else |
| return -ENOENT; |
| } |
| EXPORT_SYMBOL_NS_GPL(cs_amp_get_efi_calibration_data, SND_SOC_CS_AMP_LIB); |
| |
| static const struct cs_amp_test_hooks cs_amp_test_hook_ptrs = { |
| .get_efi_variable = cs_amp_get_efi_variable, |
| .write_cal_coeff = cs_amp_write_cal_coeff, |
| }; |
| |
| const struct cs_amp_test_hooks * const cs_amp_test_hooks = |
| PTR_IF(IS_ENABLED(CONFIG_SND_SOC_CS_AMP_LIB_TEST), &cs_amp_test_hook_ptrs); |
| EXPORT_SYMBOL_NS_GPL(cs_amp_test_hooks, SND_SOC_CS_AMP_LIB); |
| |
| MODULE_DESCRIPTION("Cirrus Logic amplifier library"); |
| MODULE_AUTHOR("Richard Fitzgerald <rf@opensource.cirrus.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_IMPORT_NS(FW_CS_DSP); |