| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * tools/testing/selftests/kvm/lib/x86_64/svm.c |
| * Helpers used for nested SVM testing |
| * Largely inspired from KVM unit test svm.c |
| * |
| * Copyright (C) 2020, Red Hat, Inc. |
| */ |
| |
| #include "test_util.h" |
| #include "kvm_util.h" |
| #include "processor.h" |
| #include "svm_util.h" |
| |
| #define SEV_DEV_PATH "/dev/sev" |
| |
| struct gpr64_regs guest_regs; |
| u64 rflags; |
| |
| /* Allocate memory regions for nested SVM tests. |
| * |
| * Input Args: |
| * vm - The VM to allocate guest-virtual addresses in. |
| * |
| * Output Args: |
| * p_svm_gva - The guest virtual address for the struct svm_test_data. |
| * |
| * Return: |
| * Pointer to structure with the addresses of the SVM areas. |
| */ |
| struct svm_test_data * |
| vcpu_alloc_svm(struct kvm_vm *vm, vm_vaddr_t *p_svm_gva) |
| { |
| vm_vaddr_t svm_gva = vm_vaddr_alloc_page(vm); |
| struct svm_test_data *svm = addr_gva2hva(vm, svm_gva); |
| |
| svm->vmcb = (void *)vm_vaddr_alloc_page(vm); |
| svm->vmcb_hva = addr_gva2hva(vm, (uintptr_t)svm->vmcb); |
| svm->vmcb_gpa = addr_gva2gpa(vm, (uintptr_t)svm->vmcb); |
| |
| svm->save_area = (void *)vm_vaddr_alloc_page(vm); |
| svm->save_area_hva = addr_gva2hva(vm, (uintptr_t)svm->save_area); |
| svm->save_area_gpa = addr_gva2gpa(vm, (uintptr_t)svm->save_area); |
| |
| svm->msr = (void *)vm_vaddr_alloc_page(vm); |
| svm->msr_hva = addr_gva2hva(vm, (uintptr_t)svm->msr); |
| svm->msr_gpa = addr_gva2gpa(vm, (uintptr_t)svm->msr); |
| memset(svm->msr_hva, 0, getpagesize()); |
| |
| *p_svm_gva = svm_gva; |
| return svm; |
| } |
| |
| static void vmcb_set_seg(struct vmcb_seg *seg, u16 selector, |
| u64 base, u32 limit, u32 attr) |
| { |
| seg->selector = selector; |
| seg->attrib = attr; |
| seg->limit = limit; |
| seg->base = base; |
| } |
| |
| void generic_svm_setup(struct svm_test_data *svm, void *guest_rip, void *guest_rsp) |
| { |
| struct vmcb *vmcb = svm->vmcb; |
| uint64_t vmcb_gpa = svm->vmcb_gpa; |
| struct vmcb_save_area *save = &vmcb->save; |
| struct vmcb_control_area *ctrl = &vmcb->control; |
| u32 data_seg_attr = 3 | SVM_SELECTOR_S_MASK | SVM_SELECTOR_P_MASK |
| | SVM_SELECTOR_DB_MASK | SVM_SELECTOR_G_MASK; |
| u32 code_seg_attr = 9 | SVM_SELECTOR_S_MASK | SVM_SELECTOR_P_MASK |
| | SVM_SELECTOR_L_MASK | SVM_SELECTOR_G_MASK; |
| uint64_t efer; |
| |
| efer = rdmsr(MSR_EFER); |
| wrmsr(MSR_EFER, efer | EFER_SVME); |
| wrmsr(MSR_VM_HSAVE_PA, svm->save_area_gpa); |
| |
| memset(vmcb, 0, sizeof(*vmcb)); |
| asm volatile ("vmsave %0\n\t" : : "a" (vmcb_gpa) : "memory"); |
| vmcb_set_seg(&save->es, get_es(), 0, -1U, data_seg_attr); |
| vmcb_set_seg(&save->cs, get_cs(), 0, -1U, code_seg_attr); |
| vmcb_set_seg(&save->ss, get_ss(), 0, -1U, data_seg_attr); |
| vmcb_set_seg(&save->ds, get_ds(), 0, -1U, data_seg_attr); |
| vmcb_set_seg(&save->gdtr, 0, get_gdt().address, get_gdt().size, 0); |
| vmcb_set_seg(&save->idtr, 0, get_idt().address, get_idt().size, 0); |
| |
| ctrl->asid = 1; |
| save->cpl = 0; |
| save->efer = rdmsr(MSR_EFER); |
| asm volatile ("mov %%cr4, %0" : "=r"(save->cr4) : : "memory"); |
| asm volatile ("mov %%cr3, %0" : "=r"(save->cr3) : : "memory"); |
| asm volatile ("mov %%cr0, %0" : "=r"(save->cr0) : : "memory"); |
| asm volatile ("mov %%dr7, %0" : "=r"(save->dr7) : : "memory"); |
| asm volatile ("mov %%dr6, %0" : "=r"(save->dr6) : : "memory"); |
| asm volatile ("mov %%cr2, %0" : "=r"(save->cr2) : : "memory"); |
| save->g_pat = rdmsr(MSR_IA32_CR_PAT); |
| save->dbgctl = rdmsr(MSR_IA32_DEBUGCTLMSR); |
| ctrl->intercept = (1ULL << INTERCEPT_VMRUN) | |
| (1ULL << INTERCEPT_VMMCALL); |
| ctrl->msrpm_base_pa = svm->msr_gpa; |
| |
| vmcb->save.rip = (u64)guest_rip; |
| vmcb->save.rsp = (u64)guest_rsp; |
| guest_regs.rdi = (u64)svm; |
| } |
| |
| /* |
| * save/restore 64-bit general registers except rax, rip, rsp |
| * which are directly handed through the VMCB guest processor state |
| */ |
| #define SAVE_GPR_C \ |
| "xchg %%rbx, guest_regs+0x20\n\t" \ |
| "xchg %%rcx, guest_regs+0x10\n\t" \ |
| "xchg %%rdx, guest_regs+0x18\n\t" \ |
| "xchg %%rbp, guest_regs+0x30\n\t" \ |
| "xchg %%rsi, guest_regs+0x38\n\t" \ |
| "xchg %%rdi, guest_regs+0x40\n\t" \ |
| "xchg %%r8, guest_regs+0x48\n\t" \ |
| "xchg %%r9, guest_regs+0x50\n\t" \ |
| "xchg %%r10, guest_regs+0x58\n\t" \ |
| "xchg %%r11, guest_regs+0x60\n\t" \ |
| "xchg %%r12, guest_regs+0x68\n\t" \ |
| "xchg %%r13, guest_regs+0x70\n\t" \ |
| "xchg %%r14, guest_regs+0x78\n\t" \ |
| "xchg %%r15, guest_regs+0x80\n\t" |
| |
| #define LOAD_GPR_C SAVE_GPR_C |
| |
| /* |
| * selftests do not use interrupts so we dropped clgi/sti/cli/stgi |
| * for now. registers involved in LOAD/SAVE_GPR_C are eventually |
| * unmodified so they do not need to be in the clobber list. |
| */ |
| void run_guest(struct vmcb *vmcb, uint64_t vmcb_gpa) |
| { |
| asm volatile ( |
| "vmload %[vmcb_gpa]\n\t" |
| "mov rflags, %%r15\n\t" // rflags |
| "mov %%r15, 0x170(%[vmcb])\n\t" |
| "mov guest_regs, %%r15\n\t" // rax |
| "mov %%r15, 0x1f8(%[vmcb])\n\t" |
| LOAD_GPR_C |
| "vmrun %[vmcb_gpa]\n\t" |
| SAVE_GPR_C |
| "mov 0x170(%[vmcb]), %%r15\n\t" // rflags |
| "mov %%r15, rflags\n\t" |
| "mov 0x1f8(%[vmcb]), %%r15\n\t" // rax |
| "mov %%r15, guest_regs\n\t" |
| "vmsave %[vmcb_gpa]\n\t" |
| : : [vmcb] "r" (vmcb), [vmcb_gpa] "a" (vmcb_gpa) |
| : "r15", "memory"); |
| } |
| |
| /* |
| * Open SEV_DEV_PATH if available, otherwise exit the entire program. |
| * |
| * Return: |
| * The opened file descriptor of /dev/sev. |
| */ |
| int open_sev_dev_path_or_exit(void) |
| { |
| return open_path_or_exit(SEV_DEV_PATH, 0); |
| } |