| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. |
| */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/clk.h> |
| #include <linux/interconnect-provider.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| |
| #include <dt-bindings/interconnect/qcom,osm-l3.h> |
| |
| #include "sc7180.h" |
| #include "sc7280.h" |
| #include "sc8180x.h" |
| #include "sdm845.h" |
| #include "sm8150.h" |
| #include "sm8250.h" |
| |
| #define LUT_MAX_ENTRIES 40U |
| #define LUT_SRC GENMASK(31, 30) |
| #define LUT_L_VAL GENMASK(7, 0) |
| #define CLK_HW_DIV 2 |
| |
| /* OSM Register offsets */ |
| #define REG_ENABLE 0x0 |
| #define OSM_LUT_ROW_SIZE 32 |
| #define OSM_REG_FREQ_LUT 0x110 |
| #define OSM_REG_PERF_STATE 0x920 |
| |
| /* EPSS Register offsets */ |
| #define EPSS_LUT_ROW_SIZE 4 |
| #define EPSS_REG_FREQ_LUT 0x100 |
| #define EPSS_REG_PERF_STATE 0x320 |
| |
| #define OSM_L3_MAX_LINKS 1 |
| |
| #define to_osm_l3_provider(_provider) \ |
| container_of(_provider, struct qcom_osm_l3_icc_provider, provider) |
| |
| struct qcom_osm_l3_icc_provider { |
| void __iomem *base; |
| unsigned int max_state; |
| unsigned int reg_perf_state; |
| unsigned long lut_tables[LUT_MAX_ENTRIES]; |
| struct icc_provider provider; |
| }; |
| |
| /** |
| * struct qcom_osm_l3_node - Qualcomm specific interconnect nodes |
| * @name: the node name used in debugfs |
| * @links: an array of nodes where we can go next while traversing |
| * @id: a unique node identifier |
| * @num_links: the total number of @links |
| * @buswidth: width of the interconnect between a node and the bus |
| */ |
| struct qcom_osm_l3_node { |
| const char *name; |
| u16 links[OSM_L3_MAX_LINKS]; |
| u16 id; |
| u16 num_links; |
| u16 buswidth; |
| }; |
| |
| struct qcom_osm_l3_desc { |
| const struct qcom_osm_l3_node * const *nodes; |
| size_t num_nodes; |
| unsigned int lut_row_size; |
| unsigned int reg_freq_lut; |
| unsigned int reg_perf_state; |
| }; |
| |
| #define DEFINE_QNODE(_name, _id, _buswidth, ...) \ |
| static const struct qcom_osm_l3_node _name = { \ |
| .name = #_name, \ |
| .id = _id, \ |
| .buswidth = _buswidth, \ |
| .num_links = ARRAY_SIZE(((int[]){ __VA_ARGS__ })), \ |
| .links = { __VA_ARGS__ }, \ |
| } |
| |
| DEFINE_QNODE(sdm845_osm_apps_l3, SDM845_MASTER_OSM_L3_APPS, 16, SDM845_SLAVE_OSM_L3); |
| DEFINE_QNODE(sdm845_osm_l3, SDM845_SLAVE_OSM_L3, 16); |
| |
| static const struct qcom_osm_l3_node * const sdm845_osm_l3_nodes[] = { |
| [MASTER_OSM_L3_APPS] = &sdm845_osm_apps_l3, |
| [SLAVE_OSM_L3] = &sdm845_osm_l3, |
| }; |
| |
| static const struct qcom_osm_l3_desc sdm845_icc_osm_l3 = { |
| .nodes = sdm845_osm_l3_nodes, |
| .num_nodes = ARRAY_SIZE(sdm845_osm_l3_nodes), |
| .lut_row_size = OSM_LUT_ROW_SIZE, |
| .reg_freq_lut = OSM_REG_FREQ_LUT, |
| .reg_perf_state = OSM_REG_PERF_STATE, |
| }; |
| |
| DEFINE_QNODE(sc7180_osm_apps_l3, SC7180_MASTER_OSM_L3_APPS, 16, SC7180_SLAVE_OSM_L3); |
| DEFINE_QNODE(sc7180_osm_l3, SC7180_SLAVE_OSM_L3, 16); |
| |
| static const struct qcom_osm_l3_node * const sc7180_osm_l3_nodes[] = { |
| [MASTER_OSM_L3_APPS] = &sc7180_osm_apps_l3, |
| [SLAVE_OSM_L3] = &sc7180_osm_l3, |
| }; |
| |
| static const struct qcom_osm_l3_desc sc7180_icc_osm_l3 = { |
| .nodes = sc7180_osm_l3_nodes, |
| .num_nodes = ARRAY_SIZE(sc7180_osm_l3_nodes), |
| .lut_row_size = OSM_LUT_ROW_SIZE, |
| .reg_freq_lut = OSM_REG_FREQ_LUT, |
| .reg_perf_state = OSM_REG_PERF_STATE, |
| }; |
| |
| DEFINE_QNODE(sc7280_epss_apps_l3, SC7280_MASTER_EPSS_L3_APPS, 32, SC7280_SLAVE_EPSS_L3); |
| DEFINE_QNODE(sc7280_epss_l3, SC7280_SLAVE_EPSS_L3, 32); |
| |
| static const struct qcom_osm_l3_node * const sc7280_epss_l3_nodes[] = { |
| [MASTER_EPSS_L3_APPS] = &sc7280_epss_apps_l3, |
| [SLAVE_EPSS_L3_SHARED] = &sc7280_epss_l3, |
| }; |
| |
| static const struct qcom_osm_l3_desc sc7280_icc_epss_l3 = { |
| .nodes = sc7280_epss_l3_nodes, |
| .num_nodes = ARRAY_SIZE(sc7280_epss_l3_nodes), |
| .lut_row_size = EPSS_LUT_ROW_SIZE, |
| .reg_freq_lut = EPSS_REG_FREQ_LUT, |
| .reg_perf_state = EPSS_REG_PERF_STATE, |
| }; |
| |
| DEFINE_QNODE(sc8180x_osm_apps_l3, SC8180X_MASTER_OSM_L3_APPS, 32, SC8180X_SLAVE_OSM_L3); |
| DEFINE_QNODE(sc8180x_osm_l3, SC8180X_SLAVE_OSM_L3, 32); |
| |
| static const struct qcom_osm_l3_node * const sc8180x_osm_l3_nodes[] = { |
| [MASTER_OSM_L3_APPS] = &sc8180x_osm_apps_l3, |
| [SLAVE_OSM_L3] = &sc8180x_osm_l3, |
| }; |
| |
| static const struct qcom_osm_l3_desc sc8180x_icc_osm_l3 = { |
| .nodes = sc8180x_osm_l3_nodes, |
| .num_nodes = ARRAY_SIZE(sc8180x_osm_l3_nodes), |
| .lut_row_size = OSM_LUT_ROW_SIZE, |
| .reg_freq_lut = OSM_REG_FREQ_LUT, |
| .reg_perf_state = OSM_REG_PERF_STATE, |
| }; |
| |
| DEFINE_QNODE(sm8150_osm_apps_l3, SM8150_MASTER_OSM_L3_APPS, 32, SM8150_SLAVE_OSM_L3); |
| DEFINE_QNODE(sm8150_osm_l3, SM8150_SLAVE_OSM_L3, 32); |
| |
| static const struct qcom_osm_l3_node * const sm8150_osm_l3_nodes[] = { |
| [MASTER_OSM_L3_APPS] = &sm8150_osm_apps_l3, |
| [SLAVE_OSM_L3] = &sm8150_osm_l3, |
| }; |
| |
| static const struct qcom_osm_l3_desc sm8150_icc_osm_l3 = { |
| .nodes = sm8150_osm_l3_nodes, |
| .num_nodes = ARRAY_SIZE(sm8150_osm_l3_nodes), |
| .lut_row_size = OSM_LUT_ROW_SIZE, |
| .reg_freq_lut = OSM_REG_FREQ_LUT, |
| .reg_perf_state = OSM_REG_PERF_STATE, |
| }; |
| |
| DEFINE_QNODE(sm8250_epss_apps_l3, SM8250_MASTER_EPSS_L3_APPS, 32, SM8250_SLAVE_EPSS_L3); |
| DEFINE_QNODE(sm8250_epss_l3, SM8250_SLAVE_EPSS_L3, 32); |
| |
| static const struct qcom_osm_l3_node * const sm8250_epss_l3_nodes[] = { |
| [MASTER_EPSS_L3_APPS] = &sm8250_epss_apps_l3, |
| [SLAVE_EPSS_L3_SHARED] = &sm8250_epss_l3, |
| }; |
| |
| static const struct qcom_osm_l3_desc sm8250_icc_epss_l3 = { |
| .nodes = sm8250_epss_l3_nodes, |
| .num_nodes = ARRAY_SIZE(sm8250_epss_l3_nodes), |
| .lut_row_size = EPSS_LUT_ROW_SIZE, |
| .reg_freq_lut = EPSS_REG_FREQ_LUT, |
| .reg_perf_state = EPSS_REG_PERF_STATE, |
| }; |
| |
| static int qcom_osm_l3_set(struct icc_node *src, struct icc_node *dst) |
| { |
| struct qcom_osm_l3_icc_provider *qp; |
| struct icc_provider *provider; |
| const struct qcom_osm_l3_node *qn; |
| struct icc_node *n; |
| unsigned int index; |
| u32 agg_peak = 0; |
| u32 agg_avg = 0; |
| u64 rate; |
| |
| qn = src->data; |
| provider = src->provider; |
| qp = to_osm_l3_provider(provider); |
| |
| list_for_each_entry(n, &provider->nodes, node_list) |
| provider->aggregate(n, 0, n->avg_bw, n->peak_bw, |
| &agg_avg, &agg_peak); |
| |
| rate = max(agg_avg, agg_peak); |
| rate = icc_units_to_bps(rate); |
| do_div(rate, qn->buswidth); |
| |
| for (index = 0; index < qp->max_state - 1; index++) { |
| if (qp->lut_tables[index] >= rate) |
| break; |
| } |
| |
| writel_relaxed(index, qp->base + qp->reg_perf_state); |
| |
| return 0; |
| } |
| |
| static int qcom_osm_l3_remove(struct platform_device *pdev) |
| { |
| struct qcom_osm_l3_icc_provider *qp = platform_get_drvdata(pdev); |
| |
| icc_nodes_remove(&qp->provider); |
| return icc_provider_del(&qp->provider); |
| } |
| |
| static int qcom_osm_l3_probe(struct platform_device *pdev) |
| { |
| u32 info, src, lval, i, prev_freq = 0, freq; |
| static unsigned long hw_rate, xo_rate; |
| struct qcom_osm_l3_icc_provider *qp; |
| const struct qcom_osm_l3_desc *desc; |
| struct icc_onecell_data *data; |
| struct icc_provider *provider; |
| const struct qcom_osm_l3_node * const *qnodes; |
| struct icc_node *node; |
| size_t num_nodes; |
| struct clk *clk; |
| int ret; |
| |
| clk = clk_get(&pdev->dev, "xo"); |
| if (IS_ERR(clk)) |
| return PTR_ERR(clk); |
| |
| xo_rate = clk_get_rate(clk); |
| clk_put(clk); |
| |
| clk = clk_get(&pdev->dev, "alternate"); |
| if (IS_ERR(clk)) |
| return PTR_ERR(clk); |
| |
| hw_rate = clk_get_rate(clk) / CLK_HW_DIV; |
| clk_put(clk); |
| |
| qp = devm_kzalloc(&pdev->dev, sizeof(*qp), GFP_KERNEL); |
| if (!qp) |
| return -ENOMEM; |
| |
| qp->base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(qp->base)) |
| return PTR_ERR(qp->base); |
| |
| /* HW should be in enabled state to proceed */ |
| if (!(readl_relaxed(qp->base + REG_ENABLE) & 0x1)) { |
| dev_err(&pdev->dev, "error hardware not enabled\n"); |
| return -ENODEV; |
| } |
| |
| desc = device_get_match_data(&pdev->dev); |
| if (!desc) |
| return -EINVAL; |
| |
| qp->reg_perf_state = desc->reg_perf_state; |
| |
| for (i = 0; i < LUT_MAX_ENTRIES; i++) { |
| info = readl_relaxed(qp->base + desc->reg_freq_lut + |
| i * desc->lut_row_size); |
| src = FIELD_GET(LUT_SRC, info); |
| lval = FIELD_GET(LUT_L_VAL, info); |
| if (src) |
| freq = xo_rate * lval; |
| else |
| freq = hw_rate; |
| |
| /* Two of the same frequencies signify end of table */ |
| if (i > 0 && prev_freq == freq) |
| break; |
| |
| dev_dbg(&pdev->dev, "index=%d freq=%d\n", i, freq); |
| |
| qp->lut_tables[i] = freq; |
| prev_freq = freq; |
| } |
| qp->max_state = i; |
| |
| qnodes = desc->nodes; |
| num_nodes = desc->num_nodes; |
| |
| data = devm_kcalloc(&pdev->dev, num_nodes, sizeof(*node), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| provider = &qp->provider; |
| provider->dev = &pdev->dev; |
| provider->set = qcom_osm_l3_set; |
| provider->aggregate = icc_std_aggregate; |
| provider->xlate = of_icc_xlate_onecell; |
| INIT_LIST_HEAD(&provider->nodes); |
| provider->data = data; |
| |
| ret = icc_provider_add(provider); |
| if (ret) { |
| dev_err(&pdev->dev, "error adding interconnect provider\n"); |
| return ret; |
| } |
| |
| for (i = 0; i < num_nodes; i++) { |
| size_t j; |
| |
| node = icc_node_create(qnodes[i]->id); |
| if (IS_ERR(node)) { |
| ret = PTR_ERR(node); |
| goto err; |
| } |
| |
| node->name = qnodes[i]->name; |
| /* Cast away const and add it back in qcom_osm_l3_set() */ |
| node->data = (void *)qnodes[i]; |
| icc_node_add(node, provider); |
| |
| for (j = 0; j < qnodes[i]->num_links; j++) |
| icc_link_create(node, qnodes[i]->links[j]); |
| |
| data->nodes[i] = node; |
| } |
| data->num_nodes = num_nodes; |
| |
| platform_set_drvdata(pdev, qp); |
| |
| return 0; |
| err: |
| icc_nodes_remove(provider); |
| icc_provider_del(provider); |
| |
| return ret; |
| } |
| |
| static const struct of_device_id osm_l3_of_match[] = { |
| { .compatible = "qcom,sc7180-osm-l3", .data = &sc7180_icc_osm_l3 }, |
| { .compatible = "qcom,sc7280-epss-l3", .data = &sc7280_icc_epss_l3 }, |
| { .compatible = "qcom,sdm845-osm-l3", .data = &sdm845_icc_osm_l3 }, |
| { .compatible = "qcom,sm8150-osm-l3", .data = &sm8150_icc_osm_l3 }, |
| { .compatible = "qcom,sc8180x-osm-l3", .data = &sc8180x_icc_osm_l3 }, |
| { .compatible = "qcom,sm8250-epss-l3", .data = &sm8250_icc_epss_l3 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, osm_l3_of_match); |
| |
| static struct platform_driver osm_l3_driver = { |
| .probe = qcom_osm_l3_probe, |
| .remove = qcom_osm_l3_remove, |
| .driver = { |
| .name = "osm-l3", |
| .of_match_table = osm_l3_of_match, |
| .sync_state = icc_sync_state, |
| }, |
| }; |
| module_platform_driver(osm_l3_driver); |
| |
| MODULE_DESCRIPTION("Qualcomm OSM L3 interconnect driver"); |
| MODULE_LICENSE("GPL v2"); |