| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Based on Ocelot Linux port, which is |
| * Copyright 2001 MontaVista Software Inc. |
| * Author: jsun@mvista.com or jsun@junsun.net |
| * |
| * Copyright 2003 ICT CAS |
| * Author: Michael Guo <guoyi@ict.ac.cn> |
| * |
| * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology |
| * Author: Fuxin Zhang, zhangfx@lemote.com |
| * |
| * Copyright (C) 2009 Lemote Inc. |
| * Author: Wu Zhangjin, wuzhangjin@gmail.com |
| */ |
| #include <linux/export.h> |
| #include <linux/pci_ids.h> |
| #include <asm/bootinfo.h> |
| #include <loongson.h> |
| #include <boot_param.h> |
| #include <builtin_dtbs.h> |
| #include <workarounds.h> |
| |
| #define HOST_BRIDGE_CONFIG_ADDR ((void __iomem *)TO_UNCAC(0x1a000000)) |
| |
| u32 cpu_clock_freq; |
| EXPORT_SYMBOL(cpu_clock_freq); |
| struct efi_memory_map_loongson *loongson_memmap; |
| struct loongson_system_configuration loongson_sysconf; |
| |
| u64 loongson_chipcfg[MAX_PACKAGES] = {0xffffffffbfc00180}; |
| u64 loongson_chiptemp[MAX_PACKAGES]; |
| u64 loongson_freqctrl[MAX_PACKAGES]; |
| |
| unsigned long long smp_group[4]; |
| |
| const char *get_system_type(void) |
| { |
| return "Generic Loongson64 System"; |
| } |
| |
| void __init prom_init_env(void) |
| { |
| struct boot_params *boot_p; |
| struct loongson_params *loongson_p; |
| struct system_loongson *esys; |
| struct efi_cpuinfo_loongson *ecpu; |
| struct irq_source_routing_table *eirq_source; |
| u32 id; |
| u16 vendor, device; |
| |
| /* firmware arguments are initialized in head.S */ |
| boot_p = (struct boot_params *)fw_arg2; |
| loongson_p = &(boot_p->efi.smbios.lp); |
| |
| esys = (struct system_loongson *) |
| ((u64)loongson_p + loongson_p->system_offset); |
| ecpu = (struct efi_cpuinfo_loongson *) |
| ((u64)loongson_p + loongson_p->cpu_offset); |
| eirq_source = (struct irq_source_routing_table *) |
| ((u64)loongson_p + loongson_p->irq_offset); |
| loongson_memmap = (struct efi_memory_map_loongson *) |
| ((u64)loongson_p + loongson_p->memory_offset); |
| |
| cpu_clock_freq = ecpu->cpu_clock_freq; |
| loongson_sysconf.cputype = ecpu->cputype; |
| switch (ecpu->cputype) { |
| case Legacy_3A: |
| case Loongson_3A: |
| loongson_sysconf.cores_per_node = 4; |
| loongson_sysconf.cores_per_package = 4; |
| smp_group[0] = 0x900000003ff01000; |
| smp_group[1] = 0x900010003ff01000; |
| smp_group[2] = 0x900020003ff01000; |
| smp_group[3] = 0x900030003ff01000; |
| loongson_chipcfg[0] = 0x900000001fe00180; |
| loongson_chipcfg[1] = 0x900010001fe00180; |
| loongson_chipcfg[2] = 0x900020001fe00180; |
| loongson_chipcfg[3] = 0x900030001fe00180; |
| loongson_chiptemp[0] = 0x900000001fe0019c; |
| loongson_chiptemp[1] = 0x900010001fe0019c; |
| loongson_chiptemp[2] = 0x900020001fe0019c; |
| loongson_chiptemp[3] = 0x900030001fe0019c; |
| loongson_freqctrl[0] = 0x900000001fe001d0; |
| loongson_freqctrl[1] = 0x900010001fe001d0; |
| loongson_freqctrl[2] = 0x900020001fe001d0; |
| loongson_freqctrl[3] = 0x900030001fe001d0; |
| loongson_sysconf.ht_control_base = 0x90000EFDFB000000; |
| loongson_sysconf.workarounds = WORKAROUND_CPUFREQ; |
| break; |
| case Legacy_3B: |
| case Loongson_3B: |
| loongson_sysconf.cores_per_node = 4; /* One chip has 2 nodes */ |
| loongson_sysconf.cores_per_package = 8; |
| smp_group[0] = 0x900000003ff01000; |
| smp_group[1] = 0x900010003ff05000; |
| smp_group[2] = 0x900020003ff09000; |
| smp_group[3] = 0x900030003ff0d000; |
| loongson_chipcfg[0] = 0x900000001fe00180; |
| loongson_chipcfg[1] = 0x900020001fe00180; |
| loongson_chipcfg[2] = 0x900040001fe00180; |
| loongson_chipcfg[3] = 0x900060001fe00180; |
| loongson_chiptemp[0] = 0x900000001fe0019c; |
| loongson_chiptemp[1] = 0x900020001fe0019c; |
| loongson_chiptemp[2] = 0x900040001fe0019c; |
| loongson_chiptemp[3] = 0x900060001fe0019c; |
| loongson_freqctrl[0] = 0x900000001fe001d0; |
| loongson_freqctrl[1] = 0x900020001fe001d0; |
| loongson_freqctrl[2] = 0x900040001fe001d0; |
| loongson_freqctrl[3] = 0x900060001fe001d0; |
| loongson_sysconf.ht_control_base = 0x90001EFDFB000000; |
| loongson_sysconf.workarounds = WORKAROUND_CPUHOTPLUG; |
| break; |
| default: |
| loongson_sysconf.cores_per_node = 1; |
| loongson_sysconf.cores_per_package = 1; |
| loongson_chipcfg[0] = 0x900000001fe00180; |
| } |
| |
| loongson_sysconf.nr_cpus = ecpu->nr_cpus; |
| loongson_sysconf.boot_cpu_id = ecpu->cpu_startup_core_id; |
| loongson_sysconf.reserved_cpus_mask = ecpu->reserved_cores_mask; |
| if (ecpu->nr_cpus > NR_CPUS || ecpu->nr_cpus == 0) |
| loongson_sysconf.nr_cpus = NR_CPUS; |
| loongson_sysconf.nr_nodes = (loongson_sysconf.nr_cpus + |
| loongson_sysconf.cores_per_node - 1) / |
| loongson_sysconf.cores_per_node; |
| |
| if ((read_c0_prid() & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64C) { |
| switch (read_c0_prid() & PRID_REV_MASK) { |
| case PRID_REV_LOONGSON3A_R1: |
| case PRID_REV_LOONGSON3A_R2_0: |
| case PRID_REV_LOONGSON3A_R2_1: |
| case PRID_REV_LOONGSON3A_R3_0: |
| case PRID_REV_LOONGSON3A_R3_1: |
| loongson_fdt_blob = __dtb_loongson3_4core_rs780e_begin; |
| break; |
| case PRID_REV_LOONGSON3B_R1: |
| case PRID_REV_LOONGSON3B_R2: |
| loongson_fdt_blob = __dtb_loongson3_8core_rs780e_begin; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| |
| if (!loongson_fdt_blob) |
| pr_err("Failed to determine built-in Loongson64 dtb\n"); |
| |
| loongson_sysconf.pci_mem_start_addr = eirq_source->pci_mem_start_addr; |
| loongson_sysconf.pci_mem_end_addr = eirq_source->pci_mem_end_addr; |
| loongson_sysconf.pci_io_base = eirq_source->pci_io_start_addr; |
| loongson_sysconf.dma_mask_bits = eirq_source->dma_mask_bits; |
| if (loongson_sysconf.dma_mask_bits < 32 || |
| loongson_sysconf.dma_mask_bits > 64) |
| loongson_sysconf.dma_mask_bits = 32; |
| |
| loongson_sysconf.restart_addr = boot_p->reset_system.ResetWarm; |
| loongson_sysconf.poweroff_addr = boot_p->reset_system.Shutdown; |
| loongson_sysconf.suspend_addr = boot_p->reset_system.DoSuspend; |
| |
| loongson_sysconf.vgabios_addr = boot_p->efi.smbios.vga_bios; |
| pr_debug("Shutdown Addr: %llx, Restart Addr: %llx, VBIOS Addr: %llx\n", |
| loongson_sysconf.poweroff_addr, loongson_sysconf.restart_addr, |
| loongson_sysconf.vgabios_addr); |
| |
| memset(loongson_sysconf.ecname, 0, 32); |
| if (esys->has_ec) |
| memcpy(loongson_sysconf.ecname, esys->ec_name, 32); |
| loongson_sysconf.workarounds |= esys->workarounds; |
| |
| loongson_sysconf.nr_uarts = esys->nr_uarts; |
| if (esys->nr_uarts < 1 || esys->nr_uarts > MAX_UARTS) |
| loongson_sysconf.nr_uarts = 1; |
| memcpy(loongson_sysconf.uarts, esys->uarts, |
| sizeof(struct uart_device) * loongson_sysconf.nr_uarts); |
| |
| loongson_sysconf.nr_sensors = esys->nr_sensors; |
| if (loongson_sysconf.nr_sensors > MAX_SENSORS) |
| loongson_sysconf.nr_sensors = 0; |
| if (loongson_sysconf.nr_sensors) |
| memcpy(loongson_sysconf.sensors, esys->sensors, |
| sizeof(struct sensor_device) * loongson_sysconf.nr_sensors); |
| pr_info("CpuClock = %u\n", cpu_clock_freq); |
| |
| /* Read the ID of PCI host bridge to detect bridge type */ |
| id = readl(HOST_BRIDGE_CONFIG_ADDR); |
| vendor = id & 0xffff; |
| device = (id >> 16) & 0xffff; |
| |
| if (vendor == PCI_VENDOR_ID_LOONGSON && device == 0x7a00) { |
| pr_info("The bridge chip is LS7A\n"); |
| loongson_sysconf.bridgetype = LS7A; |
| loongson_sysconf.early_config = ls7a_early_config; |
| } else { |
| pr_info("The bridge chip is RS780E or SR5690\n"); |
| loongson_sysconf.bridgetype = RS780E; |
| loongson_sysconf.early_config = rs780e_early_config; |
| } |
| } |