blob: f972d78372eaf5fb19cdebdb0a177a58ad7fc39e [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Marvell Berlin SATA PHY driver
*
* Copyright (C) 2014 Marvell Technology Group Ltd.
*
* Antoine Ténart <antoine.tenart@free-electrons.com>
*/
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/phy/phy.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#define HOST_VSA_ADDR 0x0
#define HOST_VSA_DATA 0x4
#define PORT_SCR_CTL 0x2c
#define PORT_VSR_ADDR 0x78
#define PORT_VSR_DATA 0x7c
#define CONTROL_REGISTER 0x0
#define MBUS_SIZE_CONTROL 0x4
#define POWER_DOWN_PHY0 BIT(6)
#define POWER_DOWN_PHY1 BIT(14)
#define MBUS_WRITE_REQUEST_SIZE_128 (BIT(2) << 16)
#define MBUS_READ_REQUEST_SIZE_128 (BIT(2) << 19)
#define BG2_PHY_BASE 0x080
#define BG2Q_PHY_BASE 0x200
/* register 0x01 */
#define REF_FREF_SEL_25 BIT(0)
#define PHY_BERLIN_MODE_SATA (0x0 << 5)
/* register 0x02 */
#define USE_MAX_PLL_RATE BIT(12)
/* register 0x23 */
#define DATA_BIT_WIDTH_10 (0x0 << 10)
#define DATA_BIT_WIDTH_20 (0x1 << 10)
#define DATA_BIT_WIDTH_40 (0x2 << 10)
/* register 0x25 */
#define PHY_GEN_MAX_1_5 (0x0 << 10)
#define PHY_GEN_MAX_3_0 (0x1 << 10)
#define PHY_GEN_MAX_6_0 (0x2 << 10)
struct phy_berlin_desc {
struct phy *phy;
u32 power_bit;
unsigned index;
};
struct phy_berlin_priv {
void __iomem *base;
spinlock_t lock;
struct clk *clk;
struct phy_berlin_desc **phys;
unsigned nphys;
u32 phy_base;
};
static inline void phy_berlin_sata_reg_setbits(void __iomem *ctrl_reg,
u32 phy_base, u32 reg, u32 mask, u32 val)
{
u32 regval;
/* select register */
writel(phy_base + reg, ctrl_reg + PORT_VSR_ADDR);
/* set bits */
regval = readl(ctrl_reg + PORT_VSR_DATA);
regval &= ~mask;
regval |= val;
writel(regval, ctrl_reg + PORT_VSR_DATA);
}
static int phy_berlin_sata_power_on(struct phy *phy)
{
struct phy_berlin_desc *desc = phy_get_drvdata(phy);
struct phy_berlin_priv *priv = dev_get_drvdata(phy->dev.parent);
void __iomem *ctrl_reg = priv->base + 0x60 + (desc->index * 0x80);
u32 regval;
clk_prepare_enable(priv->clk);
spin_lock(&priv->lock);
/* Power on PHY */
writel(CONTROL_REGISTER, priv->base + HOST_VSA_ADDR);
regval = readl(priv->base + HOST_VSA_DATA);
regval &= ~desc->power_bit;
writel(regval, priv->base + HOST_VSA_DATA);
/* Configure MBus */
writel(MBUS_SIZE_CONTROL, priv->base + HOST_VSA_ADDR);
regval = readl(priv->base + HOST_VSA_DATA);
regval |= MBUS_WRITE_REQUEST_SIZE_128 | MBUS_READ_REQUEST_SIZE_128;
writel(regval, priv->base + HOST_VSA_DATA);
/* set PHY mode and ref freq to 25 MHz */
phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x01,
0x00ff,
REF_FREF_SEL_25 | PHY_BERLIN_MODE_SATA);
/* set PHY up to 6 Gbps */
phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x25,
0x0c00, PHY_GEN_MAX_6_0);
/* set 40 bits width */
phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x23,
0x0c00, DATA_BIT_WIDTH_40);
/* use max pll rate */
phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x02,
0x0000, USE_MAX_PLL_RATE);
/* set Gen3 controller speed */
regval = readl(ctrl_reg + PORT_SCR_CTL);
regval &= ~GENMASK(7, 4);
regval |= 0x30;
writel(regval, ctrl_reg + PORT_SCR_CTL);
spin_unlock(&priv->lock);
clk_disable_unprepare(priv->clk);
return 0;
}
static int phy_berlin_sata_power_off(struct phy *phy)
{
struct phy_berlin_desc *desc = phy_get_drvdata(phy);
struct phy_berlin_priv *priv = dev_get_drvdata(phy->dev.parent);
u32 regval;
clk_prepare_enable(priv->clk);
spin_lock(&priv->lock);
/* Power down PHY */
writel(CONTROL_REGISTER, priv->base + HOST_VSA_ADDR);
regval = readl(priv->base + HOST_VSA_DATA);
regval |= desc->power_bit;
writel(regval, priv->base + HOST_VSA_DATA);
spin_unlock(&priv->lock);
clk_disable_unprepare(priv->clk);
return 0;
}
static struct phy *phy_berlin_sata_phy_xlate(struct device *dev,
struct of_phandle_args *args)
{
struct phy_berlin_priv *priv = dev_get_drvdata(dev);
int i;
if (WARN_ON(args->args[0] >= priv->nphys))
return ERR_PTR(-ENODEV);
for (i = 0; i < priv->nphys; i++) {
if (priv->phys[i]->index == args->args[0])
break;
}
if (i == priv->nphys)
return ERR_PTR(-ENODEV);
return priv->phys[i]->phy;
}
static const struct phy_ops phy_berlin_sata_ops = {
.power_on = phy_berlin_sata_power_on,
.power_off = phy_berlin_sata_power_off,
.owner = THIS_MODULE,
};
static u32 phy_berlin_power_down_bits[] = {
POWER_DOWN_PHY0,
POWER_DOWN_PHY1,
};
static int phy_berlin_sata_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *child;
struct phy *phy;
struct phy_provider *phy_provider;
struct phy_berlin_priv *priv;
struct resource *res;
int ret, i = 0;
u32 phy_id;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -EINVAL;
priv->base = devm_ioremap(dev, res->start, resource_size(res));
if (!priv->base)
return -ENOMEM;
priv->clk = devm_clk_get(dev, NULL);
if (IS_ERR(priv->clk))
return PTR_ERR(priv->clk);
priv->nphys = of_get_child_count(dev->of_node);
if (priv->nphys == 0)
return -ENODEV;
priv->phys = devm_kcalloc(dev, priv->nphys, sizeof(*priv->phys),
GFP_KERNEL);
if (!priv->phys)
return -ENOMEM;
if (of_device_is_compatible(dev->of_node, "marvell,berlin2-sata-phy"))
priv->phy_base = BG2_PHY_BASE;
else
priv->phy_base = BG2Q_PHY_BASE;
dev_set_drvdata(dev, priv);
spin_lock_init(&priv->lock);
for_each_available_child_of_node(dev->of_node, child) {
struct phy_berlin_desc *phy_desc;
if (of_property_read_u32(child, "reg", &phy_id)) {
dev_err(dev, "missing reg property in node %pOFn\n",
child);
ret = -EINVAL;
goto put_child;
}
if (phy_id >= ARRAY_SIZE(phy_berlin_power_down_bits)) {
dev_err(dev, "invalid reg in node %pOFn\n", child);
ret = -EINVAL;
goto put_child;
}
phy_desc = devm_kzalloc(dev, sizeof(*phy_desc), GFP_KERNEL);
if (!phy_desc) {
ret = -ENOMEM;
goto put_child;
}
phy = devm_phy_create(dev, NULL, &phy_berlin_sata_ops);
if (IS_ERR(phy)) {
dev_err(dev, "failed to create PHY %d\n", phy_id);
ret = PTR_ERR(phy);
goto put_child;
}
phy_desc->phy = phy;
phy_desc->power_bit = phy_berlin_power_down_bits[phy_id];
phy_desc->index = phy_id;
phy_set_drvdata(phy, phy_desc);
priv->phys[i++] = phy_desc;
/* Make sure the PHY is off */
phy_berlin_sata_power_off(phy);
}
phy_provider =
devm_of_phy_provider_register(dev, phy_berlin_sata_phy_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
put_child:
of_node_put(child);
return ret;
}
static const struct of_device_id phy_berlin_sata_of_match[] = {
{ .compatible = "marvell,berlin2-sata-phy" },
{ .compatible = "marvell,berlin2q-sata-phy" },
{ },
};
MODULE_DEVICE_TABLE(of, phy_berlin_sata_of_match);
static struct platform_driver phy_berlin_sata_driver = {
.probe = phy_berlin_sata_probe,
.driver = {
.name = "phy-berlin-sata",
.of_match_table = phy_berlin_sata_of_match,
},
};
module_platform_driver(phy_berlin_sata_driver);
MODULE_DESCRIPTION("Marvell Berlin SATA PHY driver");
MODULE_AUTHOR("Antoine Ténart <antoine.tenart@free-electrons.com>");
MODULE_LICENSE("GPL v2");