| # SPDX-License-Identifier: GPL-2.0-only |
| config MTD_AR7_PARTS |
| tristate "TI AR7 partitioning parser" |
| help |
| TI AR7 partitioning parser support |
| |
| config MTD_BCM47XX_PARTS |
| tristate "BCM47XX partitioning parser" |
| depends on BCM47XX || ARCH_BCM_5301X |
| help |
| This provides partitions parser for devices based on BCM47xx |
| boards. |
| |
| config MTD_BCM63XX_PARTS |
| bool "BCM63XX CFE partitioning parser" |
| depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST |
| select CRC32 |
| select MTD_PARSER_IMAGETAG |
| help |
| This provides partition parsing for BCM63xx devices with CFE |
| bootloaders. |
| |
| config MTD_CMDLINE_PARTS |
| tristate "Command line partition table parsing" |
| depends on MTD |
| help |
| Allow generic configuration of the MTD partition tables via the kernel |
| command line. Multiple flash resources are supported for hardware where |
| different kinds of flash memory are available. |
| |
| You will still need the parsing functions to be called by the driver |
| for your particular device. It won't happen automatically. The |
| SA1100 map driver (CONFIG_MTD_SA1100) has an option for this, for |
| example. |
| |
| The format for the command line is as follows: |
| |
| mtdparts=<mtddef>[;<mtddef] |
| <mtddef> := <mtd-id>:<partdef>[,<partdef>] |
| <partdef> := <size>[@offset][<name>][ro] |
| <mtd-id> := unique id used in mapping driver/device |
| <size> := standard linux memsize OR "-" to denote all |
| remaining space |
| <name> := (NAME) |
| |
| Due to the way Linux handles the command line, no spaces are |
| allowed in the partition definition, including mtd id's and partition |
| names. |
| |
| Examples: |
| |
| 1 flash resource (mtd-id "sa1100"), with 1 single writable partition: |
| mtdparts=sa1100:- |
| |
| Same flash, but 2 named partitions, the first one being read-only: |
| mtdparts=sa1100:256k(ARMboot)ro,-(root) |
| |
| If unsure, say 'N'. |
| |
| config MTD_OF_PARTS |
| tristate "OpenFirmware (device tree) partitioning parser" |
| default y |
| depends on OF |
| help |
| This provides a open firmware device tree partition parser |
| which derives the partition map from the children of the |
| flash memory node, as described in |
| Documentation/devicetree/bindings/mtd/partition.txt. |
| |
| config MTD_OF_PARTS_BCM4908 |
| bool "BCM4908 partitioning support" |
| depends on MTD_OF_PARTS && (ARCH_BCM4908 || COMPILE_TEST) |
| default ARCH_BCM4908 |
| help |
| This provides partitions parser for BCM4908 family devices |
| that can have multiple "firmware" partitions. It takes care of |
| finding currently used one and backup ones. |
| |
| config MTD_OF_PARTS_LINKSYS_NS |
| bool "Linksys Northstar partitioning support" |
| depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCM4908 || COMPILE_TEST) |
| default ARCH_BCM_5301X |
| help |
| This provides partitions parser for Linksys devices based on Broadcom |
| Northstar architecture. Linksys commonly uses fixed flash layout with |
| two "firmware" partitions. Currently used firmware has to be detected |
| using CFE environment variable. |
| |
| config MTD_PARSER_IMAGETAG |
| tristate "Parser for BCM963XX Image Tag format partitions" |
| depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST |
| select CRC32 |
| help |
| Image Tag is the firmware header used by broadcom on their xDSL line |
| of devices. It is used to describe the offsets and lengths of kernel |
| and rootfs partitions. |
| This driver adds support for parsing a partition with an Image Tag |
| header and creates up to two partitions, kernel and rootfs. |
| |
| config MTD_AFS_PARTS |
| tristate "ARM Firmware Suite partition parsing" |
| depends on (ARM || ARM64) |
| help |
| The ARM Firmware Suite allows the user to divide flash devices into |
| multiple 'images'. Each such image has a header containing its name |
| and offset/size etc. |
| |
| If you need code which can detect and parse these tables, and |
| register MTD 'partitions' corresponding to each image detected, |
| enable this option. |
| |
| You will still need the parsing functions to be called by the driver |
| for your particular device. It won't happen automatically. The |
| 'physmap' map driver (CONFIG_MTD_PHYSMAP) does this, for example. |
| |
| config MTD_PARSER_TRX |
| tristate "Parser for TRX format partitions" |
| depends on MTD && (BCM47XX || ARCH_BCM_5301X || ARCH_MEDIATEK || COMPILE_TEST) |
| help |
| TRX is a firmware format used by Broadcom on their devices. It |
| may contain up to 3/4 partitions (depending on the version). |
| This driver will parse TRX header and report at least two partitions: |
| kernel and rootfs. |
| |
| config MTD_SHARPSL_PARTS |
| tristate "Sharp SL Series NAND flash partition parser" |
| depends on MTD_NAND_SHARPSL || MTD_NAND_TMIO || COMPILE_TEST |
| help |
| This provides the read-only FTL logic necessary to read the partition |
| table from the NAND flash of Sharp SL Series (Zaurus) and the MTD |
| partition parser using this code. |
| |
| config MTD_REDBOOT_PARTS |
| tristate "RedBoot partition table parsing" |
| help |
| RedBoot is a ROM monitor and bootloader which deals with multiple |
| 'images' in flash devices by putting a table one of the erase |
| blocks on the device, similar to a partition table, which gives |
| the offsets, lengths and names of all the images stored in the |
| flash. |
| |
| If you need code which can detect and parse this table, and register |
| MTD 'partitions' corresponding to each image in the table, enable |
| this option. |
| |
| You will still need the parsing functions to be called by the driver |
| for your particular device. It won't happen automatically. The |
| SA1100 map driver (CONFIG_MTD_SA1100) has an option for this, for |
| example. |
| |
| if MTD_REDBOOT_PARTS |
| |
| config MTD_REDBOOT_DIRECTORY_BLOCK |
| int "Location of RedBoot partition table" |
| default "-1" |
| help |
| This option is the Linux counterpart to the |
| CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK RedBoot compile time |
| option. |
| |
| The option specifies which Flash sectors holds the RedBoot |
| partition table. A zero or positive value gives an absolute |
| erase block number. A negative value specifies a number of |
| sectors before the end of the device. |
| |
| For example "2" means block number 2, "-1" means the last |
| block and "-2" means the penultimate block. |
| |
| config MTD_REDBOOT_PARTS_UNALLOCATED |
| bool "Include unallocated flash regions" |
| help |
| If you need to register each unallocated flash region as a MTD |
| 'partition', enable this option. |
| |
| config MTD_REDBOOT_PARTS_READONLY |
| bool "Force read-only for RedBoot system images" |
| help |
| If you need to force read-only for 'RedBoot', 'RedBoot Config' and |
| 'FIS directory' images, enable this option. |
| |
| endif # MTD_REDBOOT_PARTS |
| |
| config MTD_QCOMSMEM_PARTS |
| tristate "Qualcomm SMEM flash partition parser" |
| depends on QCOM_SMEM |
| help |
| This provides support for parsing partitions from Shared Memory (SMEM) |
| for NAND and SPI flash on Qualcomm platforms. |
