| // SPDX-License-Identifier: GPL-2.0 |
| |
| #include <linux/init.h> |
| #include <linux/fs.h> |
| #include <linux/slab.h> |
| #include <linux/rwsem.h> |
| #include <linux/xattr.h> |
| #include <linux/security.h> |
| #include <linux/posix_acl_xattr.h> |
| #include <linux/iversion.h> |
| #include <linux/fsverity.h> |
| #include <linux/sched/mm.h> |
| #include "ctree.h" |
| #include "btrfs_inode.h" |
| #include "transaction.h" |
| #include "disk-io.h" |
| #include "locking.h" |
| |
| /* |
| * Implementation of the interface defined in struct fsverity_operations. |
| * |
| * The main question is how and where to store the verity descriptor and the |
| * Merkle tree. We store both in dedicated btree items in the filesystem tree, |
| * together with the rest of the inode metadata. This means we'll need to do |
| * extra work to encrypt them once encryption is supported in btrfs, but btrfs |
| * has a lot of careful code around i_size and it seems better to make a new key |
| * type than try and adjust all of our expectations for i_size. |
| * |
| * Note that this differs from the implementation in ext4 and f2fs, where |
| * this data is stored as if it were in the file, but past EOF. However, btrfs |
| * does not have a widespread mechanism for caching opaque metadata pages, so we |
| * do pretend that the Merkle tree pages themselves are past EOF for the |
| * purposes of caching them (as opposed to creating a virtual inode). |
| * |
| * fs verity items are stored under two different key types on disk. |
| * The descriptor items: |
| * [ inode objectid, BTRFS_VERITY_DESC_ITEM_KEY, offset ] |
| * |
| * At offset 0, we store a btrfs_verity_descriptor_item which tracks the |
| * size of the descriptor item and some extra data for encryption. |
| * Starting at offset 1, these hold the generic fs verity descriptor. |
| * The latter are opaque to btrfs, we just read and write them as a blob for |
| * the higher level verity code. The most common descriptor size is 256 bytes. |
| * |
| * The merkle tree items: |
| * [ inode objectid, BTRFS_VERITY_MERKLE_ITEM_KEY, offset ] |
| * |
| * These also start at offset 0, and correspond to the merkle tree bytes. |
| * So when fsverity asks for page 0 of the merkle tree, we pull up one page |
| * starting at offset 0 for this key type. These are also opaque to btrfs, |
| * we're blindly storing whatever fsverity sends down. |
| * |
| * Another important consideration is the fact that the Merkle tree data scales |
| * linearly with the size of the file (with 4K pages/blocks and SHA-256, it's |
| * ~1/127th the size) so for large files, writing the tree can be a lengthy |
| * operation. For that reason, we guard the whole enable verity operation |
| * (between begin_enable_verity and end_enable_verity) with an orphan item. |
| * Again, because the data can be pretty large, it's quite possible that we |
| * could run out of space writing it, so we try our best to handle errors by |
| * stopping and rolling back rather than aborting the victim transaction. |
| */ |
| |
| #define MERKLE_START_ALIGN 65536 |
| |
| /* |
| * Compute the logical file offset where we cache the Merkle tree. |
| * |
| * @inode: inode of the verity file |
| * |
| * For the purposes of caching the Merkle tree pages, as required by |
| * fs-verity, it is convenient to do size computations in terms of a file |
| * offset, rather than in terms of page indices. |
| * |
| * Use 64K to be sure it's past the last page in the file, even with 64K pages. |
| * That rounding operation itself can overflow loff_t, so we do it in u64 and |
| * check. |
| * |
| * Returns the file offset on success, negative error code on failure. |
| */ |
| static loff_t merkle_file_pos(const struct inode *inode) |
| { |
| u64 sz = inode->i_size; |
| u64 rounded = round_up(sz, MERKLE_START_ALIGN); |
| |
| if (rounded > inode->i_sb->s_maxbytes) |
| return -EFBIG; |
| |
| return rounded; |
| } |
| |
| /* |
| * Drop all the items for this inode with this key_type. |
| * |
| * @inode: inode to drop items for |
| * @key_type: type of items to drop (BTRFS_VERITY_DESC_ITEM or |
| * BTRFS_VERITY_MERKLE_ITEM) |
| * |
| * Before doing a verity enable we cleanup any existing verity items. |
| * This is also used to clean up if a verity enable failed half way through. |
| * |
| * Returns number of dropped items on success, negative error code on failure. |
| */ |
| static int drop_verity_items(struct btrfs_inode *inode, u8 key_type) |
| { |
| struct btrfs_trans_handle *trans; |
| struct btrfs_root *root = inode->root; |
| struct btrfs_path *path; |
| struct btrfs_key key; |
| int count = 0; |
| int ret; |
| |
| path = btrfs_alloc_path(); |
| if (!path) |
| return -ENOMEM; |
| |
| while (1) { |
| /* 1 for the item being dropped */ |
| trans = btrfs_start_transaction(root, 1); |
| if (IS_ERR(trans)) { |
| ret = PTR_ERR(trans); |
| goto out; |
| } |
| |
| /* |
| * Walk backwards through all the items until we find one that |
| * isn't from our key type or objectid |
| */ |
| key.objectid = btrfs_ino(inode); |
| key.type = key_type; |
| key.offset = (u64)-1; |
| |
| ret = btrfs_search_slot(trans, root, &key, path, -1, 1); |
| if (ret > 0) { |
| ret = 0; |
| /* No more keys of this type, we're done */ |
| if (path->slots[0] == 0) |
| break; |
| path->slots[0]--; |
| } else if (ret < 0) { |
| btrfs_end_transaction(trans); |
| goto out; |
| } |
| |
| btrfs_item_key_to_cpu(path->nodes[0], &key, path->slots[0]); |
| |
| /* No more keys of this type, we're done */ |
| if (key.objectid != btrfs_ino(inode) || key.type != key_type) |
| break; |
| |
| /* |
| * This shouldn't be a performance sensitive function because |
| * it's not used as part of truncate. If it ever becomes |
| * perf sensitive, change this to walk forward and bulk delete |
| * items |
| */ |
| ret = btrfs_del_items(trans, root, path, path->slots[0], 1); |
| if (ret) { |
| btrfs_end_transaction(trans); |
| goto out; |
| } |
| count++; |
| btrfs_release_path(path); |
| btrfs_end_transaction(trans); |
| } |
| ret = count; |
| btrfs_end_transaction(trans); |
| out: |
| btrfs_free_path(path); |
| return ret; |
| } |
| |
| /* |
| * Drop all verity items |
| * |
| * @inode: inode to drop verity items for |
| * |
| * In most contexts where we are dropping verity items, we want to do it for all |
| * the types of verity items, not a particular one. |
| * |
| * Returns: 0 on success, negative error code on failure. |
| */ |
| int btrfs_drop_verity_items(struct btrfs_inode *inode) |
| { |
| int ret; |
| |
| ret = drop_verity_items(inode, BTRFS_VERITY_DESC_ITEM_KEY); |
| if (ret < 0) |
| return ret; |
| ret = drop_verity_items(inode, BTRFS_VERITY_MERKLE_ITEM_KEY); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| /* |
| * Insert and write inode items with a given key type and offset. |
| * |
| * @inode: inode to insert for |
| * @key_type: key type to insert |
| * @offset: item offset to insert at |
| * @src: source data to write |
| * @len: length of source data to write |
| * |
| * Write len bytes from src into items of up to 2K length. |
| * The inserted items will have key (ino, key_type, offset + off) where off is |
| * consecutively increasing from 0 up to the last item ending at offset + len. |
| * |
| * Returns 0 on success and a negative error code on failure. |
| */ |
| static int write_key_bytes(struct btrfs_inode *inode, u8 key_type, u64 offset, |
| const char *src, u64 len) |
| { |
| struct btrfs_trans_handle *trans; |
| struct btrfs_path *path; |
| struct btrfs_root *root = inode->root; |
| struct extent_buffer *leaf; |
| struct btrfs_key key; |
| unsigned long copy_bytes; |
| unsigned long src_offset = 0; |
| void *data; |
| int ret = 0; |
| |
| path = btrfs_alloc_path(); |
| if (!path) |
| return -ENOMEM; |
| |
| while (len > 0) { |
| /* 1 for the new item being inserted */ |
| trans = btrfs_start_transaction(root, 1); |
| if (IS_ERR(trans)) { |
| ret = PTR_ERR(trans); |
| break; |
| } |
| |
| key.objectid = btrfs_ino(inode); |
| key.type = key_type; |
| key.offset = offset; |
| |
| /* |
| * Insert 2K at a time mostly to be friendly for smaller leaf |
| * size filesystems |
| */ |
| copy_bytes = min_t(u64, len, 2048); |
| |
| ret = btrfs_insert_empty_item(trans, root, path, &key, copy_bytes); |
| if (ret) { |
| btrfs_end_transaction(trans); |
| break; |
| } |
| |
| leaf = path->nodes[0]; |
| |
| data = btrfs_item_ptr(leaf, path->slots[0], void); |
| write_extent_buffer(leaf, src + src_offset, |
| (unsigned long)data, copy_bytes); |
| offset += copy_bytes; |
| src_offset += copy_bytes; |
| len -= copy_bytes; |
| |
| btrfs_release_path(path); |
| btrfs_end_transaction(trans); |
| } |
| |
| btrfs_free_path(path); |
| return ret; |
| } |
| |
| /* |
| * Read inode items of the given key type and offset from the btree. |
| * |
| * @inode: inode to read items of |
| * @key_type: key type to read |
| * @offset: item offset to read from |
| * @dest: Buffer to read into. This parameter has slightly tricky |
| * semantics. If it is NULL, the function will not do any copying |
| * and will just return the size of all the items up to len bytes. |
| * If dest_page is passed, then the function will kmap_local the |
| * page and ignore dest, but it must still be non-NULL to avoid the |
| * counting-only behavior. |
| * @len: length in bytes to read |
| * @dest_page: copy into this page instead of the dest buffer |
| * |
| * Helper function to read items from the btree. This returns the number of |
| * bytes read or < 0 for errors. We can return short reads if the items don't |
| * exist on disk or aren't big enough to fill the desired length. Supports |
| * reading into a provided buffer (dest) or into the page cache |
| * |
| * Returns number of bytes read or a negative error code on failure. |
| */ |
| static int read_key_bytes(struct btrfs_inode *inode, u8 key_type, u64 offset, |
| char *dest, u64 len, struct page *dest_page) |
| { |
| struct btrfs_path *path; |
| struct btrfs_root *root = inode->root; |
| struct extent_buffer *leaf; |
| struct btrfs_key key; |
| u64 item_end; |
| u64 copy_end; |
| int copied = 0; |
| u32 copy_offset; |
| unsigned long copy_bytes; |
| unsigned long dest_offset = 0; |
| void *data; |
| char *kaddr = dest; |
| int ret; |
| |
| path = btrfs_alloc_path(); |
| if (!path) |
| return -ENOMEM; |
| |
| if (dest_page) |
| path->reada = READA_FORWARD; |
| |
| key.objectid = btrfs_ino(inode); |
| key.type = key_type; |
| key.offset = offset; |
| |
| ret = btrfs_search_slot(NULL, root, &key, path, 0, 0); |
| if (ret < 0) { |
| goto out; |
| } else if (ret > 0) { |
| ret = 0; |
| if (path->slots[0] == 0) |
| goto out; |
| path->slots[0]--; |
| } |
| |
| while (len > 0) { |
| leaf = path->nodes[0]; |
| btrfs_item_key_to_cpu(leaf, &key, path->slots[0]); |
| |
| if (key.objectid != btrfs_ino(inode) || key.type != key_type) |
| break; |
| |
| item_end = btrfs_item_size_nr(leaf, path->slots[0]) + key.offset; |
| |
| if (copied > 0) { |
| /* |
| * Once we've copied something, we want all of the items |
| * to be sequential |
| */ |
| if (key.offset != offset) |
| break; |
| } else { |
| /* |
| * Our initial offset might be in the middle of an |
| * item. Make sure it all makes sense. |
| */ |
| if (key.offset > offset) |
| break; |
| if (item_end <= offset) |
| break; |
| } |
| |
| /* desc = NULL to just sum all the item lengths */ |
| if (!dest) |
| copy_end = item_end; |
| else |
| copy_end = min(offset + len, item_end); |
| |
| /* Number of bytes in this item we want to copy */ |
| copy_bytes = copy_end - offset; |
| |
| /* Offset from the start of item for copying */ |
| copy_offset = offset - key.offset; |
| |
| if (dest) { |
| if (dest_page) |
| kaddr = kmap_local_page(dest_page); |
| |
| data = btrfs_item_ptr(leaf, path->slots[0], void); |
| read_extent_buffer(leaf, kaddr + dest_offset, |
| (unsigned long)data + copy_offset, |
| copy_bytes); |
| |
| if (dest_page) |
| kunmap_local(kaddr); |
| } |
| |
| offset += copy_bytes; |
| dest_offset += copy_bytes; |
| len -= copy_bytes; |
| copied += copy_bytes; |
| |
| path->slots[0]++; |
| if (path->slots[0] >= btrfs_header_nritems(path->nodes[0])) { |
| /* |
| * We've reached the last slot in this leaf and we need |
| * to go to the next leaf. |
| */ |
| ret = btrfs_next_leaf(root, path); |
| if (ret < 0) { |
| break; |
| } else if (ret > 0) { |
| ret = 0; |
| break; |
| } |
| } |
| } |
| out: |
| btrfs_free_path(path); |
| if (!ret) |
| ret = copied; |
| return ret; |
| } |
| |
| /* |
| * Delete an fsverity orphan |
| * |
| * @trans: transaction to do the delete in |
| * @inode: inode to orphan |
| * |
| * Capture verity orphan specific logic that is repeated in the couple places |
| * we delete verity orphans. Specifically, handling ENOENT and ignoring inodes |
| * with 0 links. |
| * |
| * Returns zero on success or a negative error code on failure. |
| */ |
| static int del_orphan(struct btrfs_trans_handle *trans, struct btrfs_inode *inode) |
| { |
| struct btrfs_root *root = inode->root; |
| int ret; |
| |
| /* |
| * If the inode has no links, it is either already unlinked, or was |
| * created with O_TMPFILE. In either case, it should have an orphan from |
| * that other operation. Rather than reference count the orphans, we |
| * simply ignore them here, because we only invoke the verity path in |
| * the orphan logic when i_nlink is 1. |
| */ |
| if (!inode->vfs_inode.i_nlink) |
| return 0; |
| |
| ret = btrfs_del_orphan_item(trans, root, btrfs_ino(inode)); |
| if (ret == -ENOENT) |
| ret = 0; |
| return ret; |
| } |
| |
| /* |
| * Rollback in-progress verity if we encounter an error. |
| * |
| * @inode: inode verity had an error for |
| * |
| * We try to handle recoverable errors while enabling verity by rolling it back |
| * and just failing the operation, rather than having an fs level error no |
| * matter what. However, any error in rollback is unrecoverable. |
| * |
| * Returns 0 on success, negative error code on failure. |
| */ |
| static int rollback_verity(struct btrfs_inode *inode) |
| { |
| struct btrfs_trans_handle *trans = NULL; |
| struct btrfs_root *root = inode->root; |
| int ret; |
| |
| ASSERT(inode_is_locked(&inode->vfs_inode)); |
| truncate_inode_pages(inode->vfs_inode.i_mapping, inode->vfs_inode.i_size); |
| clear_bit(BTRFS_INODE_VERITY_IN_PROGRESS, &inode->runtime_flags); |
| ret = btrfs_drop_verity_items(inode); |
| if (ret) { |
| btrfs_handle_fs_error(root->fs_info, ret, |
| "failed to drop verity items in rollback %llu", |
| (u64)inode->vfs_inode.i_ino); |
| goto out; |
| } |
| |
| /* |
| * 1 for updating the inode flag |
| * 1 for deleting the orphan |
| */ |
| trans = btrfs_start_transaction(root, 2); |
| if (IS_ERR(trans)) { |
| ret = PTR_ERR(trans); |
| trans = NULL; |
| btrfs_handle_fs_error(root->fs_info, ret, |
| "failed to start transaction in verity rollback %llu", |
| (u64)inode->vfs_inode.i_ino); |
| goto out; |
| } |
| inode->ro_flags &= ~BTRFS_INODE_RO_VERITY; |
| btrfs_sync_inode_flags_to_i_flags(&inode->vfs_inode); |
| ret = btrfs_update_inode(trans, root, inode); |
| if (ret) { |
| btrfs_abort_transaction(trans, ret); |
| goto out; |
| } |
| ret = del_orphan(trans, inode); |
| if (ret) { |
| btrfs_abort_transaction(trans, ret); |
| goto out; |
| } |
| out: |
| if (trans) |
| btrfs_end_transaction(trans); |
| return ret; |
| } |
| |
| /* |
| * Finalize making the file a valid verity file |
| * |
| * @inode: inode to be marked as verity |
| * @desc: contents of the verity descriptor to write (not NULL) |
| * @desc_size: size of the verity descriptor |
| * |
| * Do the actual work of finalizing verity after successfully writing the Merkle |
| * tree: |
| * |
| * - write out the descriptor items |
| * - mark the inode with the verity flag |
| * - delete the orphan item |
| * - mark the ro compat bit |
| * - clear the in progress bit |
| * |
| * Returns 0 on success, negative error code on failure. |
| */ |
| static int finish_verity(struct btrfs_inode *inode, const void *desc, |
| size_t desc_size) |
| { |
| struct btrfs_trans_handle *trans = NULL; |
| struct btrfs_root *root = inode->root; |
| struct btrfs_verity_descriptor_item item; |
| int ret; |
| |
| /* Write out the descriptor item */ |
| memset(&item, 0, sizeof(item)); |
| btrfs_set_stack_verity_descriptor_size(&item, desc_size); |
| ret = write_key_bytes(inode, BTRFS_VERITY_DESC_ITEM_KEY, 0, |
| (const char *)&item, sizeof(item)); |
| if (ret) |
| goto out; |
| |
| /* Write out the descriptor itself */ |
| ret = write_key_bytes(inode, BTRFS_VERITY_DESC_ITEM_KEY, 1, |
| desc, desc_size); |
| if (ret) |
| goto out; |
| |
| /* |
| * 1 for updating the inode flag |
| * 1 for deleting the orphan |
| */ |
| trans = btrfs_start_transaction(root, 2); |
| if (IS_ERR(trans)) { |
| ret = PTR_ERR(trans); |
| goto out; |
| } |
| inode->ro_flags |= BTRFS_INODE_RO_VERITY; |
| btrfs_sync_inode_flags_to_i_flags(&inode->vfs_inode); |
| ret = btrfs_update_inode(trans, root, inode); |
| if (ret) |
| goto end_trans; |
| ret = del_orphan(trans, inode); |
| if (ret) |
| goto end_trans; |
| clear_bit(BTRFS_INODE_VERITY_IN_PROGRESS, &inode->runtime_flags); |
| btrfs_set_fs_compat_ro(root->fs_info, VERITY); |
| end_trans: |
| btrfs_end_transaction(trans); |
| out: |
| return ret; |
| |
| } |
| |
| /* |
| * fsverity op that begins enabling verity. |
| * |
| * @filp: file to enable verity on |
| * |
| * Begin enabling fsverity for the file. We drop any existing verity items, add |
| * an orphan and set the in progress bit. |
| * |
| * Returns 0 on success, negative error code on failure. |
| */ |
| static int btrfs_begin_enable_verity(struct file *filp) |
| { |
| struct btrfs_inode *inode = BTRFS_I(file_inode(filp)); |
| struct btrfs_root *root = inode->root; |
| struct btrfs_trans_handle *trans; |
| int ret; |
| |
| ASSERT(inode_is_locked(file_inode(filp))); |
| |
| if (test_bit(BTRFS_INODE_VERITY_IN_PROGRESS, &inode->runtime_flags)) |
| return -EBUSY; |
| |
| /* |
| * This should almost never do anything, but theoretically, it's |
| * possible that we failed to enable verity on a file, then were |
| * interrupted or failed while rolling back, failed to cleanup the |
| * orphan, and finally attempt to enable verity again. |
| */ |
| ret = btrfs_drop_verity_items(inode); |
| if (ret) |
| return ret; |
| |
| /* 1 for the orphan item */ |
| trans = btrfs_start_transaction(root, 1); |
| if (IS_ERR(trans)) |
| return PTR_ERR(trans); |
| |
| ret = btrfs_orphan_add(trans, inode); |
| if (!ret) |
| set_bit(BTRFS_INODE_VERITY_IN_PROGRESS, &inode->runtime_flags); |
| btrfs_end_transaction(trans); |
| |
| return 0; |
| } |
| |
| /* |
| * fsverity op that ends enabling verity. |
| * |
| * @filp: file we are finishing enabling verity on |
| * @desc: verity descriptor to write out (NULL in error conditions) |
| * @desc_size: size of the verity descriptor (variable with signatures) |
| * @merkle_tree_size: size of the merkle tree in bytes |
| * |
| * If desc is null, then VFS is signaling an error occurred during verity |
| * enable, and we should try to rollback. Otherwise, attempt to finish verity. |
| * |
| * Returns 0 on success, negative error code on error. |
| */ |
| static int btrfs_end_enable_verity(struct file *filp, const void *desc, |
| size_t desc_size, u64 merkle_tree_size) |
| { |
| struct btrfs_inode *inode = BTRFS_I(file_inode(filp)); |
| int ret = 0; |
| int rollback_ret; |
| |
| ASSERT(inode_is_locked(file_inode(filp))); |
| |
| if (desc == NULL) |
| goto rollback; |
| |
| ret = finish_verity(inode, desc, desc_size); |
| if (ret) |
| goto rollback; |
| return ret; |
| |
| rollback: |
| rollback_ret = rollback_verity(inode); |
| if (rollback_ret) |
| btrfs_err(inode->root->fs_info, |
| "failed to rollback verity items: %d", rollback_ret); |
| return ret; |
| } |
| |
| /* |
| * fsverity op that gets the struct fsverity_descriptor. |
| * |
| * @inode: inode to get the descriptor of |
| * @buf: output buffer for the descriptor contents |
| * @buf_size: size of the output buffer. 0 to query the size |
| * |
| * fsverity does a two pass setup for reading the descriptor, in the first pass |
| * it calls with buf_size = 0 to query the size of the descriptor, and then in |
| * the second pass it actually reads the descriptor off disk. |
| * |
| * Returns the size on success or a negative error code on failure. |
| */ |
| static int btrfs_get_verity_descriptor(struct inode *inode, void *buf, |
| size_t buf_size) |
| { |
| u64 true_size; |
| int ret = 0; |
| struct btrfs_verity_descriptor_item item; |
| |
| memset(&item, 0, sizeof(item)); |
| ret = read_key_bytes(BTRFS_I(inode), BTRFS_VERITY_DESC_ITEM_KEY, 0, |
| (char *)&item, sizeof(item), NULL); |
| if (ret < 0) |
| return ret; |
| |
| if (item.reserved[0] != 0 || item.reserved[1] != 0) |
| return -EUCLEAN; |
| |
| true_size = btrfs_stack_verity_descriptor_size(&item); |
| if (true_size > INT_MAX) |
| return -EUCLEAN; |
| |
| if (buf_size == 0) |
| return true_size; |
| if (buf_size < true_size) |
| return -ERANGE; |
| |
| ret = read_key_bytes(BTRFS_I(inode), BTRFS_VERITY_DESC_ITEM_KEY, 1, |
| buf, buf_size, NULL); |
| if (ret < 0) |
| return ret; |
| if (ret != true_size) |
| return -EIO; |
| |
| return true_size; |
| } |
| |
| /* |
| * fsverity op that reads and caches a merkle tree page. |
| * |
| * @inode: inode to read a merkle tree page for |
| * @index: page index relative to the start of the merkle tree |
| * @num_ra_pages: number of pages to readahead. Optional, we ignore it |
| * |
| * The Merkle tree is stored in the filesystem btree, but its pages are cached |
| * with a logical position past EOF in the inode's mapping. |
| * |
| * Returns the page we read, or an ERR_PTR on error. |
| */ |
| static struct page *btrfs_read_merkle_tree_page(struct inode *inode, |
| pgoff_t index, |
| unsigned long num_ra_pages) |
| { |
| struct page *page; |
| u64 off = (u64)index << PAGE_SHIFT; |
| loff_t merkle_pos = merkle_file_pos(inode); |
| int ret; |
| |
| if (merkle_pos < 0) |
| return ERR_PTR(merkle_pos); |
| if (merkle_pos > inode->i_sb->s_maxbytes - off - PAGE_SIZE) |
| return ERR_PTR(-EFBIG); |
| index += merkle_pos >> PAGE_SHIFT; |
| again: |
| page = find_get_page_flags(inode->i_mapping, index, FGP_ACCESSED); |
| if (page) { |
| if (PageUptodate(page)) |
| return page; |
| |
| lock_page(page); |
| /* |
| * We only insert uptodate pages, so !Uptodate has to be |
| * an error |
| */ |
| if (!PageUptodate(page)) { |
| unlock_page(page); |
| put_page(page); |
| return ERR_PTR(-EIO); |
| } |
| unlock_page(page); |
| return page; |
| } |
| |
| page = __page_cache_alloc(mapping_gfp_constraint(inode->i_mapping, ~__GFP_FS)); |
| if (!page) |
| return ERR_PTR(-ENOMEM); |
| |
| /* |
| * Merkle item keys are indexed from byte 0 in the merkle tree. |
| * They have the form: |
| * |
| * [ inode objectid, BTRFS_MERKLE_ITEM_KEY, offset in bytes ] |
| */ |
| ret = read_key_bytes(BTRFS_I(inode), BTRFS_VERITY_MERKLE_ITEM_KEY, off, |
| page_address(page), PAGE_SIZE, page); |
| if (ret < 0) { |
| put_page(page); |
| return ERR_PTR(ret); |
| } |
| if (ret < PAGE_SIZE) |
| memzero_page(page, ret, PAGE_SIZE - ret); |
| |
| SetPageUptodate(page); |
| ret = add_to_page_cache_lru(page, inode->i_mapping, index, GFP_NOFS); |
| |
| if (!ret) { |
| /* Inserted and ready for fsverity */ |
| unlock_page(page); |
| } else { |
| put_page(page); |
| /* Did someone race us into inserting this page? */ |
| if (ret == -EEXIST) |
| goto again; |
| page = ERR_PTR(ret); |
| } |
| return page; |
| } |
| |
| /* |
| * fsverity op that writes a Merkle tree block into the btree. |
| * |
| * @inode: inode to write a Merkle tree block for |
| * @buf: Merkle tree data block to write |
| * @index: index of the block in the Merkle tree |
| * @log_blocksize: log base 2 of the Merkle tree block size |
| * |
| * Note that the block size could be different from the page size, so it is not |
| * safe to assume that index is a page index. |
| * |
| * Returns 0 on success or negative error code on failure |
| */ |
| static int btrfs_write_merkle_tree_block(struct inode *inode, const void *buf, |
| u64 index, int log_blocksize) |
| { |
| u64 off = index << log_blocksize; |
| u64 len = 1ULL << log_blocksize; |
| loff_t merkle_pos = merkle_file_pos(inode); |
| |
| if (merkle_pos < 0) |
| return merkle_pos; |
| if (merkle_pos > inode->i_sb->s_maxbytes - off - len) |
| return -EFBIG; |
| |
| return write_key_bytes(BTRFS_I(inode), BTRFS_VERITY_MERKLE_ITEM_KEY, |
| off, buf, len); |
| } |
| |
| const struct fsverity_operations btrfs_verityops = { |
| .begin_enable_verity = btrfs_begin_enable_verity, |
| .end_enable_verity = btrfs_end_enable_verity, |
| .get_verity_descriptor = btrfs_get_verity_descriptor, |
| .read_merkle_tree_page = btrfs_read_merkle_tree_page, |
| .write_merkle_tree_block = btrfs_write_merkle_tree_block, |
| }; |