| .. SPDX-License-Identifier: GPL-2.0 |
| .. include:: <isonum.txt> |
| |
| =============================================== |
| ``amd-pstate`` CPU Performance Scaling Driver |
| =============================================== |
| |
| :Copyright: |copy| 2021 Advanced Micro Devices, Inc. |
| |
| :Author: Huang Rui <ray.huang@amd.com> |
| |
| |
| Introduction |
| =================== |
| |
| ``amd-pstate`` is the AMD CPU performance scaling driver that introduces a |
| new CPU frequency control mechanism on modern AMD APU and CPU series in |
| Linux kernel. The new mechanism is based on Collaborative Processor |
| Performance Control (CPPC) which provides finer grain frequency management |
| than legacy ACPI hardware P-States. Current AMD CPU/APU platforms are using |
| the ACPI P-states driver to manage CPU frequency and clocks with switching |
| only in 3 P-states. CPPC replaces the ACPI P-states controls and allows a |
| flexible, low-latency interface for the Linux kernel to directly |
| communicate the performance hints to hardware. |
| |
| ``amd-pstate`` leverages the Linux kernel governors such as ``schedutil``, |
| ``ondemand``, etc. to manage the performance hints which are provided by |
| CPPC hardware functionality that internally follows the hardware |
| specification (for details refer to AMD64 Architecture Programmer's Manual |
| Volume 2: System Programming [1]_). Currently, ``amd-pstate`` supports basic |
| frequency control function according to kernel governors on some of the |
| Zen2 and Zen3 processors, and we will implement more AMD specific functions |
| in future after we verify them on the hardware and SBIOS. |
| |
| |
| AMD CPPC Overview |
| ======================= |
| |
| Collaborative Processor Performance Control (CPPC) interface enumerates a |
| continuous, abstract, and unit-less performance value in a scale that is |
| not tied to a specific performance state / frequency. This is an ACPI |
| standard [2]_ which software can specify application performance goals and |
| hints as a relative target to the infrastructure limits. AMD processors |
| provide the low latency register model (MSR) instead of an AML code |
| interpreter for performance adjustments. ``amd-pstate`` will initialize a |
| ``struct cpufreq_driver`` instance, ``amd_pstate_driver``, with the callbacks |
| to manage each performance update behavior. :: |
| |
| Highest Perf ------>+-----------------------+ +-----------------------+ |
| | | | | |
| | | | | |
| | | Max Perf ---->| | |
| | | | | |
| | | | | |
| Nominal Perf ------>+-----------------------+ +-----------------------+ |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | Desired Perf ---->| | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| Lowest non- | | | | |
| linear perf ------>+-----------------------+ +-----------------------+ |
| | | | | |
| | | Lowest perf ---->| | |
| | | | | |
| Lowest perf ------>+-----------------------+ +-----------------------+ |
| | | | | |
| | | | | |
| | | | | |
| 0 ------>+-----------------------+ +-----------------------+ |
| |
| AMD P-States Performance Scale |
| |
| |
| .. _perf_cap: |
| |
| AMD CPPC Performance Capability |
| -------------------------------- |
| |
| Highest Performance (RO) |
| ......................... |
| |
| This is the absolute maximum performance an individual processor may reach, |
| assuming ideal conditions. This performance level may not be sustainable |
| for long durations and may only be achievable if other platform components |
| are in a specific state; for example, it may require other processors to be in |
| an idle state. This would be equivalent to the highest frequencies |
| supported by the processor. |
| |
| Nominal (Guaranteed) Performance (RO) |
| ...................................... |
| |
| This is the maximum sustained performance level of the processor, assuming |
| ideal operating conditions. In the absence of an external constraint (power, |
| thermal, etc.), this is the performance level the processor is expected to |
| be able to maintain continuously. All cores/processors are expected to be |
| able to sustain their nominal performance state simultaneously. |
| |
| Lowest non-linear Performance (RO) |
| ................................... |
| |
| This is the lowest performance level at which nonlinear power savings are |
| achieved, for example, due to the combined effects of voltage and frequency |
| scaling. Above this threshold, lower performance levels should be generally |
| more energy efficient than higher performance levels. This register |
| effectively conveys the most efficient performance level to ``amd-pstate``. |
| |
| Lowest Performance (RO) |
| ........................ |
| |
| This is the absolute lowest performance level of the processor. Selecting a |
| performance level lower than the lowest nonlinear performance level may |
| cause an efficiency penalty but should reduce the instantaneous power |
| consumption of the processor. |
| |
| AMD CPPC Performance Control |
| ------------------------------ |
| |
| ``amd-pstate`` passes performance goals through these registers. The |
| register drives the behavior of the desired performance target. |
| |
| Minimum requested performance (RW) |
| ................................... |
| |
| ``amd-pstate`` specifies the minimum allowed performance level. |
| |
| Maximum requested performance (RW) |
| ................................... |
| |
| ``amd-pstate`` specifies a limit the maximum performance that is expected |
| to be supplied by the hardware. |
| |
| Desired performance target (RW) |
| ................................... |
| |
| ``amd-pstate`` specifies a desired target in the CPPC performance scale as |
| a relative number. This can be expressed as percentage of nominal |
| performance (infrastructure max). Below the nominal sustained performance |
| level, desired performance expresses the average performance level of the |
| processor subject to hardware. Above the nominal performance level, |
| the processor must provide at least nominal performance requested and go higher |
| if current operating conditions allow. |
| |
| Energy Performance Preference (EPP) (RW) |
| ......................................... |
| |
| This attribute provides a hint to the hardware if software wants to bias |
| toward performance (0x0) or energy efficiency (0xff). |
| |
| |
| Key Governors Support |
| ======================= |
| |
| ``amd-pstate`` can be used with all the (generic) scaling governors listed |
| by the ``scaling_available_governors`` policy attribute in ``sysfs``. Then, |
| it is responsible for the configuration of policy objects corresponding to |
| CPUs and provides the ``CPUFreq`` core (and the scaling governors attached |
| to the policy objects) with accurate information on the maximum and minimum |
| operating frequencies supported by the hardware. Users can check the |
| ``scaling_cur_freq`` information comes from the ``CPUFreq`` core. |
| |
| ``amd-pstate`` mainly supports ``schedutil`` and ``ondemand`` for dynamic |
| frequency control. It is to fine tune the processor configuration on |
| ``amd-pstate`` to the ``schedutil`` with CPU CFS scheduler. ``amd-pstate`` |
| registers the adjust_perf callback to implement performance update behavior |
| similar to CPPC. It is initialized by ``sugov_start`` and then populates the |
| CPU's update_util_data pointer to assign ``sugov_update_single_perf`` as the |
| utilization update callback function in the CPU scheduler. The CPU scheduler |
| will call ``cpufreq_update_util`` and assigns the target performance according |
| to the ``struct sugov_cpu`` that the utilization update belongs to. |
| Then, ``amd-pstate`` updates the desired performance according to the CPU |
| scheduler assigned. |
| |
| .. _processor_support: |
| |
| Processor Support |
| ======================= |
| |
| The ``amd-pstate`` initialization will fail if the ``_CPC`` entry in the ACPI |
| SBIOS does not exist in the detected processor. It uses ``acpi_cpc_valid`` |
| to check the existence of ``_CPC``. All Zen based processors support the legacy |
| ACPI hardware P-States function, so when ``amd-pstate`` fails initialization, |
| the kernel will fall back to initialize the ``acpi-cpufreq`` driver. |
| |
| There are two types of hardware implementations for ``amd-pstate``: one is |
| `Full MSR Support <perf_cap_>`_ and another is `Shared Memory Support |
| <perf_cap_>`_. It can use the :c:macro:`X86_FEATURE_CPPC` feature flag to |
| indicate the different types. (For details, refer to the Processor Programming |
| Reference (PPR) for AMD Family 19h Model 51h, Revision A1 Processors [3]_.) |
| ``amd-pstate`` is to register different ``static_call`` instances for different |
| hardware implementations. |
| |
| Currently, some of the Zen2 and Zen3 processors support ``amd-pstate``. In the |
| future, it will be supported on more and more AMD processors. |
| |
| Full MSR Support |
| ----------------- |
| |
| Some new Zen3 processors such as Cezanne provide the MSR registers directly |
| while the :c:macro:`X86_FEATURE_CPPC` CPU feature flag is set. |
| ``amd-pstate`` can handle the MSR register to implement the fast switch |
| function in ``CPUFreq`` that can reduce the latency of frequency control in |
| interrupt context. The functions with a ``pstate_xxx`` prefix represent the |
| operations on MSR registers. |
| |
| Shared Memory Support |
| ---------------------- |
| |
| If the :c:macro:`X86_FEATURE_CPPC` CPU feature flag is not set, the |
| processor supports the shared memory solution. In this case, ``amd-pstate`` |
| uses the ``cppc_acpi`` helper methods to implement the callback functions |
| that are defined on ``static_call``. The functions with the ``cppc_xxx`` prefix |
| represent the operations of ACPI CPPC helpers for the shared memory solution. |
| |
| |
| AMD P-States and ACPI hardware P-States always can be supported in one |
| processor. But AMD P-States has the higher priority and if it is enabled |
| with :c:macro:`MSR_AMD_CPPC_ENABLE` or ``cppc_set_enable``, it will respond |
| to the request from AMD P-States. |
| |
| |
| User Space Interface in ``sysfs`` - Per-policy control |
| ====================================================== |
| |
| ``amd-pstate`` exposes several global attributes (files) in ``sysfs`` to |
| control its functionality at the system level. They are located in the |
| ``/sys/devices/system/cpu/cpufreq/policyX/`` directory and affect all CPUs. :: |
| |
| root@hr-test1:/home/ray# ls /sys/devices/system/cpu/cpufreq/policy0/*amd* |
| /sys/devices/system/cpu/cpufreq/policy0/amd_pstate_highest_perf |
| /sys/devices/system/cpu/cpufreq/policy0/amd_pstate_lowest_nonlinear_freq |
| /sys/devices/system/cpu/cpufreq/policy0/amd_pstate_max_freq |
| |
| |
| ``amd_pstate_highest_perf / amd_pstate_max_freq`` |
| |
| Maximum CPPC performance and CPU frequency that the driver is allowed to |
| set, in percent of the maximum supported CPPC performance level (the highest |
| performance supported in `AMD CPPC Performance Capability <perf_cap_>`_). |
| In some ASICs, the highest CPPC performance is not the one in the ``_CPC`` |
| table, so we need to expose it to sysfs. If boost is not active, but |
| still supported, this maximum frequency will be larger than the one in |
| ``cpuinfo``. |
| This attribute is read-only. |
| |
| ``amd_pstate_lowest_nonlinear_freq`` |
| |
| The lowest non-linear CPPC CPU frequency that the driver is allowed to set, |
| in percent of the maximum supported CPPC performance level. (Please see the |
| lowest non-linear performance in `AMD CPPC Performance Capability |
| <perf_cap_>`_.) |
| This attribute is read-only. |
| |
| ``energy_performance_available_preferences`` |
| |
| A list of all the supported EPP preferences that could be used for |
| ``energy_performance_preference`` on this system. |
| These profiles represent different hints that are provided |
| to the low-level firmware about the user's desired energy vs efficiency |
| tradeoff. ``default`` represents the epp value is set by platform |
| firmware. This attribute is read-only. |
| |
| ``energy_performance_preference`` |
| |
| The current energy performance preference can be read from this attribute. |
| and user can change current preference according to energy or performance needs |
| Please get all support profiles list from |
| ``energy_performance_available_preferences`` attribute, all the profiles are |
| integer values defined between 0 to 255 when EPP feature is enabled by platform |
| firmware, if EPP feature is disabled, driver will ignore the written value |
| This attribute is read-write. |
| |
| Other performance and frequency values can be read back from |
| ``/sys/devices/system/cpu/cpuX/acpi_cppc/``, see :ref:`cppc_sysfs`. |
| |
| |
| ``amd-pstate`` vs ``acpi-cpufreq`` |
| ====================================== |
| |
| On the majority of AMD platforms supported by ``acpi-cpufreq``, the ACPI tables |
| provided by the platform firmware are used for CPU performance scaling, but |
| only provide 3 P-states on AMD processors. |
| However, on modern AMD APU and CPU series, hardware provides the Collaborative |
| Processor Performance Control according to the ACPI protocol and customizes this |
| for AMD platforms. That is, fine-grained and continuous frequency ranges |
| instead of the legacy hardware P-states. ``amd-pstate`` is the kernel |
| module which supports the new AMD P-States mechanism on most of the future AMD |
| platforms. The AMD P-States mechanism is the more performance and energy |
| efficiency frequency management method on AMD processors. |
| |
| |
| AMD Pstate Driver Operation Modes |
| ================================= |
| |
| ``amd_pstate`` CPPC has 3 operation modes: autonomous (active) mode, |
| non-autonomous (passive) mode and guided autonomous (guided) mode. |
| Active/passive/guided mode can be chosen by different kernel parameters. |
| |
| - In autonomous mode, platform ignores the desired performance level request |
| and takes into account only the values set to the minimum, maximum and energy |
| performance preference registers. |
| - In non-autonomous mode, platform gets desired performance level |
| from OS directly through Desired Performance Register. |
| - In guided-autonomous mode, platform sets operating performance level |
| autonomously according to the current workload and within the limits set by |
| OS through min and max performance registers. |
| |
| Active Mode |
| ------------ |
| |
| ``amd_pstate=active`` |
| |
| This is the low-level firmware control mode which is implemented by ``amd_pstate_epp`` |
| driver with ``amd_pstate=active`` passed to the kernel in the command line. |
| In this mode, ``amd_pstate_epp`` driver provides a hint to the hardware if software |
| wants to bias toward performance (0x0) or energy efficiency (0xff) to the CPPC firmware. |
| then CPPC power algorithm will calculate the runtime workload and adjust the realtime |
| cores frequency according to the power supply and thermal, core voltage and some other |
| hardware conditions. |
| |
| Passive Mode |
| ------------ |
| |
| ``amd_pstate=passive`` |
| |
| It will be enabled if the ``amd_pstate=passive`` is passed to the kernel in the command line. |
| In this mode, ``amd_pstate`` driver software specifies a desired QoS target in the CPPC |
| performance scale as a relative number. This can be expressed as percentage of nominal |
| performance (infrastructure max). Below the nominal sustained performance level, |
| desired performance expresses the average performance level of the processor subject |
| to the Performance Reduction Tolerance register. Above the nominal performance level, |
| processor must provide at least nominal performance requested and go higher if current |
| operating conditions allow. |
| |
| Guided Mode |
| ----------- |
| |
| ``amd_pstate=guided`` |
| |
| If ``amd_pstate=guided`` is passed to kernel command line option then this mode |
| is activated. In this mode, driver requests minimum and maximum performance |
| level and the platform autonomously selects a performance level in this range |
| and appropriate to the current workload. |
| |
| User Space Interface in ``sysfs`` - General |
| =========================================== |
| |
| Global Attributes |
| ----------------- |
| |
| ``amd-pstate`` exposes several global attributes (files) in ``sysfs`` to |
| control its functionality at the system level. They are located in the |
| ``/sys/devices/system/cpu/amd_pstate/`` directory and affect all CPUs. |
| |
| ``status`` |
| Operation mode of the driver: "active", "passive" or "disable". |
| |
| "active" |
| The driver is functional and in the ``active mode`` |
| |
| "passive" |
| The driver is functional and in the ``passive mode`` |
| |
| "guided" |
| The driver is functional and in the ``guided mode`` |
| |
| "disable" |
| The driver is unregistered and not functional now. |
| |
| This attribute can be written to in order to change the driver's |
| operation mode or to unregister it. The string written to it must be |
| one of the possible values of it and, if successful, writing one of |
| these values to the sysfs file will cause the driver to switch over |
| to the operation mode represented by that string - or to be |
| unregistered in the "disable" case. |
| |
| ``cpupower`` tool support for ``amd-pstate`` |
| =============================================== |
| |
| ``amd-pstate`` is supported by the ``cpupower`` tool, which can be used to dump |
| frequency information. Development is in progress to support more and more |
| operations for the new ``amd-pstate`` module with this tool. :: |
| |
| root@hr-test1:/home/ray# cpupower frequency-info |
| analyzing CPU 0: |
| driver: amd-pstate |
| CPUs which run at the same hardware frequency: 0 |
| CPUs which need to have their frequency coordinated by software: 0 |
| maximum transition latency: 131 us |
| hardware limits: 400 MHz - 4.68 GHz |
| available cpufreq governors: ondemand conservative powersave userspace performance schedutil |
| current policy: frequency should be within 400 MHz and 4.68 GHz. |
| The governor "schedutil" may decide which speed to use |
| within this range. |
| current CPU frequency: Unable to call hardware |
| current CPU frequency: 4.02 GHz (asserted by call to kernel) |
| boost state support: |
| Supported: yes |
| Active: yes |
| AMD PSTATE Highest Performance: 166. Maximum Frequency: 4.68 GHz. |
| AMD PSTATE Nominal Performance: 117. Nominal Frequency: 3.30 GHz. |
| AMD PSTATE Lowest Non-linear Performance: 39. Lowest Non-linear Frequency: 1.10 GHz. |
| AMD PSTATE Lowest Performance: 15. Lowest Frequency: 400 MHz. |
| |
| |
| Diagnostics and Tuning |
| ======================= |
| |
| Trace Events |
| -------------- |
| |
| There are two static trace events that can be used for ``amd-pstate`` |
| diagnostics. One of them is the ``cpu_frequency`` trace event generally used |
| by ``CPUFreq``, and the other one is the ``amd_pstate_perf`` trace event |
| specific to ``amd-pstate``. The following sequence of shell commands can |
| be used to enable them and see their output (if the kernel is |
| configured to support event tracing). :: |
| |
| root@hr-test1:/home/ray# cd /sys/kernel/tracing/ |
| root@hr-test1:/sys/kernel/tracing# echo 1 > events/amd_cpu/enable |
| root@hr-test1:/sys/kernel/tracing# cat trace |
| # tracer: nop |
| # |
| # entries-in-buffer/entries-written: 47827/42233061 #P:2 |
| # |
| # _-----=> irqs-off |
| # / _----=> need-resched |
| # | / _---=> hardirq/softirq |
| # || / _--=> preempt-depth |
| # ||| / delay |
| # TASK-PID CPU# |||| TIMESTAMP FUNCTION |
| # | | | |||| | | |
| <idle>-0 [015] dN... 4995.979886: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=15 changed=false fast_switch=true |
| <idle>-0 [007] d.h.. 4995.979893: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=7 changed=false fast_switch=true |
| cat-2161 [000] d.... 4995.980841: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=0 changed=false fast_switch=true |
| sshd-2125 [004] d.s.. 4995.980968: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=4 changed=false fast_switch=true |
| <idle>-0 [007] d.s.. 4995.980968: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=7 changed=false fast_switch=true |
| <idle>-0 [003] d.s.. 4995.980971: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=3 changed=false fast_switch=true |
| <idle>-0 [011] d.s.. 4995.980996: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=11 changed=false fast_switch=true |
| |
| The ``cpu_frequency`` trace event will be triggered either by the ``schedutil`` scaling |
| governor (for the policies it is attached to), or by the ``CPUFreq`` core (for the |
| policies with other scaling governors). |
| |
| |
| Tracer Tool |
| ------------- |
| |
| ``amd_pstate_tracer.py`` can record and parse ``amd-pstate`` trace log, then |
| generate performance plots. This utility can be used to debug and tune the |
| performance of ``amd-pstate`` driver. The tracer tool needs to import intel |
| pstate tracer. |
| |
| Tracer tool located in ``linux/tools/power/x86/amd_pstate_tracer``. It can be |
| used in two ways. If trace file is available, then directly parse the file |
| with command :: |
| |
| ./amd_pstate_trace.py [-c cpus] -t <trace_file> -n <test_name> |
| |
| Or generate trace file with root privilege, then parse and plot with command :: |
| |
| sudo ./amd_pstate_trace.py [-c cpus] -n <test_name> -i <interval> [-m kbytes] |
| |
| The test result can be found in ``results/test_name``. Following is the example |
| about part of the output. :: |
| |
| common_cpu common_secs common_usecs min_perf des_perf max_perf freq mperf apef tsc load duration_ms sample_num elapsed_time common_comm |
| CPU_005 712 116384 39 49 166 0.7565 9645075 2214891 38431470 25.1 11.646 469 2.496 kworker/5:0-40 |
| CPU_006 712 116408 39 49 166 0.6769 8950227 1839034 37192089 24.06 11.272 470 2.496 kworker/6:0-1264 |
| |
| Unit Tests for amd-pstate |
| ------------------------- |
| |
| ``amd-pstate-ut`` is a test module for testing the ``amd-pstate`` driver. |
| |
| * It can help all users to verify their processor support (SBIOS/Firmware or Hardware). |
| |
| * Kernel can have a basic function test to avoid the kernel regression during the update. |
| |
| * We can introduce more functional or performance tests to align the result together, it will benefit power and performance scale optimization. |
| |
| 1. Test case descriptions |
| |
| 1). Basic tests |
| |
| Test prerequisite and basic functions for the ``amd-pstate`` driver. |
| |
| +---------+--------------------------------+------------------------------------------------------------------------------------+ |
| | Index | Functions | Description | |
| +=========+================================+====================================================================================+ |
| | 1 | amd_pstate_ut_acpi_cpc_valid || Check whether the _CPC object is present in SBIOS. | |
| | | || | |
| | | || The detail refer to `Processor Support <processor_support_>`_. | |
| +---------+--------------------------------+------------------------------------------------------------------------------------+ |
| | 2 | amd_pstate_ut_check_enabled || Check whether AMD P-State is enabled. | |
| | | || | |
| | | || AMD P-States and ACPI hardware P-States always can be supported in one processor. | |
| | | | But AMD P-States has the higher priority and if it is enabled with | |
| | | | :c:macro:`MSR_AMD_CPPC_ENABLE` or ``cppc_set_enable``, it will respond to the | |
| | | | request from AMD P-States. | |
| +---------+--------------------------------+------------------------------------------------------------------------------------+ |
| | 3 | amd_pstate_ut_check_perf || Check if the each performance values are reasonable. | |
| | | || highest_perf >= nominal_perf > lowest_nonlinear_perf > lowest_perf > 0. | |
| +---------+--------------------------------+------------------------------------------------------------------------------------+ |
| | 4 | amd_pstate_ut_check_freq || Check if the each frequency values and max freq when set support boost mode | |
| | | | are reasonable. | |
| | | || max_freq >= nominal_freq > lowest_nonlinear_freq > min_freq > 0 | |
| | | || If boost is not active but supported, this maximum frequency will be larger than | |
| | | | the one in ``cpuinfo``. | |
| +---------+--------------------------------+------------------------------------------------------------------------------------+ |
| |
| 2). Tbench test |
| |
| Test and monitor the cpu changes when running tbench benchmark under the specified governor. |
| These changes include desire performance, frequency, load, performance, energy etc. |
| The specified governor is ondemand or schedutil. |
| Tbench can also be tested on the ``acpi-cpufreq`` kernel driver for comparison. |
| |
| 3). Gitsource test |
| |
| Test and monitor the cpu changes when running gitsource benchmark under the specified governor. |
| These changes include desire performance, frequency, load, time, energy etc. |
| The specified governor is ondemand or schedutil. |
| Gitsource can also be tested on the ``acpi-cpufreq`` kernel driver for comparison. |
| |
| #. How to execute the tests |
| |
| We use test module in the kselftest frameworks to implement it. |
| We create ``amd-pstate-ut`` module and tie it into kselftest.(for |
| details refer to Linux Kernel Selftests [4]_). |
| |
| 1). Build |
| |
| + open the :c:macro:`CONFIG_X86_AMD_PSTATE` configuration option. |
| + set the :c:macro:`CONFIG_X86_AMD_PSTATE_UT` configuration option to M. |
| + make project |
| + make selftest :: |
| |
| $ cd linux |
| $ make -C tools/testing/selftests |
| |
| + make perf :: |
| |
| $ cd tools/perf/ |
| $ make |
| |
| |
| 2). Installation & Steps :: |
| |
| $ make -C tools/testing/selftests install INSTALL_PATH=~/kselftest |
| $ cp tools/perf/perf /usr/bin/perf |
| $ sudo ./kselftest/run_kselftest.sh -c amd-pstate |
| |
| 3). Specified test case :: |
| |
| $ cd ~/kselftest/amd-pstate |
| $ sudo ./run.sh -t basic |
| $ sudo ./run.sh -t tbench |
| $ sudo ./run.sh -t tbench -m acpi-cpufreq |
| $ sudo ./run.sh -t gitsource |
| $ sudo ./run.sh -t gitsource -m acpi-cpufreq |
| $ ./run.sh --help |
| ./run.sh: illegal option -- - |
| Usage: ./run.sh [OPTION...] |
| [-h <help>] |
| [-o <output-file-for-dump>] |
| [-c <all: All testing, |
| basic: Basic testing, |
| tbench: Tbench testing, |
| gitsource: Gitsource testing.>] |
| [-t <tbench time limit>] |
| [-p <tbench process number>] |
| [-l <loop times for tbench>] |
| [-i <amd tracer interval>] |
| [-m <comparative test: acpi-cpufreq>] |
| |
| |
| 4). Results |
| |
| + basic |
| |
| When you finish test, you will get the following log info :: |
| |
| $ dmesg | grep "amd_pstate_ut" | tee log.txt |
| [12977.570663] amd_pstate_ut: 1 amd_pstate_ut_acpi_cpc_valid success! |
| [12977.570673] amd_pstate_ut: 2 amd_pstate_ut_check_enabled success! |
| [12977.571207] amd_pstate_ut: 3 amd_pstate_ut_check_perf success! |
| [12977.571212] amd_pstate_ut: 4 amd_pstate_ut_check_freq success! |
| |
| + tbench |
| |
| When you finish test, you will get selftest.tbench.csv and png images. |
| The selftest.tbench.csv file contains the raw data and the drop of the comparative test. |
| The png images shows the performance, energy and performan per watt of each test. |
| Open selftest.tbench.csv : |
| |
| +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ |
| + Governor | Round | Des-perf | Freq | Load | Performance | Energy | Performance Per Watt | |
| +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ |
| + Unit | | | GHz | | MB/s | J | MB/J | |
| +=================================================+==============+==========+=========+==========+=============+=========+======================+ |
| + amd-pstate-ondemand | 1 | | | | 2504.05 | 1563.67 | 158.5378 | |
| +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ |
| + amd-pstate-ondemand | 2 | | | | 2243.64 | 1430.32 | 155.2941 | |
| +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ |
| + amd-pstate-ondemand | 3 | | | | 2183.88 | 1401.32 | 154.2860 | |
| +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ |
| + amd-pstate-ondemand | Average | | | | 2310.52 | 1465.1 | 156.1268 | |
| +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ |
| + amd-pstate-schedutil | 1 | 165.329 | 1.62257 | 99.798 | 2136.54 | 1395.26 | 151.5971 | |
| +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ |
| + amd-pstate-schedutil | 2 | 166 | 1.49761 | 99.9993 | 2100.56 | 1380.5 | 150.6377 | |
| +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ |
| + amd-pstate-schedutil | 3 | 166 | 1.47806 | 99.9993 | 2084.12 | 1375.76 | 149.9737 | |
| +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ |
| + amd-pstate-schedutil | Average | 165.776 | 1.53275 | 99.9322 | 2107.07 | 1383.84 | 150.7399 | |
| +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ |
| + acpi-cpufreq-ondemand | 1 | | | | 2529.9 | 1564.4 | 160.0997 | |
| +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ |
| + acpi-cpufreq-ondemand | 2 | | | | 2249.76 | 1432.97 | 155.4297 | |
| +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ |
| + acpi-cpufreq-ondemand | 3 | | | | 2181.46 | 1406.88 | 153.5060 | |
| +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ |
| + acpi-cpufreq-ondemand | Average | | | | 2320.37 | 1468.08 | 156.4741 | |
| +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ |
| + acpi-cpufreq-schedutil | 1 | | | | 2137.64 | 1385.24 | 152.7723 | |
| +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ |
| + acpi-cpufreq-schedutil | 2 | | | | 2107.05 | 1372.23 | 152.0138 | |
| +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ |
| + acpi-cpufreq-schedutil | 3 | | | | 2085.86 | 1365.35 | 151.2433 | |
| +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ |
| + acpi-cpufreq-schedutil | Average | | | | 2110.18 | 1374.27 | 152.0136 | |
| +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ |
| + acpi-cpufreq-ondemand VS acpi-cpufreq-schedutil | Comprison(%) | | | | -9.0584 | -6.3899 | -2.8506 | |
| +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ |
| + amd-pstate-ondemand VS amd-pstate-schedutil | Comprison(%) | | | | 8.8053 | -5.5463 | -3.4503 | |
| +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ |
| + acpi-cpufreq-ondemand VS amd-pstate-ondemand | Comprison(%) | | | | -0.4245 | -0.2029 | -0.2219 | |
| +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ |
| + acpi-cpufreq-schedutil VS amd-pstate-schedutil | Comprison(%) | | | | -0.1473 | 0.6963 | -0.8378 | |
| +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+ |
| |
| + gitsource |
| |
| When you finish test, you will get selftest.gitsource.csv and png images. |
| The selftest.gitsource.csv file contains the raw data and the drop of the comparative test. |
| The png images shows the performance, energy and performan per watt of each test. |
| Open selftest.gitsource.csv : |
| |
| +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ |
| + Governor | Round | Des-perf | Freq | Load | Time | Energy | Performance Per Watt | |
| +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ |
| + Unit | | | GHz | | s | J | 1/J | |
| +=================================================+==============+==========+==========+==========+=============+=========+======================+ |
| + amd-pstate-ondemand | 1 | 50.119 | 2.10509 | 23.3076 | 475.69 | 865.78 | 0.001155027 | |
| +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ |
| + amd-pstate-ondemand | 2 | 94.8006 | 1.98771 | 56.6533 | 467.1 | 839.67 | 0.001190944 | |
| +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ |
| + amd-pstate-ondemand | 3 | 76.6091 | 2.53251 | 43.7791 | 467.69 | 855.85 | 0.001168429 | |
| +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ |
| + amd-pstate-ondemand | Average | 73.8429 | 2.20844 | 41.2467 | 470.16 | 853.767 | 0.001171279 | |
| +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ |
| + amd-pstate-schedutil | 1 | 165.919 | 1.62319 | 98.3868 | 464.17 | 866.8 | 0.001153668 | |
| +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ |
| + amd-pstate-schedutil | 2 | 165.97 | 1.31309 | 99.5712 | 480.15 | 880.4 | 0.001135847 | |
| +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ |
| + amd-pstate-schedutil | 3 | 165.973 | 1.28448 | 99.9252 | 481.79 | 867.02 | 0.001153375 | |
| +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ |
| + amd-pstate-schedutil | Average | 165.954 | 1.40692 | 99.2944 | 475.37 | 871.407 | 0.001147569 | |
| +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ |
| + acpi-cpufreq-ondemand | 1 | | | | 2379.62 | 742.96 | 0.001345967 | |
| +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ |
| + acpi-cpufreq-ondemand | 2 | | | | 441.74 | 817.49 | 0.001223256 | |
| +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ |
| + acpi-cpufreq-ondemand | 3 | | | | 455.48 | 820.01 | 0.001219497 | |
| +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ |
| + acpi-cpufreq-ondemand | Average | | | | 425.613 | 793.487 | 0.001260260 | |
| +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ |
| + acpi-cpufreq-schedutil | 1 | | | | 459.69 | 838.54 | 0.001192548 | |
| +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ |
| + acpi-cpufreq-schedutil | 2 | | | | 466.55 | 830.89 | 0.001203528 | |
| +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ |
| + acpi-cpufreq-schedutil | 3 | | | | 470.38 | 837.32 | 0.001194286 | |
| +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ |
| + acpi-cpufreq-schedutil | Average | | | | 465.54 | 835.583 | 0.001196769 | |
| +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ |
| + acpi-cpufreq-ondemand VS acpi-cpufreq-schedutil | Comprison(%) | | | | 9.3810 | 5.3051 | -5.0379 | |
| +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ |
| + amd-pstate-ondemand VS amd-pstate-schedutil | Comprison(%) | 124.7392 | -36.2934 | 140.7329 | 1.1081 | 2.0661 | -2.0242 | |
| +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ |
| + acpi-cpufreq-ondemand VS amd-pstate-ondemand | Comprison(%) | | | | 10.4665 | 7.5968 | -7.0605 | |
| +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ |
| + acpi-cpufreq-schedutil VS amd-pstate-schedutil | Comprison(%) | | | | 2.1115 | 4.2873 | -4.1110 | |
| +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+ |
| |
| Reference |
| =========== |
| |
| .. [1] AMD64 Architecture Programmer's Manual Volume 2: System Programming, |
| https://www.amd.com/system/files/TechDocs/24593.pdf |
| |
| .. [2] Advanced Configuration and Power Interface Specification, |
| https://uefi.org/sites/default/files/resources/ACPI_Spec_6_4_Jan22.pdf |
| |
| .. [3] Processor Programming Reference (PPR) for AMD Family 19h Model 51h, Revision A1 Processors |
| https://www.amd.com/system/files/TechDocs/56569-A1-PUB.zip |
| |
| .. [4] Linux Kernel Selftests, |
| https://www.kernel.org/doc/html/latest/dev-tools/kselftest.html |
