| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright (c) 2019 Mohammad Rasim <mohammad.rasim96@gmail.com> |
| */ |
| |
| /dts-v1/; |
| |
| #include "meson-gxbb-p20x.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/leds/common.h> |
| #include <dt-bindings/sound/meson-aiu.h> |
| |
| / { |
| compatible = "videostrong,kii-pro", "amlogic,meson-gxbb"; |
| model = "Videostrong KII Pro"; |
| |
| spdif_dit: audio-codec-0 { |
| #sound-dai-cells = <0>; |
| compatible = "linux,spdif-dit"; |
| sound-name-prefix = "DIT"; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| led { |
| gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>; |
| color = <LED_COLOR_ID_RED>; |
| function = LED_FUNCTION_STATUS; |
| default-state = "off"; |
| }; |
| }; |
| |
| gpio-keys-polled { |
| compatible = "gpio-keys-polled"; |
| poll-interval = <20>; |
| |
| button-reset { |
| label = "reset"; |
| linux,code = <KEY_POWER>; |
| gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| sound { |
| compatible = "amlogic,gx-sound-card"; |
| model = "KII-PRO"; |
| assigned-clocks = <&clkc CLKID_MPLL0>, |
| <&clkc CLKID_MPLL1>, |
| <&clkc CLKID_MPLL2>; |
| assigned-clock-parents = <0>, <0>, <0>; |
| assigned-clock-rates = <294912000>, |
| <270950400>, |
| <393216000>; |
| |
| dai-link-0 { |
| sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; |
| }; |
| |
| dai-link-1 { |
| sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>; |
| }; |
| |
| dai-link-2 { |
| sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; |
| dai-format = "i2s"; |
| mclk-fs = <256>; |
| |
| codec-0 { |
| sound-dai = <&aiu AIU_HDMI CTRL_I2S>; |
| }; |
| }; |
| |
| dai-link-3 { |
| sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>; |
| |
| codec-0 { |
| sound-dai = <&spdif_dit>; |
| }; |
| }; |
| |
| dai-link-4 { |
| sound-dai = <&aiu AIU_HDMI CTRL_OUT>; |
| |
| codec-0 { |
| sound-dai = <&hdmi_tx>; |
| }; |
| }; |
| }; |
| }; |
| |
| &aiu { |
| status = "okay"; |
| pinctrl-0 = <&spdif_out_y_pins>; |
| pinctrl-names = "default"; |
| }; |
| |
| ðmac { |
| status = "okay"; |
| pinctrl-0 = <ð_rmii_pins>; |
| pinctrl-names = "default"; |
| |
| phy-handle = <ð_phy0>; |
| phy-mode = "rmii"; |
| |
| mdio { |
| compatible = "snps,dwmac-mdio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| eth_phy0: ethernet-phy@0 { |
| /* IC Plus IP101GR (0x02430c54) */ |
| reg = <0>; |
| reset-assert-us = <10000>; |
| reset-deassert-us = <10000>; |
| reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| }; |
| |
| &ir { |
| linux,rc-map-name = "rc-videostrong-kii-pro"; |
| }; |
| |
| &uart_A { |
| status = "okay"; |
| pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; |
| pinctrl-names = "default"; |
| uart-has-rtscts; |
| |
| bluetooth { |
| compatible = "brcm,bcm4335a0"; |
| shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>; |
| host-wakeup-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>; |
| max-speed = <2000000>; |
| clocks = <&wifi32k>; |
| clock-names = "lpo"; |
| }; |
| }; |