| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Marvell Armada 37xx SoC Peripheral clocks |
| * |
| * Copyright (C) 2016 Marvell |
| * |
| * Gregory CLEMENT <gregory.clement@free-electrons.com> |
| * |
| * Most of the peripheral clocks can be modelled like this: |
| * _____ _______ _______ |
| * TBG-A-P --| | | | | | ______ |
| * TBG-B-P --| Mux |--| /div1 |--| /div2 |--| Gate |--> perip_clk |
| * TBG-A-S --| | | | | | |______| |
| * TBG-B-S --|_____| |_______| |_______| |
| * |
| * However some clocks may use only one or two block or and use the |
| * xtal clock as parent. |
| */ |
| |
| #include <linux/clk-provider.h> |
| #include <linux/io.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/slab.h> |
| #include <linux/jiffies.h> |
| |
| #define TBG_SEL 0x0 |
| #define DIV_SEL0 0x4 |
| #define DIV_SEL1 0x8 |
| #define DIV_SEL2 0xC |
| #define CLK_SEL 0x10 |
| #define CLK_DIS 0x14 |
| |
| #define ARMADA_37XX_DVFS_LOAD_1 1 |
| #define LOAD_LEVEL_NR 4 |
| |
| #define ARMADA_37XX_NB_L0L1 0x18 |
| #define ARMADA_37XX_NB_L2L3 0x1C |
| #define ARMADA_37XX_NB_TBG_DIV_OFF 13 |
| #define ARMADA_37XX_NB_TBG_DIV_MASK 0x7 |
| #define ARMADA_37XX_NB_CLK_SEL_OFF 11 |
| #define ARMADA_37XX_NB_CLK_SEL_MASK 0x1 |
| #define ARMADA_37XX_NB_TBG_SEL_OFF 9 |
| #define ARMADA_37XX_NB_TBG_SEL_MASK 0x3 |
| #define ARMADA_37XX_NB_CONFIG_SHIFT 16 |
| #define ARMADA_37XX_NB_DYN_MOD 0x24 |
| #define ARMADA_37XX_NB_DFS_EN 31 |
| #define ARMADA_37XX_NB_CPU_LOAD 0x30 |
| #define ARMADA_37XX_NB_CPU_LOAD_MASK 0x3 |
| #define ARMADA_37XX_DVFS_LOAD_0 0 |
| #define ARMADA_37XX_DVFS_LOAD_1 1 |
| #define ARMADA_37XX_DVFS_LOAD_2 2 |
| #define ARMADA_37XX_DVFS_LOAD_3 3 |
| |
| struct clk_periph_driver_data { |
| struct clk_hw_onecell_data *hw_data; |
| spinlock_t lock; |
| void __iomem *reg; |
| |
| /* Storage registers for suspend/resume operations */ |
| u32 tbg_sel; |
| u32 div_sel0; |
| u32 div_sel1; |
| u32 div_sel2; |
| u32 clk_sel; |
| u32 clk_dis; |
| }; |
| |
| struct clk_double_div { |
| struct clk_hw hw; |
| void __iomem *reg1; |
| u8 shift1; |
| void __iomem *reg2; |
| u8 shift2; |
| }; |
| |
| struct clk_pm_cpu { |
| struct clk_hw hw; |
| void __iomem *reg_mux; |
| u8 shift_mux; |
| u32 mask_mux; |
| void __iomem *reg_div; |
| u8 shift_div; |
| struct regmap *nb_pm_base; |
| unsigned long l1_expiration; |
| }; |
| |
| #define to_clk_double_div(_hw) container_of(_hw, struct clk_double_div, hw) |
| #define to_clk_pm_cpu(_hw) container_of(_hw, struct clk_pm_cpu, hw) |
| |
| struct clk_periph_data { |
| const char *name; |
| const char * const *parent_names; |
| int num_parents; |
| struct clk_hw *mux_hw; |
| struct clk_hw *rate_hw; |
| struct clk_hw *gate_hw; |
| struct clk_hw *muxrate_hw; |
| bool is_double_div; |
| }; |
| |
| static const struct clk_div_table clk_table6[] = { |
| { .val = 1, .div = 1, }, |
| { .val = 2, .div = 2, }, |
| { .val = 3, .div = 3, }, |
| { .val = 4, .div = 4, }, |
| { .val = 5, .div = 5, }, |
| { .val = 6, .div = 6, }, |
| { .val = 0, .div = 0, }, /* last entry */ |
| }; |
| |
| static const struct clk_div_table clk_table1[] = { |
| { .val = 0, .div = 1, }, |
| { .val = 1, .div = 2, }, |
| { .val = 0, .div = 0, }, /* last entry */ |
| }; |
| |
| static const struct clk_div_table clk_table2[] = { |
| { .val = 0, .div = 2, }, |
| { .val = 1, .div = 4, }, |
| { .val = 0, .div = 0, }, /* last entry */ |
| }; |
| |
| static const struct clk_ops clk_double_div_ops; |
| static const struct clk_ops clk_pm_cpu_ops; |
| |
| #define PERIPH_GATE(_name, _bit) \ |
| struct clk_gate gate_##_name = { \ |
| .reg = (void *)CLK_DIS, \ |
| .bit_idx = _bit, \ |
| .hw.init = &(struct clk_init_data){ \ |
| .ops = &clk_gate_ops, \ |
| } \ |
| }; |
| |
| #define PERIPH_MUX(_name, _shift) \ |
| struct clk_mux mux_##_name = { \ |
| .reg = (void *)TBG_SEL, \ |
| .shift = _shift, \ |
| .mask = 3, \ |
| .hw.init = &(struct clk_init_data){ \ |
| .ops = &clk_mux_ro_ops, \ |
| } \ |
| }; |
| |
| #define PERIPH_DOUBLEDIV(_name, _reg1, _reg2, _shift1, _shift2) \ |
| struct clk_double_div rate_##_name = { \ |
| .reg1 = (void *)_reg1, \ |
| .reg2 = (void *)_reg2, \ |
| .shift1 = _shift1, \ |
| .shift2 = _shift2, \ |
| .hw.init = &(struct clk_init_data){ \ |
| .ops = &clk_double_div_ops, \ |
| } \ |
| }; |
| |
| #define PERIPH_DIV(_name, _reg, _shift, _table) \ |
| struct clk_divider rate_##_name = { \ |
| .reg = (void *)_reg, \ |
| .table = _table, \ |
| .shift = _shift, \ |
| .hw.init = &(struct clk_init_data){ \ |
| .ops = &clk_divider_ro_ops, \ |
| } \ |
| }; |
| |
| #define PERIPH_PM_CPU(_name, _shift1, _reg, _shift2) \ |
| struct clk_pm_cpu muxrate_##_name = { \ |
| .reg_mux = (void *)TBG_SEL, \ |
| .mask_mux = 3, \ |
| .shift_mux = _shift1, \ |
| .reg_div = (void *)_reg, \ |
| .shift_div = _shift2, \ |
| .hw.init = &(struct clk_init_data){ \ |
| .ops = &clk_pm_cpu_ops, \ |
| } \ |
| }; |
| |
| #define PERIPH_CLK_FULL_DD(_name, _bit, _shift, _reg1, _reg2, _shift1, _shift2)\ |
| static PERIPH_GATE(_name, _bit); \ |
| static PERIPH_MUX(_name, _shift); \ |
| static PERIPH_DOUBLEDIV(_name, _reg1, _reg2, _shift1, _shift2); |
| |
| #define PERIPH_CLK_FULL(_name, _bit, _shift, _reg, _shift1, _table) \ |
| static PERIPH_GATE(_name, _bit); \ |
| static PERIPH_MUX(_name, _shift); \ |
| static PERIPH_DIV(_name, _reg, _shift1, _table); |
| |
| #define PERIPH_CLK_GATE_DIV(_name, _bit, _reg, _shift, _table) \ |
| static PERIPH_GATE(_name, _bit); \ |
| static PERIPH_DIV(_name, _reg, _shift, _table); |
| |
| #define PERIPH_CLK_MUX_DD(_name, _shift, _reg1, _reg2, _shift1, _shift2)\ |
| static PERIPH_MUX(_name, _shift); \ |
| static PERIPH_DOUBLEDIV(_name, _reg1, _reg2, _shift1, _shift2); |
| |
| #define REF_CLK_FULL(_name) \ |
| { .name = #_name, \ |
| .parent_names = (const char *[]){ "TBG-A-P", \ |
| "TBG-B-P", "TBG-A-S", "TBG-B-S"}, \ |
| .num_parents = 4, \ |
| .mux_hw = &mux_##_name.hw, \ |
| .gate_hw = &gate_##_name.hw, \ |
| .rate_hw = &rate_##_name.hw, \ |
| } |
| |
| #define REF_CLK_FULL_DD(_name) \ |
| { .name = #_name, \ |
| .parent_names = (const char *[]){ "TBG-A-P", \ |
| "TBG-B-P", "TBG-A-S", "TBG-B-S"}, \ |
| .num_parents = 4, \ |
| .mux_hw = &mux_##_name.hw, \ |
| .gate_hw = &gate_##_name.hw, \ |
| .rate_hw = &rate_##_name.hw, \ |
| .is_double_div = true, \ |
| } |
| |
| #define REF_CLK_GATE(_name, _parent_name) \ |
| { .name = #_name, \ |
| .parent_names = (const char *[]){ _parent_name}, \ |
| .num_parents = 1, \ |
| .gate_hw = &gate_##_name.hw, \ |
| } |
| |
| #define REF_CLK_GATE_DIV(_name, _parent_name) \ |
| { .name = #_name, \ |
| .parent_names = (const char *[]){ _parent_name}, \ |
| .num_parents = 1, \ |
| .gate_hw = &gate_##_name.hw, \ |
| .rate_hw = &rate_##_name.hw, \ |
| } |
| |
| #define REF_CLK_PM_CPU(_name) \ |
| { .name = #_name, \ |
| .parent_names = (const char *[]){ "TBG-A-P", \ |
| "TBG-B-P", "TBG-A-S", "TBG-B-S"}, \ |
| .num_parents = 4, \ |
| .muxrate_hw = &muxrate_##_name.hw, \ |
| } |
| |
| #define REF_CLK_MUX_DD(_name) \ |
| { .name = #_name, \ |
| .parent_names = (const char *[]){ "TBG-A-P", \ |
| "TBG-B-P", "TBG-A-S", "TBG-B-S"}, \ |
| .num_parents = 4, \ |
| .mux_hw = &mux_##_name.hw, \ |
| .rate_hw = &rate_##_name.hw, \ |
| .is_double_div = true, \ |
| } |
| |
| /* NB periph clocks */ |
| PERIPH_CLK_FULL_DD(mmc, 2, 0, DIV_SEL2, DIV_SEL2, 16, 13); |
| PERIPH_CLK_FULL_DD(sata_host, 3, 2, DIV_SEL2, DIV_SEL2, 10, 7); |
| PERIPH_CLK_FULL_DD(sec_at, 6, 4, DIV_SEL1, DIV_SEL1, 3, 0); |
| PERIPH_CLK_FULL_DD(sec_dap, 7, 6, DIV_SEL1, DIV_SEL1, 9, 6); |
| PERIPH_CLK_FULL_DD(tscem, 8, 8, DIV_SEL1, DIV_SEL1, 15, 12); |
| PERIPH_CLK_FULL(tscem_tmx, 10, 10, DIV_SEL1, 18, clk_table6); |
| static PERIPH_GATE(avs, 11); |
| PERIPH_CLK_FULL_DD(pwm, 13, 14, DIV_SEL0, DIV_SEL0, 3, 0); |
| PERIPH_CLK_FULL_DD(sqf, 12, 12, DIV_SEL1, DIV_SEL1, 27, 24); |
| static PERIPH_GATE(i2c_2, 16); |
| static PERIPH_GATE(i2c_1, 17); |
| PERIPH_CLK_GATE_DIV(ddr_phy, 19, DIV_SEL0, 18, clk_table2); |
| PERIPH_CLK_FULL_DD(ddr_fclk, 21, 16, DIV_SEL0, DIV_SEL0, 15, 12); |
| PERIPH_CLK_FULL(trace, 22, 18, DIV_SEL0, 20, clk_table6); |
| PERIPH_CLK_FULL(counter, 23, 20, DIV_SEL0, 23, clk_table6); |
| PERIPH_CLK_FULL_DD(eip97, 24, 24, DIV_SEL2, DIV_SEL2, 22, 19); |
| static PERIPH_PM_CPU(cpu, 22, DIV_SEL0, 28); |
| |
| static struct clk_periph_data data_nb[] = { |
| REF_CLK_FULL_DD(mmc), |
| REF_CLK_FULL_DD(sata_host), |
| REF_CLK_FULL_DD(sec_at), |
| REF_CLK_FULL_DD(sec_dap), |
| REF_CLK_FULL_DD(tscem), |
| REF_CLK_FULL(tscem_tmx), |
| REF_CLK_GATE(avs, "xtal"), |
| REF_CLK_FULL_DD(sqf), |
| REF_CLK_FULL_DD(pwm), |
| REF_CLK_GATE(i2c_2, "xtal"), |
| REF_CLK_GATE(i2c_1, "xtal"), |
| REF_CLK_GATE_DIV(ddr_phy, "TBG-A-S"), |
| REF_CLK_FULL_DD(ddr_fclk), |
| REF_CLK_FULL(trace), |
| REF_CLK_FULL(counter), |
| REF_CLK_FULL_DD(eip97), |
| REF_CLK_PM_CPU(cpu), |
| { }, |
| }; |
| |
| /* SB periph clocks */ |
| PERIPH_CLK_MUX_DD(gbe_50, 6, DIV_SEL2, DIV_SEL2, 6, 9); |
| PERIPH_CLK_MUX_DD(gbe_core, 8, DIV_SEL1, DIV_SEL1, 18, 21); |
| PERIPH_CLK_MUX_DD(gbe_125, 10, DIV_SEL1, DIV_SEL1, 6, 9); |
| static PERIPH_GATE(gbe1_50, 0); |
| static PERIPH_GATE(gbe0_50, 1); |
| static PERIPH_GATE(gbe1_125, 2); |
| static PERIPH_GATE(gbe0_125, 3); |
| PERIPH_CLK_GATE_DIV(gbe1_core, 4, DIV_SEL1, 13, clk_table1); |
| PERIPH_CLK_GATE_DIV(gbe0_core, 5, DIV_SEL1, 14, clk_table1); |
| PERIPH_CLK_GATE_DIV(gbe_bm, 12, DIV_SEL1, 0, clk_table1); |
| PERIPH_CLK_FULL_DD(sdio, 11, 14, DIV_SEL0, DIV_SEL0, 3, 6); |
| PERIPH_CLK_FULL_DD(usb32_usb2_sys, 16, 16, DIV_SEL0, DIV_SEL0, 9, 12); |
| PERIPH_CLK_FULL_DD(usb32_ss_sys, 17, 18, DIV_SEL0, DIV_SEL0, 15, 18); |
| static PERIPH_GATE(pcie, 14); |
| |
| static struct clk_periph_data data_sb[] = { |
| REF_CLK_MUX_DD(gbe_50), |
| REF_CLK_MUX_DD(gbe_core), |
| REF_CLK_MUX_DD(gbe_125), |
| REF_CLK_GATE(gbe1_50, "gbe_50"), |
| REF_CLK_GATE(gbe0_50, "gbe_50"), |
| REF_CLK_GATE(gbe1_125, "gbe_125"), |
| REF_CLK_GATE(gbe0_125, "gbe_125"), |
| REF_CLK_GATE_DIV(gbe1_core, "gbe_core"), |
| REF_CLK_GATE_DIV(gbe0_core, "gbe_core"), |
| REF_CLK_GATE_DIV(gbe_bm, "gbe_core"), |
| REF_CLK_FULL_DD(sdio), |
| REF_CLK_FULL_DD(usb32_usb2_sys), |
| REF_CLK_FULL_DD(usb32_ss_sys), |
| REF_CLK_GATE(pcie, "gbe_core"), |
| { }, |
| }; |
| |
| static unsigned int get_div(void __iomem *reg, int shift) |
| { |
| u32 val; |
| |
| val = (readl(reg) >> shift) & 0x7; |
| if (val > 6) |
| return 0; |
| return val; |
| } |
| |
| static unsigned long clk_double_div_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct clk_double_div *double_div = to_clk_double_div(hw); |
| unsigned int div; |
| |
| div = get_div(double_div->reg1, double_div->shift1); |
| div *= get_div(double_div->reg2, double_div->shift2); |
| |
| return DIV_ROUND_UP_ULL((u64)parent_rate, div); |
| } |
| |
| static const struct clk_ops clk_double_div_ops = { |
| .recalc_rate = clk_double_div_recalc_rate, |
| }; |
| |
| static void armada_3700_pm_dvfs_update_regs(unsigned int load_level, |
| unsigned int *reg, |
| unsigned int *offset) |
| { |
| if (load_level <= ARMADA_37XX_DVFS_LOAD_1) |
| *reg = ARMADA_37XX_NB_L0L1; |
| else |
| *reg = ARMADA_37XX_NB_L2L3; |
| |
| if (load_level == ARMADA_37XX_DVFS_LOAD_0 || |
| load_level == ARMADA_37XX_DVFS_LOAD_2) |
| *offset += ARMADA_37XX_NB_CONFIG_SHIFT; |
| } |
| |
| static bool armada_3700_pm_dvfs_is_enabled(struct regmap *base) |
| { |
| unsigned int val, reg = ARMADA_37XX_NB_DYN_MOD; |
| |
| if (IS_ERR(base)) |
| return false; |
| |
| regmap_read(base, reg, &val); |
| |
| return !!(val & BIT(ARMADA_37XX_NB_DFS_EN)); |
| } |
| |
| static unsigned int armada_3700_pm_dvfs_get_cpu_div(struct regmap *base) |
| { |
| unsigned int reg = ARMADA_37XX_NB_CPU_LOAD; |
| unsigned int offset = ARMADA_37XX_NB_TBG_DIV_OFF; |
| unsigned int load_level, div; |
| |
| /* |
| * This function is always called after the function |
| * armada_3700_pm_dvfs_is_enabled, so no need to check again |
| * if the base is valid. |
| */ |
| regmap_read(base, reg, &load_level); |
| |
| /* |
| * The register and the offset inside this register accessed to |
| * read the current divider depend on the load level |
| */ |
| load_level &= ARMADA_37XX_NB_CPU_LOAD_MASK; |
| armada_3700_pm_dvfs_update_regs(load_level, ®, &offset); |
| |
| regmap_read(base, reg, &div); |
| |
| return (div >> offset) & ARMADA_37XX_NB_TBG_DIV_MASK; |
| } |
| |
| static unsigned int armada_3700_pm_dvfs_get_cpu_parent(struct regmap *base) |
| { |
| unsigned int reg = ARMADA_37XX_NB_CPU_LOAD; |
| unsigned int offset = ARMADA_37XX_NB_TBG_SEL_OFF; |
| unsigned int load_level, sel; |
| |
| /* |
| * This function is always called after the function |
| * armada_3700_pm_dvfs_is_enabled, so no need to check again |
| * if the base is valid |
| */ |
| regmap_read(base, reg, &load_level); |
| |
| /* |
| * The register and the offset inside this register accessed to |
| * read the current divider depend on the load level |
| */ |
| load_level &= ARMADA_37XX_NB_CPU_LOAD_MASK; |
| armada_3700_pm_dvfs_update_regs(load_level, ®, &offset); |
| |
| regmap_read(base, reg, &sel); |
| |
| return (sel >> offset) & ARMADA_37XX_NB_TBG_SEL_MASK; |
| } |
| |
| static u8 clk_pm_cpu_get_parent(struct clk_hw *hw) |
| { |
| struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw); |
| u32 val; |
| |
| if (armada_3700_pm_dvfs_is_enabled(pm_cpu->nb_pm_base)) { |
| val = armada_3700_pm_dvfs_get_cpu_parent(pm_cpu->nb_pm_base); |
| } else { |
| val = readl(pm_cpu->reg_mux) >> pm_cpu->shift_mux; |
| val &= pm_cpu->mask_mux; |
| } |
| |
| return val; |
| } |
| |
| static unsigned long clk_pm_cpu_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw); |
| unsigned int div; |
| |
| if (armada_3700_pm_dvfs_is_enabled(pm_cpu->nb_pm_base)) |
| div = armada_3700_pm_dvfs_get_cpu_div(pm_cpu->nb_pm_base); |
| else |
| div = get_div(pm_cpu->reg_div, pm_cpu->shift_div); |
| return DIV_ROUND_UP_ULL((u64)parent_rate, div); |
| } |
| |
| static long clk_pm_cpu_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *parent_rate) |
| { |
| struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw); |
| struct regmap *base = pm_cpu->nb_pm_base; |
| unsigned int div = *parent_rate / rate; |
| unsigned int load_level; |
| /* only available when DVFS is enabled */ |
| if (!armada_3700_pm_dvfs_is_enabled(base)) |
| return -EINVAL; |
| |
| for (load_level = 0; load_level < LOAD_LEVEL_NR; load_level++) { |
| unsigned int reg, val, offset = ARMADA_37XX_NB_TBG_DIV_OFF; |
| |
| armada_3700_pm_dvfs_update_regs(load_level, ®, &offset); |
| |
| regmap_read(base, reg, &val); |
| |
| val >>= offset; |
| val &= ARMADA_37XX_NB_TBG_DIV_MASK; |
| if (val == div) |
| /* |
| * We found a load level matching the target |
| * divider, switch to this load level and |
| * return. |
| */ |
| return *parent_rate / div; |
| } |
| |
| /* We didn't find any valid divider */ |
| return -EINVAL; |
| } |
| |
| /* |
| * Workaround when base CPU frequnecy is 1000 or 1200 MHz |
| * |
| * Switching the CPU from the L2 or L3 frequencies (250/300 or 200 MHz |
| * respectively) to L0 frequency (1/1.2 GHz) requires a significant |
| * amount of time to let VDD stabilize to the appropriate |
| * voltage. This amount of time is large enough that it cannot be |
| * covered by the hardware countdown register. Due to this, the CPU |
| * might start operating at L0 before the voltage is stabilized, |
| * leading to CPU stalls. |
| * |
| * To work around this problem, we prevent switching directly from the |
| * L2/L3 frequencies to the L0 frequency, and instead switch to the L1 |
| * frequency in-between. The sequence therefore becomes: |
| * 1. First switch from L2/L3 (200/250/300 MHz) to L1 (500/600 MHz) |
| * 2. Sleep 20ms for stabling VDD voltage |
| * 3. Then switch from L1 (500/600 MHz) to L0 (1000/1200 MHz). |
| */ |
| static void clk_pm_cpu_set_rate_wa(struct clk_pm_cpu *pm_cpu, |
| unsigned int new_level, unsigned long rate, |
| struct regmap *base) |
| { |
| unsigned int cur_level; |
| |
| regmap_read(base, ARMADA_37XX_NB_CPU_LOAD, &cur_level); |
| cur_level &= ARMADA_37XX_NB_CPU_LOAD_MASK; |
| |
| if (cur_level == new_level) |
| return; |
| |
| /* |
| * System wants to go to L1 on its own. If we are going from L2/L3, |
| * remember when 20ms will expire. If from L0, set the value so that |
| * next switch to L0 won't have to wait. |
| */ |
| if (new_level == ARMADA_37XX_DVFS_LOAD_1) { |
| if (cur_level == ARMADA_37XX_DVFS_LOAD_0) |
| pm_cpu->l1_expiration = jiffies; |
| else |
| pm_cpu->l1_expiration = jiffies + msecs_to_jiffies(20); |
| return; |
| } |
| |
| /* |
| * If we are setting to L2/L3, just invalidate L1 expiration time, |
| * sleeping is not needed. |
| */ |
| if (rate < 1000*1000*1000) |
| goto invalidate_l1_exp; |
| |
| /* |
| * We are going to L0 with rate >= 1GHz. Check whether we have been at |
| * L1 for long enough time. If not, go to L1 for 20ms. |
| */ |
| if (pm_cpu->l1_expiration && time_is_before_eq_jiffies(pm_cpu->l1_expiration)) |
| goto invalidate_l1_exp; |
| |
| regmap_update_bits(base, ARMADA_37XX_NB_CPU_LOAD, |
| ARMADA_37XX_NB_CPU_LOAD_MASK, |
| ARMADA_37XX_DVFS_LOAD_1); |
| msleep(20); |
| |
| invalidate_l1_exp: |
| pm_cpu->l1_expiration = 0; |
| } |
| |
| static int clk_pm_cpu_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw); |
| struct regmap *base = pm_cpu->nb_pm_base; |
| unsigned int div = parent_rate / rate; |
| unsigned int load_level; |
| |
| /* only available when DVFS is enabled */ |
| if (!armada_3700_pm_dvfs_is_enabled(base)) |
| return -EINVAL; |
| |
| for (load_level = 0; load_level < LOAD_LEVEL_NR; load_level++) { |
| unsigned int reg, mask, val, |
| offset = ARMADA_37XX_NB_TBG_DIV_OFF; |
| |
| armada_3700_pm_dvfs_update_regs(load_level, ®, &offset); |
| |
| regmap_read(base, reg, &val); |
| val >>= offset; |
| val &= ARMADA_37XX_NB_TBG_DIV_MASK; |
| |
| if (val == div) { |
| /* |
| * We found a load level matching the target |
| * divider, switch to this load level and |
| * return. |
| */ |
| reg = ARMADA_37XX_NB_CPU_LOAD; |
| mask = ARMADA_37XX_NB_CPU_LOAD_MASK; |
| |
| /* Apply workaround when base CPU frequency is 1000 or 1200 MHz */ |
| if (parent_rate >= 1000*1000*1000) |
| clk_pm_cpu_set_rate_wa(pm_cpu, load_level, rate, base); |
| |
| regmap_update_bits(base, reg, mask, load_level); |
| |
| return rate; |
| } |
| } |
| |
| /* We didn't find any valid divider */ |
| return -EINVAL; |
| } |
| |
| static const struct clk_ops clk_pm_cpu_ops = { |
| .get_parent = clk_pm_cpu_get_parent, |
| .round_rate = clk_pm_cpu_round_rate, |
| .set_rate = clk_pm_cpu_set_rate, |
| .recalc_rate = clk_pm_cpu_recalc_rate, |
| }; |
| |
| static const struct of_device_id armada_3700_periph_clock_of_match[] = { |
| { .compatible = "marvell,armada-3700-periph-clock-nb", |
| .data = data_nb, }, |
| { .compatible = "marvell,armada-3700-periph-clock-sb", |
| .data = data_sb, }, |
| { } |
| }; |
| |
| static int armada_3700_add_composite_clk(const struct clk_periph_data *data, |
| void __iomem *reg, spinlock_t *lock, |
| struct device *dev, struct clk_hw **hw) |
| { |
| const struct clk_ops *mux_ops = NULL, *gate_ops = NULL, |
| *rate_ops = NULL; |
| struct clk_hw *mux_hw = NULL, *gate_hw = NULL, *rate_hw = NULL; |
| |
| if (data->mux_hw) { |
| struct clk_mux *mux; |
| |
| mux_hw = data->mux_hw; |
| mux = to_clk_mux(mux_hw); |
| mux->lock = lock; |
| mux_ops = mux_hw->init->ops; |
| mux->reg = reg + (u64)mux->reg; |
| } |
| |
| if (data->gate_hw) { |
| struct clk_gate *gate; |
| |
| gate_hw = data->gate_hw; |
| gate = to_clk_gate(gate_hw); |
| gate->lock = lock; |
| gate_ops = gate_hw->init->ops; |
| gate->reg = reg + (u64)gate->reg; |
| gate->flags = CLK_GATE_SET_TO_DISABLE; |
| } |
| |
| if (data->rate_hw) { |
| rate_hw = data->rate_hw; |
| rate_ops = rate_hw->init->ops; |
| if (data->is_double_div) { |
| struct clk_double_div *rate; |
| |
| rate = to_clk_double_div(rate_hw); |
| rate->reg1 = reg + (u64)rate->reg1; |
| rate->reg2 = reg + (u64)rate->reg2; |
| } else { |
| struct clk_divider *rate = to_clk_divider(rate_hw); |
| const struct clk_div_table *clkt; |
| int table_size = 0; |
| |
| rate->reg = reg + (u64)rate->reg; |
| for (clkt = rate->table; clkt->div; clkt++) |
| table_size++; |
| rate->width = order_base_2(table_size); |
| rate->lock = lock; |
| } |
| } |
| |
| if (data->muxrate_hw) { |
| struct clk_pm_cpu *pmcpu_clk; |
| struct clk_hw *muxrate_hw = data->muxrate_hw; |
| struct regmap *map; |
| |
| pmcpu_clk = to_clk_pm_cpu(muxrate_hw); |
| pmcpu_clk->reg_mux = reg + (u64)pmcpu_clk->reg_mux; |
| pmcpu_clk->reg_div = reg + (u64)pmcpu_clk->reg_div; |
| |
| mux_hw = muxrate_hw; |
| rate_hw = muxrate_hw; |
| mux_ops = muxrate_hw->init->ops; |
| rate_ops = muxrate_hw->init->ops; |
| |
| map = syscon_regmap_lookup_by_compatible( |
| "marvell,armada-3700-nb-pm"); |
| pmcpu_clk->nb_pm_base = map; |
| } |
| |
| *hw = clk_hw_register_composite(dev, data->name, data->parent_names, |
| data->num_parents, mux_hw, |
| mux_ops, rate_hw, rate_ops, |
| gate_hw, gate_ops, CLK_IGNORE_UNUSED); |
| |
| return PTR_ERR_OR_ZERO(*hw); |
| } |
| |
| static int __maybe_unused armada_3700_periph_clock_suspend(struct device *dev) |
| { |
| struct clk_periph_driver_data *data = dev_get_drvdata(dev); |
| |
| data->tbg_sel = readl(data->reg + TBG_SEL); |
| data->div_sel0 = readl(data->reg + DIV_SEL0); |
| data->div_sel1 = readl(data->reg + DIV_SEL1); |
| data->div_sel2 = readl(data->reg + DIV_SEL2); |
| data->clk_sel = readl(data->reg + CLK_SEL); |
| data->clk_dis = readl(data->reg + CLK_DIS); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused armada_3700_periph_clock_resume(struct device *dev) |
| { |
| struct clk_periph_driver_data *data = dev_get_drvdata(dev); |
| |
| /* Follow the same order than what the Cortex-M3 does (ATF code) */ |
| writel(data->clk_dis, data->reg + CLK_DIS); |
| writel(data->div_sel0, data->reg + DIV_SEL0); |
| writel(data->div_sel1, data->reg + DIV_SEL1); |
| writel(data->div_sel2, data->reg + DIV_SEL2); |
| writel(data->tbg_sel, data->reg + TBG_SEL); |
| writel(data->clk_sel, data->reg + CLK_SEL); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops armada_3700_periph_clock_pm_ops = { |
| SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(armada_3700_periph_clock_suspend, |
| armada_3700_periph_clock_resume) |
| }; |
| |
| static int armada_3700_periph_clock_probe(struct platform_device *pdev) |
| { |
| struct clk_periph_driver_data *driver_data; |
| struct device_node *np = pdev->dev.of_node; |
| const struct clk_periph_data *data; |
| struct device *dev = &pdev->dev; |
| int num_periph = 0, i, ret; |
| |
| data = of_device_get_match_data(dev); |
| if (!data) |
| return -ENODEV; |
| |
| while (data[num_periph].name) |
| num_periph++; |
| |
| driver_data = devm_kzalloc(dev, sizeof(*driver_data), GFP_KERNEL); |
| if (!driver_data) |
| return -ENOMEM; |
| |
| driver_data->hw_data = devm_kzalloc(dev, |
| struct_size(driver_data->hw_data, |
| hws, num_periph), |
| GFP_KERNEL); |
| if (!driver_data->hw_data) |
| return -ENOMEM; |
| driver_data->hw_data->num = num_periph; |
| |
| driver_data->reg = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(driver_data->reg)) |
| return PTR_ERR(driver_data->reg); |
| |
| spin_lock_init(&driver_data->lock); |
| |
| for (i = 0; i < num_periph; i++) { |
| struct clk_hw **hw = &driver_data->hw_data->hws[i]; |
| if (armada_3700_add_composite_clk(&data[i], driver_data->reg, |
| &driver_data->lock, dev, hw)) |
| dev_err(dev, "Can't register periph clock %s\n", |
| data[i].name); |
| } |
| |
| ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, |
| driver_data->hw_data); |
| if (ret) { |
| for (i = 0; i < num_periph; i++) |
| clk_hw_unregister(driver_data->hw_data->hws[i]); |
| return ret; |
| } |
| |
| platform_set_drvdata(pdev, driver_data); |
| return 0; |
| } |
| |
| static void armada_3700_periph_clock_remove(struct platform_device *pdev) |
| { |
| struct clk_periph_driver_data *data = platform_get_drvdata(pdev); |
| struct clk_hw_onecell_data *hw_data = data->hw_data; |
| int i; |
| |
| of_clk_del_provider(pdev->dev.of_node); |
| |
| for (i = 0; i < hw_data->num; i++) |
| clk_hw_unregister(hw_data->hws[i]); |
| } |
| |
| static struct platform_driver armada_3700_periph_clock_driver = { |
| .probe = armada_3700_periph_clock_probe, |
| .remove_new = armada_3700_periph_clock_remove, |
| .driver = { |
| .name = "marvell-armada-3700-periph-clock", |
| .of_match_table = armada_3700_periph_clock_of_match, |
| .pm = &armada_3700_periph_clock_pm_ops, |
| }, |
| }; |
| |
| builtin_platform_driver(armada_3700_periph_clock_driver); |