| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * IBM Accelerator Family 'GenWQE' |
| * |
| * (C) Copyright IBM Corp. 2013 |
| * |
| * Author: Frank Haverkamp <haver@linux.vnet.ibm.com> |
| * Author: Joerg-Stephan Vogt <jsvogt@de.ibm.com> |
| * Author: Michael Jung <mijung@gmx.net> |
| * Author: Michael Ruettger <michael@ibmra.de> |
| */ |
| |
| /* |
| * Character device representation of the GenWQE device. This allows |
| * user-space applications to communicate with the card. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/string.h> |
| #include <linux/fs.h> |
| #include <linux/sched/signal.h> |
| #include <linux/wait.h> |
| #include <linux/delay.h> |
| #include <linux/atomic.h> |
| |
| #include "card_base.h" |
| #include "card_ddcb.h" |
| |
| static int genwqe_open_files(struct genwqe_dev *cd) |
| { |
| int rc; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&cd->file_lock, flags); |
| rc = list_empty(&cd->file_list); |
| spin_unlock_irqrestore(&cd->file_lock, flags); |
| return !rc; |
| } |
| |
| static void genwqe_add_file(struct genwqe_dev *cd, struct genwqe_file *cfile) |
| { |
| unsigned long flags; |
| |
| cfile->opener = get_pid(task_tgid(current)); |
| spin_lock_irqsave(&cd->file_lock, flags); |
| list_add(&cfile->list, &cd->file_list); |
| spin_unlock_irqrestore(&cd->file_lock, flags); |
| } |
| |
| static int genwqe_del_file(struct genwqe_dev *cd, struct genwqe_file *cfile) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&cd->file_lock, flags); |
| list_del(&cfile->list); |
| spin_unlock_irqrestore(&cd->file_lock, flags); |
| put_pid(cfile->opener); |
| |
| return 0; |
| } |
| |
| static void genwqe_add_pin(struct genwqe_file *cfile, struct dma_mapping *m) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&cfile->pin_lock, flags); |
| list_add(&m->pin_list, &cfile->pin_list); |
| spin_unlock_irqrestore(&cfile->pin_lock, flags); |
| } |
| |
| static int genwqe_del_pin(struct genwqe_file *cfile, struct dma_mapping *m) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&cfile->pin_lock, flags); |
| list_del(&m->pin_list); |
| spin_unlock_irqrestore(&cfile->pin_lock, flags); |
| |
| return 0; |
| } |
| |
| /** |
| * genwqe_search_pin() - Search for the mapping for a userspace address |
| * @cfile: Descriptor of opened file |
| * @u_addr: User virtual address |
| * @size: Size of buffer |
| * @virt_addr: Virtual address to be updated |
| * |
| * Return: Pointer to the corresponding mapping NULL if not found |
| */ |
| static struct dma_mapping *genwqe_search_pin(struct genwqe_file *cfile, |
| unsigned long u_addr, |
| unsigned int size, |
| void **virt_addr) |
| { |
| unsigned long flags; |
| struct dma_mapping *m; |
| |
| spin_lock_irqsave(&cfile->pin_lock, flags); |
| |
| list_for_each_entry(m, &cfile->pin_list, pin_list) { |
| if ((((u64)m->u_vaddr) <= (u_addr)) && |
| (((u64)m->u_vaddr + m->size) >= (u_addr + size))) { |
| |
| if (virt_addr) |
| *virt_addr = m->k_vaddr + |
| (u_addr - (u64)m->u_vaddr); |
| |
| spin_unlock_irqrestore(&cfile->pin_lock, flags); |
| return m; |
| } |
| } |
| spin_unlock_irqrestore(&cfile->pin_lock, flags); |
| return NULL; |
| } |
| |
| static void __genwqe_add_mapping(struct genwqe_file *cfile, |
| struct dma_mapping *dma_map) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&cfile->map_lock, flags); |
| list_add(&dma_map->card_list, &cfile->map_list); |
| spin_unlock_irqrestore(&cfile->map_lock, flags); |
| } |
| |
| static void __genwqe_del_mapping(struct genwqe_file *cfile, |
| struct dma_mapping *dma_map) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&cfile->map_lock, flags); |
| list_del(&dma_map->card_list); |
| spin_unlock_irqrestore(&cfile->map_lock, flags); |
| } |
| |
| |
| /** |
| * __genwqe_search_mapping() - Search for the mapping for a userspace address |
| * @cfile: descriptor of opened file |
| * @u_addr: user virtual address |
| * @size: size of buffer |
| * @dma_addr: DMA address to be updated |
| * @virt_addr: Virtual address to be updated |
| * Return: Pointer to the corresponding mapping NULL if not found |
| */ |
| static struct dma_mapping *__genwqe_search_mapping(struct genwqe_file *cfile, |
| unsigned long u_addr, |
| unsigned int size, |
| dma_addr_t *dma_addr, |
| void **virt_addr) |
| { |
| unsigned long flags; |
| struct dma_mapping *m; |
| struct pci_dev *pci_dev = cfile->cd->pci_dev; |
| |
| spin_lock_irqsave(&cfile->map_lock, flags); |
| list_for_each_entry(m, &cfile->map_list, card_list) { |
| |
| if ((((u64)m->u_vaddr) <= (u_addr)) && |
| (((u64)m->u_vaddr + m->size) >= (u_addr + size))) { |
| |
| /* match found: current is as expected and |
| addr is in range */ |
| if (dma_addr) |
| *dma_addr = m->dma_addr + |
| (u_addr - (u64)m->u_vaddr); |
| |
| if (virt_addr) |
| *virt_addr = m->k_vaddr + |
| (u_addr - (u64)m->u_vaddr); |
| |
| spin_unlock_irqrestore(&cfile->map_lock, flags); |
| return m; |
| } |
| } |
| spin_unlock_irqrestore(&cfile->map_lock, flags); |
| |
| dev_err(&pci_dev->dev, |
| "[%s] Entry not found: u_addr=%lx, size=%x\n", |
| __func__, u_addr, size); |
| |
| return NULL; |
| } |
| |
| static void genwqe_remove_mappings(struct genwqe_file *cfile) |
| { |
| int i = 0; |
| struct list_head *node, *next; |
| struct dma_mapping *dma_map; |
| struct genwqe_dev *cd = cfile->cd; |
| struct pci_dev *pci_dev = cfile->cd->pci_dev; |
| |
| list_for_each_safe(node, next, &cfile->map_list) { |
| dma_map = list_entry(node, struct dma_mapping, card_list); |
| |
| list_del_init(&dma_map->card_list); |
| |
| /* |
| * This is really a bug, because those things should |
| * have been already tidied up. |
| * |
| * GENWQE_MAPPING_RAW should have been removed via mmunmap(). |
| * GENWQE_MAPPING_SGL_TEMP should be removed by tidy up code. |
| */ |
| dev_err(&pci_dev->dev, |
| "[%s] %d. cleanup mapping: u_vaddr=%p u_kaddr=%016lx dma_addr=%lx\n", |
| __func__, i++, dma_map->u_vaddr, |
| (unsigned long)dma_map->k_vaddr, |
| (unsigned long)dma_map->dma_addr); |
| |
| if (dma_map->type == GENWQE_MAPPING_RAW) { |
| /* we allocated this dynamically */ |
| __genwqe_free_consistent(cd, dma_map->size, |
| dma_map->k_vaddr, |
| dma_map->dma_addr); |
| kfree(dma_map); |
| } else if (dma_map->type == GENWQE_MAPPING_SGL_TEMP) { |
| /* we use dma_map statically from the request */ |
| genwqe_user_vunmap(cd, dma_map); |
| } |
| } |
| } |
| |
| static void genwqe_remove_pinnings(struct genwqe_file *cfile) |
| { |
| struct list_head *node, *next; |
| struct dma_mapping *dma_map; |
| struct genwqe_dev *cd = cfile->cd; |
| |
| list_for_each_safe(node, next, &cfile->pin_list) { |
| dma_map = list_entry(node, struct dma_mapping, pin_list); |
| |
| /* |
| * This is not a bug, because a killed processed might |
| * not call the unpin ioctl, which is supposed to free |
| * the resources. |
| * |
| * Pinnings are dymically allocated and need to be |
| * deleted. |
| */ |
| list_del_init(&dma_map->pin_list); |
| genwqe_user_vunmap(cd, dma_map); |
| kfree(dma_map); |
| } |
| } |
| |
| /** |
| * genwqe_kill_fasync() - Send signal to all processes with open GenWQE files |
| * @cd: GenWQE device information |
| * @sig: Signal to send out |
| * |
| * E.g. genwqe_send_signal(cd, SIGIO); |
| */ |
| static int genwqe_kill_fasync(struct genwqe_dev *cd, int sig) |
| { |
| unsigned int files = 0; |
| unsigned long flags; |
| struct genwqe_file *cfile; |
| |
| spin_lock_irqsave(&cd->file_lock, flags); |
| list_for_each_entry(cfile, &cd->file_list, list) { |
| if (cfile->async_queue) |
| kill_fasync(&cfile->async_queue, sig, POLL_HUP); |
| files++; |
| } |
| spin_unlock_irqrestore(&cd->file_lock, flags); |
| return files; |
| } |
| |
| static int genwqe_terminate(struct genwqe_dev *cd) |
| { |
| unsigned int files = 0; |
| unsigned long flags; |
| struct genwqe_file *cfile; |
| |
| spin_lock_irqsave(&cd->file_lock, flags); |
| list_for_each_entry(cfile, &cd->file_list, list) { |
| kill_pid(cfile->opener, SIGKILL, 1); |
| files++; |
| } |
| spin_unlock_irqrestore(&cd->file_lock, flags); |
| return files; |
| } |
| |
| /** |
| * genwqe_open() - file open |
| * @inode: file system information |
| * @filp: file handle |
| * |
| * This function is executed whenever an application calls |
| * open("/dev/genwqe",..). |
| * |
| * Return: 0 if successful or <0 if errors |
| */ |
| static int genwqe_open(struct inode *inode, struct file *filp) |
| { |
| struct genwqe_dev *cd; |
| struct genwqe_file *cfile; |
| |
| cfile = kzalloc(sizeof(*cfile), GFP_KERNEL); |
| if (cfile == NULL) |
| return -ENOMEM; |
| |
| cd = container_of(inode->i_cdev, struct genwqe_dev, cdev_genwqe); |
| cfile->cd = cd; |
| cfile->filp = filp; |
| cfile->client = NULL; |
| |
| spin_lock_init(&cfile->map_lock); /* list of raw memory allocations */ |
| INIT_LIST_HEAD(&cfile->map_list); |
| |
| spin_lock_init(&cfile->pin_lock); /* list of user pinned memory */ |
| INIT_LIST_HEAD(&cfile->pin_list); |
| |
| filp->private_data = cfile; |
| |
| genwqe_add_file(cd, cfile); |
| return 0; |
| } |
| |
| /** |
| * genwqe_fasync() - Setup process to receive SIGIO. |
| * @fd: file descriptor |
| * @filp: file handle |
| * @mode: file mode |
| * |
| * Sending a signal is working as following: |
| * |
| * if (cdev->async_queue) |
| * kill_fasync(&cdev->async_queue, SIGIO, POLL_IN); |
| * |
| * Some devices also implement asynchronous notification to indicate |
| * when the device can be written; in this case, of course, |
| * kill_fasync must be called with a mode of POLL_OUT. |
| */ |
| static int genwqe_fasync(int fd, struct file *filp, int mode) |
| { |
| struct genwqe_file *cdev = (struct genwqe_file *)filp->private_data; |
| |
| return fasync_helper(fd, filp, mode, &cdev->async_queue); |
| } |
| |
| |
| /** |
| * genwqe_release() - file close |
| * @inode: file system information |
| * @filp: file handle |
| * |
| * This function is executed whenever an application calls 'close(fd_genwqe)' |
| * |
| * Return: always 0 |
| */ |
| static int genwqe_release(struct inode *inode, struct file *filp) |
| { |
| struct genwqe_file *cfile = (struct genwqe_file *)filp->private_data; |
| struct genwqe_dev *cd = cfile->cd; |
| |
| /* there must be no entries in these lists! */ |
| genwqe_remove_mappings(cfile); |
| genwqe_remove_pinnings(cfile); |
| |
| /* remove this filp from the asynchronously notified filp's */ |
| genwqe_fasync(-1, filp, 0); |
| |
| /* |
| * For this to work we must not release cd when this cfile is |
| * not yet released, otherwise the list entry is invalid, |
| * because the list itself gets reinstantiated! |
| */ |
| genwqe_del_file(cd, cfile); |
| kfree(cfile); |
| return 0; |
| } |
| |
| static void genwqe_vma_open(struct vm_area_struct *vma) |
| { |
| /* nothing ... */ |
| } |
| |
| /** |
| * genwqe_vma_close() - Called each time when vma is unmapped |
| * @vma: VMA area to close |
| * |
| * Free memory which got allocated by GenWQE mmap(). |
| */ |
| static void genwqe_vma_close(struct vm_area_struct *vma) |
| { |
| unsigned long vsize = vma->vm_end - vma->vm_start; |
| struct inode *inode = file_inode(vma->vm_file); |
| struct dma_mapping *dma_map; |
| struct genwqe_dev *cd = container_of(inode->i_cdev, struct genwqe_dev, |
| cdev_genwqe); |
| struct pci_dev *pci_dev = cd->pci_dev; |
| dma_addr_t d_addr = 0; |
| struct genwqe_file *cfile = vma->vm_private_data; |
| |
| dma_map = __genwqe_search_mapping(cfile, vma->vm_start, vsize, |
| &d_addr, NULL); |
| if (dma_map == NULL) { |
| dev_err(&pci_dev->dev, |
| " [%s] err: mapping not found: v=%lx, p=%lx s=%lx\n", |
| __func__, vma->vm_start, vma->vm_pgoff << PAGE_SHIFT, |
| vsize); |
| return; |
| } |
| __genwqe_del_mapping(cfile, dma_map); |
| __genwqe_free_consistent(cd, dma_map->size, dma_map->k_vaddr, |
| dma_map->dma_addr); |
| kfree(dma_map); |
| } |
| |
| static const struct vm_operations_struct genwqe_vma_ops = { |
| .open = genwqe_vma_open, |
| .close = genwqe_vma_close, |
| }; |
| |
| /** |
| * genwqe_mmap() - Provide contignous buffers to userspace |
| * @filp: File pointer (unused) |
| * @vma: VMA area to map |
| * |
| * We use mmap() to allocate contignous buffers used for DMA |
| * transfers. After the buffer is allocated we remap it to user-space |
| * and remember a reference to our dma_mapping data structure, where |
| * we store the associated DMA address and allocated size. |
| * |
| * When we receive a DDCB execution request with the ATS bits set to |
| * plain buffer, we lookup our dma_mapping list to find the |
| * corresponding DMA address for the associated user-space address. |
| */ |
| static int genwqe_mmap(struct file *filp, struct vm_area_struct *vma) |
| { |
| int rc; |
| unsigned long pfn, vsize = vma->vm_end - vma->vm_start; |
| struct genwqe_file *cfile = (struct genwqe_file *)filp->private_data; |
| struct genwqe_dev *cd = cfile->cd; |
| struct dma_mapping *dma_map; |
| |
| if (vsize == 0) |
| return -EINVAL; |
| |
| if (get_order(vsize) > MAX_PAGE_ORDER) |
| return -ENOMEM; |
| |
| dma_map = kzalloc(sizeof(struct dma_mapping), GFP_KERNEL); |
| if (dma_map == NULL) |
| return -ENOMEM; |
| |
| genwqe_mapping_init(dma_map, GENWQE_MAPPING_RAW); |
| dma_map->u_vaddr = (void *)vma->vm_start; |
| dma_map->size = vsize; |
| dma_map->nr_pages = DIV_ROUND_UP(vsize, PAGE_SIZE); |
| dma_map->k_vaddr = __genwqe_alloc_consistent(cd, vsize, |
| &dma_map->dma_addr); |
| if (dma_map->k_vaddr == NULL) { |
| rc = -ENOMEM; |
| goto free_dma_map; |
| } |
| |
| if (capable(CAP_SYS_ADMIN) && (vsize > sizeof(dma_addr_t))) |
| *(dma_addr_t *)dma_map->k_vaddr = dma_map->dma_addr; |
| |
| pfn = virt_to_phys(dma_map->k_vaddr) >> PAGE_SHIFT; |
| rc = remap_pfn_range(vma, |
| vma->vm_start, |
| pfn, |
| vsize, |
| vma->vm_page_prot); |
| if (rc != 0) { |
| rc = -EFAULT; |
| goto free_dma_mem; |
| } |
| |
| vma->vm_private_data = cfile; |
| vma->vm_ops = &genwqe_vma_ops; |
| __genwqe_add_mapping(cfile, dma_map); |
| |
| return 0; |
| |
| free_dma_mem: |
| __genwqe_free_consistent(cd, dma_map->size, |
| dma_map->k_vaddr, |
| dma_map->dma_addr); |
| free_dma_map: |
| kfree(dma_map); |
| return rc; |
| } |
| |
| #define FLASH_BLOCK 0x40000 /* we use 256k blocks */ |
| |
| /** |
| * do_flash_update() - Excute flash update (write image or CVPD) |
| * @cfile: Descriptor of opened file |
| * @load: details about image load |
| * |
| * Return: 0 if successful |
| */ |
| static int do_flash_update(struct genwqe_file *cfile, |
| struct genwqe_bitstream *load) |
| { |
| int rc = 0; |
| int blocks_to_flash; |
| dma_addr_t dma_addr; |
| u64 flash = 0; |
| size_t tocopy = 0; |
| u8 __user *buf; |
| u8 *xbuf; |
| u32 crc; |
| u8 cmdopts; |
| struct genwqe_dev *cd = cfile->cd; |
| struct file *filp = cfile->filp; |
| struct pci_dev *pci_dev = cd->pci_dev; |
| |
| if ((load->size & 0x3) != 0) |
| return -EINVAL; |
| |
| if (((unsigned long)(load->data_addr) & ~PAGE_MASK) != 0) |
| return -EINVAL; |
| |
| /* FIXME Bits have changed for new service layer! */ |
| switch ((char)load->partition) { |
| case '0': |
| cmdopts = 0x14; |
| break; /* download/erase_first/part_0 */ |
| case '1': |
| cmdopts = 0x1C; |
| break; /* download/erase_first/part_1 */ |
| case 'v': |
| cmdopts = 0x0C; |
| break; /* download/erase_first/vpd */ |
| default: |
| return -EINVAL; |
| } |
| |
| buf = (u8 __user *)load->data_addr; |
| xbuf = __genwqe_alloc_consistent(cd, FLASH_BLOCK, &dma_addr); |
| if (xbuf == NULL) |
| return -ENOMEM; |
| |
| blocks_to_flash = load->size / FLASH_BLOCK; |
| while (load->size) { |
| struct genwqe_ddcb_cmd *req; |
| |
| /* |
| * We must be 4 byte aligned. Buffer must be 0 appened |
| * to have defined values when calculating CRC. |
| */ |
| tocopy = min_t(size_t, load->size, FLASH_BLOCK); |
| |
| rc = copy_from_user(xbuf, buf, tocopy); |
| if (rc) { |
| rc = -EFAULT; |
| goto free_buffer; |
| } |
| crc = genwqe_crc32(xbuf, tocopy, 0xffffffff); |
| |
| dev_dbg(&pci_dev->dev, |
| "[%s] DMA: %lx CRC: %08x SZ: %ld %d\n", |
| __func__, (unsigned long)dma_addr, crc, tocopy, |
| blocks_to_flash); |
| |
| /* prepare DDCB for SLU process */ |
| req = ddcb_requ_alloc(); |
| if (req == NULL) { |
| rc = -ENOMEM; |
| goto free_buffer; |
| } |
| |
| req->cmd = SLCMD_MOVE_FLASH; |
| req->cmdopts = cmdopts; |
| |
| /* prepare invariant values */ |
| if (genwqe_get_slu_id(cd) <= 0x2) { |
| *(__be64 *)&req->__asiv[0] = cpu_to_be64(dma_addr); |
| *(__be64 *)&req->__asiv[8] = cpu_to_be64(tocopy); |
| *(__be64 *)&req->__asiv[16] = cpu_to_be64(flash); |
| *(__be32 *)&req->__asiv[24] = cpu_to_be32(0); |
| req->__asiv[24] = load->uid; |
| *(__be32 *)&req->__asiv[28] = cpu_to_be32(crc); |
| |
| /* for simulation only */ |
| *(__be64 *)&req->__asiv[88] = cpu_to_be64(load->slu_id); |
| *(__be64 *)&req->__asiv[96] = cpu_to_be64(load->app_id); |
| req->asiv_length = 32; /* bytes included in crc calc */ |
| } else { /* setup DDCB for ATS architecture */ |
| *(__be64 *)&req->asiv[0] = cpu_to_be64(dma_addr); |
| *(__be32 *)&req->asiv[8] = cpu_to_be32(tocopy); |
| *(__be32 *)&req->asiv[12] = cpu_to_be32(0); /* resvd */ |
| *(__be64 *)&req->asiv[16] = cpu_to_be64(flash); |
| *(__be32 *)&req->asiv[24] = cpu_to_be32(load->uid<<24); |
| *(__be32 *)&req->asiv[28] = cpu_to_be32(crc); |
| |
| /* for simulation only */ |
| *(__be64 *)&req->asiv[80] = cpu_to_be64(load->slu_id); |
| *(__be64 *)&req->asiv[88] = cpu_to_be64(load->app_id); |
| |
| /* Rd only */ |
| req->ats = 0x4ULL << 44; |
| req->asiv_length = 40; /* bytes included in crc calc */ |
| } |
| req->asv_length = 8; |
| |
| /* For Genwqe5 we get back the calculated CRC */ |
| *(u64 *)&req->asv[0] = 0ULL; /* 0x80 */ |
| |
| rc = __genwqe_execute_raw_ddcb(cd, req, filp->f_flags); |
| |
| load->retc = req->retc; |
| load->attn = req->attn; |
| load->progress = req->progress; |
| |
| if (rc < 0) { |
| ddcb_requ_free(req); |
| goto free_buffer; |
| } |
| |
| if (req->retc != DDCB_RETC_COMPLETE) { |
| rc = -EIO; |
| ddcb_requ_free(req); |
| goto free_buffer; |
| } |
| |
| load->size -= tocopy; |
| flash += tocopy; |
| buf += tocopy; |
| blocks_to_flash--; |
| ddcb_requ_free(req); |
| } |
| |
| free_buffer: |
| __genwqe_free_consistent(cd, FLASH_BLOCK, xbuf, dma_addr); |
| return rc; |
| } |
| |
| static int do_flash_read(struct genwqe_file *cfile, |
| struct genwqe_bitstream *load) |
| { |
| int rc, blocks_to_flash; |
| dma_addr_t dma_addr; |
| u64 flash = 0; |
| size_t tocopy = 0; |
| u8 __user *buf; |
| u8 *xbuf; |
| u8 cmdopts; |
| struct genwqe_dev *cd = cfile->cd; |
| struct file *filp = cfile->filp; |
| struct pci_dev *pci_dev = cd->pci_dev; |
| struct genwqe_ddcb_cmd *cmd; |
| |
| if ((load->size & 0x3) != 0) |
| return -EINVAL; |
| |
| if (((unsigned long)(load->data_addr) & ~PAGE_MASK) != 0) |
| return -EINVAL; |
| |
| /* FIXME Bits have changed for new service layer! */ |
| switch ((char)load->partition) { |
| case '0': |
| cmdopts = 0x12; |
| break; /* upload/part_0 */ |
| case '1': |
| cmdopts = 0x1A; |
| break; /* upload/part_1 */ |
| case 'v': |
| cmdopts = 0x0A; |
| break; /* upload/vpd */ |
| default: |
| return -EINVAL; |
| } |
| |
| buf = (u8 __user *)load->data_addr; |
| xbuf = __genwqe_alloc_consistent(cd, FLASH_BLOCK, &dma_addr); |
| if (xbuf == NULL) |
| return -ENOMEM; |
| |
| blocks_to_flash = load->size / FLASH_BLOCK; |
| while (load->size) { |
| /* |
| * We must be 4 byte aligned. Buffer must be 0 appened |
| * to have defined values when calculating CRC. |
| */ |
| tocopy = min_t(size_t, load->size, FLASH_BLOCK); |
| |
| dev_dbg(&pci_dev->dev, |
| "[%s] DMA: %lx SZ: %ld %d\n", |
| __func__, (unsigned long)dma_addr, tocopy, |
| blocks_to_flash); |
| |
| /* prepare DDCB for SLU process */ |
| cmd = ddcb_requ_alloc(); |
| if (cmd == NULL) { |
| rc = -ENOMEM; |
| goto free_buffer; |
| } |
| cmd->cmd = SLCMD_MOVE_FLASH; |
| cmd->cmdopts = cmdopts; |
| |
| /* prepare invariant values */ |
| if (genwqe_get_slu_id(cd) <= 0x2) { |
| *(__be64 *)&cmd->__asiv[0] = cpu_to_be64(dma_addr); |
| *(__be64 *)&cmd->__asiv[8] = cpu_to_be64(tocopy); |
| *(__be64 *)&cmd->__asiv[16] = cpu_to_be64(flash); |
| *(__be32 *)&cmd->__asiv[24] = cpu_to_be32(0); |
| cmd->__asiv[24] = load->uid; |
| *(__be32 *)&cmd->__asiv[28] = cpu_to_be32(0) /* CRC */; |
| cmd->asiv_length = 32; /* bytes included in crc calc */ |
| } else { /* setup DDCB for ATS architecture */ |
| *(__be64 *)&cmd->asiv[0] = cpu_to_be64(dma_addr); |
| *(__be32 *)&cmd->asiv[8] = cpu_to_be32(tocopy); |
| *(__be32 *)&cmd->asiv[12] = cpu_to_be32(0); /* resvd */ |
| *(__be64 *)&cmd->asiv[16] = cpu_to_be64(flash); |
| *(__be32 *)&cmd->asiv[24] = cpu_to_be32(load->uid<<24); |
| *(__be32 *)&cmd->asiv[28] = cpu_to_be32(0); /* CRC */ |
| |
| /* rd/wr */ |
| cmd->ats = 0x5ULL << 44; |
| cmd->asiv_length = 40; /* bytes included in crc calc */ |
| } |
| cmd->asv_length = 8; |
| |
| /* we only get back the calculated CRC */ |
| *(u64 *)&cmd->asv[0] = 0ULL; /* 0x80 */ |
| |
| rc = __genwqe_execute_raw_ddcb(cd, cmd, filp->f_flags); |
| |
| load->retc = cmd->retc; |
| load->attn = cmd->attn; |
| load->progress = cmd->progress; |
| |
| if ((rc < 0) && (rc != -EBADMSG)) { |
| ddcb_requ_free(cmd); |
| goto free_buffer; |
| } |
| |
| rc = copy_to_user(buf, xbuf, tocopy); |
| if (rc) { |
| rc = -EFAULT; |
| ddcb_requ_free(cmd); |
| goto free_buffer; |
| } |
| |
| /* We know that we can get retc 0x104 with CRC err */ |
| if (((cmd->retc == DDCB_RETC_FAULT) && |
| (cmd->attn != 0x02)) || /* Normally ignore CRC error */ |
| ((cmd->retc == DDCB_RETC_COMPLETE) && |
| (cmd->attn != 0x00))) { /* Everything was fine */ |
| rc = -EIO; |
| ddcb_requ_free(cmd); |
| goto free_buffer; |
| } |
| |
| load->size -= tocopy; |
| flash += tocopy; |
| buf += tocopy; |
| blocks_to_flash--; |
| ddcb_requ_free(cmd); |
| } |
| rc = 0; |
| |
| free_buffer: |
| __genwqe_free_consistent(cd, FLASH_BLOCK, xbuf, dma_addr); |
| return rc; |
| } |
| |
| static int genwqe_pin_mem(struct genwqe_file *cfile, struct genwqe_mem *m) |
| { |
| int rc; |
| struct genwqe_dev *cd = cfile->cd; |
| struct pci_dev *pci_dev = cfile->cd->pci_dev; |
| struct dma_mapping *dma_map; |
| unsigned long map_addr; |
| unsigned long map_size; |
| |
| if ((m->addr == 0x0) || (m->size == 0)) |
| return -EINVAL; |
| if (m->size > ULONG_MAX - PAGE_SIZE - (m->addr & ~PAGE_MASK)) |
| return -EINVAL; |
| |
| map_addr = (m->addr & PAGE_MASK); |
| map_size = round_up(m->size + (m->addr & ~PAGE_MASK), PAGE_SIZE); |
| |
| dma_map = kzalloc(sizeof(struct dma_mapping), GFP_KERNEL); |
| if (dma_map == NULL) |
| return -ENOMEM; |
| |
| genwqe_mapping_init(dma_map, GENWQE_MAPPING_SGL_PINNED); |
| rc = genwqe_user_vmap(cd, dma_map, (void *)map_addr, map_size); |
| if (rc != 0) { |
| dev_err(&pci_dev->dev, |
| "[%s] genwqe_user_vmap rc=%d\n", __func__, rc); |
| kfree(dma_map); |
| return rc; |
| } |
| |
| genwqe_add_pin(cfile, dma_map); |
| return 0; |
| } |
| |
| static int genwqe_unpin_mem(struct genwqe_file *cfile, struct genwqe_mem *m) |
| { |
| struct genwqe_dev *cd = cfile->cd; |
| struct dma_mapping *dma_map; |
| unsigned long map_addr; |
| unsigned long map_size; |
| |
| if (m->addr == 0x0) |
| return -EINVAL; |
| |
| map_addr = (m->addr & PAGE_MASK); |
| map_size = round_up(m->size + (m->addr & ~PAGE_MASK), PAGE_SIZE); |
| |
| dma_map = genwqe_search_pin(cfile, map_addr, map_size, NULL); |
| if (dma_map == NULL) |
| return -ENOENT; |
| |
| genwqe_del_pin(cfile, dma_map); |
| genwqe_user_vunmap(cd, dma_map); |
| kfree(dma_map); |
| return 0; |
| } |
| |
| /** |
| * ddcb_cmd_cleanup() - Remove dynamically created fixup entries |
| * @cfile: Descriptor of opened file |
| * @req: DDCB work request |
| * |
| * Only if there are any. Pinnings are not removed. |
| */ |
| static int ddcb_cmd_cleanup(struct genwqe_file *cfile, struct ddcb_requ *req) |
| { |
| unsigned int i; |
| struct dma_mapping *dma_map; |
| struct genwqe_dev *cd = cfile->cd; |
| |
| for (i = 0; i < DDCB_FIXUPS; i++) { |
| dma_map = &req->dma_mappings[i]; |
| |
| if (dma_mapping_used(dma_map)) { |
| __genwqe_del_mapping(cfile, dma_map); |
| genwqe_user_vunmap(cd, dma_map); |
| } |
| if (req->sgls[i].sgl != NULL) |
| genwqe_free_sync_sgl(cd, &req->sgls[i]); |
| } |
| return 0; |
| } |
| |
| /** |
| * ddcb_cmd_fixups() - Establish DMA fixups/sglists for user memory references |
| * @cfile: Descriptor of opened file |
| * @req: DDCB work request |
| * |
| * Before the DDCB gets executed we need to handle the fixups. We |
| * replace the user-space addresses with DMA addresses or do |
| * additional setup work e.g. generating a scatter-gather list which |
| * is used to describe the memory referred to in the fixup. |
| */ |
| static int ddcb_cmd_fixups(struct genwqe_file *cfile, struct ddcb_requ *req) |
| { |
| int rc; |
| unsigned int asiv_offs, i; |
| struct genwqe_dev *cd = cfile->cd; |
| struct genwqe_ddcb_cmd *cmd = &req->cmd; |
| struct dma_mapping *m; |
| |
| for (i = 0, asiv_offs = 0x00; asiv_offs <= 0x58; |
| i++, asiv_offs += 0x08) { |
| |
| u64 u_addr; |
| dma_addr_t d_addr; |
| u32 u_size = 0; |
| u64 ats_flags; |
| |
| ats_flags = ATS_GET_FLAGS(cmd->ats, asiv_offs); |
| |
| switch (ats_flags) { |
| |
| case ATS_TYPE_DATA: |
| break; /* nothing to do here */ |
| |
| case ATS_TYPE_FLAT_RDWR: |
| case ATS_TYPE_FLAT_RD: { |
| u_addr = be64_to_cpu(*((__be64 *)&cmd-> |
| asiv[asiv_offs])); |
| u_size = be32_to_cpu(*((__be32 *)&cmd-> |
| asiv[asiv_offs + 0x08])); |
| |
| /* |
| * No data available. Ignore u_addr in this |
| * case and set addr to 0. Hardware must not |
| * fetch the buffer. |
| */ |
| if (u_size == 0x0) { |
| *((__be64 *)&cmd->asiv[asiv_offs]) = |
| cpu_to_be64(0x0); |
| break; |
| } |
| |
| m = __genwqe_search_mapping(cfile, u_addr, u_size, |
| &d_addr, NULL); |
| if (m == NULL) { |
| rc = -EFAULT; |
| goto err_out; |
| } |
| |
| *((__be64 *)&cmd->asiv[asiv_offs]) = |
| cpu_to_be64(d_addr); |
| break; |
| } |
| |
| case ATS_TYPE_SGL_RDWR: |
| case ATS_TYPE_SGL_RD: { |
| int page_offs; |
| |
| u_addr = be64_to_cpu(*((__be64 *) |
| &cmd->asiv[asiv_offs])); |
| u_size = be32_to_cpu(*((__be32 *) |
| &cmd->asiv[asiv_offs + 0x08])); |
| |
| /* |
| * No data available. Ignore u_addr in this |
| * case and set addr to 0. Hardware must not |
| * fetch the empty sgl. |
| */ |
| if (u_size == 0x0) { |
| *((__be64 *)&cmd->asiv[asiv_offs]) = |
| cpu_to_be64(0x0); |
| break; |
| } |
| |
| m = genwqe_search_pin(cfile, u_addr, u_size, NULL); |
| if (m != NULL) { |
| page_offs = (u_addr - |
| (u64)m->u_vaddr)/PAGE_SIZE; |
| } else { |
| m = &req->dma_mappings[i]; |
| |
| genwqe_mapping_init(m, |
| GENWQE_MAPPING_SGL_TEMP); |
| |
| if (ats_flags == ATS_TYPE_SGL_RD) |
| m->write = 0; |
| |
| rc = genwqe_user_vmap(cd, m, (void *)u_addr, |
| u_size); |
| if (rc != 0) |
| goto err_out; |
| |
| __genwqe_add_mapping(cfile, m); |
| page_offs = 0; |
| } |
| |
| /* create genwqe style scatter gather list */ |
| rc = genwqe_alloc_sync_sgl(cd, &req->sgls[i], |
| (void __user *)u_addr, |
| u_size, m->write); |
| if (rc != 0) |
| goto err_out; |
| |
| genwqe_setup_sgl(cd, &req->sgls[i], |
| &m->dma_list[page_offs]); |
| |
| *((__be64 *)&cmd->asiv[asiv_offs]) = |
| cpu_to_be64(req->sgls[i].sgl_dma_addr); |
| |
| break; |
| } |
| default: |
| rc = -EINVAL; |
| goto err_out; |
| } |
| } |
| return 0; |
| |
| err_out: |
| ddcb_cmd_cleanup(cfile, req); |
| return rc; |
| } |
| |
| /** |
| * genwqe_execute_ddcb() - Execute DDCB using userspace address fixups |
| * @cfile: Descriptor of opened file |
| * @cmd: Command identifier (passed from user) |
| * |
| * The code will build up the translation tables or lookup the |
| * contignous memory allocation table to find the right translations |
| * and DMA addresses. |
| */ |
| static int genwqe_execute_ddcb(struct genwqe_file *cfile, |
| struct genwqe_ddcb_cmd *cmd) |
| { |
| int rc; |
| struct genwqe_dev *cd = cfile->cd; |
| struct file *filp = cfile->filp; |
| struct ddcb_requ *req = container_of(cmd, struct ddcb_requ, cmd); |
| |
| rc = ddcb_cmd_fixups(cfile, req); |
| if (rc != 0) |
| return rc; |
| |
| rc = __genwqe_execute_raw_ddcb(cd, cmd, filp->f_flags); |
| ddcb_cmd_cleanup(cfile, req); |
| return rc; |
| } |
| |
| static int do_execute_ddcb(struct genwqe_file *cfile, |
| unsigned long arg, int raw) |
| { |
| int rc; |
| struct genwqe_ddcb_cmd *cmd; |
| struct genwqe_dev *cd = cfile->cd; |
| struct file *filp = cfile->filp; |
| |
| cmd = ddcb_requ_alloc(); |
| if (cmd == NULL) |
| return -ENOMEM; |
| |
| if (copy_from_user(cmd, (void __user *)arg, sizeof(*cmd))) { |
| ddcb_requ_free(cmd); |
| return -EFAULT; |
| } |
| |
| if (!raw) |
| rc = genwqe_execute_ddcb(cfile, cmd); |
| else |
| rc = __genwqe_execute_raw_ddcb(cd, cmd, filp->f_flags); |
| |
| /* Copy back only the modifed fields. Do not copy ASIV |
| back since the copy got modified by the driver. */ |
| if (copy_to_user((void __user *)arg, cmd, |
| sizeof(*cmd) - DDCB_ASIV_LENGTH)) { |
| ddcb_requ_free(cmd); |
| return -EFAULT; |
| } |
| |
| ddcb_requ_free(cmd); |
| return rc; |
| } |
| |
| /** |
| * genwqe_ioctl() - IO control |
| * @filp: file handle |
| * @cmd: command identifier (passed from user) |
| * @arg: argument (passed from user) |
| * |
| * Return: 0 success |
| */ |
| static long genwqe_ioctl(struct file *filp, unsigned int cmd, |
| unsigned long arg) |
| { |
| int rc = 0; |
| struct genwqe_file *cfile = (struct genwqe_file *)filp->private_data; |
| struct genwqe_dev *cd = cfile->cd; |
| struct pci_dev *pci_dev = cd->pci_dev; |
| struct genwqe_reg_io __user *io; |
| u64 val; |
| u32 reg_offs; |
| |
| /* Return -EIO if card hit EEH */ |
| if (pci_channel_offline(pci_dev)) |
| return -EIO; |
| |
| if (_IOC_TYPE(cmd) != GENWQE_IOC_CODE) |
| return -EINVAL; |
| |
| switch (cmd) { |
| |
| case GENWQE_GET_CARD_STATE: |
| put_user(cd->card_state, (enum genwqe_card_state __user *)arg); |
| return 0; |
| |
| /* Register access */ |
| case GENWQE_READ_REG64: { |
| io = (struct genwqe_reg_io __user *)arg; |
| |
| if (get_user(reg_offs, &io->num)) |
| return -EFAULT; |
| |
| if ((reg_offs >= cd->mmio_len) || (reg_offs & 0x7)) |
| return -EINVAL; |
| |
| val = __genwqe_readq(cd, reg_offs); |
| put_user(val, &io->val64); |
| return 0; |
| } |
| |
| case GENWQE_WRITE_REG64: { |
| io = (struct genwqe_reg_io __user *)arg; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| |
| if ((filp->f_flags & O_ACCMODE) == O_RDONLY) |
| return -EPERM; |
| |
| if (get_user(reg_offs, &io->num)) |
| return -EFAULT; |
| |
| if ((reg_offs >= cd->mmio_len) || (reg_offs & 0x7)) |
| return -EINVAL; |
| |
| if (get_user(val, &io->val64)) |
| return -EFAULT; |
| |
| __genwqe_writeq(cd, reg_offs, val); |
| return 0; |
| } |
| |
| case GENWQE_READ_REG32: { |
| io = (struct genwqe_reg_io __user *)arg; |
| |
| if (get_user(reg_offs, &io->num)) |
| return -EFAULT; |
| |
| if ((reg_offs >= cd->mmio_len) || (reg_offs & 0x3)) |
| return -EINVAL; |
| |
| val = __genwqe_readl(cd, reg_offs); |
| put_user(val, &io->val64); |
| return 0; |
| } |
| |
| case GENWQE_WRITE_REG32: { |
| io = (struct genwqe_reg_io __user *)arg; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| |
| if ((filp->f_flags & O_ACCMODE) == O_RDONLY) |
| return -EPERM; |
| |
| if (get_user(reg_offs, &io->num)) |
| return -EFAULT; |
| |
| if ((reg_offs >= cd->mmio_len) || (reg_offs & 0x3)) |
| return -EINVAL; |
| |
| if (get_user(val, &io->val64)) |
| return -EFAULT; |
| |
| __genwqe_writel(cd, reg_offs, val); |
| return 0; |
| } |
| |
| /* Flash update/reading */ |
| case GENWQE_SLU_UPDATE: { |
| struct genwqe_bitstream load; |
| |
| if (!genwqe_is_privileged(cd)) |
| return -EPERM; |
| |
| if ((filp->f_flags & O_ACCMODE) == O_RDONLY) |
| return -EPERM; |
| |
| if (copy_from_user(&load, (void __user *)arg, |
| sizeof(load))) |
| return -EFAULT; |
| |
| rc = do_flash_update(cfile, &load); |
| |
| if (copy_to_user((void __user *)arg, &load, sizeof(load))) |
| return -EFAULT; |
| |
| return rc; |
| } |
| |
| case GENWQE_SLU_READ: { |
| struct genwqe_bitstream load; |
| |
| if (!genwqe_is_privileged(cd)) |
| return -EPERM; |
| |
| if (genwqe_flash_readback_fails(cd)) |
| return -ENOSPC; /* known to fail for old versions */ |
| |
| if (copy_from_user(&load, (void __user *)arg, sizeof(load))) |
| return -EFAULT; |
| |
| rc = do_flash_read(cfile, &load); |
| |
| if (copy_to_user((void __user *)arg, &load, sizeof(load))) |
| return -EFAULT; |
| |
| return rc; |
| } |
| |
| /* memory pinning and unpinning */ |
| case GENWQE_PIN_MEM: { |
| struct genwqe_mem m; |
| |
| if (copy_from_user(&m, (void __user *)arg, sizeof(m))) |
| return -EFAULT; |
| |
| return genwqe_pin_mem(cfile, &m); |
| } |
| |
| case GENWQE_UNPIN_MEM: { |
| struct genwqe_mem m; |
| |
| if (copy_from_user(&m, (void __user *)arg, sizeof(m))) |
| return -EFAULT; |
| |
| return genwqe_unpin_mem(cfile, &m); |
| } |
| |
| /* launch an DDCB and wait for completion */ |
| case GENWQE_EXECUTE_DDCB: |
| return do_execute_ddcb(cfile, arg, 0); |
| |
| case GENWQE_EXECUTE_RAW_DDCB: { |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| |
| return do_execute_ddcb(cfile, arg, 1); |
| } |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return rc; |
| } |
| |
| static const struct file_operations genwqe_fops = { |
| .owner = THIS_MODULE, |
| .open = genwqe_open, |
| .fasync = genwqe_fasync, |
| .mmap = genwqe_mmap, |
| .unlocked_ioctl = genwqe_ioctl, |
| .compat_ioctl = compat_ptr_ioctl, |
| .release = genwqe_release, |
| }; |
| |
| static int genwqe_device_initialized(struct genwqe_dev *cd) |
| { |
| return cd->dev != NULL; |
| } |
| |
| /** |
| * genwqe_device_create() - Create and configure genwqe char device |
| * @cd: genwqe device descriptor |
| * |
| * This function must be called before we create any more genwqe |
| * character devices, because it is allocating the major and minor |
| * number which are supposed to be used by the client drivers. |
| */ |
| int genwqe_device_create(struct genwqe_dev *cd) |
| { |
| int rc; |
| struct pci_dev *pci_dev = cd->pci_dev; |
| |
| /* |
| * Here starts the individual setup per client. It must |
| * initialize its own cdev data structure with its own fops. |
| * The appropriate devnum needs to be created. The ranges must |
| * not overlap. |
| */ |
| rc = alloc_chrdev_region(&cd->devnum_genwqe, 0, |
| GENWQE_MAX_MINOR, GENWQE_DEVNAME); |
| if (rc < 0) { |
| dev_err(&pci_dev->dev, "err: alloc_chrdev_region failed\n"); |
| goto err_dev; |
| } |
| |
| cdev_init(&cd->cdev_genwqe, &genwqe_fops); |
| cd->cdev_genwqe.owner = THIS_MODULE; |
| |
| rc = cdev_add(&cd->cdev_genwqe, cd->devnum_genwqe, 1); |
| if (rc < 0) { |
| dev_err(&pci_dev->dev, "err: cdev_add failed\n"); |
| goto err_add; |
| } |
| |
| /* |
| * Finally the device in /dev/... must be created. The rule is |
| * to use card%d_clientname for each created device. |
| */ |
| cd->dev = device_create_with_groups(cd->class_genwqe, |
| &cd->pci_dev->dev, |
| cd->devnum_genwqe, cd, |
| genwqe_attribute_groups, |
| GENWQE_DEVNAME "%u_card", |
| cd->card_idx); |
| if (IS_ERR(cd->dev)) { |
| rc = PTR_ERR(cd->dev); |
| goto err_cdev; |
| } |
| |
| genwqe_init_debugfs(cd); |
| |
| return 0; |
| |
| err_cdev: |
| cdev_del(&cd->cdev_genwqe); |
| err_add: |
| unregister_chrdev_region(cd->devnum_genwqe, GENWQE_MAX_MINOR); |
| err_dev: |
| cd->dev = NULL; |
| return rc; |
| } |
| |
| static int genwqe_inform_and_stop_processes(struct genwqe_dev *cd) |
| { |
| int rc; |
| unsigned int i; |
| struct pci_dev *pci_dev = cd->pci_dev; |
| |
| if (!genwqe_open_files(cd)) |
| return 0; |
| |
| dev_warn(&pci_dev->dev, "[%s] send SIGIO and wait ...\n", __func__); |
| |
| rc = genwqe_kill_fasync(cd, SIGIO); |
| if (rc > 0) { |
| /* give kill_timeout seconds to close file descriptors ... */ |
| for (i = 0; (i < GENWQE_KILL_TIMEOUT) && |
| genwqe_open_files(cd); i++) { |
| dev_info(&pci_dev->dev, " %d sec ...", i); |
| |
| cond_resched(); |
| msleep(1000); |
| } |
| |
| /* if no open files we can safely continue, else ... */ |
| if (!genwqe_open_files(cd)) |
| return 0; |
| |
| dev_warn(&pci_dev->dev, |
| "[%s] send SIGKILL and wait ...\n", __func__); |
| |
| rc = genwqe_terminate(cd); |
| if (rc) { |
| /* Give kill_timout more seconds to end processes */ |
| for (i = 0; (i < GENWQE_KILL_TIMEOUT) && |
| genwqe_open_files(cd); i++) { |
| dev_warn(&pci_dev->dev, " %d sec ...", i); |
| |
| cond_resched(); |
| msleep(1000); |
| } |
| } |
| } |
| return 0; |
| } |
| |
| /** |
| * genwqe_device_remove() - Remove genwqe's char device |
| * @cd: GenWQE device information |
| * |
| * This function must be called after the client devices are removed |
| * because it will free the major/minor number range for the genwqe |
| * drivers. |
| * |
| * This function must be robust enough to be called twice. |
| */ |
| int genwqe_device_remove(struct genwqe_dev *cd) |
| { |
| int rc; |
| struct pci_dev *pci_dev = cd->pci_dev; |
| |
| if (!genwqe_device_initialized(cd)) |
| return 1; |
| |
| genwqe_inform_and_stop_processes(cd); |
| |
| /* |
| * We currently do wait until all filedescriptors are |
| * closed. This leads to a problem when we abort the |
| * application which will decrease this reference from |
| * 1/unused to 0/illegal and not from 2/used 1/empty. |
| */ |
| rc = kref_read(&cd->cdev_genwqe.kobj.kref); |
| if (rc != 1) { |
| dev_err(&pci_dev->dev, |
| "[%s] err: cdev_genwqe...refcount=%d\n", __func__, rc); |
| panic("Fatal err: cannot free resources with pending references!"); |
| } |
| |
| genqwe_exit_debugfs(cd); |
| device_destroy(cd->class_genwqe, cd->devnum_genwqe); |
| cdev_del(&cd->cdev_genwqe); |
| unregister_chrdev_region(cd->devnum_genwqe, GENWQE_MAX_MINOR); |
| cd->dev = NULL; |
| |
| return 0; |
| } |