| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * drivers/net/phy/et1011c.c |
| * |
| * Driver for LSI ET1011C PHYs |
| * |
| * Author: Chaithrika U S |
| * |
| * Copyright (c) 2008 Texas Instruments |
| */ |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/errno.h> |
| #include <linux/unistd.h> |
| #include <linux/interrupt.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/spinlock.h> |
| #include <linux/mm.h> |
| #include <linux/module.h> |
| #include <linux/mii.h> |
| #include <linux/ethtool.h> |
| #include <linux/phy.h> |
| #include <linux/io.h> |
| #include <linux/uaccess.h> |
| #include <asm/irq.h> |
| |
| #define ET1011C_STATUS_REG (0x1A) |
| #define ET1011C_CONFIG_REG (0x16) |
| #define ET1011C_SPEED_MASK (0x0300) |
| #define ET1011C_GIGABIT_SPEED (0x0200) |
| #define ET1011C_TX_FIFO_MASK (0x3000) |
| #define ET1011C_TX_FIFO_DEPTH_8 (0x0000) |
| #define ET1011C_TX_FIFO_DEPTH_16 (0x1000) |
| #define ET1011C_INTERFACE_MASK (0x0007) |
| #define ET1011C_GMII_INTERFACE (0x0002) |
| #define ET1011C_SYS_CLK_EN (0x01 << 4) |
| |
| |
| MODULE_DESCRIPTION("LSI ET1011C PHY driver"); |
| MODULE_AUTHOR("Chaithrika U S"); |
| MODULE_LICENSE("GPL"); |
| |
| static int et1011c_config_aneg(struct phy_device *phydev) |
| { |
| int ctl = phy_read(phydev, MII_BMCR); |
| |
| if (ctl < 0) |
| return ctl; |
| ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | |
| BMCR_ANENABLE); |
| /* First clear the PHY */ |
| phy_write(phydev, MII_BMCR, ctl | BMCR_RESET); |
| |
| return genphy_config_aneg(phydev); |
| } |
| |
| static int et1011c_read_status(struct phy_device *phydev) |
| { |
| static int speed; |
| int ret; |
| u32 val; |
| |
| ret = genphy_read_status(phydev); |
| |
| if (speed != phydev->speed) { |
| speed = phydev->speed; |
| val = phy_read(phydev, ET1011C_STATUS_REG); |
| if ((val & ET1011C_SPEED_MASK) == |
| ET1011C_GIGABIT_SPEED) { |
| val = phy_read(phydev, ET1011C_CONFIG_REG); |
| val &= ~ET1011C_TX_FIFO_MASK; |
| phy_write(phydev, ET1011C_CONFIG_REG, val | |
| ET1011C_GMII_INTERFACE | |
| ET1011C_SYS_CLK_EN | |
| ET1011C_TX_FIFO_DEPTH_16); |
| |
| } |
| } |
| return ret; |
| } |
| |
| static struct phy_driver et1011c_driver[] = { { |
| .phy_id = 0x0282f014, |
| .name = "ET1011C", |
| .phy_id_mask = 0xfffffff0, |
| /* PHY_GBIT_FEATURES */ |
| .config_aneg = et1011c_config_aneg, |
| .read_status = et1011c_read_status, |
| } }; |
| |
| module_phy_driver(et1011c_driver); |
| |
| static struct mdio_device_id __maybe_unused et1011c_tbl[] = { |
| { 0x0282f014, 0xfffffff0 }, |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(mdio, et1011c_tbl); |