| # SPDX-License-Identifier: GPL-2.0-only |
| menuconfig SND_SOC_INTEL_MACH |
| bool "Intel Machine drivers" |
| depends on SND_SOC_INTEL_SST_TOPLEVEL || SND_SOC_SOF_INTEL_TOPLEVEL |
| help |
| Intel ASoC Machine Drivers. If you have a Intel machine that |
| has an audio controller with a DSP and I2S or DMIC port, then |
| enable this option by saying Y |
| |
| Note that the answer to this question doesn't directly affect the |
| kernel: saying N will just cause the configurator to skip all |
| the questions about Intel ASoC machine drivers. |
| |
| if SND_SOC_INTEL_MACH |
| |
| config SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES |
| bool "Use more user friendly long card names" |
| help |
| Some drivers report the I/O configuration to userspace through the |
| soundcard's long card name in the control user space AP. An unfortunate |
| side effect is that this long name may also be used by the GUI, |
| confusing users with information they don't need. |
| This option prevents the long name from being modified, and the I/O |
| configuration will be provided through a different component interface. |
| Select Y if userspace like UCM (Use Case Manager) uses the component |
| interface. |
| If unsure select N. |
| |
| config SND_SOC_INTEL_HDA_DSP_COMMON |
| tristate |
| |
| config SND_SOC_INTEL_SOF_MAXIM_COMMON |
| tristate |
| |
| config SND_SOC_INTEL_SOF_REALTEK_COMMON |
| tristate |
| |
| config SND_SOC_INTEL_SOF_CIRRUS_COMMON |
| tristate |
| |
| config SND_SOC_INTEL_SOF_NUVOTON_COMMON |
| tristate |
| |
| config SND_SOC_INTEL_SOF_SSP_COMMON |
| tristate |
| |
| config SND_SOC_INTEL_SOF_BOARD_HELPERS |
| tristate |
| |
| if SND_SOC_INTEL_CATPT |
| |
| config SND_SOC_INTEL_HASWELL_MACH |
| tristate "Haswell with RT5640 I2S codec" |
| depends on I2C |
| depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST |
| depends on X86_INTEL_LPSS || COMPILE_TEST |
| select SND_SOC_RT5640 |
| help |
| This adds support for the Lynxpoint Audio DSP on Intel(R) Haswell |
| Ultrabook platforms. This is a recommended option. |
| Say Y or m if you have such a device. |
| If unsure select "N". |
| |
| endif ## SND_SOC_INTEL_CATPT |
| |
| if SND_SOC_INTEL_CATPT || SND_SOC_SOF_BROADWELL |
| |
| config SND_SOC_INTEL_BDW_RT5650_MACH |
| tristate "Broadwell with RT5650 codec" |
| depends on I2C |
| depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST |
| depends on X86_INTEL_LPSS || COMPILE_TEST |
| select SND_SOC_RT5645 |
| help |
| This adds the ASoC machine driver for Intel Broadwell platforms with |
| the RT5650 codec. |
| Say Y if you have such a device. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_BDW_RT5677_MACH |
| tristate "Broadwell with RT5677 codec" |
| depends on I2C |
| depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST |
| depends on GPIOLIB || COMPILE_TEST |
| depends on X86_INTEL_LPSS || COMPILE_TEST |
| depends on SPI_MASTER |
| select SPI_PXA2XX |
| select SND_SOC_RT5677_SPI |
| select SND_SOC_RT5677 |
| help |
| This adds support for Intel Broadwell platform based boards with |
| the RT5677 audio codec. This is a recommended option. |
| Say Y or m if you have such a device. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_BROADWELL_MACH |
| tristate "Broadwell with RT286 I2S codec" |
| depends on I2C |
| depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST |
| depends on X86_INTEL_LPSS || COMPILE_TEST |
| select SND_SOC_RT286 |
| help |
| This adds support for the Wilcatpoint Audio DSP on Intel(R) Broadwell |
| Ultrabook platforms. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| endif ## SND_SOC_INTEL_CATPT || SND_SOC_SOF_BROADWELL |
| |
| if SND_SST_ATOM_HIFI2_PLATFORM || SND_SOC_SOF_BAYTRAIL |
| |
| config SND_SOC_INTEL_BYTCR_RT5640_MACH |
| tristate "Baytrail and Baytrail-CR with RT5640 codec" |
| depends on I2C && ACPI |
| depends on X86_INTEL_LPSS || COMPILE_TEST |
| depends on GPIOLIB || COMPILE_TEST |
| select SND_SOC_ACPI |
| select SND_SOC_RT5640 |
| help |
| This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR |
| platforms with RT5640 audio codec. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_BYTCR_RT5651_MACH |
| tristate "Baytrail and Baytrail-CR with RT5651 codec" |
| depends on I2C && ACPI |
| depends on X86_INTEL_LPSS || COMPILE_TEST |
| depends on GPIOLIB || COMPILE_TEST |
| select SND_SOC_ACPI |
| select SND_SOC_RT5651 |
| help |
| This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR |
| platforms with RT5651 audio codec. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_BYTCR_WM5102_MACH |
| tristate "Baytrail and Baytrail-CR with WM5102 codec" |
| depends on MFD_ARIZONA && MFD_WM5102 && SPI_MASTER && ACPI |
| depends on X86_INTEL_LPSS || COMPILE_TEST |
| depends on GPIOLIB || COMPILE_TEST |
| select SND_SOC_ACPI |
| select SND_SOC_WM5102 |
| help |
| This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR |
| platforms with WM5102 audio codec. |
| Say Y if you have such a device. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_CHT_BSW_RT5672_MACH |
| tristate "Cherrytrail & Braswell with RT5672 codec" |
| depends on I2C && ACPI |
| depends on X86_INTEL_LPSS || COMPILE_TEST |
| depends on GPIOLIB || COMPILE_TEST |
| select SND_SOC_ACPI |
| select SND_SOC_RT5670 |
| help |
| This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell |
| platforms with RT5672 audio codec. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_CHT_BSW_RT5645_MACH |
| tristate "Cherrytrail & Braswell with RT5645/5650 codec" |
| depends on I2C && ACPI |
| depends on X86_INTEL_LPSS || COMPILE_TEST |
| select SND_SOC_ACPI |
| select SND_SOC_RT5645 |
| help |
| This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell |
| platforms with RT5645/5650 audio codec. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH |
| tristate "Cherrytrail & Braswell with MAX98090 & TI codec" |
| depends on I2C && ACPI |
| depends on X86_INTEL_LPSS || COMPILE_TEST |
| depends on GPIOLIB || COMPILE_TEST |
| select SND_SOC_MAX98090 |
| select SND_SOC_TS3A227E |
| help |
| This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell |
| platforms with MAX98090 audio codec it also can support TI jack chip as aux device. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_CHT_BSW_NAU8824_MACH |
| tristate "Cherrytrail & Braswell with NAU88L24 codec" |
| depends on I2C && ACPI |
| depends on X86_INTEL_LPSS || COMPILE_TEST |
| select SND_SOC_ACPI |
| select SND_SOC_NAU8824 |
| help |
| This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell |
| platforms with NAU88L24 audio codec. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_BYT_CHT_CX2072X_MACH |
| tristate "Baytrail & Cherrytrail with CX2072X codec" |
| depends on I2C && ACPI |
| depends on X86_INTEL_LPSS || COMPILE_TEST |
| depends on GPIOLIB || COMPILE_TEST |
| select SND_SOC_ACPI |
| select SND_SOC_CX2072X |
| help |
| This adds support for ASoC machine driver for Intel(R) Baytrail & |
| Cherrytrail platforms with Conexant CX2072X audio codec. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_BYT_CHT_DA7213_MACH |
| tristate "Baytrail & Cherrytrail with DA7212/7213 codec" |
| depends on I2C && ACPI |
| depends on X86_INTEL_LPSS || COMPILE_TEST |
| select SND_SOC_ACPI |
| select SND_SOC_DA7213 |
| help |
| This adds support for ASoC machine driver for Intel(R) Baytrail & CherryTrail |
| platforms with DA7212/7213 audio codec. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_BYT_CHT_ES8316_MACH |
| tristate "Baytrail & Cherrytrail with ES8316 codec" |
| depends on I2C && ACPI |
| depends on X86_INTEL_LPSS || COMPILE_TEST |
| depends on GPIOLIB || COMPILE_TEST |
| select SND_SOC_ACPI |
| select SND_SOC_ES8316 |
| select SND_SOC_ES83XX_DSM_COMMON |
| help |
| This adds support for ASoC machine driver for Intel(R) Baytrail & |
| Cherrytrail platforms with ES8316 audio codec. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| endif ## SND_SST_ATOM_HIFI2_PLATFORM || SND_SOC_SOF_BAYTRAIL |
| |
| if SND_SST_ATOM_HIFI2_PLATFORM |
| |
| config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH |
| tristate "Baytrail & Cherrytrail platform with no codec (MinnowBoard MAX, Up)" |
| depends on I2C && ACPI |
| depends on X86_INTEL_LPSS || COMPILE_TEST |
| help |
| This adds support for ASoC machine driver for the MinnowBoard Max or |
| Up boards and provides access to I2S signals on the Low-Speed |
| connector. This is not a recommended option outside of these cases. |
| It is not intended to be enabled by distros by default. |
| Say Y or m if you have such a device. |
| |
| If unsure select "N". |
| |
| endif ## SND_SST_ATOM_HIFI2_PLATFORM |
| |
| if SND_SOC_INTEL_SKL |
| |
| config SND_SOC_INTEL_SKL_RT286_MACH |
| tristate "SKL with RT286 I2S mode" |
| depends on I2C && ACPI |
| depends on MFD_INTEL_LPSS || COMPILE_TEST |
| select SND_SOC_RT286 |
| select SND_SOC_DMIC |
| select SND_SOC_HDAC_HDMI |
| help |
| This adds support for ASoC machine driver for Skylake platforms |
| with RT286 I2S audio codec. |
| Say Y or m if you have such a device. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH |
| tristate "SKL with NAU88L25 and SSM4567 in I2S Mode" |
| depends on I2C && ACPI |
| depends on MFD_INTEL_LPSS || COMPILE_TEST |
| select SND_SOC_NAU8825 |
| select SND_SOC_SSM4567 |
| select SND_SOC_DMIC |
| select SND_SOC_HDAC_HDMI |
| help |
| This adds support for ASoC Onboard Codec I2S machine driver. This will |
| create an alsa sound card for NAU88L25 + SSM4567. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH |
| tristate "SKL with NAU88L25 and MAX98357A in I2S Mode" |
| depends on I2C && ACPI |
| depends on MFD_INTEL_LPSS || COMPILE_TEST |
| select SND_SOC_NAU8825 |
| select SND_SOC_MAX98357A |
| select SND_SOC_DMIC |
| select SND_SOC_HDAC_HDMI |
| help |
| This adds support for ASoC Onboard Codec I2S machine driver. This will |
| create an alsa sound card for NAU88L25 + MAX98357A. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| endif ## SND_SOC_INTEL_SKL |
| |
| config SND_SOC_INTEL_DA7219_MAX98357A_GENERIC |
| tristate |
| select SND_SOC_DA7219 |
| select SND_SOC_MAX98357A |
| select SND_SOC_MAX98390 |
| select SND_SOC_DMIC |
| select SND_SOC_HDAC_HDMI |
| select SND_SOC_INTEL_HDA_DSP_COMMON |
| |
| config SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON |
| tristate |
| select SND_SOC_INTEL_DA7219_MAX98357A_GENERIC |
| |
| if SND_SOC_INTEL_APL |
| |
| config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH |
| tristate "Broxton with DA7219 and MAX98357A/MAX98390 in I2S Mode" |
| depends on I2C && ACPI |
| depends on MFD_INTEL_LPSS || COMPILE_TEST |
| depends on SND_HDA_CODEC_HDMI |
| select SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON |
| help |
| This adds support for ASoC machine driver for Broxton-P platforms |
| with DA7219 + MAX98357A/MAX98390 I2S audio codec. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_BXT_RT298_MACH |
| tristate "Broxton with RT298 I2S mode" |
| depends on I2C && ACPI |
| depends on MFD_INTEL_LPSS || COMPILE_TEST |
| select SND_SOC_RT298 |
| select SND_SOC_DMIC |
| select SND_SOC_HDAC_HDMI |
| select SND_SOC_INTEL_HDA_DSP_COMMON |
| help |
| This adds support for ASoC machine driver for Broxton platforms |
| with RT286 I2S audio codec. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| endif ## SND_SOC_INTEL_APL |
| |
| if SND_SOC_SOF_APOLLOLAKE |
| |
| config SND_SOC_INTEL_SOF_WM8804_MACH |
| tristate "SOF with Wolfson/Cirrus WM8804 codec" |
| depends on I2C && ACPI |
| depends on MFD_INTEL_LPSS || COMPILE_TEST |
| depends on GPIOLIB || COMPILE_TEST |
| select SND_SOC_WM8804_I2C |
| help |
| This adds support for ASoC machine driver for Intel platforms |
| with the Wolfson/Cirrus WM8804 I2S audio codec. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| endif ## SND_SOC_SOF_APOLLOLAKE |
| |
| if SND_SOC_INTEL_KBL |
| |
| config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH |
| tristate "KBL with RT5663 and MAX98927 in I2S Mode" |
| depends on I2C && ACPI |
| depends on MFD_INTEL_LPSS || COMPILE_TEST |
| select SND_SOC_RT5663 |
| select SND_SOC_MAX98927 |
| select SND_SOC_DMIC |
| select SND_SOC_HDAC_HDMI |
| select SND_SOC_INTEL_SKYLAKE_SSP_CLK |
| help |
| This adds support for ASoC Onboard Codec I2S machine driver. This will |
| create an alsa sound card for RT5663 + MAX98927. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH |
| tristate "KBL with RT5663, RT5514 and MAX98927 in I2S Mode" |
| depends on I2C && ACPI |
| depends on MFD_INTEL_LPSS || COMPILE_TEST |
| depends on SPI |
| select SND_SOC_RT5663 |
| select SND_SOC_RT5514 |
| select SND_SOC_RT5514_SPI |
| select SND_SOC_MAX98927 |
| select SND_SOC_HDAC_HDMI |
| select SND_SOC_INTEL_SKYLAKE_SSP_CLK |
| help |
| This adds support for ASoC Onboard Codec I2S machine driver. This will |
| create an alsa sound card for RT5663 + RT5514 + MAX98927. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH |
| tristate "KBL with DA7219 and MAX98357A in I2S Mode" |
| depends on I2C && ACPI |
| depends on MFD_INTEL_LPSS || COMPILE_TEST |
| select SND_SOC_INTEL_DA7219_MAX98357A_GENERIC |
| help |
| This adds support for ASoC Onboard Codec I2S machine driver. This will |
| create an alsa sound card for DA7219 + MAX98357A I2S audio codec. |
| Say Y if you have such a device. |
| |
| config SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH |
| tristate "KBL with DA7219 and MAX98927 in I2S Mode" |
| depends on I2C && ACPI |
| depends on MFD_INTEL_LPSS || COMPILE_TEST |
| select SND_SOC_DA7219 |
| select SND_SOC_MAX98927 |
| select SND_SOC_MAX98373_I2C |
| select SND_SOC_DMIC |
| select SND_SOC_HDAC_HDMI |
| help |
| This adds support for ASoC Onboard Codec I2S machine driver. This will |
| create an alsa sound card for DA7219 + MAX98927 I2S audio codec. |
| Say Y if you have such a device. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_KBL_RT5660_MACH |
| tristate "KBL with RT5660 in I2S Mode" |
| depends on I2C && ACPI |
| depends on MFD_INTEL_LPSS || COMPILE_TEST |
| depends on GPIOLIB || COMPILE_TEST |
| select SND_SOC_RT5660 |
| select SND_SOC_HDAC_HDMI |
| help |
| This adds support for ASoC Onboard Codec I2S machine driver. This will |
| create an alsa sound card for RT5660 I2S audio codec. |
| Say Y if you have such a device. |
| |
| endif ## SND_SOC_INTEL_KBL |
| |
| if SND_SOC_SOF_GEMINILAKE |
| |
| config SND_SOC_INTEL_GLK_DA7219_MAX98357A_MACH |
| tristate "GLK with DA7219 and MAX98357A in I2S Mode" |
| depends on I2C && ACPI |
| depends on MFD_INTEL_LPSS || COMPILE_TEST |
| depends on SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC |
| select SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON |
| help |
| This adds support for ASoC machine driver for Geminilake platforms |
| with DA7219 + MAX98357A I2S audio codec. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH |
| tristate "GLK with RT5682 and MAX98357A in I2S Mode" |
| depends on I2C && ACPI |
| depends on MFD_INTEL_LPSS || COMPILE_TEST |
| depends on SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC |
| select SND_SOC_RT5682_I2C |
| select SND_SOC_RT5682S |
| select SND_SOC_MAX98357A |
| select SND_SOC_DMIC |
| select SND_SOC_HDAC_HDMI |
| select SND_SOC_INTEL_HDA_DSP_COMMON |
| help |
| This adds support for ASoC machine driver for Geminilake platforms |
| with RT5682 + MAX98357A I2S audio codec. |
| Say Y if you have such a device. |
| If unsure select "N". |
| |
| endif ## SND_SOC_SOF_GEMINILAKE |
| |
| if SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC || SND_SOC_SOF_HDA_AUDIO_CODEC |
| |
| config SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH |
| tristate "Skylake+ with HDA Codecs" |
| depends on SND_HDA_CODEC_HDMI |
| select SND_SOC_HDAC_HDMI |
| select SND_SOC_INTEL_HDA_DSP_COMMON |
| select SND_SOC_DMIC |
| # SND_SOC_HDAC_HDA is already selected |
| help |
| This adds support for ASoC machine driver for Intel Skylake+ |
| platforms with display (HDMI/DP) and HDA audio codecs, and |
| Smart Sound Technology (SST) integrated audio DSP. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| endif ## SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC || SND_SOC_SOF_HDA_AUDIO_CODEC |
| |
| if SND_SOC_SOF_HDA_LINK || SND_SOC_SOF_BAYTRAIL |
| config SND_SOC_INTEL_SOF_RT5682_MACH |
| tristate "SOF with rt5650/rt5682 codec in I2S Mode" |
| depends on I2C && ACPI |
| depends on ((SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC) &&\ |
| (MFD_INTEL_LPSS || COMPILE_TEST)) ||\ |
| (SND_SOC_SOF_BAYTRAIL && (X86_INTEL_LPSS || COMPILE_TEST)) |
| select SND_SOC_MAX98373_I2C |
| select SND_SOC_MAX98390 |
| select SND_SOC_RT1011 |
| select SND_SOC_RT1015 |
| select SND_SOC_RT1015P |
| select SND_SOC_RT5645 |
| select SND_SOC_RT5682_I2C |
| select SND_SOC_RT5682S |
| select SND_SOC_DMIC |
| select SND_SOC_INTEL_HDA_DSP_COMMON |
| select SND_SOC_INTEL_SOF_BOARD_HELPERS |
| select SND_SOC_INTEL_SOF_MAXIM_COMMON |
| select SND_SOC_INTEL_SOF_REALTEK_COMMON |
| select SND_SOC_INTEL_SOF_SSP_COMMON |
| help |
| This adds support for ASoC machine driver for SOF platforms |
| with rt5650 or rt5682 codec. |
| Say Y if you have such a device. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_SOF_CS42L42_MACH |
| tristate "SOF with cs42l42 codec in I2S Mode" |
| depends on I2C && ACPI |
| depends on ((SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC) &&\ |
| (MFD_INTEL_LPSS || COMPILE_TEST)) |
| select SND_SOC_CS42L42 |
| select SND_SOC_MAX98357A |
| select SND_SOC_DMIC |
| select SND_SOC_INTEL_HDA_DSP_COMMON |
| select SND_SOC_INTEL_SOF_BOARD_HELPERS |
| select SND_SOC_INTEL_SOF_MAXIM_COMMON |
| select SND_SOC_INTEL_SOF_SSP_COMMON |
| help |
| This adds support for ASoC machine driver for SOF platforms |
| with cs42l42 codec. |
| Say Y if you have such a device. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_SOF_PCM512x_MACH |
| tristate "SOF with TI PCM512x codec" |
| depends on I2C && ACPI |
| depends on (SND_SOC_SOF_HDA_AUDIO_CODEC && (MFD_INTEL_LPSS || COMPILE_TEST)) ||\ |
| (SND_SOC_SOF_BAYTRAIL && (X86_INTEL_LPSS || COMPILE_TEST)) |
| depends on SND_HDA_CODEC_HDMI |
| select SND_SOC_INTEL_HDA_DSP_COMMON |
| select SND_SOC_PCM512x_I2C |
| help |
| This adds support for ASoC machine driver for SOF platforms |
| with TI PCM512x I2S audio codec. |
| Say Y or m if you have such a device. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_SOF_ES8336_MACH |
| tristate "SOF with ES8336 or ES8326 codec in I2S mode" |
| depends on I2C && ACPI |
| depends on MFD_INTEL_LPSS || COMPILE_TEST |
| depends on GPIOLIB || COMPILE_TEST |
| depends on SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC |
| select SND_SOC_ES8316 |
| select SND_SOC_ES8326 |
| select SND_SOC_DMIC |
| select SND_SOC_INTEL_HDA_DSP_COMMON |
| help |
| This adds support for ASoC machine driver for SOF platforms |
| with es8336 codec. |
| Say Y if you have such a device. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_SOF_NAU8825_MACH |
| tristate "SOF with nau8825 codec in I2S Mode" |
| depends on I2C && ACPI |
| depends on ((SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC) &&\ |
| (MFD_INTEL_LPSS || COMPILE_TEST)) |
| select SND_SOC_NAU8825 |
| select SND_SOC_RT1015P |
| select SND_SOC_MAX98373_I2C |
| select SND_SOC_MAX98357A |
| select SND_SOC_NAU8315 |
| select SND_SOC_DMIC |
| select SND_SOC_INTEL_HDA_DSP_COMMON |
| select SND_SOC_INTEL_SOF_BOARD_HELPERS |
| select SND_SOC_INTEL_SOF_MAXIM_COMMON |
| select SND_SOC_INTEL_SOF_NUVOTON_COMMON |
| select SND_SOC_INTEL_SOF_REALTEK_COMMON |
| select SND_SOC_INTEL_SOF_SSP_COMMON |
| help |
| This adds support for ASoC machine driver for SOF platforms |
| with nau8825 codec. |
| Say Y if you have such a device. |
| If unsure select "N". |
| |
| endif ## SND_SOC_SOF_HDA_LINK || SND_SOC_SOF_BAYTRAIL |
| |
| if (SND_SOC_SOF_COMETLAKE && SND_SOC_SOF_HDA_LINK) |
| |
| config SND_SOC_INTEL_CML_LP_DA7219_MAX98357A_MACH |
| tristate "CML_LP with DA7219 and MAX98357A in I2S Mode" |
| depends on I2C && ACPI |
| depends on MFD_INTEL_LPSS || COMPILE_TEST |
| select SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON |
| help |
| This adds support for ASoC machine driver for Cometlake platforms |
| with DA7219 + MAX98357A I2S audio codec. |
| Say Y or m if you have such a device. This is a recommended option. |
| If unsure select "N". |
| |
| config SND_SOC_INTEL_SOF_CML_RT1011_RT5682_MACH |
| tristate "CML with RT1011 and RT5682 in I2S Mode" |
| depends on I2C && ACPI |
| depends on MFD_INTEL_LPSS || COMPILE_TEST |
| depends on SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC |
| select SND_SOC_RT1011 |
| select SND_SOC_RT5682_I2C |
| select SND_SOC_DMIC |
| select SND_SOC_HDAC_HDMI |
| select SND_SOC_INTEL_HDA_DSP_COMMON |
| help |
| This adds support for ASoC machine driver for SOF platform with |
| RT1011 + RT5682 I2S codec. |
| Say Y if you have such a device. |
| If unsure select "N". |
| |
| endif ## SND_SOC_SOF_COMETLAKE && SND_SOC_SOF_HDA_LINK |
| |
| config SND_SOC_INTEL_SOF_DA7219_MACH |
| tristate "SOF with DA7219 codec in I2S Mode" |
| depends on I2C && ACPI |
| depends on MFD_INTEL_LPSS || COMPILE_TEST |
| depends on SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC |
| select SND_SOC_INTEL_HDA_DSP_COMMON |
| select SND_SOC_DA7219 |
| select SND_SOC_MAX98357A |
| select SND_SOC_MAX98373_I2C |
| select SND_SOC_DMIC |
| select SND_SOC_INTEL_SOF_MAXIM_COMMON |
| select SND_SOC_INTEL_SOF_SSP_COMMON |
| help |
| This adds support for ASoC machine driver for SOF platforms |
| with Dialog DA7219 I2S audio codec. |
| Say Y if you have such a device. |
| If unsure select "N". |
| |
| if SND_SOC_SOF_HDA_LINK |
| |
| config SND_SOC_INTEL_SOF_SSP_AMP_MACH |
| tristate "SOF with amplifiers in I2S Mode" |
| depends on I2C && ACPI |
| depends on MFD_INTEL_LPSS || COMPILE_TEST |
| select SND_SOC_RT1308 |
| select SND_SOC_CS35L41_I2C |
| select SND_SOC_DMIC |
| select SND_SOC_INTEL_HDA_DSP_COMMON |
| select SND_SOC_INTEL_SOF_BOARD_HELPERS |
| select SND_SOC_INTEL_SOF_REALTEK_COMMON |
| select SND_SOC_INTEL_SOF_CIRRUS_COMMON |
| select SND_SOC_INTEL_SOF_SSP_COMMON |
| help |
| This adds support for ASoC machine driver for SOF platforms |
| with RT1308/CS35L41 I2S audio codec. |
| Say Y if you have such a device. |
| If unsure select "N". |
| endif ## SND_SOC_SOF_HDA_LINK |
| |
| if SND_SOC_SOF_ELKHARTLAKE |
| |
| config SND_SOC_INTEL_EHL_RT5660_MACH |
| tristate "EHL with RT5660 in I2S mode" |
| depends on I2C && ACPI |
| depends on MFD_INTEL_LPSS || COMPILE_TEST |
| depends on SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC |
| select SND_SOC_RT5660 |
| select SND_SOC_DMIC |
| select SND_SOC_INTEL_HDA_DSP_COMMON |
| help |
| This adds support for ASoC machine driver for Elkhart Lake |
| platform with RT5660 I2S audio codec. |
| |
| endif ## SND_SOC_SOF_ELKHARTLAKE |
| |
| if SND_SOC_SOF_INTEL_SOUNDWIRE |
| |
| config SND_SOC_INTEL_SOUNDWIRE_SOF_MACH |
| tristate "SoundWire generic machine driver" |
| depends on I2C && ACPI |
| depends on MFD_INTEL_LPSS || COMPILE_TEST |
| depends on SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES || COMPILE_TEST |
| depends on SOUNDWIRE |
| select SND_SOC_MAX98363 |
| select SND_SOC_MAX98373_I2C |
| select SND_SOC_MAX98373_SDW |
| select SND_SOC_RT700_SDW |
| select SND_SOC_RT711_SDW |
| select SND_SOC_RT711_SDCA_SDW |
| select SND_SOC_RT712_SDCA_SDW |
| select SND_SOC_RT712_SDCA_DMIC_SDW |
| select SND_SOC_RT715_SDW |
| select SND_SOC_RT715_SDCA_SDW |
| select SND_SOC_RT722_SDCA_SDW |
| select SND_SOC_RT1308_SDW |
| select SND_SOC_RT1308 |
| select SND_SOC_RT1316_SDW |
| select SND_SOC_RT1318_SDW |
| select SND_SOC_RT5682_SDW |
| select SND_SOC_CS42L42_SDW |
| select SND_SOC_CS42L43 |
| select SND_SOC_CS42L43_SDW |
| select MFD_CS42L43 |
| select MFD_CS42L43_SDW |
| select SND_SOC_CS35L56_SDW |
| select SND_SOC_DMIC |
| select SND_SOC_INTEL_HDA_DSP_COMMON |
| select SND_SOC_INTEL_SOF_MAXIM_COMMON |
| imply SND_SOC_SDW_MOCKUP |
| help |
| Add support for Intel SoundWire-based platforms connected to |
| MAX98373, RT700, RT711, RT1308 and RT715 |
| If unsure select "N". |
| |
| endif |
| |
| endif ## SND_SOC_INTEL_MACH |
