| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * |
| * Generic Bluetooth SDIO driver |
| * |
| * Copyright (C) 2007 Cambridge Silicon Radio Ltd. |
| * Copyright (C) 2007 Marcel Holtmann <marcel@holtmann.org> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/types.h> |
| #include <linux/sched.h> |
| #include <linux/errno.h> |
| #include <linux/skbuff.h> |
| |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/sdio_ids.h> |
| #include <linux/mmc/sdio_func.h> |
| |
| #include <net/bluetooth/bluetooth.h> |
| #include <net/bluetooth/hci_core.h> |
| |
| #define VERSION "0.1" |
| |
| static const struct sdio_device_id btsdio_table[] = { |
| /* Generic Bluetooth Type-A SDIO device */ |
| { SDIO_DEVICE_CLASS(SDIO_CLASS_BT_A) }, |
| |
| /* Generic Bluetooth Type-B SDIO device */ |
| { SDIO_DEVICE_CLASS(SDIO_CLASS_BT_B) }, |
| |
| { } /* Terminating entry */ |
| }; |
| |
| MODULE_DEVICE_TABLE(sdio, btsdio_table); |
| |
| struct btsdio_data { |
| struct hci_dev *hdev; |
| struct sdio_func *func; |
| |
| struct work_struct work; |
| |
| struct sk_buff_head txq; |
| }; |
| |
| #define REG_RDAT 0x00 /* Receiver Data */ |
| #define REG_TDAT 0x00 /* Transmitter Data */ |
| #define REG_PC_RRT 0x10 /* Read Packet Control */ |
| #define REG_PC_WRT 0x11 /* Write Packet Control */ |
| #define REG_RTC_STAT 0x12 /* Retry Control Status */ |
| #define REG_RTC_SET 0x12 /* Retry Control Set */ |
| #define REG_INTRD 0x13 /* Interrupt Indication */ |
| #define REG_CL_INTRD 0x13 /* Interrupt Clear */ |
| #define REG_EN_INTRD 0x14 /* Interrupt Enable */ |
| #define REG_MD_STAT 0x20 /* Bluetooth Mode Status */ |
| #define REG_MD_SET 0x20 /* Bluetooth Mode Set */ |
| |
| static int btsdio_tx_packet(struct btsdio_data *data, struct sk_buff *skb) |
| { |
| int err; |
| |
| BT_DBG("%s", data->hdev->name); |
| |
| /* Prepend Type-A header */ |
| skb_push(skb, 4); |
| skb->data[0] = (skb->len & 0x0000ff); |
| skb->data[1] = (skb->len & 0x00ff00) >> 8; |
| skb->data[2] = (skb->len & 0xff0000) >> 16; |
| skb->data[3] = hci_skb_pkt_type(skb); |
| |
| err = sdio_writesb(data->func, REG_TDAT, skb->data, skb->len); |
| if (err < 0) { |
| skb_pull(skb, 4); |
| sdio_writeb(data->func, 0x01, REG_PC_WRT, NULL); |
| return err; |
| } |
| |
| data->hdev->stat.byte_tx += skb->len; |
| |
| kfree_skb(skb); |
| |
| return 0; |
| } |
| |
| static void btsdio_work(struct work_struct *work) |
| { |
| struct btsdio_data *data = container_of(work, struct btsdio_data, work); |
| struct sk_buff *skb; |
| int err; |
| |
| BT_DBG("%s", data->hdev->name); |
| |
| sdio_claim_host(data->func); |
| |
| while ((skb = skb_dequeue(&data->txq))) { |
| err = btsdio_tx_packet(data, skb); |
| if (err < 0) { |
| data->hdev->stat.err_tx++; |
| skb_queue_head(&data->txq, skb); |
| break; |
| } |
| } |
| |
| sdio_release_host(data->func); |
| } |
| |
| static int btsdio_rx_packet(struct btsdio_data *data) |
| { |
| u8 hdr[4] __attribute__ ((aligned(4))); |
| struct sk_buff *skb; |
| int err, len; |
| |
| BT_DBG("%s", data->hdev->name); |
| |
| err = sdio_readsb(data->func, hdr, REG_RDAT, 4); |
| if (err < 0) |
| return err; |
| |
| len = hdr[0] | (hdr[1] << 8) | (hdr[2] << 16); |
| if (len < 4 || len > 65543) |
| return -EILSEQ; |
| |
| skb = bt_skb_alloc(len - 4, GFP_KERNEL); |
| if (!skb) { |
| /* Out of memory. Prepare a read retry and just |
| * return with the expectation that the next time |
| * we're called we'll have more memory. |
| */ |
| return -ENOMEM; |
| } |
| |
| skb_put(skb, len - 4); |
| |
| err = sdio_readsb(data->func, skb->data, REG_RDAT, len - 4); |
| if (err < 0) { |
| kfree_skb(skb); |
| return err; |
| } |
| |
| data->hdev->stat.byte_rx += len; |
| |
| switch (hdr[3]) { |
| case HCI_EVENT_PKT: |
| case HCI_ACLDATA_PKT: |
| case HCI_SCODATA_PKT: |
| case HCI_ISODATA_PKT: |
| hci_skb_pkt_type(skb) = hdr[3]; |
| err = hci_recv_frame(data->hdev, skb); |
| if (err < 0) |
| return err; |
| break; |
| default: |
| kfree_skb(skb); |
| return -EINVAL; |
| } |
| |
| sdio_writeb(data->func, 0x00, REG_PC_RRT, NULL); |
| |
| return 0; |
| } |
| |
| static void btsdio_interrupt(struct sdio_func *func) |
| { |
| struct btsdio_data *data = sdio_get_drvdata(func); |
| int intrd; |
| |
| BT_DBG("%s", data->hdev->name); |
| |
| intrd = sdio_readb(func, REG_INTRD, NULL); |
| if (intrd & 0x01) { |
| sdio_writeb(func, 0x01, REG_CL_INTRD, NULL); |
| |
| if (btsdio_rx_packet(data) < 0) { |
| data->hdev->stat.err_rx++; |
| sdio_writeb(data->func, 0x01, REG_PC_RRT, NULL); |
| } |
| } |
| } |
| |
| static int btsdio_open(struct hci_dev *hdev) |
| { |
| struct btsdio_data *data = hci_get_drvdata(hdev); |
| int err; |
| |
| BT_DBG("%s", hdev->name); |
| |
| sdio_claim_host(data->func); |
| |
| err = sdio_enable_func(data->func); |
| if (err < 0) |
| goto release; |
| |
| err = sdio_claim_irq(data->func, btsdio_interrupt); |
| if (err < 0) { |
| sdio_disable_func(data->func); |
| goto release; |
| } |
| |
| if (data->func->class == SDIO_CLASS_BT_B) |
| sdio_writeb(data->func, 0x00, REG_MD_SET, NULL); |
| |
| sdio_writeb(data->func, 0x01, REG_EN_INTRD, NULL); |
| |
| release: |
| sdio_release_host(data->func); |
| |
| return err; |
| } |
| |
| static int btsdio_close(struct hci_dev *hdev) |
| { |
| struct btsdio_data *data = hci_get_drvdata(hdev); |
| |
| BT_DBG("%s", hdev->name); |
| |
| sdio_claim_host(data->func); |
| |
| sdio_writeb(data->func, 0x00, REG_EN_INTRD, NULL); |
| |
| sdio_release_irq(data->func); |
| sdio_disable_func(data->func); |
| |
| sdio_release_host(data->func); |
| |
| return 0; |
| } |
| |
| static int btsdio_flush(struct hci_dev *hdev) |
| { |
| struct btsdio_data *data = hci_get_drvdata(hdev); |
| |
| BT_DBG("%s", hdev->name); |
| |
| skb_queue_purge(&data->txq); |
| |
| return 0; |
| } |
| |
| static int btsdio_send_frame(struct hci_dev *hdev, struct sk_buff *skb) |
| { |
| struct btsdio_data *data = hci_get_drvdata(hdev); |
| |
| BT_DBG("%s", hdev->name); |
| |
| switch (hci_skb_pkt_type(skb)) { |
| case HCI_COMMAND_PKT: |
| hdev->stat.cmd_tx++; |
| break; |
| |
| case HCI_ACLDATA_PKT: |
| hdev->stat.acl_tx++; |
| break; |
| |
| case HCI_SCODATA_PKT: |
| hdev->stat.sco_tx++; |
| break; |
| |
| default: |
| return -EILSEQ; |
| } |
| |
| skb_queue_tail(&data->txq, skb); |
| |
| schedule_work(&data->work); |
| |
| return 0; |
| } |
| |
| static int btsdio_probe(struct sdio_func *func, |
| const struct sdio_device_id *id) |
| { |
| struct btsdio_data *data; |
| struct hci_dev *hdev; |
| struct sdio_func_tuple *tuple = func->tuples; |
| int err; |
| |
| BT_DBG("func %p id %p class 0x%04x", func, id, func->class); |
| |
| while (tuple) { |
| BT_DBG("code 0x%x size %d", tuple->code, tuple->size); |
| tuple = tuple->next; |
| } |
| |
| /* Broadcom devices soldered onto the PCB (non-removable) use an |
| * UART connection for Bluetooth, ignore the BT SDIO interface. |
| */ |
| if (func->vendor == SDIO_VENDOR_ID_BROADCOM && |
| !mmc_card_is_removable(func->card->host)) { |
| switch (func->device) { |
| case SDIO_DEVICE_ID_BROADCOM_43341: |
| case SDIO_DEVICE_ID_BROADCOM_43430: |
| case SDIO_DEVICE_ID_BROADCOM_4345: |
| case SDIO_DEVICE_ID_BROADCOM_43455: |
| case SDIO_DEVICE_ID_BROADCOM_4356: |
| return -ENODEV; |
| } |
| } |
| |
| data = devm_kzalloc(&func->dev, sizeof(*data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| data->func = func; |
| |
| INIT_WORK(&data->work, btsdio_work); |
| |
| skb_queue_head_init(&data->txq); |
| |
| hdev = hci_alloc_dev(); |
| if (!hdev) |
| return -ENOMEM; |
| |
| hdev->bus = HCI_SDIO; |
| hci_set_drvdata(hdev, data); |
| |
| data->hdev = hdev; |
| |
| SET_HCIDEV_DEV(hdev, &func->dev); |
| |
| hdev->open = btsdio_open; |
| hdev->close = btsdio_close; |
| hdev->flush = btsdio_flush; |
| hdev->send = btsdio_send_frame; |
| |
| if (func->vendor == 0x0104 && func->device == 0x00c5) |
| set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks); |
| |
| err = hci_register_dev(hdev); |
| if (err < 0) { |
| hci_free_dev(hdev); |
| return err; |
| } |
| |
| sdio_set_drvdata(func, data); |
| |
| return 0; |
| } |
| |
| static void btsdio_remove(struct sdio_func *func) |
| { |
| struct btsdio_data *data = sdio_get_drvdata(func); |
| struct hci_dev *hdev; |
| |
| BT_DBG("func %p", func); |
| |
| if (!data) |
| return; |
| |
| cancel_work_sync(&data->work); |
| hdev = data->hdev; |
| |
| sdio_set_drvdata(func, NULL); |
| |
| hci_unregister_dev(hdev); |
| |
| hci_free_dev(hdev); |
| } |
| |
| static struct sdio_driver btsdio_driver = { |
| .name = "btsdio", |
| .probe = btsdio_probe, |
| .remove = btsdio_remove, |
| .id_table = btsdio_table, |
| }; |
| |
| module_sdio_driver(btsdio_driver); |
| |
| MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>"); |
| MODULE_DESCRIPTION("Generic Bluetooth SDIO driver ver " VERSION); |
| MODULE_VERSION(VERSION); |
| MODULE_LICENSE("GPL"); |