| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Hardware monitoring driver for Maxim MAX15301 |
| * |
| * Copyright (c) 2021 Flextronics International Sweden AB |
| * |
| * Even though the specification does not specifically mention it, |
| * extensive empirical testing has revealed that auto-detection of |
| * limit-registers will fail in a random fashion unless the delay |
| * parameter is set to above about 80us. The default delay is set |
| * to 100us to include some safety margin. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/err.h> |
| #include <linux/slab.h> |
| #include <linux/i2c.h> |
| #include <linux/ktime.h> |
| #include <linux/delay.h> |
| #include <linux/pmbus.h> |
| #include "pmbus.h" |
| |
| static const struct i2c_device_id max15301_id[] = { |
| { "bmr461" }, |
| { "max15301" }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, max15301_id); |
| |
| struct max15301_data { |
| int id; |
| ktime_t access; /* Chip access time */ |
| int delay; /* Delay between chip accesses in us */ |
| struct pmbus_driver_info info; |
| }; |
| |
| #define to_max15301_data(x) container_of(x, struct max15301_data, info) |
| |
| #define MAX15301_WAIT_TIME 100 /* us */ |
| |
| static ushort delay = MAX15301_WAIT_TIME; |
| module_param(delay, ushort, 0644); |
| MODULE_PARM_DESC(delay, "Delay between chip accesses in us"); |
| |
| static struct max15301_data max15301_data = { |
| .info = { |
| .pages = 1, |
| .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
| | PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT |
| | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 |
| | PMBUS_HAVE_STATUS_TEMP |
| | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT, |
| } |
| }; |
| |
| /* This chip needs a delay between accesses */ |
| static inline void max15301_wait(const struct max15301_data *data) |
| { |
| if (data->delay) { |
| s64 delta = ktime_us_delta(ktime_get(), data->access); |
| |
| if (delta < data->delay) |
| udelay(data->delay - delta); |
| } |
| } |
| |
| static int max15301_read_word_data(struct i2c_client *client, int page, |
| int phase, int reg) |
| { |
| const struct pmbus_driver_info *info = pmbus_get_driver_info(client); |
| struct max15301_data *data = to_max15301_data(info); |
| int ret; |
| |
| if (page > 0) |
| return -ENXIO; |
| |
| if (reg >= PMBUS_VIRT_BASE) |
| return -ENXIO; |
| |
| max15301_wait(data); |
| ret = pmbus_read_word_data(client, page, phase, reg); |
| data->access = ktime_get(); |
| |
| return ret; |
| } |
| |
| static int max15301_read_byte_data(struct i2c_client *client, int page, int reg) |
| { |
| const struct pmbus_driver_info *info = pmbus_get_driver_info(client); |
| struct max15301_data *data = to_max15301_data(info); |
| int ret; |
| |
| if (page > 0) |
| return -ENXIO; |
| |
| max15301_wait(data); |
| ret = pmbus_read_byte_data(client, page, reg); |
| data->access = ktime_get(); |
| |
| return ret; |
| } |
| |
| static int max15301_write_word_data(struct i2c_client *client, int page, int reg, |
| u16 word) |
| { |
| const struct pmbus_driver_info *info = pmbus_get_driver_info(client); |
| struct max15301_data *data = to_max15301_data(info); |
| int ret; |
| |
| if (page > 0) |
| return -ENXIO; |
| |
| if (reg >= PMBUS_VIRT_BASE) |
| return -ENXIO; |
| |
| max15301_wait(data); |
| ret = pmbus_write_word_data(client, page, reg, word); |
| data->access = ktime_get(); |
| |
| return ret; |
| } |
| |
| static int max15301_write_byte(struct i2c_client *client, int page, u8 value) |
| { |
| const struct pmbus_driver_info *info = pmbus_get_driver_info(client); |
| struct max15301_data *data = to_max15301_data(info); |
| int ret; |
| |
| if (page > 0) |
| return -ENXIO; |
| |
| max15301_wait(data); |
| ret = pmbus_write_byte(client, page, value); |
| data->access = ktime_get(); |
| |
| return ret; |
| } |
| |
| static int max15301_probe(struct i2c_client *client) |
| { |
| int status; |
| u8 device_id[I2C_SMBUS_BLOCK_MAX + 1]; |
| const struct i2c_device_id *mid; |
| struct pmbus_driver_info *info = &max15301_data.info; |
| |
| if (!i2c_check_functionality(client->adapter, |
| I2C_FUNC_SMBUS_READ_BYTE_DATA |
| | I2C_FUNC_SMBUS_BLOCK_DATA)) |
| return -ENODEV; |
| |
| status = i2c_smbus_read_block_data(client, PMBUS_IC_DEVICE_ID, device_id); |
| if (status < 0) { |
| dev_err(&client->dev, "Failed to read Device Id\n"); |
| return status; |
| } |
| for (mid = max15301_id; mid->name[0]; mid++) { |
| if (!strncasecmp(mid->name, device_id, strlen(mid->name))) |
| break; |
| } |
| if (!mid->name[0]) { |
| dev_err(&client->dev, "Unsupported device\n"); |
| return -ENODEV; |
| } |
| |
| max15301_data.delay = delay; |
| |
| info->read_byte_data = max15301_read_byte_data; |
| info->read_word_data = max15301_read_word_data; |
| info->write_byte = max15301_write_byte; |
| info->write_word_data = max15301_write_word_data; |
| |
| return pmbus_do_probe(client, info); |
| } |
| |
| static struct i2c_driver max15301_driver = { |
| .driver = { |
| .name = "max15301", |
| }, |
| .probe = max15301_probe, |
| .id_table = max15301_id, |
| }; |
| |
| module_i2c_driver(max15301_driver); |
| |
| MODULE_AUTHOR("Erik Rosen <erik.rosen@metormote.com>"); |
| MODULE_DESCRIPTION("PMBus driver for Maxim MAX15301"); |
| MODULE_LICENSE("GPL"); |
| MODULE_IMPORT_NS(PMBUS); |