| #ifndef _KEXEC_H |
| #define _KEXEC_H |
| |
| #ifdef CONFIG_X86_32 |
| # define PA_CONTROL_PAGE 0 |
| # define VA_CONTROL_PAGE 1 |
| # define PA_PGD 2 |
| # define VA_PGD 3 |
| # define PA_PTE_0 4 |
| # define VA_PTE_0 5 |
| # define PA_PTE_1 6 |
| # define VA_PTE_1 7 |
| # define PA_SWAP_PAGE 8 |
| # ifdef CONFIG_X86_PAE |
| # define PA_PMD_0 9 |
| # define VA_PMD_0 10 |
| # define PA_PMD_1 11 |
| # define VA_PMD_1 12 |
| # define PAGES_NR 13 |
| # else |
| # define PAGES_NR 9 |
| # endif |
| #else |
| # define PA_CONTROL_PAGE 0 |
| # define VA_CONTROL_PAGE 1 |
| # define PA_PGD 2 |
| # define VA_PGD 3 |
| # define PA_PUD_0 4 |
| # define VA_PUD_0 5 |
| # define PA_PMD_0 6 |
| # define VA_PMD_0 7 |
| # define PA_PTE_0 8 |
| # define VA_PTE_0 9 |
| # define PA_PUD_1 10 |
| # define VA_PUD_1 11 |
| # define PA_PMD_1 12 |
| # define VA_PMD_1 13 |
| # define PA_PTE_1 14 |
| # define VA_PTE_1 15 |
| # define PA_TABLE_PAGE 16 |
| # define PAGES_NR 17 |
| #endif |
| |
| #ifndef __ASSEMBLY__ |
| |
| #include <linux/string.h> |
| |
| #include <asm/page.h> |
| #include <asm/ptrace.h> |
| |
| /* |
| * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return. |
| * I.e. Maximum page that is mapped directly into kernel memory, |
| * and kmap is not required. |
| * |
| * So far x86_64 is limited to 40 physical address bits. |
| */ |
| #ifdef CONFIG_X86_32 |
| /* Maximum physical address we can use pages from */ |
| # define KEXEC_SOURCE_MEMORY_LIMIT (-1UL) |
| /* Maximum address we can reach in physical address mode */ |
| # define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL) |
| /* Maximum address we can use for the control code buffer */ |
| # define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE |
| |
| # define KEXEC_CONTROL_CODE_SIZE 4096 |
| |
| /* The native architecture */ |
| # define KEXEC_ARCH KEXEC_ARCH_386 |
| |
| /* We can also handle crash dumps from 64 bit kernel. */ |
| # define vmcore_elf_check_arch_cross(x) ((x)->e_machine == EM_X86_64) |
| #else |
| /* Maximum physical address we can use pages from */ |
| # define KEXEC_SOURCE_MEMORY_LIMIT (0xFFFFFFFFFFUL) |
| /* Maximum address we can reach in physical address mode */ |
| # define KEXEC_DESTINATION_MEMORY_LIMIT (0xFFFFFFFFFFUL) |
| /* Maximum address we can use for the control pages */ |
| # define KEXEC_CONTROL_MEMORY_LIMIT (0xFFFFFFFFFFUL) |
| |
| /* Allocate one page for the pdp and the second for the code */ |
| # define KEXEC_CONTROL_CODE_SIZE (4096UL + 4096UL) |
| |
| /* The native architecture */ |
| # define KEXEC_ARCH KEXEC_ARCH_X86_64 |
| #endif |
| |
| /* |
| * CPU does not save ss and sp on stack if execution is already |
| * running in kernel mode at the time of NMI occurrence. This code |
| * fixes it. |
| */ |
| static inline void crash_fixup_ss_esp(struct pt_regs *newregs, |
| struct pt_regs *oldregs) |
| { |
| #ifdef CONFIG_X86_32 |
| newregs->sp = (unsigned long)&(oldregs->sp); |
| asm volatile("xorl %%eax, %%eax\n\t" |
| "movw %%ss, %%ax\n\t" |
| :"=a"(newregs->ss)); |
| #endif |
| } |
| |
| /* |
| * This function is responsible for capturing register states if coming |
| * via panic otherwise just fix up the ss and sp if coming via kernel |
| * mode exception. |
| */ |
| static inline void crash_setup_regs(struct pt_regs *newregs, |
| struct pt_regs *oldregs) |
| { |
| if (oldregs) { |
| memcpy(newregs, oldregs, sizeof(*newregs)); |
| crash_fixup_ss_esp(newregs, oldregs); |
| } else { |
| #ifdef CONFIG_X86_32 |
| asm volatile("movl %%ebx,%0" : "=m"(newregs->bx)); |
| asm volatile("movl %%ecx,%0" : "=m"(newregs->cx)); |
| asm volatile("movl %%edx,%0" : "=m"(newregs->dx)); |
| asm volatile("movl %%esi,%0" : "=m"(newregs->si)); |
| asm volatile("movl %%edi,%0" : "=m"(newregs->di)); |
| asm volatile("movl %%ebp,%0" : "=m"(newregs->bp)); |
| asm volatile("movl %%eax,%0" : "=m"(newregs->ax)); |
| asm volatile("movl %%esp,%0" : "=m"(newregs->sp)); |
| asm volatile("movl %%ss, %%eax;" :"=a"(newregs->ss)); |
| asm volatile("movl %%cs, %%eax;" :"=a"(newregs->cs)); |
| asm volatile("movl %%ds, %%eax;" :"=a"(newregs->ds)); |
| asm volatile("movl %%es, %%eax;" :"=a"(newregs->es)); |
| asm volatile("pushfl; popl %0" :"=m"(newregs->flags)); |
| #else |
| asm volatile("movq %%rbx,%0" : "=m"(newregs->bx)); |
| asm volatile("movq %%rcx,%0" : "=m"(newregs->cx)); |
| asm volatile("movq %%rdx,%0" : "=m"(newregs->dx)); |
| asm volatile("movq %%rsi,%0" : "=m"(newregs->si)); |
| asm volatile("movq %%rdi,%0" : "=m"(newregs->di)); |
| asm volatile("movq %%rbp,%0" : "=m"(newregs->bp)); |
| asm volatile("movq %%rax,%0" : "=m"(newregs->ax)); |
| asm volatile("movq %%rsp,%0" : "=m"(newregs->sp)); |
| asm volatile("movq %%r8,%0" : "=m"(newregs->r8)); |
| asm volatile("movq %%r9,%0" : "=m"(newregs->r9)); |
| asm volatile("movq %%r10,%0" : "=m"(newregs->r10)); |
| asm volatile("movq %%r11,%0" : "=m"(newregs->r11)); |
| asm volatile("movq %%r12,%0" : "=m"(newregs->r12)); |
| asm volatile("movq %%r13,%0" : "=m"(newregs->r13)); |
| asm volatile("movq %%r14,%0" : "=m"(newregs->r14)); |
| asm volatile("movq %%r15,%0" : "=m"(newregs->r15)); |
| asm volatile("movl %%ss, %%eax;" :"=a"(newregs->ss)); |
| asm volatile("movl %%cs, %%eax;" :"=a"(newregs->cs)); |
| asm volatile("pushfq; popq %0" :"=m"(newregs->flags)); |
| #endif |
| newregs->ip = (unsigned long)current_text_addr(); |
| } |
| } |
| |
| #ifdef CONFIG_X86_32 |
| asmlinkage unsigned long |
| relocate_kernel(unsigned long indirection_page, |
| unsigned long control_page, |
| unsigned long start_address, |
| unsigned int has_pae, |
| unsigned int preserve_context); |
| #else |
| NORET_TYPE void |
| relocate_kernel(unsigned long indirection_page, |
| unsigned long page_list, |
| unsigned long start_address) ATTRIB_NORET; |
| #endif |
| |
| #endif /* __ASSEMBLY__ */ |
| |
| #endif /* _KEXEC_H */ |