| // SPDX-License-Identifier: GPL-2.0-only OR MIT |
| /* |
| * Bluetooth HCI driver for Broadcom 4377/4378/4387 devices attached via PCIe |
| * |
| * Copyright (C) The Asahi Linux Contributors |
| */ |
| |
| #include <linux/async.h> |
| #include <linux/bitfield.h> |
| #include <linux/completion.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/dmi.h> |
| #include <linux/firmware.h> |
| #include <linux/module.h> |
| #include <linux/msi.h> |
| #include <linux/of.h> |
| #include <linux/pci.h> |
| #include <linux/printk.h> |
| |
| #include <asm/unaligned.h> |
| |
| #include <net/bluetooth/bluetooth.h> |
| #include <net/bluetooth/hci_core.h> |
| |
| enum bcm4377_chip { |
| BCM4377 = 0, |
| BCM4378, |
| BCM4387, |
| }; |
| |
| #define BCM4377_DEVICE_ID 0x5fa0 |
| #define BCM4378_DEVICE_ID 0x5f69 |
| #define BCM4387_DEVICE_ID 0x5f71 |
| |
| #define BCM4377_TIMEOUT 1000 |
| |
| /* |
| * These devices only support DMA transactions inside a 32bit window |
| * (possibly to avoid 64 bit arithmetic). The window size cannot exceed |
| * 0xffffffff but is always aligned down to the previous 0x200 byte boundary |
| * which effectively limits the window to [start, start+0xfffffe00]. |
| * We just limit the DMA window to [0, 0xfffffe00] to make sure we don't |
| * run into this limitation. |
| */ |
| #define BCM4377_DMA_MASK 0xfffffe00 |
| |
| #define BCM4377_PCIECFG_BAR0_WINDOW1 0x80 |
| #define BCM4377_PCIECFG_BAR0_WINDOW2 0x70 |
| #define BCM4377_PCIECFG_BAR0_CORE2_WINDOW1 0x74 |
| #define BCM4377_PCIECFG_BAR0_CORE2_WINDOW2 0x78 |
| #define BCM4377_PCIECFG_BAR2_WINDOW 0x84 |
| |
| #define BCM4377_PCIECFG_BAR0_CORE2_WINDOW1_DEFAULT 0x18011000 |
| #define BCM4377_PCIECFG_BAR2_WINDOW_DEFAULT 0x19000000 |
| |
| #define BCM4377_PCIECFG_SUBSYSTEM_CTRL 0x88 |
| |
| #define BCM4377_BAR0_FW_DOORBELL 0x140 |
| #define BCM4377_BAR0_RTI_CONTROL 0x144 |
| |
| #define BCM4377_BAR0_SLEEP_CONTROL 0x150 |
| #define BCM4377_BAR0_SLEEP_CONTROL_UNQUIESCE 0 |
| #define BCM4377_BAR0_SLEEP_CONTROL_AWAKE 2 |
| #define BCM4377_BAR0_SLEEP_CONTROL_QUIESCE 3 |
| |
| #define BCM4377_BAR0_DOORBELL 0x174 |
| #define BCM4377_BAR0_DOORBELL_VALUE GENMASK(31, 16) |
| #define BCM4377_BAR0_DOORBELL_IDX GENMASK(15, 8) |
| #define BCM4377_BAR0_DOORBELL_RING BIT(5) |
| |
| #define BCM4377_BAR0_HOST_WINDOW_LO 0x590 |
| #define BCM4377_BAR0_HOST_WINDOW_HI 0x594 |
| #define BCM4377_BAR0_HOST_WINDOW_SIZE 0x598 |
| |
| #define BCM4377_BAR2_BOOTSTAGE 0x200454 |
| |
| #define BCM4377_BAR2_FW_LO 0x200478 |
| #define BCM4377_BAR2_FW_HI 0x20047c |
| #define BCM4377_BAR2_FW_SIZE 0x200480 |
| |
| #define BCM4377_BAR2_CONTEXT_ADDR_LO 0x20048c |
| #define BCM4377_BAR2_CONTEXT_ADDR_HI 0x200450 |
| |
| #define BCM4377_BAR2_RTI_STATUS 0x20045c |
| #define BCM4377_BAR2_RTI_WINDOW_LO 0x200494 |
| #define BCM4377_BAR2_RTI_WINDOW_HI 0x200498 |
| #define BCM4377_BAR2_RTI_WINDOW_SIZE 0x20049c |
| |
| #define BCM4377_OTP_SIZE 0xe0 |
| #define BCM4377_OTP_SYS_VENDOR 0x15 |
| #define BCM4377_OTP_CIS 0x80 |
| #define BCM4377_OTP_VENDOR_HDR 0x00000008 |
| #define BCM4377_OTP_MAX_PARAM_LEN 16 |
| |
| #define BCM4377_N_TRANSFER_RINGS 9 |
| #define BCM4377_N_COMPLETION_RINGS 6 |
| |
| #define BCM4377_MAX_RING_SIZE 256 |
| |
| #define BCM4377_MSGID_GENERATION GENMASK(15, 8) |
| #define BCM4377_MSGID_ID GENMASK(7, 0) |
| |
| #define BCM4377_RING_N_ENTRIES 128 |
| |
| #define BCM4377_CONTROL_MSG_SIZE 0x34 |
| #define BCM4377_XFER_RING_MAX_INPLACE_PAYLOAD_SIZE (4 * 0xff) |
| |
| #define MAX_ACL_PAYLOAD_SIZE (HCI_MAX_FRAME_SIZE + HCI_ACL_HDR_SIZE) |
| #define MAX_SCO_PAYLOAD_SIZE (HCI_MAX_SCO_SIZE + HCI_SCO_HDR_SIZE) |
| #define MAX_EVENT_PAYLOAD_SIZE (HCI_MAX_EVENT_SIZE + HCI_EVENT_HDR_SIZE) |
| |
| enum bcm4377_otp_params_type { |
| BCM4377_OTP_BOARD_PARAMS, |
| BCM4377_OTP_CHIP_PARAMS |
| }; |
| |
| enum bcm4377_transfer_ring_id { |
| BCM4377_XFER_RING_CONTROL = 0, |
| BCM4377_XFER_RING_HCI_H2D = 1, |
| BCM4377_XFER_RING_HCI_D2H = 2, |
| BCM4377_XFER_RING_SCO_H2D = 3, |
| BCM4377_XFER_RING_SCO_D2H = 4, |
| BCM4377_XFER_RING_ACL_H2D = 5, |
| BCM4377_XFER_RING_ACL_D2H = 6, |
| }; |
| |
| enum bcm4377_completion_ring_id { |
| BCM4377_ACK_RING_CONTROL = 0, |
| BCM4377_ACK_RING_HCI_ACL = 1, |
| BCM4377_EVENT_RING_HCI_ACL = 2, |
| BCM4377_ACK_RING_SCO = 3, |
| BCM4377_EVENT_RING_SCO = 4, |
| }; |
| |
| enum bcm4377_doorbell { |
| BCM4377_DOORBELL_CONTROL = 0, |
| BCM4377_DOORBELL_HCI_H2D = 1, |
| BCM4377_DOORBELL_HCI_D2H = 2, |
| BCM4377_DOORBELL_ACL_H2D = 3, |
| BCM4377_DOORBELL_ACL_D2H = 4, |
| BCM4377_DOORBELL_SCO = 6, |
| }; |
| |
| /* |
| * Transfer ring entry |
| * |
| * flags: Flags to indicate if the payload is appended or mapped |
| * len: Payload length |
| * payload: Optional payload DMA address |
| * id: Message id to recognize the answer in the completion ring entry |
| */ |
| struct bcm4377_xfer_ring_entry { |
| #define BCM4377_XFER_RING_FLAG_PAYLOAD_MAPPED BIT(0) |
| #define BCM4377_XFER_RING_FLAG_PAYLOAD_IN_FOOTER BIT(1) |
| u8 flags; |
| __le16 len; |
| u8 _unk0; |
| __le64 payload; |
| __le16 id; |
| u8 _unk1[2]; |
| } __packed; |
| static_assert(sizeof(struct bcm4377_xfer_ring_entry) == 0x10); |
| |
| /* |
| * Completion ring entry |
| * |
| * flags: Flags to indicate if the payload is appended or mapped. If the payload |
| * is mapped it can be found in the buffer of the corresponding transfer |
| * ring message. |
| * ring_id: Transfer ring ID which required this message |
| * msg_id: Message ID specified in transfer ring entry |
| * len: Payload length |
| */ |
| struct bcm4377_completion_ring_entry { |
| u8 flags; |
| u8 _unk0; |
| __le16 ring_id; |
| __le16 msg_id; |
| __le32 len; |
| u8 _unk1[6]; |
| } __packed; |
| static_assert(sizeof(struct bcm4377_completion_ring_entry) == 0x10); |
| |
| enum bcm4377_control_message_type { |
| BCM4377_CONTROL_MSG_CREATE_XFER_RING = 1, |
| BCM4377_CONTROL_MSG_CREATE_COMPLETION_RING = 2, |
| BCM4377_CONTROL_MSG_DESTROY_XFER_RING = 3, |
| BCM4377_CONTROL_MSG_DESTROY_COMPLETION_RING = 4, |
| }; |
| |
| /* |
| * Control message used to create a completion ring |
| * |
| * msg_type: Must be BCM4377_CONTROL_MSG_CREATE_COMPLETION_RING |
| * header_size: Unknown, but probably reserved space in front of the entry |
| * footer_size: Number of 32 bit words reserved for payloads after the entry |
| * id/id_again: Completion ring index |
| * ring_iova: DMA address of the ring buffer |
| * n_elements: Number of elements inside the ring buffer |
| * msi: MSI index, doesn't work for all rings though and should be zero |
| * intmod_delay: Unknown delay |
| * intmod_bytes: Unknown |
| */ |
| struct bcm4377_create_completion_ring_msg { |
| u8 msg_type; |
| u8 header_size; |
| u8 footer_size; |
| u8 _unk0; |
| __le16 id; |
| __le16 id_again; |
| __le64 ring_iova; |
| __le16 n_elements; |
| __le32 unk; |
| u8 _unk1[6]; |
| __le16 msi; |
| __le16 intmod_delay; |
| __le32 intmod_bytes; |
| __le16 _unk2; |
| __le32 _unk3; |
| u8 _unk4[10]; |
| } __packed; |
| static_assert(sizeof(struct bcm4377_create_completion_ring_msg) == |
| BCM4377_CONTROL_MSG_SIZE); |
| |
| /* |
| * Control ring message used to destroy a completion ring |
| * |
| * msg_type: Must be BCM4377_CONTROL_MSG_DESTROY_COMPLETION_RING |
| * ring_id: Completion ring to be destroyed |
| */ |
| struct bcm4377_destroy_completion_ring_msg { |
| u8 msg_type; |
| u8 _pad0; |
| __le16 ring_id; |
| u8 _pad1[48]; |
| } __packed; |
| static_assert(sizeof(struct bcm4377_destroy_completion_ring_msg) == |
| BCM4377_CONTROL_MSG_SIZE); |
| |
| /* |
| * Control message used to create a transfer ring |
| * |
| * msg_type: Must be BCM4377_CONTROL_MSG_CREATE_XFER_RING |
| * header_size: Number of 32 bit words reserved for unknown content before the |
| * entry |
| * footer_size: Number of 32 bit words reserved for payloads after the entry |
| * ring_id/ring_id_again: Transfer ring index |
| * ring_iova: DMA address of the ring buffer |
| * n_elements: Number of elements inside the ring buffer |
| * completion_ring_id: Completion ring index for acknowledgements and events |
| * doorbell: Doorbell index used to notify device of new entries |
| * flags: Transfer ring flags |
| * - virtual: set if there is no associated shared memory and only the |
| * corresponding completion ring is used |
| * - sync: only set for the SCO rings |
| */ |
| struct bcm4377_create_transfer_ring_msg { |
| u8 msg_type; |
| u8 header_size; |
| u8 footer_size; |
| u8 _unk0; |
| __le16 ring_id; |
| __le16 ring_id_again; |
| __le64 ring_iova; |
| u8 _unk1[8]; |
| __le16 n_elements; |
| __le16 completion_ring_id; |
| __le16 doorbell; |
| #define BCM4377_XFER_RING_FLAG_VIRTUAL BIT(7) |
| #define BCM4377_XFER_RING_FLAG_SYNC BIT(8) |
| __le16 flags; |
| u8 _unk2[20]; |
| } __packed; |
| static_assert(sizeof(struct bcm4377_create_transfer_ring_msg) == |
| BCM4377_CONTROL_MSG_SIZE); |
| |
| /* |
| * Control ring message used to destroy a transfer ring |
| * |
| * msg_type: Must be BCM4377_CONTROL_MSG_DESTROY_XFER_RING |
| * ring_id: Transfer ring to be destroyed |
| */ |
| struct bcm4377_destroy_transfer_ring_msg { |
| u8 msg_type; |
| u8 _pad0; |
| __le16 ring_id; |
| u8 _pad1[48]; |
| } __packed; |
| static_assert(sizeof(struct bcm4377_destroy_transfer_ring_msg) == |
| BCM4377_CONTROL_MSG_SIZE); |
| |
| /* |
| * "Converged IPC" context struct used to make the device aware of all other |
| * shared memory structures. A pointer to this structure is configured inside a |
| * MMIO register. |
| * |
| * version: Protocol version, must be 2. |
| * size: Size of this structure, must be 0x68. |
| * enabled_caps: Enabled capabilities. Unknown bitfield but should be 2. |
| * peripheral_info_addr: DMA address for a 0x20 buffer to which the device will |
| * write unknown contents |
| * {completion,xfer}_ring_{tails,heads}_addr: DMA pointers to ring heads/tails |
| * n_completion_rings: Number of completion rings, the firmware only works if |
| * this is set to BCM4377_N_COMPLETION_RINGS. |
| * n_xfer_rings: Number of transfer rings, the firmware only works if |
| * this is set to BCM4377_N_TRANSFER_RINGS. |
| * control_completion_ring_addr: Control completion ring buffer DMA address |
| * control_xfer_ring_addr: Control transfer ring buffer DMA address |
| * control_xfer_ring_n_entries: Number of control transfer ring entries |
| * control_completion_ring_n_entries: Number of control completion ring entries |
| * control_xfer_ring_doorbell: Control transfer ring doorbell |
| * control_completion_ring_doorbell: Control completion ring doorbell, |
| * must be set to 0xffff |
| * control_xfer_ring_msi: Control completion ring MSI index, must be 0 |
| * control_completion_ring_msi: Control completion ring MSI index, must be 0. |
| * control_xfer_ring_header_size: Number of 32 bit words reserved in front of |
| * every control transfer ring entry |
| * control_xfer_ring_footer_size: Number of 32 bit words reserved after every |
| * control transfer ring entry |
| * control_completion_ring_header_size: Number of 32 bit words reserved in front |
| * of every control completion ring entry |
| * control_completion_ring_footer_size: Number of 32 bit words reserved after |
| * every control completion ring entry |
| * scratch_pad: Optional scratch pad DMA address |
| * scratch_pad_size: Scratch pad size |
| */ |
| struct bcm4377_context { |
| __le16 version; |
| __le16 size; |
| __le32 enabled_caps; |
| |
| __le64 peripheral_info_addr; |
| |
| /* ring heads and tails */ |
| __le64 completion_ring_heads_addr; |
| __le64 xfer_ring_tails_addr; |
| __le64 completion_ring_tails_addr; |
| __le64 xfer_ring_heads_addr; |
| __le16 n_completion_rings; |
| __le16 n_xfer_rings; |
| |
| /* control ring configuration */ |
| __le64 control_completion_ring_addr; |
| __le64 control_xfer_ring_addr; |
| __le16 control_xfer_ring_n_entries; |
| __le16 control_completion_ring_n_entries; |
| __le16 control_xfer_ring_doorbell; |
| __le16 control_completion_ring_doorbell; |
| __le16 control_xfer_ring_msi; |
| __le16 control_completion_ring_msi; |
| u8 control_xfer_ring_header_size; |
| u8 control_xfer_ring_footer_size; |
| u8 control_completion_ring_header_size; |
| u8 control_completion_ring_footer_size; |
| |
| __le16 _unk0; |
| __le16 _unk1; |
| |
| __le64 scratch_pad; |
| __le32 scratch_pad_size; |
| |
| __le32 _unk3; |
| } __packed; |
| static_assert(sizeof(struct bcm4377_context) == 0x68); |
| |
| #define BCM4378_CALIBRATION_CHUNK_SIZE 0xe6 |
| struct bcm4378_hci_send_calibration_cmd { |
| u8 unk; |
| __le16 blocks_left; |
| u8 data[BCM4378_CALIBRATION_CHUNK_SIZE]; |
| } __packed; |
| |
| #define BCM4378_PTB_CHUNK_SIZE 0xcf |
| struct bcm4378_hci_send_ptb_cmd { |
| __le16 blocks_left; |
| u8 data[BCM4378_PTB_CHUNK_SIZE]; |
| } __packed; |
| |
| /* |
| * Shared memory structure used to store the ring head and tail pointers. |
| */ |
| struct bcm4377_ring_state { |
| __le16 completion_ring_head[BCM4377_N_COMPLETION_RINGS]; |
| __le16 completion_ring_tail[BCM4377_N_COMPLETION_RINGS]; |
| __le16 xfer_ring_head[BCM4377_N_TRANSFER_RINGS]; |
| __le16 xfer_ring_tail[BCM4377_N_TRANSFER_RINGS]; |
| }; |
| |
| /* |
| * A transfer ring can be used in two configurations: |
| * 1) Send control or HCI messages to the device which are then acknowledged |
| * in the corresponding completion ring |
| * 2) Receiving HCI frames from the devices. In this case the transfer ring |
| * itself contains empty messages that are acknowledged once data is |
| * available from the device. If the payloads fit inside the footers |
| * of the completion ring the transfer ring can be configured to be |
| * virtual such that it has no ring buffer. |
| * |
| * ring_id: ring index hardcoded in the firmware |
| * doorbell: doorbell index to notify device of new entries |
| * payload_size: optional in-place payload size |
| * mapped_payload_size: optional out-of-place payload size |
| * completion_ring: index of corresponding completion ring |
| * n_entries: number of entries inside this ring |
| * generation: ring generation; incremented on hci_open to detect stale messages |
| * sync: set to true for SCO rings |
| * virtual: set to true if this ring has no entries and is just required to |
| * setup a corresponding completion ring for device->host messages |
| * d2h_buffers_only: set to true if this ring is only used to provide large |
| * buffers used by device->host messages in the completion |
| * ring |
| * allow_wait: allow to wait for messages to be acknowledged |
| * enabled: true once the ring has been created and can be used |
| * ring: ring buffer for entries (struct bcm4377_xfer_ring_entry) |
| * ring_dma: DMA address for ring entry buffer |
| * payloads: payload buffer for mapped_payload_size payloads |
| * payloads_dma:DMA address for payload buffer |
| * events: pointer to array of completions if waiting is allowed |
| * msgids: bitmap to keep track of used message ids |
| * lock: Spinlock to protect access to ring structurs used in the irq handler |
| */ |
| struct bcm4377_transfer_ring { |
| enum bcm4377_transfer_ring_id ring_id; |
| enum bcm4377_doorbell doorbell; |
| size_t payload_size; |
| size_t mapped_payload_size; |
| u8 completion_ring; |
| u16 n_entries; |
| u8 generation; |
| |
| bool sync; |
| bool virtual; |
| bool d2h_buffers_only; |
| bool allow_wait; |
| bool enabled; |
| |
| void *ring; |
| dma_addr_t ring_dma; |
| |
| void *payloads; |
| dma_addr_t payloads_dma; |
| |
| struct completion **events; |
| DECLARE_BITMAP(msgids, BCM4377_MAX_RING_SIZE); |
| spinlock_t lock; |
| }; |
| |
| /* |
| * A completion ring can be either used to either acknowledge messages sent in |
| * the corresponding transfer ring or to receive messages associated with the |
| * transfer ring. When used to receive messages the transfer ring either |
| * has no ring buffer and is only advanced ("virtual transfer ring") or it |
| * only contains empty DMA buffers to be used for the payloads. |
| * |
| * ring_id: completion ring id, hardcoded in firmware |
| * payload_size: optional payload size after each entry |
| * delay: unknown delay |
| * n_entries: number of entries in this ring |
| * enabled: true once the ring has been created and can be used |
| * ring: ring buffer for entries (struct bcm4377_completion_ring_entry) |
| * ring_dma: DMA address of ring buffer |
| * transfer_rings: bitmap of corresponding transfer ring ids |
| */ |
| struct bcm4377_completion_ring { |
| enum bcm4377_completion_ring_id ring_id; |
| u16 payload_size; |
| u16 delay; |
| u16 n_entries; |
| bool enabled; |
| |
| void *ring; |
| dma_addr_t ring_dma; |
| |
| unsigned long transfer_rings; |
| }; |
| |
| struct bcm4377_data; |
| |
| /* |
| * Chip-specific configuration struct |
| * |
| * id: Chip id (e.g. 0x4377 for BCM4377) |
| * otp_offset: Offset to the start of the OTP inside BAR0 |
| * bar0_window1: Backplane address mapped to the first window in BAR0 |
| * bar0_window2: Backplane address mapped to the second window in BAR0 |
| * bar0_core2_window2: Optional backplane address mapped to the second core's |
| * second window in BAR0 |
| * has_bar0_core2_window2: Set to true if this chip requires the second core's |
| * second window to be configured |
| * clear_pciecfg_subsystem_ctrl_bit19: Set to true if bit 19 in the |
| * vendor-specific subsystem control |
| * register has to be cleared |
| * disable_aspm: Set to true if ASPM must be disabled due to hardware errata |
| * broken_ext_scan: Set to true if the chip erroneously claims to support |
| * extended scanning |
| * broken_mws_transport_config: Set to true if the chip erroneously claims to |
| * support MWS Transport Configuration |
| * send_calibration: Optional callback to send calibration data |
| * send_ptb: Callback to send "PTB" regulatory/calibration data |
| */ |
| struct bcm4377_hw { |
| unsigned int id; |
| |
| u32 otp_offset; |
| |
| u32 bar0_window1; |
| u32 bar0_window2; |
| u32 bar0_core2_window2; |
| |
| unsigned long has_bar0_core2_window2 : 1; |
| unsigned long clear_pciecfg_subsystem_ctrl_bit19 : 1; |
| unsigned long disable_aspm : 1; |
| unsigned long broken_ext_scan : 1; |
| unsigned long broken_mws_transport_config : 1; |
| unsigned long broken_le_coded : 1; |
| |
| int (*send_calibration)(struct bcm4377_data *bcm4377); |
| int (*send_ptb)(struct bcm4377_data *bcm4377, |
| const struct firmware *fw); |
| }; |
| |
| static const struct bcm4377_hw bcm4377_hw_variants[]; |
| static const struct dmi_system_id bcm4377_dmi_board_table[]; |
| |
| /* |
| * Private struct associated with each device containing global state |
| * |
| * pdev: Pointer to associated struct pci_dev |
| * hdev: Pointer to associated strucy hci_dev |
| * bar0: iomem pointing to BAR0 |
| * bar1: iomem pointing to BAR2 |
| * bootstage: Current value of the bootstage |
| * rti_status: Current "RTI" status value |
| * hw: Pointer to chip-specific struct bcm4377_hw |
| * taurus_cal_blob: "Taurus" calibration blob used for some chips |
| * taurus_cal_size: "Taurus" calibration blob size |
| * taurus_beamforming_cal_blob: "Taurus" beamforming calibration blob used for |
| * some chips |
| * taurus_beamforming_cal_size: "Taurus" beamforming calibration blob size |
| * stepping: Chip stepping read from OTP; used for firmware selection |
| * vendor: Antenna vendor read from OTP; used for firmware selection |
| * board_type: Board type from FDT or DMI match; used for firmware selection |
| * event: Event for changed bootstage or rti_status; used for booting firmware |
| * ctx: "Converged IPC" context |
| * ctx_dma: "Converged IPC" context DMA address |
| * ring_state: Shared memory buffer containing ring head and tail indexes |
| * ring_state_dma: DMA address for ring_state |
| * {control,hci_acl,sco}_ack_ring: Completion rings used to acknowledge messages |
| * {hci_acl,sco}_event_ring: Completion rings used for device->host messages |
| * control_h2d_ring: Transfer ring used for control messages |
| * {hci,sco,acl}_h2d_ring: Transfer ring used to transfer HCI frames |
| * {hci,sco,acl}_d2h_ring: Transfer ring used to receive HCI frames in the |
| * corresponding completion ring |
| */ |
| struct bcm4377_data { |
| struct pci_dev *pdev; |
| struct hci_dev *hdev; |
| |
| void __iomem *bar0; |
| void __iomem *bar2; |
| |
| u32 bootstage; |
| u32 rti_status; |
| |
| const struct bcm4377_hw *hw; |
| |
| const void *taurus_cal_blob; |
| int taurus_cal_size; |
| const void *taurus_beamforming_cal_blob; |
| int taurus_beamforming_cal_size; |
| |
| char stepping[BCM4377_OTP_MAX_PARAM_LEN]; |
| char vendor[BCM4377_OTP_MAX_PARAM_LEN]; |
| const char *board_type; |
| |
| struct completion event; |
| |
| struct bcm4377_context *ctx; |
| dma_addr_t ctx_dma; |
| |
| struct bcm4377_ring_state *ring_state; |
| dma_addr_t ring_state_dma; |
| |
| /* |
| * The HCI and ACL rings have to be merged because this structure is |
| * hardcoded in the firmware. |
| */ |
| struct bcm4377_completion_ring control_ack_ring; |
| struct bcm4377_completion_ring hci_acl_ack_ring; |
| struct bcm4377_completion_ring hci_acl_event_ring; |
| struct bcm4377_completion_ring sco_ack_ring; |
| struct bcm4377_completion_ring sco_event_ring; |
| |
| struct bcm4377_transfer_ring control_h2d_ring; |
| struct bcm4377_transfer_ring hci_h2d_ring; |
| struct bcm4377_transfer_ring hci_d2h_ring; |
| struct bcm4377_transfer_ring sco_h2d_ring; |
| struct bcm4377_transfer_ring sco_d2h_ring; |
| struct bcm4377_transfer_ring acl_h2d_ring; |
| struct bcm4377_transfer_ring acl_d2h_ring; |
| }; |
| |
| static void bcm4377_ring_doorbell(struct bcm4377_data *bcm4377, u8 doorbell, |
| u16 val) |
| { |
| u32 db = 0; |
| |
| db |= FIELD_PREP(BCM4377_BAR0_DOORBELL_VALUE, val); |
| db |= FIELD_PREP(BCM4377_BAR0_DOORBELL_IDX, doorbell); |
| db |= BCM4377_BAR0_DOORBELL_RING; |
| |
| dev_dbg(&bcm4377->pdev->dev, "write %d to doorbell #%d (0x%x)\n", val, |
| doorbell, db); |
| iowrite32(db, bcm4377->bar0 + BCM4377_BAR0_DOORBELL); |
| } |
| |
| static int bcm4377_extract_msgid(struct bcm4377_data *bcm4377, |
| struct bcm4377_transfer_ring *ring, |
| u16 raw_msgid, u8 *msgid) |
| { |
| u8 generation = FIELD_GET(BCM4377_MSGID_GENERATION, raw_msgid); |
| *msgid = FIELD_GET(BCM4377_MSGID_ID, raw_msgid); |
| |
| if (generation != ring->generation) { |
| dev_warn( |
| &bcm4377->pdev->dev, |
| "invalid message generation %d should be %d in entry for ring %d\n", |
| generation, ring->generation, ring->ring_id); |
| return -EINVAL; |
| } |
| |
| if (*msgid >= ring->n_entries) { |
| dev_warn(&bcm4377->pdev->dev, |
| "invalid message id in entry for ring %d: %d > %d\n", |
| ring->ring_id, *msgid, ring->n_entries); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static void bcm4377_handle_event(struct bcm4377_data *bcm4377, |
| struct bcm4377_transfer_ring *ring, |
| u16 raw_msgid, u8 entry_flags, u8 type, |
| void *payload, size_t len) |
| { |
| struct sk_buff *skb; |
| u16 head; |
| u8 msgid; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ring->lock, flags); |
| if (!ring->enabled) { |
| dev_warn(&bcm4377->pdev->dev, |
| "event for disabled transfer ring %d\n", |
| ring->ring_id); |
| goto out; |
| } |
| |
| if (ring->d2h_buffers_only && |
| entry_flags & BCM4377_XFER_RING_FLAG_PAYLOAD_MAPPED) { |
| if (bcm4377_extract_msgid(bcm4377, ring, raw_msgid, &msgid)) |
| goto out; |
| |
| if (len > ring->mapped_payload_size) { |
| dev_warn( |
| &bcm4377->pdev->dev, |
| "invalid payload len in event for ring %d: %zu > %zu\n", |
| ring->ring_id, len, ring->mapped_payload_size); |
| goto out; |
| } |
| |
| payload = ring->payloads + msgid * ring->mapped_payload_size; |
| } |
| |
| skb = bt_skb_alloc(len, GFP_ATOMIC); |
| if (!skb) |
| goto out; |
| |
| memcpy(skb_put(skb, len), payload, len); |
| hci_skb_pkt_type(skb) = type; |
| hci_recv_frame(bcm4377->hdev, skb); |
| |
| out: |
| head = le16_to_cpu(bcm4377->ring_state->xfer_ring_head[ring->ring_id]); |
| head = (head + 1) % ring->n_entries; |
| bcm4377->ring_state->xfer_ring_head[ring->ring_id] = cpu_to_le16(head); |
| |
| bcm4377_ring_doorbell(bcm4377, ring->doorbell, head); |
| |
| spin_unlock_irqrestore(&ring->lock, flags); |
| } |
| |
| static void bcm4377_handle_ack(struct bcm4377_data *bcm4377, |
| struct bcm4377_transfer_ring *ring, |
| u16 raw_msgid) |
| { |
| unsigned long flags; |
| u8 msgid; |
| |
| spin_lock_irqsave(&ring->lock, flags); |
| |
| if (bcm4377_extract_msgid(bcm4377, ring, raw_msgid, &msgid)) |
| goto unlock; |
| |
| if (!test_bit(msgid, ring->msgids)) { |
| dev_warn( |
| &bcm4377->pdev->dev, |
| "invalid message id in ack for ring %d: %d is not used\n", |
| ring->ring_id, msgid); |
| goto unlock; |
| } |
| |
| if (ring->allow_wait && ring->events[msgid]) { |
| complete(ring->events[msgid]); |
| ring->events[msgid] = NULL; |
| } |
| |
| bitmap_release_region(ring->msgids, msgid, ring->n_entries); |
| |
| unlock: |
| spin_unlock_irqrestore(&ring->lock, flags); |
| } |
| |
| static void bcm4377_handle_completion(struct bcm4377_data *bcm4377, |
| struct bcm4377_completion_ring *ring, |
| u16 pos) |
| { |
| struct bcm4377_completion_ring_entry *entry; |
| u16 msg_id, transfer_ring; |
| size_t entry_size, data_len; |
| void *data; |
| |
| if (pos >= ring->n_entries) { |
| dev_warn(&bcm4377->pdev->dev, |
| "invalid offset %d for completion ring %d\n", pos, |
| ring->ring_id); |
| return; |
| } |
| |
| entry_size = sizeof(*entry) + ring->payload_size; |
| entry = ring->ring + pos * entry_size; |
| data = ring->ring + pos * entry_size + sizeof(*entry); |
| data_len = le32_to_cpu(entry->len); |
| msg_id = le16_to_cpu(entry->msg_id); |
| transfer_ring = le16_to_cpu(entry->ring_id); |
| |
| if ((ring->transfer_rings & BIT(transfer_ring)) == 0) { |
| dev_warn( |
| &bcm4377->pdev->dev, |
| "invalid entry at offset %d for transfer ring %d in completion ring %d\n", |
| pos, transfer_ring, ring->ring_id); |
| return; |
| } |
| |
| dev_dbg(&bcm4377->pdev->dev, |
| "entry in completion ring %d for transfer ring %d with msg_id %d\n", |
| ring->ring_id, transfer_ring, msg_id); |
| |
| switch (transfer_ring) { |
| case BCM4377_XFER_RING_CONTROL: |
| bcm4377_handle_ack(bcm4377, &bcm4377->control_h2d_ring, msg_id); |
| break; |
| case BCM4377_XFER_RING_HCI_H2D: |
| bcm4377_handle_ack(bcm4377, &bcm4377->hci_h2d_ring, msg_id); |
| break; |
| case BCM4377_XFER_RING_SCO_H2D: |
| bcm4377_handle_ack(bcm4377, &bcm4377->sco_h2d_ring, msg_id); |
| break; |
| case BCM4377_XFER_RING_ACL_H2D: |
| bcm4377_handle_ack(bcm4377, &bcm4377->acl_h2d_ring, msg_id); |
| break; |
| |
| case BCM4377_XFER_RING_HCI_D2H: |
| bcm4377_handle_event(bcm4377, &bcm4377->hci_d2h_ring, msg_id, |
| entry->flags, HCI_EVENT_PKT, data, |
| data_len); |
| break; |
| case BCM4377_XFER_RING_SCO_D2H: |
| bcm4377_handle_event(bcm4377, &bcm4377->sco_d2h_ring, msg_id, |
| entry->flags, HCI_SCODATA_PKT, data, |
| data_len); |
| break; |
| case BCM4377_XFER_RING_ACL_D2H: |
| bcm4377_handle_event(bcm4377, &bcm4377->acl_d2h_ring, msg_id, |
| entry->flags, HCI_ACLDATA_PKT, data, |
| data_len); |
| break; |
| |
| default: |
| dev_warn( |
| &bcm4377->pdev->dev, |
| "entry in completion ring %d for unknown transfer ring %d with msg_id %d\n", |
| ring->ring_id, transfer_ring, msg_id); |
| } |
| } |
| |
| static void bcm4377_poll_completion_ring(struct bcm4377_data *bcm4377, |
| struct bcm4377_completion_ring *ring) |
| { |
| u16 tail; |
| __le16 *heads = bcm4377->ring_state->completion_ring_head; |
| __le16 *tails = bcm4377->ring_state->completion_ring_tail; |
| |
| if (!ring->enabled) |
| return; |
| |
| tail = le16_to_cpu(tails[ring->ring_id]); |
| dev_dbg(&bcm4377->pdev->dev, |
| "completion ring #%d: head: %d, tail: %d\n", ring->ring_id, |
| le16_to_cpu(heads[ring->ring_id]), tail); |
| |
| while (tail != le16_to_cpu(READ_ONCE(heads[ring->ring_id]))) { |
| /* |
| * ensure the CPU doesn't speculate through the comparison. |
| * otherwise it might already read the (empty) queue entry |
| * before the updated head has been loaded and checked. |
| */ |
| dma_rmb(); |
| |
| bcm4377_handle_completion(bcm4377, ring, tail); |
| |
| tail = (tail + 1) % ring->n_entries; |
| tails[ring->ring_id] = cpu_to_le16(tail); |
| } |
| } |
| |
| static irqreturn_t bcm4377_irq(int irq, void *data) |
| { |
| struct bcm4377_data *bcm4377 = data; |
| u32 bootstage, rti_status; |
| |
| bootstage = ioread32(bcm4377->bar2 + BCM4377_BAR2_BOOTSTAGE); |
| rti_status = ioread32(bcm4377->bar2 + BCM4377_BAR2_RTI_STATUS); |
| |
| if (bootstage != bcm4377->bootstage || |
| rti_status != bcm4377->rti_status) { |
| dev_dbg(&bcm4377->pdev->dev, |
| "bootstage = %d -> %d, rti state = %d -> %d\n", |
| bcm4377->bootstage, bootstage, bcm4377->rti_status, |
| rti_status); |
| complete(&bcm4377->event); |
| bcm4377->bootstage = bootstage; |
| bcm4377->rti_status = rti_status; |
| } |
| |
| if (rti_status > 2) |
| dev_err(&bcm4377->pdev->dev, "RTI status is %d\n", rti_status); |
| |
| bcm4377_poll_completion_ring(bcm4377, &bcm4377->control_ack_ring); |
| bcm4377_poll_completion_ring(bcm4377, &bcm4377->hci_acl_event_ring); |
| bcm4377_poll_completion_ring(bcm4377, &bcm4377->hci_acl_ack_ring); |
| bcm4377_poll_completion_ring(bcm4377, &bcm4377->sco_ack_ring); |
| bcm4377_poll_completion_ring(bcm4377, &bcm4377->sco_event_ring); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int bcm4377_enqueue(struct bcm4377_data *bcm4377, |
| struct bcm4377_transfer_ring *ring, void *data, |
| size_t len, bool wait) |
| { |
| unsigned long flags; |
| struct bcm4377_xfer_ring_entry *entry; |
| void *payload; |
| size_t offset; |
| u16 head, tail, new_head; |
| u16 raw_msgid; |
| int ret, msgid; |
| DECLARE_COMPLETION_ONSTACK(event); |
| |
| if (len > ring->payload_size && len > ring->mapped_payload_size) { |
| dev_warn( |
| &bcm4377->pdev->dev, |
| "payload len %zu is too large for ring %d (max is %zu or %zu)\n", |
| len, ring->ring_id, ring->payload_size, |
| ring->mapped_payload_size); |
| return -EINVAL; |
| } |
| if (wait && !ring->allow_wait) |
| return -EINVAL; |
| if (ring->virtual) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&ring->lock, flags); |
| |
| head = le16_to_cpu(bcm4377->ring_state->xfer_ring_head[ring->ring_id]); |
| tail = le16_to_cpu(bcm4377->ring_state->xfer_ring_tail[ring->ring_id]); |
| |
| new_head = (head + 1) % ring->n_entries; |
| |
| if (new_head == tail) { |
| dev_warn(&bcm4377->pdev->dev, |
| "can't send message because ring %d is full\n", |
| ring->ring_id); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| msgid = bitmap_find_free_region(ring->msgids, ring->n_entries, 0); |
| if (msgid < 0) { |
| dev_warn(&bcm4377->pdev->dev, |
| "can't find message id for ring %d\n", ring->ring_id); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| raw_msgid = FIELD_PREP(BCM4377_MSGID_GENERATION, ring->generation); |
| raw_msgid |= FIELD_PREP(BCM4377_MSGID_ID, msgid); |
| |
| offset = head * (sizeof(*entry) + ring->payload_size); |
| entry = ring->ring + offset; |
| |
| memset(entry, 0, sizeof(*entry)); |
| entry->id = cpu_to_le16(raw_msgid); |
| entry->len = cpu_to_le16(len); |
| |
| if (len <= ring->payload_size) { |
| entry->flags = BCM4377_XFER_RING_FLAG_PAYLOAD_IN_FOOTER; |
| payload = ring->ring + offset + sizeof(*entry); |
| } else { |
| entry->flags = BCM4377_XFER_RING_FLAG_PAYLOAD_MAPPED; |
| entry->payload = cpu_to_le64(ring->payloads_dma + |
| msgid * ring->mapped_payload_size); |
| payload = ring->payloads + msgid * ring->mapped_payload_size; |
| } |
| |
| memcpy(payload, data, len); |
| |
| if (wait) |
| ring->events[msgid] = &event; |
| |
| /* |
| * The 4377 chips stop responding to any commands as soon as they |
| * have been idle for a while. Poking the sleep control register here |
| * makes them come alive again. |
| */ |
| iowrite32(BCM4377_BAR0_SLEEP_CONTROL_AWAKE, |
| bcm4377->bar0 + BCM4377_BAR0_SLEEP_CONTROL); |
| |
| dev_dbg(&bcm4377->pdev->dev, |
| "updating head for transfer queue #%d to %d\n", ring->ring_id, |
| new_head); |
| bcm4377->ring_state->xfer_ring_head[ring->ring_id] = |
| cpu_to_le16(new_head); |
| |
| if (!ring->sync) |
| bcm4377_ring_doorbell(bcm4377, ring->doorbell, new_head); |
| ret = 0; |
| |
| out: |
| spin_unlock_irqrestore(&ring->lock, flags); |
| |
| if (ret == 0 && wait) { |
| ret = wait_for_completion_interruptible_timeout( |
| &event, BCM4377_TIMEOUT); |
| if (ret == 0) |
| ret = -ETIMEDOUT; |
| else if (ret > 0) |
| ret = 0; |
| |
| spin_lock_irqsave(&ring->lock, flags); |
| ring->events[msgid] = NULL; |
| spin_unlock_irqrestore(&ring->lock, flags); |
| } |
| |
| return ret; |
| } |
| |
| static int bcm4377_create_completion_ring(struct bcm4377_data *bcm4377, |
| struct bcm4377_completion_ring *ring) |
| { |
| struct bcm4377_create_completion_ring_msg msg; |
| int ret; |
| |
| if (ring->enabled) { |
| dev_warn(&bcm4377->pdev->dev, |
| "completion ring %d already enabled\n", ring->ring_id); |
| return 0; |
| } |
| |
| memset(ring->ring, 0, |
| ring->n_entries * (sizeof(struct bcm4377_completion_ring_entry) + |
| ring->payload_size)); |
| memset(&msg, 0, sizeof(msg)); |
| msg.msg_type = BCM4377_CONTROL_MSG_CREATE_COMPLETION_RING; |
| msg.id = cpu_to_le16(ring->ring_id); |
| msg.id_again = cpu_to_le16(ring->ring_id); |
| msg.ring_iova = cpu_to_le64(ring->ring_dma); |
| msg.n_elements = cpu_to_le16(ring->n_entries); |
| msg.intmod_bytes = cpu_to_le32(0xffffffff); |
| msg.unk = cpu_to_le32(0xffffffff); |
| msg.intmod_delay = cpu_to_le16(ring->delay); |
| msg.footer_size = ring->payload_size / 4; |
| |
| ret = bcm4377_enqueue(bcm4377, &bcm4377->control_h2d_ring, &msg, |
| sizeof(msg), true); |
| if (!ret) |
| ring->enabled = true; |
| |
| return ret; |
| } |
| |
| static int bcm4377_destroy_completion_ring(struct bcm4377_data *bcm4377, |
| struct bcm4377_completion_ring *ring) |
| { |
| struct bcm4377_destroy_completion_ring_msg msg; |
| int ret; |
| |
| memset(&msg, 0, sizeof(msg)); |
| msg.msg_type = BCM4377_CONTROL_MSG_DESTROY_COMPLETION_RING; |
| msg.ring_id = cpu_to_le16(ring->ring_id); |
| |
| ret = bcm4377_enqueue(bcm4377, &bcm4377->control_h2d_ring, &msg, |
| sizeof(msg), true); |
| if (ret) |
| dev_warn(&bcm4377->pdev->dev, |
| "failed to destroy completion ring %d\n", |
| ring->ring_id); |
| |
| ring->enabled = false; |
| return ret; |
| } |
| |
| static int bcm4377_create_transfer_ring(struct bcm4377_data *bcm4377, |
| struct bcm4377_transfer_ring *ring) |
| { |
| struct bcm4377_create_transfer_ring_msg msg; |
| u16 flags = 0; |
| int ret, i; |
| unsigned long spinlock_flags; |
| |
| if (ring->virtual) |
| flags |= BCM4377_XFER_RING_FLAG_VIRTUAL; |
| if (ring->sync) |
| flags |= BCM4377_XFER_RING_FLAG_SYNC; |
| |
| spin_lock_irqsave(&ring->lock, spinlock_flags); |
| memset(&msg, 0, sizeof(msg)); |
| msg.msg_type = BCM4377_CONTROL_MSG_CREATE_XFER_RING; |
| msg.ring_id = cpu_to_le16(ring->ring_id); |
| msg.ring_id_again = cpu_to_le16(ring->ring_id); |
| msg.ring_iova = cpu_to_le64(ring->ring_dma); |
| msg.n_elements = cpu_to_le16(ring->n_entries); |
| msg.completion_ring_id = cpu_to_le16(ring->completion_ring); |
| msg.doorbell = cpu_to_le16(ring->doorbell); |
| msg.flags = cpu_to_le16(flags); |
| msg.footer_size = ring->payload_size / 4; |
| |
| bcm4377->ring_state->xfer_ring_head[ring->ring_id] = 0; |
| bcm4377->ring_state->xfer_ring_tail[ring->ring_id] = 0; |
| ring->generation++; |
| spin_unlock_irqrestore(&ring->lock, spinlock_flags); |
| |
| ret = bcm4377_enqueue(bcm4377, &bcm4377->control_h2d_ring, &msg, |
| sizeof(msg), true); |
| |
| spin_lock_irqsave(&ring->lock, spinlock_flags); |
| |
| if (ring->d2h_buffers_only) { |
| for (i = 0; i < ring->n_entries; ++i) { |
| struct bcm4377_xfer_ring_entry *entry = |
| ring->ring + i * sizeof(*entry); |
| u16 raw_msgid = FIELD_PREP(BCM4377_MSGID_GENERATION, |
| ring->generation); |
| raw_msgid |= FIELD_PREP(BCM4377_MSGID_ID, i); |
| |
| memset(entry, 0, sizeof(*entry)); |
| entry->id = cpu_to_le16(raw_msgid); |
| entry->len = cpu_to_le16(ring->mapped_payload_size); |
| entry->flags = BCM4377_XFER_RING_FLAG_PAYLOAD_MAPPED; |
| entry->payload = |
| cpu_to_le64(ring->payloads_dma + |
| i * ring->mapped_payload_size); |
| } |
| } |
| |
| /* |
| * send some messages if this is a device->host ring to allow the device |
| * to reply by acknowledging them in the completion ring |
| */ |
| if (ring->virtual || ring->d2h_buffers_only) { |
| bcm4377->ring_state->xfer_ring_head[ring->ring_id] = |
| cpu_to_le16(0xf); |
| bcm4377_ring_doorbell(bcm4377, ring->doorbell, 0xf); |
| } |
| |
| ring->enabled = true; |
| spin_unlock_irqrestore(&ring->lock, spinlock_flags); |
| |
| return ret; |
| } |
| |
| static int bcm4377_destroy_transfer_ring(struct bcm4377_data *bcm4377, |
| struct bcm4377_transfer_ring *ring) |
| { |
| struct bcm4377_destroy_transfer_ring_msg msg; |
| int ret; |
| |
| memset(&msg, 0, sizeof(msg)); |
| msg.msg_type = BCM4377_CONTROL_MSG_DESTROY_XFER_RING; |
| msg.ring_id = cpu_to_le16(ring->ring_id); |
| |
| ret = bcm4377_enqueue(bcm4377, &bcm4377->control_h2d_ring, &msg, |
| sizeof(msg), true); |
| if (ret) |
| dev_warn(&bcm4377->pdev->dev, |
| "failed to destroy transfer ring %d\n", ring->ring_id); |
| |
| ring->enabled = false; |
| return ret; |
| } |
| |
| static int __bcm4378_send_calibration_chunk(struct bcm4377_data *bcm4377, |
| const void *data, size_t data_len, |
| u16 blocks_left) |
| { |
| struct bcm4378_hci_send_calibration_cmd cmd; |
| struct sk_buff *skb; |
| |
| if (data_len > sizeof(cmd.data)) |
| return -EINVAL; |
| |
| memset(&cmd, 0, sizeof(cmd)); |
| cmd.unk = 0x03; |
| cmd.blocks_left = cpu_to_le16(blocks_left); |
| memcpy(cmd.data, data, data_len); |
| |
| skb = __hci_cmd_sync(bcm4377->hdev, 0xfd97, sizeof(cmd), &cmd, |
| HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) |
| return PTR_ERR(skb); |
| |
| kfree_skb(skb); |
| return 0; |
| } |
| |
| static int __bcm4378_send_calibration(struct bcm4377_data *bcm4377, |
| const void *data, size_t data_size) |
| { |
| int ret; |
| size_t i, left, transfer_len; |
| size_t blocks = |
| DIV_ROUND_UP(data_size, (size_t)BCM4378_CALIBRATION_CHUNK_SIZE); |
| |
| if (!data) { |
| dev_err(&bcm4377->pdev->dev, |
| "no calibration data available.\n"); |
| return -ENOENT; |
| } |
| |
| for (i = 0, left = data_size; i < blocks; ++i, left -= transfer_len) { |
| transfer_len = |
| min_t(size_t, left, BCM4378_CALIBRATION_CHUNK_SIZE); |
| |
| ret = __bcm4378_send_calibration_chunk( |
| bcm4377, data + i * BCM4378_CALIBRATION_CHUNK_SIZE, |
| transfer_len, blocks - i - 1); |
| if (ret) { |
| dev_err(&bcm4377->pdev->dev, |
| "send calibration chunk failed with %d\n", ret); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int bcm4378_send_calibration(struct bcm4377_data *bcm4377) |
| { |
| if ((strcmp(bcm4377->stepping, "b1") == 0) || |
| strcmp(bcm4377->stepping, "b3") == 0) |
| return __bcm4378_send_calibration( |
| bcm4377, bcm4377->taurus_beamforming_cal_blob, |
| bcm4377->taurus_beamforming_cal_size); |
| else |
| return __bcm4378_send_calibration(bcm4377, |
| bcm4377->taurus_cal_blob, |
| bcm4377->taurus_cal_size); |
| } |
| |
| static int bcm4387_send_calibration(struct bcm4377_data *bcm4377) |
| { |
| if (strcmp(bcm4377->stepping, "c2") == 0) |
| return __bcm4378_send_calibration( |
| bcm4377, bcm4377->taurus_beamforming_cal_blob, |
| bcm4377->taurus_beamforming_cal_size); |
| else |
| return __bcm4378_send_calibration(bcm4377, |
| bcm4377->taurus_cal_blob, |
| bcm4377->taurus_cal_size); |
| } |
| |
| static const struct firmware *bcm4377_request_blob(struct bcm4377_data *bcm4377, |
| const char *suffix) |
| { |
| const struct firmware *fw; |
| char name0[64], name1[64]; |
| int ret; |
| |
| snprintf(name0, sizeof(name0), "brcm/brcmbt%04x%s-%s-%s.%s", |
| bcm4377->hw->id, bcm4377->stepping, bcm4377->board_type, |
| bcm4377->vendor, suffix); |
| snprintf(name1, sizeof(name1), "brcm/brcmbt%04x%s-%s.%s", |
| bcm4377->hw->id, bcm4377->stepping, bcm4377->board_type, |
| suffix); |
| dev_dbg(&bcm4377->pdev->dev, "Trying to load firmware: '%s' or '%s'\n", |
| name0, name1); |
| |
| ret = firmware_request_nowarn(&fw, name0, &bcm4377->pdev->dev); |
| if (!ret) |
| return fw; |
| ret = firmware_request_nowarn(&fw, name1, &bcm4377->pdev->dev); |
| if (!ret) |
| return fw; |
| |
| dev_err(&bcm4377->pdev->dev, |
| "Unable to load firmware; tried '%s' and '%s'\n", name0, name1); |
| return NULL; |
| } |
| |
| static int bcm4377_send_ptb(struct bcm4377_data *bcm4377, |
| const struct firmware *fw) |
| { |
| struct sk_buff *skb; |
| |
| skb = __hci_cmd_sync(bcm4377->hdev, 0xfd98, fw->size, fw->data, |
| HCI_INIT_TIMEOUT); |
| /* |
| * This command seems to always fail on more recent firmware versions |
| * (even in traces taken from the macOS driver). It's unclear why this |
| * happens but because the PTB file contains calibration and/or |
| * regulatory data and may be required on older firmware we still try to |
| * send it here just in case and just ignore if it fails. |
| */ |
| if (!IS_ERR(skb)) |
| kfree_skb(skb); |
| return 0; |
| } |
| |
| static int bcm4378_send_ptb_chunk(struct bcm4377_data *bcm4377, |
| const void *data, size_t data_len, |
| u16 blocks_left) |
| { |
| struct bcm4378_hci_send_ptb_cmd cmd; |
| struct sk_buff *skb; |
| |
| if (data_len > BCM4378_PTB_CHUNK_SIZE) |
| return -EINVAL; |
| |
| memset(&cmd, 0, sizeof(cmd)); |
| cmd.blocks_left = cpu_to_le16(blocks_left); |
| memcpy(cmd.data, data, data_len); |
| |
| skb = __hci_cmd_sync(bcm4377->hdev, 0xfe0d, sizeof(cmd), &cmd, |
| HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) |
| return PTR_ERR(skb); |
| |
| kfree_skb(skb); |
| return 0; |
| } |
| |
| static int bcm4378_send_ptb(struct bcm4377_data *bcm4377, |
| const struct firmware *fw) |
| { |
| size_t chunks = DIV_ROUND_UP(fw->size, (size_t)BCM4378_PTB_CHUNK_SIZE); |
| size_t i, left, transfer_len; |
| int ret; |
| |
| for (i = 0, left = fw->size; i < chunks; ++i, left -= transfer_len) { |
| transfer_len = min_t(size_t, left, BCM4378_PTB_CHUNK_SIZE); |
| |
| dev_dbg(&bcm4377->pdev->dev, "sending ptb chunk %zu/%zu\n", |
| i + 1, chunks); |
| ret = bcm4378_send_ptb_chunk( |
| bcm4377, fw->data + i * BCM4378_PTB_CHUNK_SIZE, |
| transfer_len, chunks - i - 1); |
| if (ret) { |
| dev_err(&bcm4377->pdev->dev, |
| "sending ptb chunk %zu failed (%d)", i, ret); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int bcm4377_hci_open(struct hci_dev *hdev) |
| { |
| struct bcm4377_data *bcm4377 = hci_get_drvdata(hdev); |
| int ret; |
| |
| dev_dbg(&bcm4377->pdev->dev, "creating rings\n"); |
| |
| ret = bcm4377_create_completion_ring(bcm4377, |
| &bcm4377->hci_acl_ack_ring); |
| if (ret) |
| return ret; |
| ret = bcm4377_create_completion_ring(bcm4377, |
| &bcm4377->hci_acl_event_ring); |
| if (ret) |
| goto destroy_hci_acl_ack; |
| ret = bcm4377_create_completion_ring(bcm4377, &bcm4377->sco_ack_ring); |
| if (ret) |
| goto destroy_hci_acl_event; |
| ret = bcm4377_create_completion_ring(bcm4377, &bcm4377->sco_event_ring); |
| if (ret) |
| goto destroy_sco_ack; |
| dev_dbg(&bcm4377->pdev->dev, |
| "all completion rings successfully created!\n"); |
| |
| ret = bcm4377_create_transfer_ring(bcm4377, &bcm4377->hci_h2d_ring); |
| if (ret) |
| goto destroy_sco_event; |
| ret = bcm4377_create_transfer_ring(bcm4377, &bcm4377->hci_d2h_ring); |
| if (ret) |
| goto destroy_hci_h2d; |
| ret = bcm4377_create_transfer_ring(bcm4377, &bcm4377->sco_h2d_ring); |
| if (ret) |
| goto destroy_hci_d2h; |
| ret = bcm4377_create_transfer_ring(bcm4377, &bcm4377->sco_d2h_ring); |
| if (ret) |
| goto destroy_sco_h2d; |
| ret = bcm4377_create_transfer_ring(bcm4377, &bcm4377->acl_h2d_ring); |
| if (ret) |
| goto destroy_sco_d2h; |
| ret = bcm4377_create_transfer_ring(bcm4377, &bcm4377->acl_d2h_ring); |
| if (ret) |
| goto destroy_acl_h2d; |
| dev_dbg(&bcm4377->pdev->dev, |
| "all transfer rings successfully created!\n"); |
| |
| return 0; |
| |
| destroy_acl_h2d: |
| bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->acl_h2d_ring); |
| destroy_sco_d2h: |
| bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->sco_d2h_ring); |
| destroy_sco_h2d: |
| bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->sco_h2d_ring); |
| destroy_hci_d2h: |
| bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->hci_h2d_ring); |
| destroy_hci_h2d: |
| bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->hci_d2h_ring); |
| destroy_sco_event: |
| bcm4377_destroy_completion_ring(bcm4377, &bcm4377->sco_event_ring); |
| destroy_sco_ack: |
| bcm4377_destroy_completion_ring(bcm4377, &bcm4377->sco_ack_ring); |
| destroy_hci_acl_event: |
| bcm4377_destroy_completion_ring(bcm4377, &bcm4377->hci_acl_event_ring); |
| destroy_hci_acl_ack: |
| bcm4377_destroy_completion_ring(bcm4377, &bcm4377->hci_acl_ack_ring); |
| |
| dev_err(&bcm4377->pdev->dev, "Creating rings failed with %d\n", ret); |
| return ret; |
| } |
| |
| static int bcm4377_hci_close(struct hci_dev *hdev) |
| { |
| struct bcm4377_data *bcm4377 = hci_get_drvdata(hdev); |
| |
| dev_dbg(&bcm4377->pdev->dev, "destroying rings in hci_close\n"); |
| |
| bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->acl_d2h_ring); |
| bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->acl_h2d_ring); |
| bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->sco_d2h_ring); |
| bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->sco_h2d_ring); |
| bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->hci_d2h_ring); |
| bcm4377_destroy_transfer_ring(bcm4377, &bcm4377->hci_h2d_ring); |
| |
| bcm4377_destroy_completion_ring(bcm4377, &bcm4377->sco_event_ring); |
| bcm4377_destroy_completion_ring(bcm4377, &bcm4377->sco_ack_ring); |
| bcm4377_destroy_completion_ring(bcm4377, &bcm4377->hci_acl_event_ring); |
| bcm4377_destroy_completion_ring(bcm4377, &bcm4377->hci_acl_ack_ring); |
| |
| return 0; |
| } |
| |
| static bool bcm4377_is_valid_bdaddr(struct bcm4377_data *bcm4377, |
| bdaddr_t *addr) |
| { |
| if (addr->b[0] != 0x93) |
| return true; |
| if (addr->b[1] != 0x76) |
| return true; |
| if (addr->b[2] != 0x00) |
| return true; |
| if (addr->b[4] != (bcm4377->hw->id & 0xff)) |
| return true; |
| if (addr->b[5] != (bcm4377->hw->id >> 8)) |
| return true; |
| return false; |
| } |
| |
| static int bcm4377_check_bdaddr(struct bcm4377_data *bcm4377) |
| { |
| struct hci_rp_read_bd_addr *bda; |
| struct sk_buff *skb; |
| |
| skb = __hci_cmd_sync(bcm4377->hdev, HCI_OP_READ_BD_ADDR, 0, NULL, |
| HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| int err = PTR_ERR(skb); |
| |
| dev_err(&bcm4377->pdev->dev, "HCI_OP_READ_BD_ADDR failed (%d)", |
| err); |
| return err; |
| } |
| |
| if (skb->len != sizeof(*bda)) { |
| dev_err(&bcm4377->pdev->dev, |
| "HCI_OP_READ_BD_ADDR reply length invalid"); |
| kfree_skb(skb); |
| return -EIO; |
| } |
| |
| bda = (struct hci_rp_read_bd_addr *)skb->data; |
| if (!bcm4377_is_valid_bdaddr(bcm4377, &bda->bdaddr)) |
| set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &bcm4377->hdev->quirks); |
| |
| kfree_skb(skb); |
| return 0; |
| } |
| |
| static int bcm4377_hci_setup(struct hci_dev *hdev) |
| { |
| struct bcm4377_data *bcm4377 = hci_get_drvdata(hdev); |
| const struct firmware *fw; |
| int ret; |
| |
| if (bcm4377->hw->send_calibration) { |
| ret = bcm4377->hw->send_calibration(bcm4377); |
| if (ret) |
| return ret; |
| } |
| |
| fw = bcm4377_request_blob(bcm4377, "ptb"); |
| if (!fw) { |
| dev_err(&bcm4377->pdev->dev, "failed to load PTB data"); |
| return -ENOENT; |
| } |
| |
| ret = bcm4377->hw->send_ptb(bcm4377, fw); |
| release_firmware(fw); |
| if (ret) |
| return ret; |
| |
| return bcm4377_check_bdaddr(bcm4377); |
| } |
| |
| static int bcm4377_hci_send_frame(struct hci_dev *hdev, struct sk_buff *skb) |
| { |
| struct bcm4377_data *bcm4377 = hci_get_drvdata(hdev); |
| struct bcm4377_transfer_ring *ring; |
| int ret; |
| |
| switch (hci_skb_pkt_type(skb)) { |
| case HCI_COMMAND_PKT: |
| hdev->stat.cmd_tx++; |
| ring = &bcm4377->hci_h2d_ring; |
| break; |
| |
| case HCI_ACLDATA_PKT: |
| hdev->stat.acl_tx++; |
| ring = &bcm4377->acl_h2d_ring; |
| break; |
| |
| case HCI_SCODATA_PKT: |
| hdev->stat.sco_tx++; |
| ring = &bcm4377->sco_h2d_ring; |
| break; |
| |
| default: |
| return -EILSEQ; |
| } |
| |
| ret = bcm4377_enqueue(bcm4377, ring, skb->data, skb->len, false); |
| if (ret < 0) { |
| hdev->stat.err_tx++; |
| return ret; |
| } |
| |
| hdev->stat.byte_tx += skb->len; |
| kfree_skb(skb); |
| return ret; |
| } |
| |
| static int bcm4377_hci_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr) |
| { |
| struct bcm4377_data *bcm4377 = hci_get_drvdata(hdev); |
| struct sk_buff *skb; |
| int err; |
| |
| skb = __hci_cmd_sync(hdev, 0xfc01, 6, bdaddr, HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) { |
| err = PTR_ERR(skb); |
| dev_err(&bcm4377->pdev->dev, |
| "Change address command failed (%d)", err); |
| return err; |
| } |
| kfree_skb(skb); |
| |
| return 0; |
| } |
| |
| static int bcm4377_alloc_transfer_ring(struct bcm4377_data *bcm4377, |
| struct bcm4377_transfer_ring *ring) |
| { |
| size_t entry_size; |
| |
| spin_lock_init(&ring->lock); |
| ring->payload_size = ALIGN(ring->payload_size, 4); |
| ring->mapped_payload_size = ALIGN(ring->mapped_payload_size, 4); |
| |
| if (ring->payload_size > BCM4377_XFER_RING_MAX_INPLACE_PAYLOAD_SIZE) |
| return -EINVAL; |
| if (ring->n_entries > BCM4377_MAX_RING_SIZE) |
| return -EINVAL; |
| if (ring->virtual && ring->allow_wait) |
| return -EINVAL; |
| |
| if (ring->d2h_buffers_only) { |
| if (ring->virtual) |
| return -EINVAL; |
| if (ring->payload_size) |
| return -EINVAL; |
| if (!ring->mapped_payload_size) |
| return -EINVAL; |
| } |
| if (ring->virtual) |
| return 0; |
| |
| entry_size = |
| ring->payload_size + sizeof(struct bcm4377_xfer_ring_entry); |
| ring->ring = dmam_alloc_coherent(&bcm4377->pdev->dev, |
| ring->n_entries * entry_size, |
| &ring->ring_dma, GFP_KERNEL); |
| if (!ring->ring) |
| return -ENOMEM; |
| |
| if (ring->allow_wait) { |
| ring->events = devm_kcalloc(&bcm4377->pdev->dev, |
| ring->n_entries, |
| sizeof(*ring->events), GFP_KERNEL); |
| if (!ring->events) |
| return -ENOMEM; |
| } |
| |
| if (ring->mapped_payload_size) { |
| ring->payloads = dmam_alloc_coherent( |
| &bcm4377->pdev->dev, |
| ring->n_entries * ring->mapped_payload_size, |
| &ring->payloads_dma, GFP_KERNEL); |
| if (!ring->payloads) |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| static int bcm4377_alloc_completion_ring(struct bcm4377_data *bcm4377, |
| struct bcm4377_completion_ring *ring) |
| { |
| size_t entry_size; |
| |
| ring->payload_size = ALIGN(ring->payload_size, 4); |
| if (ring->payload_size > BCM4377_XFER_RING_MAX_INPLACE_PAYLOAD_SIZE) |
| return -EINVAL; |
| if (ring->n_entries > BCM4377_MAX_RING_SIZE) |
| return -EINVAL; |
| |
| entry_size = ring->payload_size + |
| sizeof(struct bcm4377_completion_ring_entry); |
| |
| ring->ring = dmam_alloc_coherent(&bcm4377->pdev->dev, |
| ring->n_entries * entry_size, |
| &ring->ring_dma, GFP_KERNEL); |
| if (!ring->ring) |
| return -ENOMEM; |
| return 0; |
| } |
| |
| static int bcm4377_init_context(struct bcm4377_data *bcm4377) |
| { |
| struct device *dev = &bcm4377->pdev->dev; |
| dma_addr_t peripheral_info_dma; |
| |
| bcm4377->ctx = dmam_alloc_coherent(dev, sizeof(*bcm4377->ctx), |
| &bcm4377->ctx_dma, GFP_KERNEL); |
| if (!bcm4377->ctx) |
| return -ENOMEM; |
| memset(bcm4377->ctx, 0, sizeof(*bcm4377->ctx)); |
| |
| bcm4377->ring_state = |
| dmam_alloc_coherent(dev, sizeof(*bcm4377->ring_state), |
| &bcm4377->ring_state_dma, GFP_KERNEL); |
| if (!bcm4377->ring_state) |
| return -ENOMEM; |
| memset(bcm4377->ring_state, 0, sizeof(*bcm4377->ring_state)); |
| |
| bcm4377->ctx->version = cpu_to_le16(1); |
| bcm4377->ctx->size = cpu_to_le16(sizeof(*bcm4377->ctx)); |
| bcm4377->ctx->enabled_caps = cpu_to_le32(2); |
| |
| /* |
| * The BT device will write 0x20 bytes of data to this buffer but |
| * the exact contents are unknown. It only needs to exist for BT |
| * to work such that we can just allocate and then ignore it. |
| */ |
| if (!dmam_alloc_coherent(&bcm4377->pdev->dev, 0x20, |
| &peripheral_info_dma, GFP_KERNEL)) |
| return -ENOMEM; |
| bcm4377->ctx->peripheral_info_addr = cpu_to_le64(peripheral_info_dma); |
| |
| bcm4377->ctx->xfer_ring_heads_addr = cpu_to_le64( |
| bcm4377->ring_state_dma + |
| offsetof(struct bcm4377_ring_state, xfer_ring_head)); |
| bcm4377->ctx->xfer_ring_tails_addr = cpu_to_le64( |
| bcm4377->ring_state_dma + |
| offsetof(struct bcm4377_ring_state, xfer_ring_tail)); |
| bcm4377->ctx->completion_ring_heads_addr = cpu_to_le64( |
| bcm4377->ring_state_dma + |
| offsetof(struct bcm4377_ring_state, completion_ring_head)); |
| bcm4377->ctx->completion_ring_tails_addr = cpu_to_le64( |
| bcm4377->ring_state_dma + |
| offsetof(struct bcm4377_ring_state, completion_ring_tail)); |
| |
| bcm4377->ctx->n_completion_rings = |
| cpu_to_le16(BCM4377_N_COMPLETION_RINGS); |
| bcm4377->ctx->n_xfer_rings = cpu_to_le16(BCM4377_N_TRANSFER_RINGS); |
| |
| bcm4377->ctx->control_completion_ring_addr = |
| cpu_to_le64(bcm4377->control_ack_ring.ring_dma); |
| bcm4377->ctx->control_completion_ring_n_entries = |
| cpu_to_le16(bcm4377->control_ack_ring.n_entries); |
| bcm4377->ctx->control_completion_ring_doorbell = cpu_to_le16(0xffff); |
| bcm4377->ctx->control_completion_ring_msi = 0; |
| bcm4377->ctx->control_completion_ring_header_size = 0; |
| bcm4377->ctx->control_completion_ring_footer_size = 0; |
| |
| bcm4377->ctx->control_xfer_ring_addr = |
| cpu_to_le64(bcm4377->control_h2d_ring.ring_dma); |
| bcm4377->ctx->control_xfer_ring_n_entries = |
| cpu_to_le16(bcm4377->control_h2d_ring.n_entries); |
| bcm4377->ctx->control_xfer_ring_doorbell = |
| cpu_to_le16(bcm4377->control_h2d_ring.doorbell); |
| bcm4377->ctx->control_xfer_ring_msi = 0; |
| bcm4377->ctx->control_xfer_ring_header_size = 0; |
| bcm4377->ctx->control_xfer_ring_footer_size = |
| bcm4377->control_h2d_ring.payload_size / 4; |
| |
| dev_dbg(&bcm4377->pdev->dev, "context initialized at IOVA %pad", |
| &bcm4377->ctx_dma); |
| |
| return 0; |
| } |
| |
| static int bcm4377_prepare_rings(struct bcm4377_data *bcm4377) |
| { |
| int ret; |
| |
| /* |
| * Even though many of these settings appear to be configurable |
| * when sending the "create ring" messages most of these are |
| * actually hardcoded in some (and quite possibly all) firmware versions |
| * and changing them on the host has no effect. |
| * Specifically, this applies to at least the doorbells, the transfer |
| * and completion ring ids and their mapping (e.g. both HCI and ACL |
| * entries will always be queued in completion rings 1 and 2 no matter |
| * what we configure here). |
| */ |
| bcm4377->control_ack_ring.ring_id = BCM4377_ACK_RING_CONTROL; |
| bcm4377->control_ack_ring.n_entries = 32; |
| bcm4377->control_ack_ring.transfer_rings = |
| BIT(BCM4377_XFER_RING_CONTROL); |
| |
| bcm4377->hci_acl_ack_ring.ring_id = BCM4377_ACK_RING_HCI_ACL; |
| bcm4377->hci_acl_ack_ring.n_entries = 2 * BCM4377_RING_N_ENTRIES; |
| bcm4377->hci_acl_ack_ring.transfer_rings = |
| BIT(BCM4377_XFER_RING_HCI_H2D) | BIT(BCM4377_XFER_RING_ACL_H2D); |
| bcm4377->hci_acl_ack_ring.delay = 1000; |
| |
| /* |
| * A payload size of MAX_EVENT_PAYLOAD_SIZE is enough here since large |
| * ACL packets will be transmitted inside buffers mapped via |
| * acl_d2h_ring anyway. |
| */ |
| bcm4377->hci_acl_event_ring.ring_id = BCM4377_EVENT_RING_HCI_ACL; |
| bcm4377->hci_acl_event_ring.payload_size = MAX_EVENT_PAYLOAD_SIZE; |
| bcm4377->hci_acl_event_ring.n_entries = 2 * BCM4377_RING_N_ENTRIES; |
| bcm4377->hci_acl_event_ring.transfer_rings = |
| BIT(BCM4377_XFER_RING_HCI_D2H) | BIT(BCM4377_XFER_RING_ACL_D2H); |
| bcm4377->hci_acl_event_ring.delay = 1000; |
| |
| bcm4377->sco_ack_ring.ring_id = BCM4377_ACK_RING_SCO; |
| bcm4377->sco_ack_ring.n_entries = BCM4377_RING_N_ENTRIES; |
| bcm4377->sco_ack_ring.transfer_rings = BIT(BCM4377_XFER_RING_SCO_H2D); |
| |
| bcm4377->sco_event_ring.ring_id = BCM4377_EVENT_RING_SCO; |
| bcm4377->sco_event_ring.payload_size = MAX_SCO_PAYLOAD_SIZE; |
| bcm4377->sco_event_ring.n_entries = BCM4377_RING_N_ENTRIES; |
| bcm4377->sco_event_ring.transfer_rings = BIT(BCM4377_XFER_RING_SCO_D2H); |
| |
| bcm4377->control_h2d_ring.ring_id = BCM4377_XFER_RING_CONTROL; |
| bcm4377->control_h2d_ring.doorbell = BCM4377_DOORBELL_CONTROL; |
| bcm4377->control_h2d_ring.payload_size = BCM4377_CONTROL_MSG_SIZE; |
| bcm4377->control_h2d_ring.completion_ring = BCM4377_ACK_RING_CONTROL; |
| bcm4377->control_h2d_ring.allow_wait = true; |
| bcm4377->control_h2d_ring.n_entries = BCM4377_RING_N_ENTRIES; |
| |
| bcm4377->hci_h2d_ring.ring_id = BCM4377_XFER_RING_HCI_H2D; |
| bcm4377->hci_h2d_ring.doorbell = BCM4377_DOORBELL_HCI_H2D; |
| bcm4377->hci_h2d_ring.payload_size = MAX_EVENT_PAYLOAD_SIZE; |
| bcm4377->hci_h2d_ring.completion_ring = BCM4377_ACK_RING_HCI_ACL; |
| bcm4377->hci_h2d_ring.n_entries = BCM4377_RING_N_ENTRIES; |
| |
| bcm4377->hci_d2h_ring.ring_id = BCM4377_XFER_RING_HCI_D2H; |
| bcm4377->hci_d2h_ring.doorbell = BCM4377_DOORBELL_HCI_D2H; |
| bcm4377->hci_d2h_ring.completion_ring = BCM4377_EVENT_RING_HCI_ACL; |
| bcm4377->hci_d2h_ring.virtual = true; |
| bcm4377->hci_d2h_ring.n_entries = BCM4377_RING_N_ENTRIES; |
| |
| bcm4377->sco_h2d_ring.ring_id = BCM4377_XFER_RING_SCO_H2D; |
| bcm4377->sco_h2d_ring.doorbell = BCM4377_DOORBELL_SCO; |
| bcm4377->sco_h2d_ring.payload_size = MAX_SCO_PAYLOAD_SIZE; |
| bcm4377->sco_h2d_ring.completion_ring = BCM4377_ACK_RING_SCO; |
| bcm4377->sco_h2d_ring.sync = true; |
| bcm4377->sco_h2d_ring.n_entries = BCM4377_RING_N_ENTRIES; |
| |
| bcm4377->sco_d2h_ring.ring_id = BCM4377_XFER_RING_SCO_D2H; |
| bcm4377->sco_d2h_ring.doorbell = BCM4377_DOORBELL_SCO; |
| bcm4377->sco_d2h_ring.completion_ring = BCM4377_EVENT_RING_SCO; |
| bcm4377->sco_d2h_ring.virtual = true; |
| bcm4377->sco_d2h_ring.sync = true; |
| bcm4377->sco_d2h_ring.n_entries = BCM4377_RING_N_ENTRIES; |
| |
| /* |
| * This ring has to use mapped_payload_size because the largest ACL |
| * packet doesn't fit inside the largest possible footer |
| */ |
| bcm4377->acl_h2d_ring.ring_id = BCM4377_XFER_RING_ACL_H2D; |
| bcm4377->acl_h2d_ring.doorbell = BCM4377_DOORBELL_ACL_H2D; |
| bcm4377->acl_h2d_ring.mapped_payload_size = MAX_ACL_PAYLOAD_SIZE; |
| bcm4377->acl_h2d_ring.completion_ring = BCM4377_ACK_RING_HCI_ACL; |
| bcm4377->acl_h2d_ring.n_entries = BCM4377_RING_N_ENTRIES; |
| |
| /* |
| * This ring only contains empty buffers to be used by incoming |
| * ACL packets that do not fit inside the footer of hci_acl_event_ring |
| */ |
| bcm4377->acl_d2h_ring.ring_id = BCM4377_XFER_RING_ACL_D2H; |
| bcm4377->acl_d2h_ring.doorbell = BCM4377_DOORBELL_ACL_D2H; |
| bcm4377->acl_d2h_ring.completion_ring = BCM4377_EVENT_RING_HCI_ACL; |
| bcm4377->acl_d2h_ring.d2h_buffers_only = true; |
| bcm4377->acl_d2h_ring.mapped_payload_size = MAX_ACL_PAYLOAD_SIZE; |
| bcm4377->acl_d2h_ring.n_entries = BCM4377_RING_N_ENTRIES; |
| |
| /* |
| * no need for any cleanup since this is only called from _probe |
| * and only devres-managed allocations are used |
| */ |
| ret = bcm4377_alloc_transfer_ring(bcm4377, &bcm4377->control_h2d_ring); |
| if (ret) |
| return ret; |
| ret = bcm4377_alloc_transfer_ring(bcm4377, &bcm4377->hci_h2d_ring); |
| if (ret) |
| return ret; |
| ret = bcm4377_alloc_transfer_ring(bcm4377, &bcm4377->hci_d2h_ring); |
| if (ret) |
| return ret; |
| ret = bcm4377_alloc_transfer_ring(bcm4377, &bcm4377->sco_h2d_ring); |
| if (ret) |
| return ret; |
| ret = bcm4377_alloc_transfer_ring(bcm4377, &bcm4377->sco_d2h_ring); |
| if (ret) |
| return ret; |
| ret = bcm4377_alloc_transfer_ring(bcm4377, &bcm4377->acl_h2d_ring); |
| if (ret) |
| return ret; |
| ret = bcm4377_alloc_transfer_ring(bcm4377, &bcm4377->acl_d2h_ring); |
| if (ret) |
| return ret; |
| |
| ret = bcm4377_alloc_completion_ring(bcm4377, |
| &bcm4377->control_ack_ring); |
| if (ret) |
| return ret; |
| ret = bcm4377_alloc_completion_ring(bcm4377, |
| &bcm4377->hci_acl_ack_ring); |
| if (ret) |
| return ret; |
| ret = bcm4377_alloc_completion_ring(bcm4377, |
| &bcm4377->hci_acl_event_ring); |
| if (ret) |
| return ret; |
| ret = bcm4377_alloc_completion_ring(bcm4377, &bcm4377->sco_ack_ring); |
| if (ret) |
| return ret; |
| ret = bcm4377_alloc_completion_ring(bcm4377, &bcm4377->sco_event_ring); |
| if (ret) |
| return ret; |
| |
| dev_dbg(&bcm4377->pdev->dev, "all rings allocated and prepared\n"); |
| |
| return 0; |
| } |
| |
| static int bcm4377_boot(struct bcm4377_data *bcm4377) |
| { |
| const struct firmware *fw; |
| void *bfr; |
| dma_addr_t fw_dma; |
| int ret = 0; |
| u32 bootstage, rti_status; |
| |
| bootstage = ioread32(bcm4377->bar2 + BCM4377_BAR2_BOOTSTAGE); |
| rti_status = ioread32(bcm4377->bar2 + BCM4377_BAR2_RTI_STATUS); |
| |
| if (bootstage != 0) { |
| dev_err(&bcm4377->pdev->dev, "bootstage is %d and not 0\n", |
| bootstage); |
| return -EINVAL; |
| } |
| |
| if (rti_status != 0) { |
| dev_err(&bcm4377->pdev->dev, "RTI status is %d and not 0\n", |
| rti_status); |
| return -EINVAL; |
| } |
| |
| fw = bcm4377_request_blob(bcm4377, "bin"); |
| if (!fw) { |
| dev_err(&bcm4377->pdev->dev, "Failed to load firmware\n"); |
| return -ENOENT; |
| } |
| |
| bfr = dma_alloc_coherent(&bcm4377->pdev->dev, fw->size, &fw_dma, |
| GFP_KERNEL); |
| if (!bfr) { |
| ret = -ENOMEM; |
| goto out_release_fw; |
| } |
| |
| memcpy(bfr, fw->data, fw->size); |
| |
| iowrite32(0, bcm4377->bar0 + BCM4377_BAR0_HOST_WINDOW_LO); |
| iowrite32(0, bcm4377->bar0 + BCM4377_BAR0_HOST_WINDOW_HI); |
| iowrite32(BCM4377_DMA_MASK, |
| bcm4377->bar0 + BCM4377_BAR0_HOST_WINDOW_SIZE); |
| |
| iowrite32(lower_32_bits(fw_dma), bcm4377->bar2 + BCM4377_BAR2_FW_LO); |
| iowrite32(upper_32_bits(fw_dma), bcm4377->bar2 + BCM4377_BAR2_FW_HI); |
| iowrite32(fw->size, bcm4377->bar2 + BCM4377_BAR2_FW_SIZE); |
| iowrite32(0, bcm4377->bar0 + BCM4377_BAR0_FW_DOORBELL); |
| |
| dev_dbg(&bcm4377->pdev->dev, "waiting for firmware to boot\n"); |
| |
| ret = wait_for_completion_interruptible_timeout(&bcm4377->event, |
| BCM4377_TIMEOUT); |
| if (ret == 0) { |
| ret = -ETIMEDOUT; |
| goto out_dma_free; |
| } else if (ret < 0) { |
| goto out_dma_free; |
| } |
| |
| if (bcm4377->bootstage != 2) { |
| dev_err(&bcm4377->pdev->dev, "boostage %d != 2\n", |
| bcm4377->bootstage); |
| ret = -ENXIO; |
| goto out_dma_free; |
| } |
| |
| dev_dbg(&bcm4377->pdev->dev, "firmware has booted (stage = %x)\n", |
| bcm4377->bootstage); |
| ret = 0; |
| |
| out_dma_free: |
| dma_free_coherent(&bcm4377->pdev->dev, fw->size, bfr, fw_dma); |
| out_release_fw: |
| release_firmware(fw); |
| return ret; |
| } |
| |
| static int bcm4377_setup_rti(struct bcm4377_data *bcm4377) |
| { |
| int ret; |
| |
| dev_dbg(&bcm4377->pdev->dev, "starting RTI\n"); |
| iowrite32(1, bcm4377->bar0 + BCM4377_BAR0_RTI_CONTROL); |
| |
| ret = wait_for_completion_interruptible_timeout(&bcm4377->event, |
| BCM4377_TIMEOUT); |
| if (ret == 0) { |
| dev_err(&bcm4377->pdev->dev, |
| "timed out while waiting for RTI to transition to state 1"); |
| return -ETIMEDOUT; |
| } else if (ret < 0) { |
| return ret; |
| } |
| |
| if (bcm4377->rti_status != 1) { |
| dev_err(&bcm4377->pdev->dev, "RTI did not ack state 1 (%d)\n", |
| bcm4377->rti_status); |
| return -ENODEV; |
| } |
| dev_dbg(&bcm4377->pdev->dev, "RTI is in state 1\n"); |
| |
| /* allow access to the entire IOVA space again */ |
| iowrite32(0, bcm4377->bar2 + BCM4377_BAR2_RTI_WINDOW_LO); |
| iowrite32(0, bcm4377->bar2 + BCM4377_BAR2_RTI_WINDOW_HI); |
| iowrite32(BCM4377_DMA_MASK, |
| bcm4377->bar2 + BCM4377_BAR2_RTI_WINDOW_SIZE); |
| |
| /* setup "Converged IPC" context */ |
| iowrite32(lower_32_bits(bcm4377->ctx_dma), |
| bcm4377->bar2 + BCM4377_BAR2_CONTEXT_ADDR_LO); |
| iowrite32(upper_32_bits(bcm4377->ctx_dma), |
| bcm4377->bar2 + BCM4377_BAR2_CONTEXT_ADDR_HI); |
| iowrite32(2, bcm4377->bar0 + BCM4377_BAR0_RTI_CONTROL); |
| |
| ret = wait_for_completion_interruptible_timeout(&bcm4377->event, |
| BCM4377_TIMEOUT); |
| if (ret == 0) { |
| dev_err(&bcm4377->pdev->dev, |
| "timed out while waiting for RTI to transition to state 2"); |
| return -ETIMEDOUT; |
| } else if (ret < 0) { |
| return ret; |
| } |
| |
| if (bcm4377->rti_status != 2) { |
| dev_err(&bcm4377->pdev->dev, "RTI did not ack state 2 (%d)\n", |
| bcm4377->rti_status); |
| return -ENODEV; |
| } |
| |
| dev_dbg(&bcm4377->pdev->dev, |
| "RTI is in state 2; control ring is ready\n"); |
| bcm4377->control_ack_ring.enabled = true; |
| |
| return 0; |
| } |
| |
| static int bcm4377_parse_otp_board_params(struct bcm4377_data *bcm4377, |
| char tag, const char *val, size_t len) |
| { |
| if (tag != 'V') |
| return 0; |
| if (len >= sizeof(bcm4377->vendor)) |
| return -EINVAL; |
| |
| strscpy(bcm4377->vendor, val, len + 1); |
| return 0; |
| } |
| |
| static int bcm4377_parse_otp_chip_params(struct bcm4377_data *bcm4377, char tag, |
| const char *val, size_t len) |
| { |
| size_t idx = 0; |
| |
| if (tag != 's') |
| return 0; |
| if (len >= sizeof(bcm4377->stepping)) |
| return -EINVAL; |
| |
| while (len != 0) { |
| bcm4377->stepping[idx] = tolower(val[idx]); |
| if (val[idx] == '\0') |
| return 0; |
| |
| idx++; |
| len--; |
| } |
| |
| bcm4377->stepping[idx] = '\0'; |
| return 0; |
| } |
| |
| static int bcm4377_parse_otp_str(struct bcm4377_data *bcm4377, const u8 *str, |
| enum bcm4377_otp_params_type type) |
| { |
| const char *p; |
| int ret; |
| |
| p = skip_spaces(str); |
| while (*p) { |
| char tag = *p++; |
| const char *end; |
| size_t len; |
| |
| if (*p++ != '=') /* implicit NUL check */ |
| return -EINVAL; |
| |
| /* *p might be NUL here, if so end == p and len == 0 */ |
| end = strchrnul(p, ' '); |
| len = end - p; |
| |
| /* leave 1 byte for NUL in destination string */ |
| if (len > (BCM4377_OTP_MAX_PARAM_LEN - 1)) |
| return -EINVAL; |
| |
| switch (type) { |
| case BCM4377_OTP_BOARD_PARAMS: |
| ret = bcm4377_parse_otp_board_params(bcm4377, tag, p, |
| len); |
| break; |
| case BCM4377_OTP_CHIP_PARAMS: |
| ret = bcm4377_parse_otp_chip_params(bcm4377, tag, p, |
| len); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| if (ret) |
| return ret; |
| |
| /* Skip to next arg, if any */ |
| p = skip_spaces(end); |
| } |
| |
| return 0; |
| } |
| |
| static int bcm4377_parse_otp_sys_vendor(struct bcm4377_data *bcm4377, u8 *otp, |
| size_t size) |
| { |
| int idx = 4; |
| const char *chip_params; |
| const char *board_params; |
| int ret; |
| |
| /* 4-byte header and two empty strings */ |
| if (size < 6) |
| return -EINVAL; |
| |
| if (get_unaligned_le32(otp) != BCM4377_OTP_VENDOR_HDR) |
| return -EINVAL; |
| |
| chip_params = &otp[idx]; |
| |
| /* Skip first string, including terminator */ |
| idx += strnlen(chip_params, size - idx) + 1; |
| if (idx >= size) |
| return -EINVAL; |
| |
| board_params = &otp[idx]; |
| |
| /* Skip to terminator of second string */ |
| idx += strnlen(board_params, size - idx); |
| if (idx >= size) |
| return -EINVAL; |
| |
| /* At this point both strings are guaranteed NUL-terminated */ |
| dev_dbg(&bcm4377->pdev->dev, |
| "OTP: chip_params='%s' board_params='%s'\n", chip_params, |
| board_params); |
| |
| ret = bcm4377_parse_otp_str(bcm4377, chip_params, |
| BCM4377_OTP_CHIP_PARAMS); |
| if (ret) |
| return ret; |
| |
| ret = bcm4377_parse_otp_str(bcm4377, board_params, |
| BCM4377_OTP_BOARD_PARAMS); |
| if (ret) |
| return ret; |
| |
| if (!bcm4377->stepping[0] || !bcm4377->vendor[0]) |
| return -EINVAL; |
| |
| dev_dbg(&bcm4377->pdev->dev, "OTP: stepping=%s, vendor=%s\n", |
| bcm4377->stepping, bcm4377->vendor); |
| return 0; |
| } |
| |
| static int bcm4377_parse_otp(struct bcm4377_data *bcm4377) |
| { |
| u8 *otp; |
| int i; |
| int ret = -ENOENT; |
| |
| otp = kzalloc(BCM4377_OTP_SIZE, GFP_KERNEL); |
| if (!otp) |
| return -ENOMEM; |
| |
| for (i = 0; i < BCM4377_OTP_SIZE; ++i) |
| otp[i] = ioread8(bcm4377->bar0 + bcm4377->hw->otp_offset + i); |
| |
| i = 0; |
| while (i < (BCM4377_OTP_SIZE - 1)) { |
| u8 type = otp[i]; |
| u8 length = otp[i + 1]; |
| |
| if (type == 0) |
| break; |
| |
| if ((i + 2 + length) > BCM4377_OTP_SIZE) |
| break; |
| |
| switch (type) { |
| case BCM4377_OTP_SYS_VENDOR: |
| dev_dbg(&bcm4377->pdev->dev, |
| "OTP @ 0x%x (%d): SYS_VENDOR", i, length); |
| ret = bcm4377_parse_otp_sys_vendor(bcm4377, &otp[i + 2], |
| length); |
| break; |
| case BCM4377_OTP_CIS: |
| dev_dbg(&bcm4377->pdev->dev, "OTP @ 0x%x (%d): CIS", i, |
| length); |
| break; |
| default: |
| dev_dbg(&bcm4377->pdev->dev, "OTP @ 0x%x (%d): unknown", |
| i, length); |
| break; |
| } |
| |
| i += 2 + length; |
| } |
| |
| kfree(otp); |
| return ret; |
| } |
| |
| static int bcm4377_init_cfg(struct bcm4377_data *bcm4377) |
| { |
| int ret; |
| u32 ctrl; |
| |
| ret = pci_write_config_dword(bcm4377->pdev, |
| BCM4377_PCIECFG_BAR0_WINDOW1, |
| bcm4377->hw->bar0_window1); |
| if (ret) |
| return ret; |
| |
| ret = pci_write_config_dword(bcm4377->pdev, |
| BCM4377_PCIECFG_BAR0_WINDOW2, |
| bcm4377->hw->bar0_window2); |
| if (ret) |
| return ret; |
| |
| ret = pci_write_config_dword( |
| bcm4377->pdev, BCM4377_PCIECFG_BAR0_CORE2_WINDOW1, |
| BCM4377_PCIECFG_BAR0_CORE2_WINDOW1_DEFAULT); |
| if (ret) |
| return ret; |
| |
| if (bcm4377->hw->has_bar0_core2_window2) { |
| ret = pci_write_config_dword(bcm4377->pdev, |
| BCM4377_PCIECFG_BAR0_CORE2_WINDOW2, |
| bcm4377->hw->bar0_core2_window2); |
| if (ret) |
| return ret; |
| } |
| |
| ret = pci_write_config_dword(bcm4377->pdev, BCM4377_PCIECFG_BAR2_WINDOW, |
| BCM4377_PCIECFG_BAR2_WINDOW_DEFAULT); |
| if (ret) |
| return ret; |
| |
| ret = pci_read_config_dword(bcm4377->pdev, |
| BCM4377_PCIECFG_SUBSYSTEM_CTRL, &ctrl); |
| if (ret) |
| return ret; |
| |
| if (bcm4377->hw->clear_pciecfg_subsystem_ctrl_bit19) |
| ctrl &= ~BIT(19); |
| ctrl |= BIT(16); |
| |
| return pci_write_config_dword(bcm4377->pdev, |
| BCM4377_PCIECFG_SUBSYSTEM_CTRL, ctrl); |
| } |
| |
| static int bcm4377_probe_dmi(struct bcm4377_data *bcm4377) |
| { |
| const struct dmi_system_id *board_type_dmi_id; |
| |
| board_type_dmi_id = dmi_first_match(bcm4377_dmi_board_table); |
| if (board_type_dmi_id && board_type_dmi_id->driver_data) { |
| bcm4377->board_type = board_type_dmi_id->driver_data; |
| dev_dbg(&bcm4377->pdev->dev, |
| "found board type via DMI match: %s\n", |
| bcm4377->board_type); |
| } |
| |
| return 0; |
| } |
| |
| static int bcm4377_probe_of(struct bcm4377_data *bcm4377) |
| { |
| struct device_node *np = bcm4377->pdev->dev.of_node; |
| int ret; |
| |
| if (!np) |
| return 0; |
| |
| ret = of_property_read_string(np, "brcm,board-type", |
| &bcm4377->board_type); |
| if (ret) { |
| dev_err(&bcm4377->pdev->dev, "no brcm,board-type property\n"); |
| return ret; |
| } |
| |
| bcm4377->taurus_beamforming_cal_blob = |
| of_get_property(np, "brcm,taurus-bf-cal-blob", |
| &bcm4377->taurus_beamforming_cal_size); |
| if (!bcm4377->taurus_beamforming_cal_blob) { |
| dev_err(&bcm4377->pdev->dev, |
| "no brcm,taurus-bf-cal-blob property\n"); |
| return -ENOENT; |
| } |
| bcm4377->taurus_cal_blob = of_get_property(np, "brcm,taurus-cal-blob", |
| &bcm4377->taurus_cal_size); |
| if (!bcm4377->taurus_cal_blob) { |
| dev_err(&bcm4377->pdev->dev, |
| "no brcm,taurus-cal-blob property\n"); |
| return -ENOENT; |
| } |
| |
| return 0; |
| } |
| |
| static void bcm4377_disable_aspm(struct bcm4377_data *bcm4377) |
| { |
| pci_disable_link_state(bcm4377->pdev, |
| PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1); |
| |
| /* |
| * pci_disable_link_state can fail if either CONFIG_PCIEASPM is disabled |
| * or if the BIOS hasn't handed over control to us. We must *always* |
| * disable ASPM for this device due to hardware errata though. |
| */ |
| pcie_capability_clear_word(bcm4377->pdev, PCI_EXP_LNKCTL, |
| PCI_EXP_LNKCTL_ASPMC); |
| } |
| |
| static void bcm4377_pci_free_irq_vectors(void *data) |
| { |
| pci_free_irq_vectors(data); |
| } |
| |
| static void bcm4377_hci_free_dev(void *data) |
| { |
| hci_free_dev(data); |
| } |
| |
| static void bcm4377_hci_unregister_dev(void *data) |
| { |
| hci_unregister_dev(data); |
| } |
| |
| static int bcm4377_probe(struct pci_dev *pdev, const struct pci_device_id *id) |
| { |
| struct bcm4377_data *bcm4377; |
| struct hci_dev *hdev; |
| int ret, irq; |
| |
| ret = dma_set_mask_and_coherent(&pdev->dev, BCM4377_DMA_MASK); |
| if (ret) |
| return ret; |
| |
| bcm4377 = devm_kzalloc(&pdev->dev, sizeof(*bcm4377), GFP_KERNEL); |
| if (!bcm4377) |
| return -ENOMEM; |
| |
| bcm4377->pdev = pdev; |
| bcm4377->hw = &bcm4377_hw_variants[id->driver_data]; |
| init_completion(&bcm4377->event); |
| |
| ret = bcm4377_prepare_rings(bcm4377); |
| if (ret) |
| return ret; |
| |
| ret = bcm4377_init_context(bcm4377); |
| if (ret) |
| return ret; |
| |
| ret = bcm4377_probe_dmi(bcm4377); |
| if (ret) |
| return ret; |
| ret = bcm4377_probe_of(bcm4377); |
| if (ret) |
| return ret; |
| if (!bcm4377->board_type) { |
| dev_err(&pdev->dev, "unable to determine board type\n"); |
| return -ENODEV; |
| } |
| |
| if (bcm4377->hw->disable_aspm) |
| bcm4377_disable_aspm(bcm4377); |
| |
| ret = pci_reset_function_locked(pdev); |
| if (ret) |
| dev_warn( |
| &pdev->dev, |
| "function level reset failed with %d; trying to continue anyway\n", |
| ret); |
| |
| /* |
| * If this number is too low and we try to access any BAR too |
| * early the device will crash. Experiments have shown that |
| * approximately 50 msec is the minimum amount we have to wait. |
| * Let's double that to be safe. |
| */ |
| msleep(100); |
| |
| ret = pcim_enable_device(pdev); |
| if (ret) |
| return ret; |
| pci_set_master(pdev); |
| |
| ret = bcm4377_init_cfg(bcm4377); |
| if (ret) |
| return ret; |
| |
| bcm4377->bar0 = pcim_iomap(pdev, 0, 0); |
| if (!bcm4377->bar0) |
| return -EBUSY; |
| bcm4377->bar2 = pcim_iomap(pdev, 2, 0); |
| if (!bcm4377->bar2) |
| return -EBUSY; |
| |
| ret = bcm4377_parse_otp(bcm4377); |
| if (ret) { |
| dev_err(&pdev->dev, "Reading OTP failed with %d\n", ret); |
| return ret; |
| } |
| |
| /* |
| * Legacy interrupts result in an IRQ storm because we don't know where |
| * the interrupt mask and status registers for these chips are. |
| * MSIs are acked automatically instead. |
| */ |
| ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI); |
| if (ret < 0) |
| return -ENODEV; |
| ret = devm_add_action_or_reset(&pdev->dev, bcm4377_pci_free_irq_vectors, |
| pdev); |
| if (ret) |
| return ret; |
| |
| irq = pci_irq_vector(pdev, 0); |
| if (irq <= 0) |
| return -ENODEV; |
| |
| ret = devm_request_irq(&pdev->dev, irq, bcm4377_irq, 0, "bcm4377", |
| bcm4377); |
| if (ret) |
| return ret; |
| |
| hdev = hci_alloc_dev(); |
| if (!hdev) |
| return -ENOMEM; |
| ret = devm_add_action_or_reset(&pdev->dev, bcm4377_hci_free_dev, hdev); |
| if (ret) |
| return ret; |
| |
| bcm4377->hdev = hdev; |
| |
| hdev->bus = HCI_PCI; |
| hdev->dev_type = HCI_PRIMARY; |
| hdev->open = bcm4377_hci_open; |
| hdev->close = bcm4377_hci_close; |
| hdev->send = bcm4377_hci_send_frame; |
| hdev->set_bdaddr = bcm4377_hci_set_bdaddr; |
| hdev->setup = bcm4377_hci_setup; |
| |
| if (bcm4377->hw->broken_mws_transport_config) |
| set_bit(HCI_QUIRK_BROKEN_MWS_TRANSPORT_CONFIG, &hdev->quirks); |
| if (bcm4377->hw->broken_ext_scan) |
| set_bit(HCI_QUIRK_BROKEN_EXT_SCAN, &hdev->quirks); |
| if (bcm4377->hw->broken_le_coded) |
| set_bit(HCI_QUIRK_BROKEN_LE_CODED, &hdev->quirks); |
| |
| pci_set_drvdata(pdev, bcm4377); |
| hci_set_drvdata(hdev, bcm4377); |
| SET_HCIDEV_DEV(hdev, &pdev->dev); |
| |
| ret = bcm4377_boot(bcm4377); |
| if (ret) |
| return ret; |
| |
| ret = bcm4377_setup_rti(bcm4377); |
| if (ret) |
| return ret; |
| |
| ret = hci_register_dev(hdev); |
| if (ret) |
| return ret; |
| return devm_add_action_or_reset(&pdev->dev, bcm4377_hci_unregister_dev, |
| hdev); |
| } |
| |
| static int bcm4377_suspend(struct pci_dev *pdev, pm_message_t state) |
| { |
| struct bcm4377_data *bcm4377 = pci_get_drvdata(pdev); |
| int ret; |
| |
| ret = hci_suspend_dev(bcm4377->hdev); |
| if (ret) |
| return ret; |
| |
| iowrite32(BCM4377_BAR0_SLEEP_CONTROL_QUIESCE, |
| bcm4377->bar0 + BCM4377_BAR0_SLEEP_CONTROL); |
| |
| return 0; |
| } |
| |
| static int bcm4377_resume(struct pci_dev *pdev) |
| { |
| struct bcm4377_data *bcm4377 = pci_get_drvdata(pdev); |
| |
| iowrite32(BCM4377_BAR0_SLEEP_CONTROL_UNQUIESCE, |
| bcm4377->bar0 + BCM4377_BAR0_SLEEP_CONTROL); |
| |
| return hci_resume_dev(bcm4377->hdev); |
| } |
| |
| static const struct dmi_system_id bcm4377_dmi_board_table[] = { |
| { |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir9,1"), |
| }, |
| .driver_data = "apple,formosa", |
| }, |
| { |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro15,4"), |
| }, |
| .driver_data = "apple,formosa", |
| }, |
| { |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro16,3"), |
| }, |
| .driver_data = "apple,formosa", |
| }, |
| {} |
| }; |
| |
| static const struct bcm4377_hw bcm4377_hw_variants[] = { |
| [BCM4377] = { |
| .id = 0x4377, |
| .otp_offset = 0x4120, |
| .bar0_window1 = 0x1800b000, |
| .bar0_window2 = 0x1810c000, |
| .disable_aspm = true, |
| .broken_ext_scan = true, |
| .send_ptb = bcm4377_send_ptb, |
| }, |
| |
| [BCM4378] = { |
| .id = 0x4378, |
| .otp_offset = 0x4120, |
| .bar0_window1 = 0x18002000, |
| .bar0_window2 = 0x1810a000, |
| .bar0_core2_window2 = 0x18107000, |
| .has_bar0_core2_window2 = true, |
| .broken_mws_transport_config = true, |
| .broken_le_coded = true, |
| .send_calibration = bcm4378_send_calibration, |
| .send_ptb = bcm4378_send_ptb, |
| }, |
| |
| [BCM4387] = { |
| .id = 0x4387, |
| .otp_offset = 0x413c, |
| .bar0_window1 = 0x18002000, |
| .bar0_window2 = 0x18109000, |
| .bar0_core2_window2 = 0x18106000, |
| .has_bar0_core2_window2 = true, |
| .clear_pciecfg_subsystem_ctrl_bit19 = true, |
| .broken_mws_transport_config = true, |
| .broken_le_coded = true, |
| .send_calibration = bcm4387_send_calibration, |
| .send_ptb = bcm4378_send_ptb, |
| }, |
| }; |
| |
| #define BCM4377_DEVID_ENTRY(id) \ |
| { \ |
| PCI_VENDOR_ID_BROADCOM, BCM##id##_DEVICE_ID, PCI_ANY_ID, \ |
| PCI_ANY_ID, PCI_CLASS_NETWORK_OTHER << 8, 0xffff00, \ |
| BCM##id \ |
| } |
| |
| static const struct pci_device_id bcm4377_devid_table[] = { |
| BCM4377_DEVID_ENTRY(4377), |
| BCM4377_DEVID_ENTRY(4378), |
| BCM4377_DEVID_ENTRY(4387), |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(pci, bcm4377_devid_table); |
| |
| static struct pci_driver bcm4377_pci_driver = { |
| .name = "hci_bcm4377", |
| .id_table = bcm4377_devid_table, |
| .probe = bcm4377_probe, |
| .suspend = bcm4377_suspend, |
| .resume = bcm4377_resume, |
| }; |
| module_pci_driver(bcm4377_pci_driver); |
| |
| MODULE_AUTHOR("Sven Peter <sven@svenpeter.dev>"); |
| MODULE_DESCRIPTION("Bluetooth support for Broadcom 4377/4378/4387 devices"); |
| MODULE_LICENSE("Dual MIT/GPL"); |
| MODULE_FIRMWARE("brcm/brcmbt4377*.bin"); |
| MODULE_FIRMWARE("brcm/brcmbt4377*.ptb"); |
| MODULE_FIRMWARE("brcm/brcmbt4378*.bin"); |
| MODULE_FIRMWARE("brcm/brcmbt4378*.ptb"); |
| MODULE_FIRMWARE("brcm/brcmbt4387*.bin"); |
| MODULE_FIRMWARE("brcm/brcmbt4387*.ptb"); |