| // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause |
| /* |
| * Copyright (c) 2015-2018 Oracle. All rights reserved. |
| * Copyright (c) 2014 Open Grid Computing, Inc. All rights reserved. |
| * Copyright (c) 2005-2007 Network Appliance, Inc. All rights reserved. |
| * |
| * This software is available to you under a choice of one of two |
| * licenses. You may choose to be licensed under the terms of the GNU |
| * General Public License (GPL) Version 2, available from the file |
| * COPYING in the main directory of this source tree, or the BSD-type |
| * license below: |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * |
| * Neither the name of the Network Appliance, Inc. nor the names of |
| * its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written |
| * permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * Author: Tom Tucker <tom@opengridcomputing.com> |
| */ |
| |
| #include <linux/interrupt.h> |
| #include <linux/sched.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| #include <linux/workqueue.h> |
| #include <linux/export.h> |
| |
| #include <rdma/ib_verbs.h> |
| #include <rdma/rdma_cm.h> |
| #include <rdma/rw.h> |
| |
| #include <linux/sunrpc/addr.h> |
| #include <linux/sunrpc/debug.h> |
| #include <linux/sunrpc/svc_xprt.h> |
| #include <linux/sunrpc/svc_rdma.h> |
| |
| #include "xprt_rdma.h" |
| #include <trace/events/rpcrdma.h> |
| |
| #define RPCDBG_FACILITY RPCDBG_SVCXPRT |
| |
| static struct svcxprt_rdma *svc_rdma_create_xprt(struct svc_serv *serv, |
| struct net *net, int node); |
| static struct svc_xprt *svc_rdma_create(struct svc_serv *serv, |
| struct net *net, |
| struct sockaddr *sa, int salen, |
| int flags); |
| static struct svc_xprt *svc_rdma_accept(struct svc_xprt *xprt); |
| static void svc_rdma_detach(struct svc_xprt *xprt); |
| static void svc_rdma_free(struct svc_xprt *xprt); |
| static int svc_rdma_has_wspace(struct svc_xprt *xprt); |
| static void svc_rdma_kill_temp_xprt(struct svc_xprt *); |
| |
| static const struct svc_xprt_ops svc_rdma_ops = { |
| .xpo_create = svc_rdma_create, |
| .xpo_recvfrom = svc_rdma_recvfrom, |
| .xpo_sendto = svc_rdma_sendto, |
| .xpo_result_payload = svc_rdma_result_payload, |
| .xpo_release_ctxt = svc_rdma_release_ctxt, |
| .xpo_detach = svc_rdma_detach, |
| .xpo_free = svc_rdma_free, |
| .xpo_has_wspace = svc_rdma_has_wspace, |
| .xpo_accept = svc_rdma_accept, |
| .xpo_kill_temp_xprt = svc_rdma_kill_temp_xprt, |
| }; |
| |
| struct svc_xprt_class svc_rdma_class = { |
| .xcl_name = "rdma", |
| .xcl_owner = THIS_MODULE, |
| .xcl_ops = &svc_rdma_ops, |
| .xcl_max_payload = RPCSVC_MAXPAYLOAD_RDMA, |
| .xcl_ident = XPRT_TRANSPORT_RDMA, |
| }; |
| |
| /* QP event handler */ |
| static void qp_event_handler(struct ib_event *event, void *context) |
| { |
| struct svc_xprt *xprt = context; |
| |
| trace_svcrdma_qp_error(event, (struct sockaddr *)&xprt->xpt_remote); |
| switch (event->event) { |
| /* These are considered benign events */ |
| case IB_EVENT_PATH_MIG: |
| case IB_EVENT_COMM_EST: |
| case IB_EVENT_SQ_DRAINED: |
| case IB_EVENT_QP_LAST_WQE_REACHED: |
| break; |
| |
| /* These are considered fatal events */ |
| case IB_EVENT_PATH_MIG_ERR: |
| case IB_EVENT_QP_FATAL: |
| case IB_EVENT_QP_REQ_ERR: |
| case IB_EVENT_QP_ACCESS_ERR: |
| case IB_EVENT_DEVICE_FATAL: |
| default: |
| svc_xprt_deferred_close(xprt); |
| break; |
| } |
| } |
| |
| static struct svcxprt_rdma *svc_rdma_create_xprt(struct svc_serv *serv, |
| struct net *net, int node) |
| { |
| static struct lock_class_key svcrdma_rwctx_lock; |
| static struct lock_class_key svcrdma_sctx_lock; |
| static struct lock_class_key svcrdma_dto_lock; |
| struct svcxprt_rdma *cma_xprt; |
| |
| cma_xprt = kzalloc_node(sizeof(*cma_xprt), GFP_KERNEL, node); |
| if (!cma_xprt) |
| return NULL; |
| |
| svc_xprt_init(net, &svc_rdma_class, &cma_xprt->sc_xprt, serv); |
| INIT_LIST_HEAD(&cma_xprt->sc_accept_q); |
| INIT_LIST_HEAD(&cma_xprt->sc_rq_dto_q); |
| INIT_LIST_HEAD(&cma_xprt->sc_read_complete_q); |
| init_llist_head(&cma_xprt->sc_send_ctxts); |
| init_llist_head(&cma_xprt->sc_recv_ctxts); |
| init_llist_head(&cma_xprt->sc_rw_ctxts); |
| init_waitqueue_head(&cma_xprt->sc_send_wait); |
| |
| spin_lock_init(&cma_xprt->sc_lock); |
| spin_lock_init(&cma_xprt->sc_rq_dto_lock); |
| lockdep_set_class(&cma_xprt->sc_rq_dto_lock, &svcrdma_dto_lock); |
| spin_lock_init(&cma_xprt->sc_send_lock); |
| lockdep_set_class(&cma_xprt->sc_send_lock, &svcrdma_sctx_lock); |
| spin_lock_init(&cma_xprt->sc_rw_ctxt_lock); |
| lockdep_set_class(&cma_xprt->sc_rw_ctxt_lock, &svcrdma_rwctx_lock); |
| |
| /* |
| * Note that this implies that the underlying transport support |
| * has some form of congestion control (see RFC 7530 section 3.1 |
| * paragraph 2). For now, we assume that all supported RDMA |
| * transports are suitable here. |
| */ |
| set_bit(XPT_CONG_CTRL, &cma_xprt->sc_xprt.xpt_flags); |
| |
| return cma_xprt; |
| } |
| |
| static void |
| svc_rdma_parse_connect_private(struct svcxprt_rdma *newxprt, |
| struct rdma_conn_param *param) |
| { |
| const struct rpcrdma_connect_private *pmsg = param->private_data; |
| |
| if (pmsg && |
| pmsg->cp_magic == rpcrdma_cmp_magic && |
| pmsg->cp_version == RPCRDMA_CMP_VERSION) { |
| newxprt->sc_snd_w_inv = pmsg->cp_flags & |
| RPCRDMA_CMP_F_SND_W_INV_OK; |
| |
| dprintk("svcrdma: client send_size %u, recv_size %u " |
| "remote inv %ssupported\n", |
| rpcrdma_decode_buffer_size(pmsg->cp_send_size), |
| rpcrdma_decode_buffer_size(pmsg->cp_recv_size), |
| newxprt->sc_snd_w_inv ? "" : "un"); |
| } |
| } |
| |
| /* |
| * This function handles the CONNECT_REQUEST event on a listening |
| * endpoint. It is passed the cma_id for the _new_ connection. The context in |
| * this cma_id is inherited from the listening cma_id and is the svc_xprt |
| * structure for the listening endpoint. |
| * |
| * This function creates a new xprt for the new connection and enqueues it on |
| * the accept queue for the listent xprt. When the listen thread is kicked, it |
| * will call the recvfrom method on the listen xprt which will accept the new |
| * connection. |
| */ |
| static void handle_connect_req(struct rdma_cm_id *new_cma_id, |
| struct rdma_conn_param *param) |
| { |
| struct svcxprt_rdma *listen_xprt = new_cma_id->context; |
| struct svcxprt_rdma *newxprt; |
| struct sockaddr *sa; |
| |
| newxprt = svc_rdma_create_xprt(listen_xprt->sc_xprt.xpt_server, |
| listen_xprt->sc_xprt.xpt_net, |
| ibdev_to_node(new_cma_id->device)); |
| if (!newxprt) |
| return; |
| newxprt->sc_cm_id = new_cma_id; |
| new_cma_id->context = newxprt; |
| svc_rdma_parse_connect_private(newxprt, param); |
| |
| /* Save client advertised inbound read limit for use later in accept. */ |
| newxprt->sc_ord = param->initiator_depth; |
| |
| sa = (struct sockaddr *)&newxprt->sc_cm_id->route.addr.dst_addr; |
| newxprt->sc_xprt.xpt_remotelen = svc_addr_len(sa); |
| memcpy(&newxprt->sc_xprt.xpt_remote, sa, |
| newxprt->sc_xprt.xpt_remotelen); |
| snprintf(newxprt->sc_xprt.xpt_remotebuf, |
| sizeof(newxprt->sc_xprt.xpt_remotebuf) - 1, "%pISc", sa); |
| |
| /* The remote port is arbitrary and not under the control of the |
| * client ULP. Set it to a fixed value so that the DRC continues |
| * to be effective after a reconnect. |
| */ |
| rpc_set_port((struct sockaddr *)&newxprt->sc_xprt.xpt_remote, 0); |
| |
| sa = (struct sockaddr *)&newxprt->sc_cm_id->route.addr.src_addr; |
| svc_xprt_set_local(&newxprt->sc_xprt, sa, svc_addr_len(sa)); |
| |
| /* |
| * Enqueue the new transport on the accept queue of the listening |
| * transport |
| */ |
| spin_lock(&listen_xprt->sc_lock); |
| list_add_tail(&newxprt->sc_accept_q, &listen_xprt->sc_accept_q); |
| spin_unlock(&listen_xprt->sc_lock); |
| |
| set_bit(XPT_CONN, &listen_xprt->sc_xprt.xpt_flags); |
| svc_xprt_enqueue(&listen_xprt->sc_xprt); |
| } |
| |
| /** |
| * svc_rdma_listen_handler - Handle CM events generated on a listening endpoint |
| * @cma_id: the server's listener rdma_cm_id |
| * @event: details of the event |
| * |
| * Return values: |
| * %0: Do not destroy @cma_id |
| * %1: Destroy @cma_id (never returned here) |
| * |
| * NB: There is never a DEVICE_REMOVAL event for INADDR_ANY listeners. |
| */ |
| static int svc_rdma_listen_handler(struct rdma_cm_id *cma_id, |
| struct rdma_cm_event *event) |
| { |
| switch (event->event) { |
| case RDMA_CM_EVENT_CONNECT_REQUEST: |
| handle_connect_req(cma_id, &event->param.conn); |
| break; |
| default: |
| break; |
| } |
| return 0; |
| } |
| |
| /** |
| * svc_rdma_cma_handler - Handle CM events on client connections |
| * @cma_id: the server's listener rdma_cm_id |
| * @event: details of the event |
| * |
| * Return values: |
| * %0: Do not destroy @cma_id |
| * %1: Destroy @cma_id (never returned here) |
| */ |
| static int svc_rdma_cma_handler(struct rdma_cm_id *cma_id, |
| struct rdma_cm_event *event) |
| { |
| struct svcxprt_rdma *rdma = cma_id->context; |
| struct svc_xprt *xprt = &rdma->sc_xprt; |
| |
| switch (event->event) { |
| case RDMA_CM_EVENT_ESTABLISHED: |
| clear_bit(RDMAXPRT_CONN_PENDING, &rdma->sc_flags); |
| |
| /* Handle any requests that were received while |
| * CONN_PENDING was set. */ |
| svc_xprt_enqueue(xprt); |
| break; |
| case RDMA_CM_EVENT_DISCONNECTED: |
| case RDMA_CM_EVENT_DEVICE_REMOVAL: |
| svc_xprt_deferred_close(xprt); |
| break; |
| default: |
| break; |
| } |
| return 0; |
| } |
| |
| /* |
| * Create a listening RDMA service endpoint. |
| */ |
| static struct svc_xprt *svc_rdma_create(struct svc_serv *serv, |
| struct net *net, |
| struct sockaddr *sa, int salen, |
| int flags) |
| { |
| struct rdma_cm_id *listen_id; |
| struct svcxprt_rdma *cma_xprt; |
| int ret; |
| |
| if (sa->sa_family != AF_INET && sa->sa_family != AF_INET6) |
| return ERR_PTR(-EAFNOSUPPORT); |
| cma_xprt = svc_rdma_create_xprt(serv, net, NUMA_NO_NODE); |
| if (!cma_xprt) |
| return ERR_PTR(-ENOMEM); |
| set_bit(XPT_LISTENER, &cma_xprt->sc_xprt.xpt_flags); |
| strcpy(cma_xprt->sc_xprt.xpt_remotebuf, "listener"); |
| |
| listen_id = rdma_create_id(net, svc_rdma_listen_handler, cma_xprt, |
| RDMA_PS_TCP, IB_QPT_RC); |
| if (IS_ERR(listen_id)) { |
| ret = PTR_ERR(listen_id); |
| goto err0; |
| } |
| |
| /* Allow both IPv4 and IPv6 sockets to bind a single port |
| * at the same time. |
| */ |
| #if IS_ENABLED(CONFIG_IPV6) |
| ret = rdma_set_afonly(listen_id, 1); |
| if (ret) |
| goto err1; |
| #endif |
| ret = rdma_bind_addr(listen_id, sa); |
| if (ret) |
| goto err1; |
| cma_xprt->sc_cm_id = listen_id; |
| |
| ret = rdma_listen(listen_id, RPCRDMA_LISTEN_BACKLOG); |
| if (ret) |
| goto err1; |
| |
| /* |
| * We need to use the address from the cm_id in case the |
| * caller specified 0 for the port number. |
| */ |
| sa = (struct sockaddr *)&cma_xprt->sc_cm_id->route.addr.src_addr; |
| svc_xprt_set_local(&cma_xprt->sc_xprt, sa, salen); |
| |
| return &cma_xprt->sc_xprt; |
| |
| err1: |
| rdma_destroy_id(listen_id); |
| err0: |
| kfree(cma_xprt); |
| return ERR_PTR(ret); |
| } |
| |
| /* |
| * This is the xpo_recvfrom function for listening endpoints. Its |
| * purpose is to accept incoming connections. The CMA callback handler |
| * has already created a new transport and attached it to the new CMA |
| * ID. |
| * |
| * There is a queue of pending connections hung on the listening |
| * transport. This queue contains the new svc_xprt structure. This |
| * function takes svc_xprt structures off the accept_q and completes |
| * the connection. |
| */ |
| static struct svc_xprt *svc_rdma_accept(struct svc_xprt *xprt) |
| { |
| struct svcxprt_rdma *listen_rdma; |
| struct svcxprt_rdma *newxprt = NULL; |
| struct rdma_conn_param conn_param; |
| struct rpcrdma_connect_private pmsg; |
| struct ib_qp_init_attr qp_attr; |
| unsigned int ctxts, rq_depth; |
| struct ib_device *dev; |
| int ret = 0; |
| RPC_IFDEBUG(struct sockaddr *sap); |
| |
| listen_rdma = container_of(xprt, struct svcxprt_rdma, sc_xprt); |
| clear_bit(XPT_CONN, &xprt->xpt_flags); |
| /* Get the next entry off the accept list */ |
| spin_lock(&listen_rdma->sc_lock); |
| if (!list_empty(&listen_rdma->sc_accept_q)) { |
| newxprt = list_entry(listen_rdma->sc_accept_q.next, |
| struct svcxprt_rdma, sc_accept_q); |
| list_del_init(&newxprt->sc_accept_q); |
| } |
| if (!list_empty(&listen_rdma->sc_accept_q)) |
| set_bit(XPT_CONN, &listen_rdma->sc_xprt.xpt_flags); |
| spin_unlock(&listen_rdma->sc_lock); |
| if (!newxprt) |
| return NULL; |
| |
| dev = newxprt->sc_cm_id->device; |
| newxprt->sc_port_num = newxprt->sc_cm_id->port_num; |
| |
| newxprt->sc_max_req_size = svcrdma_max_req_size; |
| newxprt->sc_max_requests = svcrdma_max_requests; |
| newxprt->sc_max_bc_requests = svcrdma_max_bc_requests; |
| newxprt->sc_recv_batch = RPCRDMA_MAX_RECV_BATCH; |
| newxprt->sc_fc_credits = cpu_to_be32(newxprt->sc_max_requests); |
| |
| /* Qualify the transport's resource defaults with the |
| * capabilities of this particular device. |
| */ |
| |
| /* Transport header, head iovec, tail iovec */ |
| newxprt->sc_max_send_sges = 3; |
| /* Add one SGE per page list entry */ |
| newxprt->sc_max_send_sges += (svcrdma_max_req_size / PAGE_SIZE) + 1; |
| if (newxprt->sc_max_send_sges > dev->attrs.max_send_sge) |
| newxprt->sc_max_send_sges = dev->attrs.max_send_sge; |
| rq_depth = newxprt->sc_max_requests + newxprt->sc_max_bc_requests + |
| newxprt->sc_recv_batch + 1 /* drain */; |
| if (rq_depth > dev->attrs.max_qp_wr) { |
| rq_depth = dev->attrs.max_qp_wr; |
| newxprt->sc_recv_batch = 1; |
| newxprt->sc_max_requests = rq_depth - 2; |
| newxprt->sc_max_bc_requests = 2; |
| } |
| |
| /* Arbitrarily estimate the number of rw_ctxs needed for |
| * this transport. This is enough rw_ctxs to make forward |
| * progress even if the client is using one rkey per page |
| * in each Read chunk. |
| */ |
| ctxts = 3 * RPCSVC_MAXPAGES; |
| newxprt->sc_sq_depth = rq_depth + ctxts; |
| if (newxprt->sc_sq_depth > dev->attrs.max_qp_wr) |
| newxprt->sc_sq_depth = dev->attrs.max_qp_wr; |
| atomic_set(&newxprt->sc_sq_avail, newxprt->sc_sq_depth); |
| |
| newxprt->sc_pd = ib_alloc_pd(dev, 0); |
| if (IS_ERR(newxprt->sc_pd)) { |
| trace_svcrdma_pd_err(newxprt, PTR_ERR(newxprt->sc_pd)); |
| goto errout; |
| } |
| newxprt->sc_sq_cq = ib_alloc_cq_any(dev, newxprt, newxprt->sc_sq_depth, |
| IB_POLL_WORKQUEUE); |
| if (IS_ERR(newxprt->sc_sq_cq)) |
| goto errout; |
| newxprt->sc_rq_cq = |
| ib_alloc_cq_any(dev, newxprt, rq_depth, IB_POLL_WORKQUEUE); |
| if (IS_ERR(newxprt->sc_rq_cq)) |
| goto errout; |
| |
| memset(&qp_attr, 0, sizeof qp_attr); |
| qp_attr.event_handler = qp_event_handler; |
| qp_attr.qp_context = &newxprt->sc_xprt; |
| qp_attr.port_num = newxprt->sc_port_num; |
| qp_attr.cap.max_rdma_ctxs = ctxts; |
| qp_attr.cap.max_send_wr = newxprt->sc_sq_depth - ctxts; |
| qp_attr.cap.max_recv_wr = rq_depth; |
| qp_attr.cap.max_send_sge = newxprt->sc_max_send_sges; |
| qp_attr.cap.max_recv_sge = 1; |
| qp_attr.sq_sig_type = IB_SIGNAL_REQ_WR; |
| qp_attr.qp_type = IB_QPT_RC; |
| qp_attr.send_cq = newxprt->sc_sq_cq; |
| qp_attr.recv_cq = newxprt->sc_rq_cq; |
| dprintk(" cap.max_send_wr = %d, cap.max_recv_wr = %d\n", |
| qp_attr.cap.max_send_wr, qp_attr.cap.max_recv_wr); |
| dprintk(" cap.max_send_sge = %d, cap.max_recv_sge = %d\n", |
| qp_attr.cap.max_send_sge, qp_attr.cap.max_recv_sge); |
| dprintk(" send CQ depth = %u, recv CQ depth = %u\n", |
| newxprt->sc_sq_depth, rq_depth); |
| ret = rdma_create_qp(newxprt->sc_cm_id, newxprt->sc_pd, &qp_attr); |
| if (ret) { |
| trace_svcrdma_qp_err(newxprt, ret); |
| goto errout; |
| } |
| newxprt->sc_max_send_sges = qp_attr.cap.max_send_sge; |
| newxprt->sc_qp = newxprt->sc_cm_id->qp; |
| |
| if (!(dev->attrs.device_cap_flags & IB_DEVICE_MEM_MGT_EXTENSIONS)) |
| newxprt->sc_snd_w_inv = false; |
| if (!rdma_protocol_iwarp(dev, newxprt->sc_port_num) && |
| !rdma_ib_or_roce(dev, newxprt->sc_port_num)) { |
| trace_svcrdma_fabric_err(newxprt, -EINVAL); |
| goto errout; |
| } |
| |
| if (!svc_rdma_post_recvs(newxprt)) |
| goto errout; |
| |
| /* Construct RDMA-CM private message */ |
| pmsg.cp_magic = rpcrdma_cmp_magic; |
| pmsg.cp_version = RPCRDMA_CMP_VERSION; |
| pmsg.cp_flags = 0; |
| pmsg.cp_send_size = pmsg.cp_recv_size = |
| rpcrdma_encode_buffer_size(newxprt->sc_max_req_size); |
| |
| /* Accept Connection */ |
| set_bit(RDMAXPRT_CONN_PENDING, &newxprt->sc_flags); |
| memset(&conn_param, 0, sizeof conn_param); |
| conn_param.responder_resources = 0; |
| conn_param.initiator_depth = min_t(int, newxprt->sc_ord, |
| dev->attrs.max_qp_init_rd_atom); |
| if (!conn_param.initiator_depth) { |
| ret = -EINVAL; |
| trace_svcrdma_initdepth_err(newxprt, ret); |
| goto errout; |
| } |
| conn_param.private_data = &pmsg; |
| conn_param.private_data_len = sizeof(pmsg); |
| rdma_lock_handler(newxprt->sc_cm_id); |
| newxprt->sc_cm_id->event_handler = svc_rdma_cma_handler; |
| ret = rdma_accept(newxprt->sc_cm_id, &conn_param); |
| rdma_unlock_handler(newxprt->sc_cm_id); |
| if (ret) { |
| trace_svcrdma_accept_err(newxprt, ret); |
| goto errout; |
| } |
| |
| #if IS_ENABLED(CONFIG_SUNRPC_DEBUG) |
| dprintk("svcrdma: new connection accepted on device %s:\n", dev->name); |
| sap = (struct sockaddr *)&newxprt->sc_cm_id->route.addr.src_addr; |
| dprintk(" local address : %pIS:%u\n", sap, rpc_get_port(sap)); |
| sap = (struct sockaddr *)&newxprt->sc_cm_id->route.addr.dst_addr; |
| dprintk(" remote address : %pIS:%u\n", sap, rpc_get_port(sap)); |
| dprintk(" max_sge : %d\n", newxprt->sc_max_send_sges); |
| dprintk(" sq_depth : %d\n", newxprt->sc_sq_depth); |
| dprintk(" rdma_rw_ctxs : %d\n", ctxts); |
| dprintk(" max_requests : %d\n", newxprt->sc_max_requests); |
| dprintk(" ord : %d\n", conn_param.initiator_depth); |
| #endif |
| |
| return &newxprt->sc_xprt; |
| |
| errout: |
| /* Take a reference in case the DTO handler runs */ |
| svc_xprt_get(&newxprt->sc_xprt); |
| if (newxprt->sc_qp && !IS_ERR(newxprt->sc_qp)) |
| ib_destroy_qp(newxprt->sc_qp); |
| rdma_destroy_id(newxprt->sc_cm_id); |
| /* This call to put will destroy the transport */ |
| svc_xprt_put(&newxprt->sc_xprt); |
| return NULL; |
| } |
| |
| static void svc_rdma_detach(struct svc_xprt *xprt) |
| { |
| struct svcxprt_rdma *rdma = |
| container_of(xprt, struct svcxprt_rdma, sc_xprt); |
| |
| rdma_disconnect(rdma->sc_cm_id); |
| } |
| |
| static void __svc_rdma_free(struct work_struct *work) |
| { |
| struct svcxprt_rdma *rdma = |
| container_of(work, struct svcxprt_rdma, sc_work); |
| |
| /* This blocks until the Completion Queues are empty */ |
| if (rdma->sc_qp && !IS_ERR(rdma->sc_qp)) |
| ib_drain_qp(rdma->sc_qp); |
| flush_workqueue(svcrdma_wq); |
| |
| svc_rdma_flush_recv_queues(rdma); |
| |
| svc_rdma_destroy_rw_ctxts(rdma); |
| svc_rdma_send_ctxts_destroy(rdma); |
| svc_rdma_recv_ctxts_destroy(rdma); |
| |
| /* Destroy the QP if present (not a listener) */ |
| if (rdma->sc_qp && !IS_ERR(rdma->sc_qp)) |
| ib_destroy_qp(rdma->sc_qp); |
| |
| if (rdma->sc_sq_cq && !IS_ERR(rdma->sc_sq_cq)) |
| ib_free_cq(rdma->sc_sq_cq); |
| |
| if (rdma->sc_rq_cq && !IS_ERR(rdma->sc_rq_cq)) |
| ib_free_cq(rdma->sc_rq_cq); |
| |
| if (rdma->sc_pd && !IS_ERR(rdma->sc_pd)) |
| ib_dealloc_pd(rdma->sc_pd); |
| |
| /* Destroy the CM ID */ |
| rdma_destroy_id(rdma->sc_cm_id); |
| |
| kfree(rdma); |
| } |
| |
| static void svc_rdma_free(struct svc_xprt *xprt) |
| { |
| struct svcxprt_rdma *rdma = |
| container_of(xprt, struct svcxprt_rdma, sc_xprt); |
| |
| INIT_WORK(&rdma->sc_work, __svc_rdma_free); |
| schedule_work(&rdma->sc_work); |
| } |
| |
| static int svc_rdma_has_wspace(struct svc_xprt *xprt) |
| { |
| struct svcxprt_rdma *rdma = |
| container_of(xprt, struct svcxprt_rdma, sc_xprt); |
| |
| /* |
| * If there are already waiters on the SQ, |
| * return false. |
| */ |
| if (waitqueue_active(&rdma->sc_send_wait)) |
| return 0; |
| |
| /* Otherwise return true. */ |
| return 1; |
| } |
| |
| static void svc_rdma_kill_temp_xprt(struct svc_xprt *xprt) |
| { |
| } |