| /* |
| * Copyright 2011 Tilera Corporation. All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation, version 2. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or |
| * NON INFRINGEMENT. See the GNU General Public License for |
| * more details. |
| * Tilera-specific EDAC driver. |
| * |
| * This source code is derived from the following driver: |
| * |
| * Cell MIC driver for ECC counting |
| * |
| * Copyright 2007 Benjamin Herrenschmidt, IBM Corp. |
| * <benh@kernel.crashing.org> |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/uaccess.h> |
| #include <linux/edac.h> |
| #include <hv/hypervisor.h> |
| #include <hv/drv_mshim_intf.h> |
| |
| #include "edac_core.h" |
| |
| #define DRV_NAME "tile-edac" |
| |
| /* Number of cs_rows needed per memory controller on TILEPro. */ |
| #define TILE_EDAC_NR_CSROWS 1 |
| |
| /* Number of channels per memory controller on TILEPro. */ |
| #define TILE_EDAC_NR_CHANS 1 |
| |
| /* Granularity of reported error in bytes on TILEPro. */ |
| #define TILE_EDAC_ERROR_GRAIN 8 |
| |
| /* TILE processor has multiple independent memory controllers. */ |
| struct platform_device *mshim_pdev[TILE_MAX_MSHIMS]; |
| |
| struct tile_edac_priv { |
| int hv_devhdl; /* Hypervisor device handle. */ |
| int node; /* Memory controller instance #. */ |
| unsigned int ce_count; /* |
| * Correctable-error counter |
| * kept by the driver. |
| */ |
| }; |
| |
| static void tile_edac_check(struct mem_ctl_info *mci) |
| { |
| struct tile_edac_priv *priv = mci->pvt_info; |
| struct mshim_mem_error mem_error; |
| |
| if (hv_dev_pread(priv->hv_devhdl, 0, (HV_VirtAddr)&mem_error, |
| sizeof(struct mshim_mem_error), MSHIM_MEM_ERROR_OFF) != |
| sizeof(struct mshim_mem_error)) { |
| pr_err(DRV_NAME ": MSHIM_MEM_ERROR_OFF pread failure.\n"); |
| return; |
| } |
| |
| /* Check if the current error count is different from the saved one. */ |
| if (mem_error.sbe_count != priv->ce_count) { |
| dev_dbg(mci->dev, "ECC CE err on node %d\n", priv->node); |
| priv->ce_count = mem_error.sbe_count; |
| edac_mc_handle_ce(mci, 0, 0, 0, 0, 0, mci->ctl_name); |
| } |
| } |
| |
| /* |
| * Initialize the 'csrows' table within the mci control structure with the |
| * addressing of memory. |
| */ |
| static int __devinit tile_edac_init_csrows(struct mem_ctl_info *mci) |
| { |
| struct csrow_info *csrow = &mci->csrows[0]; |
| struct tile_edac_priv *priv = mci->pvt_info; |
| struct mshim_mem_info mem_info; |
| struct dimm_info *dimm = csrow->channels[0].dimm; |
| |
| if (hv_dev_pread(priv->hv_devhdl, 0, (HV_VirtAddr)&mem_info, |
| sizeof(struct mshim_mem_info), MSHIM_MEM_INFO_OFF) != |
| sizeof(struct mshim_mem_info)) { |
| pr_err(DRV_NAME ": MSHIM_MEM_INFO_OFF pread failure.\n"); |
| return -1; |
| } |
| |
| if (mem_info.mem_ecc) |
| dimm->edac_mode = EDAC_SECDED; |
| else |
| dimm->edac_mode = EDAC_NONE; |
| switch (mem_info.mem_type) { |
| case DDR2: |
| dimm->mtype = MEM_DDR2; |
| break; |
| |
| case DDR3: |
| dimm->mtype = MEM_DDR3; |
| break; |
| |
| default: |
| return -1; |
| } |
| |
| csrow->nr_pages = mem_info.mem_size >> PAGE_SHIFT; |
| dimm->grain = TILE_EDAC_ERROR_GRAIN; |
| dimm->dtype = DEV_UNKNOWN; |
| |
| return 0; |
| } |
| |
| static int __devinit tile_edac_mc_probe(struct platform_device *pdev) |
| { |
| char hv_file[32]; |
| int hv_devhdl; |
| struct mem_ctl_info *mci; |
| struct tile_edac_priv *priv; |
| int rc; |
| |
| sprintf(hv_file, "mshim/%d", pdev->id); |
| hv_devhdl = hv_dev_open((HV_VirtAddr)hv_file, 0); |
| if (hv_devhdl < 0) |
| return -EINVAL; |
| |
| /* A TILE MC has a single channel and one chip-select row. */ |
| mci = edac_mc_alloc(sizeof(struct tile_edac_priv), |
| TILE_EDAC_NR_CSROWS, TILE_EDAC_NR_CHANS, pdev->id); |
| if (mci == NULL) |
| return -ENOMEM; |
| priv = mci->pvt_info; |
| priv->node = pdev->id; |
| priv->hv_devhdl = hv_devhdl; |
| |
| mci->dev = &pdev->dev; |
| mci->mtype_cap = MEM_FLAG_DDR2; |
| mci->edac_ctl_cap = EDAC_FLAG_SECDED; |
| |
| mci->mod_name = DRV_NAME; |
| #ifdef __tilegx__ |
| mci->ctl_name = "TILEGx_Memory_Controller"; |
| #else |
| mci->ctl_name = "TILEPro_Memory_Controller"; |
| #endif |
| mci->dev_name = dev_name(&pdev->dev); |
| mci->edac_check = tile_edac_check; |
| |
| /* |
| * Initialize the MC control structure 'csrows' table |
| * with the mapping and control information. |
| */ |
| if (tile_edac_init_csrows(mci)) { |
| /* No csrows found. */ |
| mci->edac_cap = EDAC_FLAG_NONE; |
| } else { |
| mci->edac_cap = EDAC_FLAG_SECDED; |
| } |
| |
| platform_set_drvdata(pdev, mci); |
| |
| /* Register with EDAC core */ |
| rc = edac_mc_add_mc(mci); |
| if (rc) { |
| dev_err(&pdev->dev, "failed to register with EDAC core\n"); |
| edac_mc_free(mci); |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| static int __devexit tile_edac_mc_remove(struct platform_device *pdev) |
| { |
| struct mem_ctl_info *mci = platform_get_drvdata(pdev); |
| |
| edac_mc_del_mc(&pdev->dev); |
| if (mci) |
| edac_mc_free(mci); |
| return 0; |
| } |
| |
| static struct platform_driver tile_edac_mc_driver = { |
| .driver = { |
| .name = DRV_NAME, |
| .owner = THIS_MODULE, |
| }, |
| .probe = tile_edac_mc_probe, |
| .remove = __devexit_p(tile_edac_mc_remove), |
| }; |
| |
| /* |
| * Driver init routine. |
| */ |
| static int __init tile_edac_init(void) |
| { |
| char hv_file[32]; |
| struct platform_device *pdev; |
| int i, err, num = 0; |
| |
| /* Only support POLL mode. */ |
| edac_op_state = EDAC_OPSTATE_POLL; |
| |
| err = platform_driver_register(&tile_edac_mc_driver); |
| if (err) |
| return err; |
| |
| for (i = 0; i < TILE_MAX_MSHIMS; i++) { |
| /* |
| * Not all memory controllers are configured such as in the |
| * case of a simulator. So we register only those mshims |
| * that are configured by the hypervisor. |
| */ |
| sprintf(hv_file, "mshim/%d", i); |
| if (hv_dev_open((HV_VirtAddr)hv_file, 0) < 0) |
| continue; |
| |
| pdev = platform_device_register_simple(DRV_NAME, i, NULL, 0); |
| if (IS_ERR(pdev)) |
| continue; |
| mshim_pdev[i] = pdev; |
| num++; |
| } |
| |
| if (num == 0) { |
| platform_driver_unregister(&tile_edac_mc_driver); |
| return -ENODEV; |
| } |
| return 0; |
| } |
| |
| /* |
| * Driver cleanup routine. |
| */ |
| static void __exit tile_edac_exit(void) |
| { |
| int i; |
| |
| for (i = 0; i < TILE_MAX_MSHIMS; i++) { |
| struct platform_device *pdev = mshim_pdev[i]; |
| if (!pdev) |
| continue; |
| |
| platform_set_drvdata(pdev, NULL); |
| platform_device_unregister(pdev); |
| } |
| platform_driver_unregister(&tile_edac_mc_driver); |
| } |
| |
| module_init(tile_edac_init); |
| module_exit(tile_edac_exit); |