| /* SPDX-License-Identifier: GPL-2.0-only */ |
| /* |
| * Copyright (C) 2013-2014, Linaro Ltd. |
| * Author: Al Stone <al.stone@linaro.org> |
| * Author: Graeme Gregory <graeme.gregory@linaro.org> |
| * Author: Hanjun Guo <hanjun.guo@linaro.org> |
| */ |
| |
| #ifndef _ASM_ACPI_H |
| #define _ASM_ACPI_H |
| |
| #include <linux/efi.h> |
| #include <linux/memblock.h> |
| #include <linux/psci.h> |
| #include <linux/stddef.h> |
| |
| #include <asm/cputype.h> |
| #include <asm/io.h> |
| #include <asm/ptrace.h> |
| #include <asm/smp_plat.h> |
| #include <asm/tlbflush.h> |
| |
| /* Macros for consistency checks of the GICC subtable of MADT */ |
| |
| /* |
| * MADT GICC minimum length refers to the MADT GICC structure table length as |
| * defined in the earliest ACPI version supported on arm64, ie ACPI 5.1. |
| * |
| * The efficiency_class member was added to the |
| * struct acpi_madt_generic_interrupt to represent the MADT GICC structure |
| * "Processor Power Efficiency Class" field, added in ACPI 6.0 whose offset |
| * is therefore used to delimit the MADT GICC structure minimum length |
| * appropriately. |
| */ |
| #define ACPI_MADT_GICC_MIN_LENGTH offsetof( \ |
| struct acpi_madt_generic_interrupt, efficiency_class) |
| |
| #define BAD_MADT_GICC_ENTRY(entry, end) \ |
| (!(entry) || (entry)->header.length < ACPI_MADT_GICC_MIN_LENGTH || \ |
| (unsigned long)(entry) + (entry)->header.length > (end)) |
| |
| #define ACPI_MADT_GICC_SPE (offsetof(struct acpi_madt_generic_interrupt, \ |
| spe_interrupt) + sizeof(u16)) |
| |
| /* Basic configuration for ACPI */ |
| #ifdef CONFIG_ACPI |
| pgprot_t __acpi_get_mem_attribute(phys_addr_t addr); |
| |
| /* ACPI table mapping after acpi_permanent_mmap is set */ |
| void __iomem *acpi_os_ioremap(acpi_physical_address phys, acpi_size size); |
| #define acpi_os_ioremap acpi_os_ioremap |
| |
| typedef u64 phys_cpuid_t; |
| #define PHYS_CPUID_INVALID INVALID_HWID |
| |
| #define acpi_strict 1 /* No out-of-spec workarounds on ARM64 */ |
| extern int acpi_disabled; |
| extern int acpi_noirq; |
| extern int acpi_pci_disabled; |
| |
| static inline void disable_acpi(void) |
| { |
| acpi_disabled = 1; |
| acpi_pci_disabled = 1; |
| acpi_noirq = 1; |
| } |
| |
| static inline void enable_acpi(void) |
| { |
| acpi_disabled = 0; |
| acpi_pci_disabled = 0; |
| acpi_noirq = 0; |
| } |
| |
| /* |
| * The ACPI processor driver for ACPI core code needs this macro |
| * to find out this cpu was already mapped (mapping from CPU hardware |
| * ID to CPU logical ID) or not. |
| */ |
| #define cpu_physical_id(cpu) cpu_logical_map(cpu) |
| |
| /* |
| * It's used from ACPI core in kdump to boot UP system with SMP kernel, |
| * with this check the ACPI core will not override the CPU index |
| * obtained from GICC with 0 and not print some error message as well. |
| * Since MADT must provide at least one GICC structure for GIC |
| * initialization, CPU will be always available in MADT on ARM64. |
| */ |
| static inline bool acpi_has_cpu_in_madt(void) |
| { |
| return true; |
| } |
| |
| struct acpi_madt_generic_interrupt *acpi_cpu_get_madt_gicc(int cpu); |
| static inline u32 get_acpi_id_for_cpu(unsigned int cpu) |
| { |
| return acpi_cpu_get_madt_gicc(cpu)->uid; |
| } |
| |
| static inline void arch_fix_phys_package_id(int num, u32 slot) { } |
| void __init acpi_init_cpus(void); |
| int apei_claim_sea(struct pt_regs *regs); |
| #else |
| static inline void acpi_init_cpus(void) { } |
| static inline int apei_claim_sea(struct pt_regs *regs) { return -ENOENT; } |
| #endif /* CONFIG_ACPI */ |
| |
| #ifdef CONFIG_ARM64_ACPI_PARKING_PROTOCOL |
| bool acpi_parking_protocol_valid(int cpu); |
| void __init |
| acpi_set_mailbox_entry(int cpu, struct acpi_madt_generic_interrupt *processor); |
| #else |
| static inline bool acpi_parking_protocol_valid(int cpu) { return false; } |
| static inline void |
| acpi_set_mailbox_entry(int cpu, struct acpi_madt_generic_interrupt *processor) |
| {} |
| #endif |
| |
| static inline const char *acpi_get_enable_method(int cpu) |
| { |
| if (acpi_psci_present()) |
| return "psci"; |
| |
| if (acpi_parking_protocol_valid(cpu)) |
| return "parking-protocol"; |
| |
| return NULL; |
| } |
| |
| #ifdef CONFIG_ACPI_APEI |
| /* |
| * acpi_disable_cmcff is used in drivers/acpi/apei/hest.c for disabling |
| * IA-32 Architecture Corrected Machine Check (CMC) Firmware-First mode |
| * with a kernel command line parameter "acpi=nocmcoff". But we don't |
| * have this IA-32 specific feature on ARM64, this definition is only |
| * for compatibility. |
| */ |
| #define acpi_disable_cmcff 1 |
| static inline pgprot_t arch_apei_get_mem_attribute(phys_addr_t addr) |
| { |
| return __acpi_get_mem_attribute(addr); |
| } |
| #endif /* CONFIG_ACPI_APEI */ |
| |
| #ifdef CONFIG_ACPI_NUMA |
| int arm64_acpi_numa_init(void); |
| int acpi_numa_get_nid(unsigned int cpu); |
| void acpi_map_cpus_to_nodes(void); |
| #else |
| static inline int arm64_acpi_numa_init(void) { return -ENOSYS; } |
| static inline int acpi_numa_get_nid(unsigned int cpu) { return NUMA_NO_NODE; } |
| static inline void acpi_map_cpus_to_nodes(void) { } |
| #endif /* CONFIG_ACPI_NUMA */ |
| |
| #define ACPI_TABLE_UPGRADE_MAX_PHYS MEMBLOCK_ALLOC_ACCESSIBLE |
| |
| #endif /*_ASM_ACPI_H*/ |