blob: 2b266ea43716471e7761689c52799817778ed554 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only
%YAML 1.2
---
$id: http://devicetree.org/schemas/regulator/maxim,max8997.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Maxim MAX8997 Power Management IC
maintainers:
- Krzysztof Kozlowski <krzk@kernel.org>
description: |
The Maxim MAX8997 is a Power Management IC which includes voltage and current
regulators, charger controller with fuel gauge, RTC, clock outputs, haptic
motor driver, flash LED driver and Micro-USB Interface Controller.
The binding here is not complete and describes only regulator and charger
controller parts.
properties:
compatible:
const: maxim,max8997-pmic
charger-supply:
description: |
Regulator node for charging current.
interrupts:
items:
- description: irq1 interrupt
- description: alert interrupt
max8997,pmic-buck1-dvs-voltage:
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 8
description: |
A set of 8 voltage values in micro-volt (uV) units for buck1 when
changing voltage using GPIO DVS.
If none of max8997,pmic-buck[1/2/5]-uses-gpio-dvs optional property is
specified, the max8997,pmic-buck[1/2/5]-dvs-voltage property should
specify at least one voltage level (which would be a safe operating
voltage).
max8997,pmic-buck2-dvs-voltage:
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 8
description: |
A set of 8 voltage values in micro-volt (uV) units for buck2 when
changing voltage using GPIO DVS.
If none of max8997,pmic-buck[1/2/5]-uses-gpio-dvs optional property is
specified, the max8997,pmic-buck[1/2/5]-dvs-voltage property should
specify at least one voltage level (which would be a safe operating
voltage).
max8997,pmic-buck5-dvs-voltage:
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 8
description: |
A set of 8 voltage values in micro-volt (uV) units for buck5 when
changing voltage using GPIO DVS.
If none of max8997,pmic-buck[1/2/5]-uses-gpio-dvs optional property is
specified, the max8997,pmic-buck[1/2/5]-dvs-voltage property should
specify at least one voltage level (which would be a safe operating
voltage).
max8997,pmic-buck1-uses-gpio-dvs:
type: boolean
description: |
buck1 can be controlled by GPIO DVS.
max8997,pmic-buck2-uses-gpio-dvs:
type: boolean
description: |
buck2 can be controlled by GPIO DVS.
max8997,pmic-buck5-uses-gpio-dvs:
type: boolean
description: |
buck5 can be controlled by GPIO DVS.
max8997,pmic-buck125-default-dvs-idx:
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 7
default: 0
description: |
Default voltage setting selected from the possible 8 options selectable
by the dvs gpios. The value of this property should be between 0 and 7.
If not specified or if out of range, the default value of this property
is set to 0.
max8997,pmic-buck125-dvs-gpios:
minItems: 3
maxItems: 3
description: |
GPIO specifiers for three host gpio's used for DVS.
max8997,pmic-ignore-gpiodvs-side-effect:
type: boolean
description: |
When GPIO-DVS mode is used for multiple bucks, changing the voltage value
of one of the bucks may affect that of another buck, which is the side
effect of the change (set_voltage). Use this property to ignore such
side effects and change the voltage.
reg:
maxItems: 1
regulators:
type: object
additionalProperties: false
description:
List of child nodes that specify the regulators.
patternProperties:
# 1-18 and 21 LDOs
"^LDO([1-9]|1[0-8]|21)$":
type: object
$ref: regulator.yaml#
description:
Properties for single LDO regulator.
properties:
regulator-name: true
required:
- regulator-name
unevaluatedProperties: false
# 7 bucks
"^BUCK[1-7]$":
type: object
$ref: regulator.yaml#
description:
Properties for single BUCK regulator.
properties:
regulator-name: true
required:
- regulator-name
unevaluatedProperties: false
"^EN32KHZ_[AC]P$":
type: object
$ref: regulator.yaml#
description:
32768 Hz clock output (modelled as regulator)
properties:
regulator-name: true
regulator-always-on: true
regulator-boot-on: true
required:
- regulator-name
additionalProperties: false
properties:
CHARGER:
type: object
$ref: regulator.yaml#
description: main battery charger current control
properties:
regulator-name: true
required:
- regulator-name
unevaluatedProperties: false
CHARGER_CV:
type: object
$ref: regulator.yaml#
description: main battery charger voltage control
properties:
regulator-name: true
required:
- regulator-name
unevaluatedProperties: false
CHARGER_TOPOFF:
type: object
$ref: regulator.yaml#
description: end of charge current threshold level
properties:
regulator-name: true
required:
- regulator-name
unevaluatedProperties: false
ENVICHG:
type: object
$ref: regulator.yaml#
description: |
Battery Charging Current Monitor Output. This is a fixed voltage type
regulator
properties:
regulator-name: true
required:
- regulator-name
unevaluatedProperties: false
ESAFEOUT1:
type: object
$ref: regulator.yaml#
description: LDO19
properties:
regulator-name: true
required:
- regulator-name
unevaluatedProperties: false
ESAFEOUT2:
type: object
$ref: regulator.yaml#
description: LDO20
properties:
regulator-name: true
required:
- regulator-name
unevaluatedProperties: false
required:
- compatible
- max8997,pmic-buck1-dvs-voltage
- max8997,pmic-buck2-dvs-voltage
- max8997,pmic-buck5-dvs-voltage
- reg
- regulators
dependencies:
max8997,pmic-buck1-uses-gpio-dvs: [ 'max8997,pmic-buck125-dvs-gpios' ]
max8997,pmic-buck2-uses-gpio-dvs: [ 'max8997,pmic-buck125-dvs-gpios' ]
max8997,pmic-buck5-uses-gpio-dvs: [ 'max8997,pmic-buck125-dvs-gpios' ]
additionalProperties: false
if:
anyOf:
- required:
- max8997,pmic-buck1-uses-gpio-dvs
- required:
- max8997,pmic-buck2-uses-gpio-dvs
- required:
- max8997,pmic-buck5-uses-gpio-dvs
then:
properties:
max8997,pmic-buck1-dvs-voltage:
minItems: 8
maxItems: 8
max8997,pmic-buck2-dvs-voltage:
minItems: 8
maxItems: 8
max8997,pmic-buck5-dvs-voltage:
minItems: 8
maxItems: 8
examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
pmic@66 {
compatible = "maxim,max8997-pmic";
reg = <0x66>;
interrupts-extended = <&gpx0 7 IRQ_TYPE_LEVEL_LOW>,
<&gpx2 3 IRQ_TYPE_EDGE_FALLING>;
max8997,pmic-buck1-uses-gpio-dvs;
max8997,pmic-buck2-uses-gpio-dvs;
max8997,pmic-buck5-uses-gpio-dvs;
max8997,pmic-ignore-gpiodvs-side-effect;
max8997,pmic-buck125-default-dvs-idx = <0>;
max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
<&gpx0 6 GPIO_ACTIVE_HIGH>,
<&gpl0 0 GPIO_ACTIVE_HIGH>;
max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
<1250000>, <1200000>,
<1150000>, <1100000>,
<1000000>, <950000>;
max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
<950000>, <900000>,
<1100000>, <1000000>,
<950000>, <900000>;
max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
<1200000>, <1200000>,
<1200000>, <1200000>,
<1200000>, <1200000>;
pinctrl-0 = <&max8997_irq>, <&otg_gp>, <&usb_sel>;
pinctrl-names = "default";
charger-supply = <&charger_reg>;
regulators {
LDO1 {
regulator-name = "VADC_3.3V_C210";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
LDO2 {
regulator-name = "VALIVE_1.1V_C210";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
BUCK1 {
regulator-name = "VARM_1.2V_C210";
regulator-min-microvolt = <65000>;
regulator-max-microvolt = <2225000>;
regulator-always-on;
};
// ...
BUCK7 {
regulator-name = "VCC_SUB_2.0V";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
regulator-always-on;
};
ESAFEOUT1 {
regulator-name = "SAFEOUT1";
};
ESAFEOUT2 {
regulator-name = "SAFEOUT2";
regulator-boot-on;
};
EN32KHZ_AP {
regulator-name = "EN32KHZ_AP";
regulator-always-on;
};
EN32KHZ_CP {
regulator-name = "EN32KHZ_CP";
regulator-always-on;
};
CHARGER {
regulator-name = "CHARGER";
regulator-min-microamp = <200000>;
regulator-max-microamp = <950000>;
};
CHARGER_CV {
regulator-name = "CHARGER_CV";
regulator-min-microvolt = <4200000>;
regulator-max-microvolt = <4200000>;
regulator-always-on;
};
CHARGER_TOPOFF {
regulator-name = "CHARGER_TOPOFF";
regulator-min-microamp = <200000>;
regulator-max-microamp = <200000>;
regulator-always-on;
};
};
};
};
- |
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
pmic@66 {
compatible = "maxim,max8997-pmic";
reg = <0x66>;
interrupt-parent = <&gpx0>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>,
<3 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&max8997_irq>;
max8997,pmic-buck1-dvs-voltage = <1350000>;
max8997,pmic-buck2-dvs-voltage = <1100000>;
max8997,pmic-buck5-dvs-voltage = <1200000>;
regulators {
LDO1 {
regulator-name = "VDD_ABB_3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
// ...
BUCK1 {
regulator-name = "VDD_ARM_1.2V";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
// ...
EN32KHZ_AP {
regulator-name = "EN32KHZ_AP";
regulator-always-on;
};
};
};
};