blob: 4a8a221bc9027af18220b3d0124dd818e3a1d304 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/regulator/richtek,rt4801-regulator.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Richtek RT4801 Display Bias regulators
maintainers:
- ChiYuan Huang <cy_huang@richtek.com>
description: |
Regulator nodes should be named to DSVP and DSVN. The
definition for each of these nodes is defined using the standard
binding for regulators at
Documentation/devicetree/bindings/regulator/regulator.txt.
Datasheet is available at
https://www.richtek.com/assets/product_file/RT4801H/DS4801H-00.pdf
properties:
compatible:
enum:
- richtek,rt4801
reg:
maxItems: 1
enable-gpios:
description: GPIOs to use to enable DSVP/DSVN regulator.
The first one is ENP to enable DSVP, and second one is ENM to enable DSVN.
Number of GPIO in the array list could be 1 or 2.
If only one gpio is specified, only one gpio used to control ENP/ENM.
Else if both are specified, DSVP/DSVN could be controlled individually.
If this property not specified, treat both as always-on regulators.
Property is deprecated. Use enable-gpios in each regulator.
minItems: 1
maxItems: 2
deprecated: true
patternProperties:
"^DSV(P|N)$":
type: object
$ref: regulator.yaml#
unevaluatedProperties: false
description:
Properties for single display bias regulator.
properties:
enable-gpios:
description:
GPIO to use to enable DSVP/DSVN regulator. One GPIO can be configured
for controlling both regulators. If this property not specified for
any regulator, treat both as always-on regulators.
maxItems: 1
required:
- compatible
- reg
additionalProperties: false
examples:
- |
i2c {
#address-cells = <1>;
#size-cells = <0>;
rt4801@73 {
compatible = "richtek,rt4801";
reg = <0x73>;
dsvp: DSVP {
regulator-name = "rt4801,dsvp";
regulator-min-microvolt = <4000000>;
regulator-max-microvolt = <6000000>;
regulator-boot-on;
enable-gpios = <&gpio26 2 0>;
};
dsvn: DSVN {
regulator-name = "rt4801,dsvn";
regulator-min-microvolt = <4000000>;
regulator-max-microvolt = <6000000>;
regulator-boot-on;
enable-gpios = <&gpio26 3 0>;
};
};
};