| # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/remoteproc/qcom,wcnss-pil.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Qualcomm WCNSS Peripheral Image Loader |
| |
| maintainers: |
| - Bjorn Andersson <andersson@kernel.org> |
| |
| description: |
| This document defines the binding for a component that loads and boots |
| firmware on the Qualcomm WCNSS core. |
| |
| properties: |
| compatible: |
| description: |
| Append "qcom,pronto" if the device is actually pronto, and not riva |
| oneOf: |
| - items: |
| - enum: |
| - qcom,pronto-v1-pil |
| - qcom,pronto-v2-pil |
| - qcom,pronto-v3-pil |
| - const: qcom,pronto |
| - const: qcom,riva-pil |
| |
| reg: |
| maxItems: 3 |
| description: |
| The base address and size of the CCU, DXE and PMU register blocks |
| |
| reg-names: |
| items: |
| - const: ccu |
| - const: dxe |
| - const: pmu |
| |
| interrupts: |
| minItems: 2 |
| maxItems: 5 |
| |
| interrupt-names: |
| minItems: 2 |
| items: |
| - const: wdog |
| - const: fatal |
| - const: ready |
| - const: handover |
| - const: stop-ack |
| |
| firmware-name: |
| maxItems: 1 |
| description: |
| Relative firmware image path for the WCNSS core. Defaults to |
| "wcnss.mdt". |
| |
| vddpx-supply: |
| description: |
| PX regulator to be held on behalf of the booting of the WCNSS core |
| |
| vddmx-supply: |
| description: |
| MX regulator to be held on behalf of the booting of the WCNSS core. |
| |
| vddcx-supply: |
| description: |
| CX regulator to be held on behalf of the booting of the WCNSS core. |
| |
| power-domains: |
| maxItems: 2 |
| |
| power-domain-names: |
| items: |
| - const: cx |
| - const: mx |
| |
| qcom,smem-states: |
| $ref: /schemas/types.yaml#/definitions/phandle-array |
| description: |
| States used by the AP to signal the WCNSS core that it should shutdown |
| items: |
| - description: Stop the modem |
| |
| qcom,smem-state-names: |
| description: The names of the state bits used for SMP2P output |
| items: |
| - const: stop |
| |
| memory-region: |
| maxItems: 1 |
| description: reserved-memory for the WCNSS core |
| |
| smd-edge: |
| $ref: /schemas/remoteproc/qcom,smd-edge.yaml# |
| description: |
| Qualcomm Shared Memory subnode which represents communication edge, |
| channels and devices related to the ADSP. |
| |
| iris: |
| type: object |
| description: |
| The iris subnode of the WCNSS PIL is used to describe the attached RF module |
| and its resource dependencies. |
| |
| properties: |
| compatible: |
| enum: |
| - qcom,wcn3620 |
| - qcom,wcn3660 |
| - qcom,wcn3660b |
| - qcom,wcn3680 |
| |
| clocks: |
| minItems: 1 |
| items: |
| - description: XO clock |
| - description: RF clock |
| |
| clock-names: |
| minItems: 1 |
| items: |
| - const: xo |
| - const: rf |
| |
| vddxo-supply: |
| description: |
| Reference to the regulator to be held on behalf of the booting WCNSS |
| core |
| |
| vddrfa-supply: |
| description: |
| Reference to the regulator to be held on behalf of the booting WCNSS |
| core |
| |
| vddpa-supply: |
| description: |
| Reference to the regulator to be held on behalf of the booting WCNSS |
| core |
| |
| vdddig-supply: |
| description: |
| Reference to the regulator to be held on behalf of the booting WCNSS |
| core |
| |
| required: |
| - compatible |
| - clocks |
| - clock-names |
| - vddxo-supply |
| - vddrfa-supply |
| - vddpa-supply |
| - vdddig-supply |
| |
| additionalProperties: false |
| |
| required: |
| - compatible |
| - reg |
| - reg-names |
| - interrupts |
| - interrupt-names |
| - iris |
| - vddpx-supply |
| - memory-region |
| - smd-edge |
| |
| additionalProperties: false |
| |
| allOf: |
| - if: |
| properties: |
| compatible: |
| contains: |
| const: qcom,riva-pil |
| then: |
| required: |
| - vddcx-supply |
| - vddmx-supply |
| |
| - if: |
| properties: |
| compatible: |
| contains: |
| enum: |
| - qcom,pronto-v1-pil |
| - qcom,pronto-v2-pil |
| then: |
| properties: |
| vddmx-supply: |
| deprecated: true |
| description: Deprecated for qcom,pronto-v1/2-pil |
| |
| vddcx-supply: |
| deprecated: true |
| description: Deprecated for qcom,pronto-v1/2-pil |
| |
| oneOf: |
| - required: |
| - power-domains |
| - power-domain-names |
| - required: |
| - vddmx-supply |
| - vddcx-supply |
| |
| - if: |
| properties: |
| compatible: |
| contains: |
| enum: |
| - qcom,pronto-v3-pil |
| then: |
| properties: |
| vddmx-supply: false |
| vddcx-supply: false |
| |
| required: |
| - power-domains |
| - power-domain-names |
| |
| examples: |
| - | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/clock/qcom,rpmcc.h> |
| #include <dt-bindings/power/qcom-rpmpd.h> |
| pronto@a21b000 { |
| compatible = "qcom,pronto-v2-pil", "qcom,pronto"; |
| reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>; |
| reg-names = "ccu", "dxe", "pmu"; |
| |
| interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, |
| <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, |
| <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, |
| <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, |
| <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; |
| |
| power-domains = <&rpmpd MSM8916_VDDCX>, <&rpmpd MSM8916_VDDMX>; |
| power-domain-names = "cx", "mx"; |
| |
| vddpx-supply = <&pm8916_l7>; |
| |
| qcom,smem-states = <&wcnss_smp2p_out 0>; |
| qcom,smem-state-names = "stop"; |
| |
| memory-region = <&wcnss_region>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&wcnss_pin_a>; |
| |
| iris { |
| compatible = "qcom,wcn3620"; |
| vddxo-supply = <&pm8916_l7>; |
| vddrfa-supply = <&pm8916_s3>; |
| vddpa-supply = <&pm8916_l9>; |
| vdddig-supply = <&pm8916_l5>; |
| |
| clocks = <&rpmcc RPM_SMD_RF_CLK2>; |
| clock-names = "xo"; |
| }; |
| |
| smd-edge { |
| interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; |
| |
| qcom,ipc = <&apcs 8 17>; |
| qcom,smd-edge = <6>; |
| qcom,remote-pid = <4>; |
| |
| label = "pronto"; |
| |
| wcnss_ctrl: wcnss { |
| compatible = "qcom,wcnss"; |
| qcom,smd-channels = "WCNSS_CTRL"; |
| |
| qcom,mmio = <&pronto>; |
| |
| bluetooth { |
| compatible = "qcom,wcnss-bt"; |
| }; |
| |
| wifi { |
| compatible = "qcom,wcnss-wlan"; |
| |
| interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "tx", "rx"; |
| |
| qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; |
| qcom,smem-state-names = "tx-enable", "tx-rings-empty"; |
| }; |
| }; |
| }; |
| }; |
