blob: 00f87a558c7dd3b8af7392f87448ac8a00fbcd95 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/usb/dwc3-xilinx.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xilinx SuperSpeed DWC3 USB SoC controller
maintainers:
- Mubin Sayyed <mubin.sayyed@amd.com>
- Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
properties:
compatible:
items:
- enum:
- xlnx,zynqmp-dwc3
- xlnx,versal-dwc3
reg:
maxItems: 1
"#address-cells":
enum: [ 1, 2 ]
"#size-cells":
enum: [ 1, 2 ]
ranges: true
power-domains:
description: specifies a phandle to PM domain provider node
maxItems: 1
clocks:
description:
A list of phandle and clock-specifier pairs for the clocks
listed in clock-names.
items:
- description: Master/Core clock, has to be >= 125 MHz
for SS operation and >= 60MHz for HS operation.
- description: Clock source to core during PHY power down.
clock-names:
items:
- const: bus_clk
- const: ref_clk
resets:
description:
A list of phandles for resets listed in reset-names.
items:
- description: USB core reset
- description: USB hibernation reset
- description: USB APB reset
reset-names:
items:
- const: usb_crst
- const: usb_hibrst
- const: usb_apbrst
phys:
minItems: 1
maxItems: 2
phy-names:
minItems: 1
maxItems: 2
items:
enum:
- usb2-phy
- usb3-phy
reset-gpios:
description: GPIO used for the reset ulpi-phy
maxItems: 1
# Required child node:
patternProperties:
"^usb@[0-9a-f]+$":
$ref: snps,dwc3.yaml#
required:
- compatible
- reg
- "#address-cells"
- "#size-cells"
- ranges
- power-domains
- clocks
- clock-names
- resets
- reset-names
additionalProperties: false
examples:
- |
#include <dt-bindings/dma/xlnx-zynqmp-dpdma.h>
#include <dt-bindings/power/xlnx-zynqmp-power.h>
#include <dt-bindings/reset/xlnx-zynqmp-resets.h>
#include <dt-bindings/clock/xlnx-zynqmp-clk.h>
#include <dt-bindings/reset/xlnx-zynqmp-resets.h>
#include <dt-bindings/phy/phy.h>
axi {
#address-cells = <2>;
#size-cells = <2>;
usb@0 {
#address-cells = <0x2>;
#size-cells = <0x2>;
compatible = "xlnx,zynqmp-dwc3";
reg = <0x0 0xff9d0000 0x0 0x100>;
clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
clock-names = "bus_clk", "ref_clk";
power-domains = <&zynqmp_firmware PD_USB_0>;
resets = <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>,
<&zynqmp_reset ZYNQMP_RESET_USB1_HIBERRESET>,
<&zynqmp_reset ZYNQMP_RESET_USB1_APB>;
reset-names = "usb_crst", "usb_hibrst", "usb_apbrst";
phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
phy-names = "usb3-phy";
ranges;
usb@fe200000 {
compatible = "snps,dwc3";
reg = <0x0 0xfe200000 0x0 0x40000>;
interrupt-names = "host", "otg";
interrupts = <0 65 4>, <0 69 4>;
dr_mode = "host";
dma-coherent;
};
};
};