| // SPDX-License-Identifier: GPL-2.0 |
| // Copyright (c) 2020 Fii USA Inc. |
| |
| /dts-v1/; |
| #include "nuvoton-npcm730.dtsi" |
| |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| model = "Fii Kudo Board"; |
| compatible = "fii,kudo", "nuvoton,npcm730"; |
| |
| aliases { |
| ethernet1 = &gmac0; |
| serial0 = &serial0; |
| serial1 = &serial1; |
| serial2 = &serial2; |
| serial3 = &serial3; |
| i2c1 = &i2c1; |
| i2c2 = &i2c2; |
| i2c3 = &i2c3; |
| i2c4 = &i2c4; |
| i2c5 = &i2c5; |
| i2c6 = &i2c6; |
| i2c7 = &i2c7; |
| i2c8 = &i2c8; |
| i2c9 = &i2c9; |
| i2c10 = &i2c10; |
| i2c11 = &i2c11; |
| i2c12 = &i2c12; |
| i2c13 = &i2c13; |
| i2c14 = &i2c14; |
| i2c15 = &i2c15; |
| spi0 = &spi0; |
| spi1 = &spi1; |
| fiu0 = &fiu0; |
| fiu1 = &fiu3; |
| }; |
| |
| chosen { |
| stdout-path = &serial3; |
| }; |
| |
| memory { |
| reg = <0 0x40000000>; |
| }; |
| |
| iio-hwmon { |
| compatible = "iio-hwmon"; |
| io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, |
| <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>; |
| }; |
| |
| jtag_master { |
| compatible = "nuvoton,npcm750-jtag-master"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| // dev/jtag0 |
| dev-num = <0>; |
| // pspi or gpio |
| mode = "pspi"; |
| |
| // pspi2 |
| pspi-controller = <2>; |
| reg = <0xf0201000 0x1000>; |
| interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk NPCM7XX_CLK_APB5>; |
| |
| // TCK, TDI, TDO, TMS |
| jtag-gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>, |
| <&gpio0 18 GPIO_ACTIVE_HIGH>, |
| <&gpio0 17 GPIO_ACTIVE_HIGH>, |
| <&gpio0 16 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| heartbeat { |
| label = "heartbeat"; |
| gpios = <&gpio0 14 1>; |
| }; |
| }; |
| |
| pinctrl: pinctrl@f0800000 { |
| gpio61oh_pins: gpio61oh-pins { |
| pins = "GPO61/nDTR1_BOUT1/STRAP6"; |
| bias-disable; |
| output-high; |
| }; |
| gpio62oh_pins: gpio62oh-pins { |
| pins = "GPO62/nRTST1/STRAP5"; |
| bias-disable; |
| output-high; |
| }; |
| gpio161ol_pins: gpio161ol-pins { |
| pins = "GPIO161/nLFRAME/nESPICS"; |
| bias-disable; |
| output-low; |
| }; |
| gpio163i_pins: gpio163i-pins { |
| pins = "GPIO163/LCLK/ESPICLK"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio167ol_pins: gpio167ol-pins { |
| pins = "GPIO167/LAD3/ESPI_IO3"; |
| bias-disable; |
| output-low; |
| }; |
| gpio95i_pins: gpio95i-pins { |
| pins = "GPIO95/nLRESET/nESPIRST"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio65ol_pins: gpio65ol-pins { |
| pins = "GPIO65/FANIN1"; |
| bias-disable; |
| output-low; |
| }; |
| gpio66oh_pins: gpio66oh-pins { |
| pins = "GPIO66/FANIN2"; |
| bias-disable; |
| output-high; |
| }; |
| gpio67oh_pins: gpio67oh-pins { |
| pins = "GPIO67/FANIN3"; |
| bias-disable; |
| output-high; |
| }; |
| gpio68ol_pins: gpio68ol-pins { |
| pins = "GPIO68/FANIN4"; |
| bias-disable; |
| output-low; |
| }; |
| gpio69i_pins: gpio69i-pins { |
| pins = "GPIO69/FANIN5"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio70ol_pins: gpio70ol-pins { |
| pins = "GPIO70/FANIN6"; |
| bias-disable; |
| output-low; |
| }; |
| gpio71i_pins: gpio71i-pins { |
| pins = "GPIO71/FANIN7"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio72i_pins: gpio72i-pins { |
| pins = "GPIO72/FANIN8"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio73i_pins: gpio73i-pins { |
| pins = "GPIO73/FANIN9"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio74i_pins: gpio74i-pins { |
| pins = "GPIO74/FANIN10"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio75i_pins: gpio75i-pins { |
| pins = "GPIO75/FANIN11"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio76i_pins: gpio76i-pins { |
| pins = "GPIO76/FANIN12"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio77i_pins: gpio77i-pins { |
| pins = "GPIO77/FANIN13"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio78i_pins: gpio78i-pins { |
| pins = "GPIO78/FANIN14"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio79ol_pins: gpio79ol-pins { |
| pins = "GPIO79/FANIN15"; |
| bias-disable; |
| output-low; |
| }; |
| gpio80oh_pins: gpio80oh-pins { |
| pins = "GPIO80/PWM0"; |
| bias-disable; |
| output-high; |
| }; |
| gpio81i_pins: gpio81i-pins { |
| pins = "GPIO81/PWM1"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio82i_pins: gpio82i-pins { |
| pins = "GPIO82/PWM2"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio83i_pins: gpio83i-pins { |
| pins = "GPIO83/PWM3"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio144i_pins: gpio144i-pins { |
| pins = "GPIO144/PWM4"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio145i_pins: gpio145i-pins { |
| pins = "GPIO145/PWM5"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio146i_pins: gpio146i-pins { |
| pins = "GPIO146/PWM6"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio147oh_pins: gpio147oh-pins { |
| pins = "GPIO147/PWM7"; |
| bias-disable; |
| output-high; |
| }; |
| gpio168ol_pins: gpio168ol-pins { |
| pins = "GPIO168/nCLKRUN/nESPIALERT"; |
| bias-disable; |
| output-low; |
| }; |
| gpio169oh_pins: gpio169oh-pins { |
| pins = "GPIO169/nSCIPME"; |
| bias-disable; |
| output-high; |
| }; |
| gpio170ol_pins: gpio170ol-pins { |
| pins = "GPIO170/nSMI"; |
| bias-disable; |
| output-low; |
| }; |
| gpio218oh_pins: gpio218oh-pins { |
| pins = "GPIO218/nWDO1"; |
| bias-disable; |
| output-high; |
| }; |
| gpio37i_pins: gpio37i-pins { |
| pins = "GPIO37/SMB3CSDA"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio38i_pins: gpio38i-pins { |
| pins = "GPIO38/SMB3CSCL"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio39i_pins: gpio39i-pins { |
| pins = "GPIO39/SMB3BSDA"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio40i_pins: gpio40i-pins { |
| pins = "GPIO40/SMB3BSCL"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio121i_pins: gpio121i-pins { |
| pins = "GPIO121/SMB2CSCL"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio122i_pins: gpio122i-pins { |
| pins = "GPIO122/SMB2BSDA"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio123i_pins: gpio123i-pins { |
| pins = "GPIO123/SMB2BSCL"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio124i_pins: gpio124i-pins { |
| pins = "GPIO124/SMB1CSDA"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio125i_pins: gpio125i-pins { |
| pins = "GPIO125/SMB1CSCL"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio126i_pins: gpio126i-pins { |
| pins = "GPIO126/SMB1BSDA"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio127i_pins: gpio127i-pins { |
| pins = "GPIO127/SMB1BSCL"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio136i_pins: gpio136i-pins { |
| pins = "GPIO136/SD1DT0"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio137oh_pins: gpio137oh-pins { |
| pins = "GPIO137/SD1DT1"; |
| bias-disable; |
| output-high; |
| }; |
| gpio138i_pins: gpio138i-pins { |
| pins = "GPIO138/SD1DT2"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio139i_pins: gpio139i-pins { |
| pins = "GPIO139/SD1DT3"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio140i_pins: gpio140i-pins { |
| pins = "GPIO140/SD1CLK"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio141i_pins: gpio141i-pins { |
| pins = "GPIO141/SD1WP"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio190oh_pins: gpio190oh-pins { |
| pins = "GPIO190/nPRD_SMI"; |
| bias-disable; |
| output-high; |
| }; |
| gpio191oh_pins: gpio191oh-pins { |
| pins = "GPIO191"; |
| bias-disable; |
| output-high; |
| }; |
| gpio195ol_pins: gpio195ol-pins { |
| pins = "GPIO195/SMB0BSDA"; |
| bias-disable; |
| output-low; |
| }; |
| gpio196ol_pins: gpio196ol-pins { |
| pins = "GPIO196/SMB0CSCL"; |
| bias-disable; |
| output-low; |
| }; |
| gpio199i_pins: gpio199i-pins { |
| pins = "GPIO199/SMB0DSCL"; |
| bias-disable; |
| input-enable; |
| }; |
| gpio202ol_pins: gpio202ol-pins { |
| pins = "GPIO202/SMB0CSDA"; |
| bias-disable; |
| output-low; |
| }; |
| }; |
| }; |
| |
| &gmac0 { |
| phy-mode = "rgmii-id"; |
| snps,eee-force-disable; |
| status = "okay"; |
| }; |
| |
| &ehci1 { |
| status = "okay"; |
| }; |
| |
| &fiu0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi0cs1_pins>; |
| status = "okay"; |
| flash@0 { |
| compatible = "jedec,spi-nor"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0>; |
| spi-max-frequency = <5000000>; |
| spi-rx-bus-width = <2>; |
| label = "bmc"; |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| u-boot@0 { |
| label = "u-boot"; |
| reg = <0x0000000 0xC0000>; |
| read-only; |
| }; |
| u-boot-env@100000 { |
| label = "u-boot-env"; |
| reg = <0x00100000 0x40000>; |
| }; |
| kernel@200000 { |
| label = "kernel"; |
| reg = <0x0200000 0x600000>; |
| }; |
| rofs@800000 { |
| label = "rofs"; |
| reg = <0x800000 0x3500000>; |
| }; |
| rwfs@3d00000 { |
| label = "rwfs"; |
| reg = <0x3d00000 0x300000>; |
| }; |
| }; |
| }; |
| flash@1 { |
| compatible = "jedec,spi-nor"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <1>; |
| spi-max-frequency = <5000000>; |
| spi-rx-bus-width = <2>; |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| spare1@0 { |
| label = "spi0-cs1-spare1"; |
| reg = <0x0 0x800000>; |
| }; |
| spare2@800000 { |
| label = "spi0-cs1-spare2"; |
| reg = <0x800000 0x0>; |
| }; |
| }; |
| }; |
| }; |
| |
| &fiu3 { |
| pinctrl-0 = <&spi3_pins>; |
| flash@0 { |
| compatible = "jedec,spi-nor"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0>; |
| spi-max-frequency = <5000000>; |
| spi-rx-bus-width = <2>; |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| system1@0 { |
| label = "bios"; |
| reg = <0x0 0x0>; |
| }; |
| system2@800000 { |
| label = "spi3-system2"; |
| reg = <0x800000 0x0>; |
| }; |
| }; |
| }; |
| }; |
| |
| &watchdog1 { |
| status = "okay"; |
| }; |
| |
| &rng { |
| status = "okay"; |
| }; |
| |
| &serial0 { |
| status = "okay"; |
| }; |
| |
| &serial1 { |
| status = "okay"; |
| }; |
| |
| &serial2 { |
| status = "okay"; |
| }; |
| |
| &serial3 { |
| status = "okay"; |
| }; |
| |
| &adc { |
| #io-channel-cells = <1>; |
| status = "okay"; |
| }; |
| |
| &i2c1 { |
| status = "okay"; |
| i2c-mux@75 { |
| compatible = "nxp,pca9548"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x75>; |
| i2c-mux-idle-disconnect; |
| |
| i2c@2 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <2>; |
| |
| // Rear-Fan |
| max31790@58 { |
| compatible = "maxim,max31790"; |
| reg = <0x58>; |
| }; |
| }; |
| |
| i2c@3 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <3>; |
| |
| // Mid-Fan |
| max31790@58 { |
| compatible = "maxim,max31790"; |
| reg = <0x58>; |
| }; |
| }; |
| |
| i2c-bus@4 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <4>; |
| |
| // INLET1_T |
| lm75@5c { |
| compatible = "ti,lm75"; |
| reg = <0x5c>; |
| }; |
| }; |
| |
| i2c-bus@5 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <5>; |
| |
| // OUTLET1_T |
| lm75@5c { |
| compatible = "ti,lm75"; |
| reg = <0x5c>; |
| }; |
| }; |
| |
| i2c-bus@6 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <6>; |
| |
| // OUTLET2_T |
| lm75@5c { |
| compatible = "ti,lm75"; |
| reg = <0x5c>; |
| }; |
| }; |
| |
| i2c-bus@7 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <7>; |
| |
| // OUTLET3_T |
| lm75@5c { |
| compatible = "ti,lm75"; |
| reg = <0x5c>; |
| }; |
| }; |
| }; |
| i2c-mux@77 { |
| compatible = "nxp,pca9548"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x77>; |
| i2c-mux-idle-disconnect; |
| |
| i2c-bus@2 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <2>; |
| |
| // STB-T |
| pmbus@74 { |
| compatible = "pmbus"; |
| reg = <0x74>; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c2 { |
| status = "okay"; |
| smpro@4f { |
| compatible = "ampere,smpro"; |
| reg = <0x4f>; |
| }; |
| |
| smpro@4e { |
| compatible = "ampere,smpro"; |
| reg = <0x4e>; |
| }; |
| }; |
| |
| &i2c3 { |
| status = "okay"; |
| }; |
| |
| &i2c4 { |
| status = "okay"; |
| i2c-mux@77 { |
| compatible = "nxp,pca9548"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x77>; |
| i2c-mux-idle-disconnect; |
| |
| i2c-bus@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| |
| // ADC sensors |
| adm1266@40 { |
| compatible = "adi,adm1266"; |
| reg = <0x40>; |
| }; |
| }; |
| |
| i2c-bus@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| // ADC sensors |
| adm1266@41 { |
| compatible = "adi,adm1266"; |
| reg = <0x41>; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c5 { |
| status = "okay"; |
| }; |
| |
| &i2c6 { |
| status = "okay"; |
| }; |
| |
| &i2c7 { |
| status = "okay"; |
| }; |
| |
| &i2c8 { |
| status = "okay"; |
| }; |
| |
| &i2c9 { |
| status = "okay"; |
| }; |
| |
| &i2c10 { |
| status = "okay"; |
| }; |
| |
| &i2c11 { |
| status = "okay"; |
| }; |
| |
| &i2c12 { |
| status = "okay"; |
| ssif-bmc@10 { |
| compatible = "ssif-bmc"; |
| reg = <0x10>; |
| }; |
| }; |
| |
| &i2c13 { |
| status = "okay"; |
| i2c-mux@77 { |
| compatible = "nxp,pca9548"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x77>; |
| i2c-mux-idle-disconnect; |
| |
| i2c-bus@3 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <3>; |
| |
| // M2_ZONE_T |
| lm75@28 { |
| compatible = "ti,lm75"; |
| reg = <0x28>; |
| }; |
| }; |
| |
| i2c-bus@4 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <4>; |
| |
| // BATT_ZONE_T |
| lm75@29 { |
| compatible = "ti,lm75"; |
| reg = <0x29>; |
| }; |
| }; |
| |
| i2c-bus@5 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <5>; |
| |
| // NBM1_ZONE_T |
| lm75@28 { |
| compatible = "ti,lm75"; |
| reg = <0x28>; |
| }; |
| }; |
| i2c-bus@6 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <6>; |
| |
| // NBM2_ZONE_T |
| lm75@29 { |
| compatible = "ti,lm75"; |
| reg = <0x29>; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c14 { |
| status = "okay"; |
| }; |
| |
| &i2c15 { |
| status = "okay"; |
| }; |
| |
| &spi0 { |
| cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| }; |
| |
| &pinctrl { |
| pinctrl-names = "default"; |
| pinctrl-0 = < |
| &gpio61oh_pins |
| &gpio62oh_pins |
| &gpio161ol_pins |
| &gpio163i_pins |
| &gpio167ol_pins |
| &gpio95i_pins |
| &gpio65ol_pins |
| &gpio66oh_pins |
| &gpio67oh_pins |
| &gpio68ol_pins |
| &gpio69i_pins |
| &gpio70ol_pins |
| &gpio71i_pins |
| &gpio72i_pins |
| &gpio73i_pins |
| &gpio74i_pins |
| &gpio75i_pins |
| &gpio76i_pins |
| &gpio77i_pins |
| &gpio78i_pins |
| &gpio79ol_pins |
| &gpio80oh_pins |
| &gpio81i_pins |
| &gpio82i_pins |
| &gpio83i_pins |
| &gpio144i_pins |
| &gpio145i_pins |
| &gpio146i_pins |
| &gpio147oh_pins |
| &gpio168ol_pins |
| &gpio169oh_pins |
| &gpio170ol_pins |
| &gpio218oh_pins |
| &gpio37i_pins |
| &gpio38i_pins |
| &gpio39i_pins |
| &gpio40i_pins |
| &gpio121i_pins |
| &gpio122i_pins |
| &gpio123i_pins |
| &gpio124i_pins |
| &gpio125i_pins |
| &gpio126i_pins |
| &gpio127i_pins |
| &gpio136i_pins |
| &gpio137oh_pins |
| &gpio138i_pins |
| &gpio139i_pins |
| &gpio140i_pins |
| &gpio141i_pins |
| &gpio190oh_pins |
| &gpio191oh_pins |
| &gpio195ol_pins |
| &gpio196ol_pins |
| &gpio199i_pins |
| &gpio202ol_pins |
| >; |
| }; |
| |
| &gcr { |
| serial_port_mux: mux-controller { |
| compatible = "mmio-mux"; |
| #mux-control-cells = <1>; |
| |
| mux-reg-masks = <0x38 0x07>; |
| idle-states = <2>; |
| }; |
| }; |
