blob: b547216d48014448028a4e337eb8233a32be7dbe [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for the RZ/A1H RSK board
*
* Copyright (C) 2016 Renesas Electronics
*/
/dts-v1/;
#include "r7s72100.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
/ {
model = "RSKRZA1";
compatible = "renesas,rskrza1", "renesas,r7s72100";
aliases {
serial0 = &scif2;
};
chosen {
bootargs = "ignore_loglevel";
stdout-path = "serial0:115200n8";
};
memory@8000000 {
device_type = "memory";
reg = <0x08000000 0x02000000>;
};
flash@18000000 {
compatible = "mtd-rom";
reg = <0x18000000 0x08000000>;
clocks = <&mstp9_clks R7S72100_CLK_SPIBSC0>;
power-domains = <&cpg_clocks>;
bank-width = <4>;
device-width = <1>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000000 0x00080000>;
};
partition@80000 {
label = "uboot-env";
reg = <0x00080000 0x00040000>;
};
partition@c0000 {
label = "dt";
reg = <0x000c0000 0x00040000>;
};
partition@100000 {
label = "kernel";
reg = <0x00100000 0x00280000>;
};
partition@400000 {
label = "rootfs";
reg = <0x00400000 0x01c00000>;
};
};
};
keyboard {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&keyboard_pins>;
key-1 {
interrupt-parent = <&irqc>;
interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
linux,code = <KEY_1>;
label = "SW1";
wakeup-source;
};
key-2 {
interrupt-parent = <&irqc>;
interrupts = <2 IRQ_TYPE_EDGE_BOTH>;
linux,code = <KEY_2>;
label = "SW2";
wakeup-source;
};
key-3 {
interrupt-parent = <&irqc>;
interrupts = <5 IRQ_TYPE_EDGE_BOTH>;
linux,code = <KEY_3>;
label = "SW3";
wakeup-source;
};
};
leds {
compatible = "gpio-leds";
led0 {
gpios = <&port7 1 GPIO_ACTIVE_LOW>;
};
led1 {
gpios = <&io_expander1 0 GPIO_ACTIVE_LOW>;
};
led2 {
gpios = <&io_expander1 1 GPIO_ACTIVE_LOW>;
};
led3 {
gpios = <&io_expander1 2 GPIO_ACTIVE_LOW>;
};
};
};
&extal_clk {
clock-frequency = <13330000>;
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
status = "okay";
clock-frequency = <400000>;
io_expander1: gpio@20 {
compatible = "onnn,cat9554";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
};
io_expander2: gpio@21 {
compatible = "onnn,cat9554";
reg = <0x21>;
gpio-controller;
#gpio-cells = <2>;
};
eeprom@50 {
compatible = "renesas,r1ex24016", "atmel,24c16";
reg = <0x50>;
pagesize = <16>;
};
};
&bsc {
flash@0 {
compatible = "cfi-flash";
reg = <0x00000000 0x4000000>;
bank-width = <2>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "apps";
reg = <0x00000000 0x01000000>;
};
partition@1000000 {
label = "data";
reg = <0x01000000 0x03000000>;
};
};
};
};
&usb_x1_clk {
clock-frequency = <48000000>;
};
&rtc_x1_clk {
clock-frequency = <32768>;
};
&pinctrl {
/* RIIC ch3 (Port Expander, EEPROM (MAC Addr), Audio Codec) */
i2c3_pins: i2c3 {
pinmux = <RZA1_PINMUX(1, 6, 1)>, /* RIIC3SCL */
<RZA1_PINMUX(1, 7, 1)>; /* RIIC3SDA */
};
keyboard_pins: keyboard {
pinmux = <RZA1_PINMUX(1, 9, 3)>, /* IRQ3 */
<RZA1_PINMUX(1, 8, 3)>, /* IRQ2 */
<RZA1_PINMUX(1, 11, 3)>; /* IRQ5 */
};
/* Serial Console */
scif2_pins: serial2 {
pinmux = <RZA1_PINMUX(3, 0, 6)>, /* TxD2 */
<RZA1_PINMUX(3, 2, 4)>; /* RxD2 */
};
/* Ethernet */
ether_pins: ether {
/* Ethernet on Ports 1,2,3,5 */
pinmux = <RZA1_PINMUX(1, 14, 4)>, /* ET_COL */
<RZA1_PINMUX(5, 9, 2)>, /* ET_MDC */
<RZA1_PINMUX(3, 3, 2)>, /* ET_MDIO */
<RZA1_PINMUX(3, 4, 2)>, /* ET_RXCLK */
<RZA1_PINMUX(3, 5, 2)>, /* ET_RXER */
<RZA1_PINMUX(3, 6, 2)>, /* ET_RXDV */
<RZA1_PINMUX(2, 0, 2)>, /* ET_TXCLK */
<RZA1_PINMUX(2, 1, 2)>, /* ET_TXER */
<RZA1_PINMUX(2, 2, 2)>, /* ET_TXEN */
<RZA1_PINMUX(2, 3, 2)>, /* ET_CRS */
<RZA1_PINMUX(2, 4, 2)>, /* ET_TXD0 */
<RZA1_PINMUX(2, 5, 2)>, /* ET_TXD1 */
<RZA1_PINMUX(2, 6, 2)>, /* ET_TXD2 */
<RZA1_PINMUX(2, 7, 2)>, /* ET_TXD3 */
<RZA1_PINMUX(2, 8, 2)>, /* ET_RXD0 */
<RZA1_PINMUX(2, 9, 2)>, /* ET_RXD1 */
<RZA1_PINMUX(2, 10, 2)>, /* ET_RXD2 */
<RZA1_PINMUX(2, 11, 2)>; /* ET_RXD3 */
};
/* SDHI ch1 on CN1 */
sdhi1_pins: sdhi1 {
pinmux = <RZA1_PINMUX(3, 8, 7)>, /* SD_CD_1 */
<RZA1_PINMUX(3, 9, 7)>, /* SD_WP_1 */
<RZA1_PINMUX(3, 10, 7)>, /* SD_D1_1 */
<RZA1_PINMUX(3, 11, 7)>, /* SD_D0_1 */
<RZA1_PINMUX(3, 12, 7)>, /* SD_CLK_1 */
<RZA1_PINMUX(3, 13, 7)>, /* SD_CMD_1 */
<RZA1_PINMUX(3, 14, 7)>, /* SD_D3_1 */
<RZA1_PINMUX(3, 15, 7)>; /* SD_D2_1 */
};
};
&mtu2 {
status = "okay";
};
&ether {
pinctrl-names = "default";
pinctrl-0 = <&ether_pins>;
status = "okay";
renesas,no-ether-link;
phy-handle = <&phy0>;
phy0: ethernet-phy@0 {
compatible = "ethernet-phy-idb824.2814",
"ethernet-phy-ieee802.3-c22";
reg = <0>;
};
};
&sdhi1 {
pinctrl-names = "default";
pinctrl-0 = <&sdhi1_pins>;
bus-width = <4>;
status = "okay";
};
&ostm0 {
status = "okay";
};
&ostm1 {
status = "okay";
};
&rtc {
status = "okay";
};
&scif2 {
pinctrl-names = "default";
pinctrl-0 = <&scif2_pins>;
status = "okay";
};