blob: 579312ed53ce1a3654c4163774e719a9c07e6906 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/dts-v1/;
#include "msm8916-samsung-gt5-common.dtsi"
/ {
model = "Samsung Galaxy Tab A 8.0 (2015)";
compatible = "samsung,gt58", "qcom,msm8916";
chassis-type = "tablet";
reg_5p4v: regulator-5p4v {
compatible = "regulator-fixed";
regulator-name = "vlcd_5p4v";
regulator-min-microvolt = <5400000>;
regulator-max-microvolt = <5400000>;
gpio = <&tlmm 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&buckbooster_en_default>;
pinctrl-names = "default";
};
reg_vdd_tsp: regulator-vdd-tsp {
compatible = "regulator-fixed";
regulator-name = "vdd_tsp";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&reg_tsp_en_default>;
pinctrl-names = "default";
};
i2c-amplifier {
compatible = "i2c-gpio";
sda-gpios = <&tlmm 55 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&tlmm 56 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
pinctrl-0 = <&amp_i2c_default>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
speaker_codec: audio-codec@34 {
compatible = "nxp,tfa9895";
reg = <0x34>;
vddd-supply = <&pm8916_l5>;
sound-name-prefix = "Speaker";
#sound-dai-cells = <0>;
};
};
vibrator {
compatible = "gpio-vibrator";
enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&vibrator_en_default>;
pinctrl-names = "default";
};
};
&blsp_i2c5 {
status = "okay";
touchscreen@20 {
compatible = "zinitix,bt532";
reg = <0x20>;
interrupt-parent = <&tlmm>;
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
touchscreen-size-x = <768>;
touchscreen-size-y = <1024>;
vcca-supply = <&reg_vdd_tsp>;
vdd-supply = <&pm8916_l6>;
pinctrl-0 = <&tsp_int_default>;
pinctrl-names = "default";
};
};
&gpu {
status = "okay";
};
&mdss {
status = "okay";
};
&mdss_dsi0 {
pinctrl-0 = <&mdss_default>;
pinctrl-1 = <&mdss_sleep>;
pinctrl-names = "default", "sleep";
panel@0 {
compatible = "samsung,lsl080al03", "samsung,s6d7aa0";
reg = <0>;
power-supply = <&reg_5p4v>;
vmipi-supply = <&pm8916_l5>;
reset-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
port {
panel_in: endpoint {
remote-endpoint = <&mdss_dsi0_out>;
};
};
};
};
&mdss_dsi0_out {
data-lanes = <0 1 2 3>;
remote-endpoint = <&panel_in>;
};
&sound {
model = "samsung-a2015";
pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default &secondary_mic_default>;
pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep &secondary_mic_default>;
pinctrl-names = "default", "sleep";
};
&tlmm {
amp_i2c_default: amp-i2c-default-state {
pins = "gpio55", "gpio56";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
buckbooster_en_default: buckbooster-en-default-state {
pins = "gpio8";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
mdss_default: mdss-default-state {
pins = "gpio97";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
mdss_sleep: mdss-sleep-state {
pins = "gpio97";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
reg_tsp_en_default: reg-tsp-en-default-state {
pins = "gpio73";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
secondary_mic_default: secondary-mic-default-state {
pins = "gpio98";
function = "gpio";
drive-strength = <2>;
bias-disable;
output-high;
};
tsp_int_default: tsp-int-default-state {
pins = "gpio13";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
vibrator_en_default: vibrator-en-default-state {
pins = "gpio76";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
};