| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. |
| * Copyright (c) 2020-2023, Linaro Limited |
| */ |
| |
| #include <dt-bindings/clock/qcom,gcc-msm8939.h> |
| #include <dt-bindings/clock/qcom,rpmcc.h> |
| #include <dt-bindings/interconnect/qcom,msm8939.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/power/qcom-rpmpd.h> |
| #include <dt-bindings/reset/qcom,gcc-msm8939.h> |
| #include <dt-bindings/soc/qcom,apr.h> |
| #include <dt-bindings/thermal/thermal.h> |
| |
| / { |
| interrupt-parent = <&intc>; |
| |
| /* |
| * Stock LK wants address-cells/size-cells = 2 |
| * A number of our drivers want address/size cells = 1 |
| * hence the disparity between top-level and /soc below. |
| */ |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| clocks { |
| xo_board: xo-board { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <19200000>; |
| }; |
| |
| sleep_clk: sleep-clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| }; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| CPU0: cpu@100 { |
| compatible = "arm,cortex-a53"; |
| device_type = "cpu"; |
| enable-method = "spin-table"; |
| reg = <0x100>; |
| next-level-cache = <&L2_1>; |
| qcom,acc = <&acc0>; |
| qcom,saw = <&saw0>; |
| cpu-idle-states = <&CPU_SLEEP_0>; |
| clocks = <&apcs1_mbox>; |
| #cooling-cells = <2>; |
| L2_1: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| }; |
| }; |
| |
| CPU1: cpu@101 { |
| compatible = "arm,cortex-a53"; |
| device_type = "cpu"; |
| enable-method = "spin-table"; |
| reg = <0x101>; |
| next-level-cache = <&L2_1>; |
| qcom,acc = <&acc1>; |
| qcom,saw = <&saw1>; |
| cpu-idle-states = <&CPU_SLEEP_0>; |
| clocks = <&apcs1_mbox>; |
| #cooling-cells = <2>; |
| }; |
| |
| CPU2: cpu@102 { |
| compatible = "arm,cortex-a53"; |
| device_type = "cpu"; |
| enable-method = "spin-table"; |
| reg = <0x102>; |
| next-level-cache = <&L2_1>; |
| qcom,acc = <&acc2>; |
| qcom,saw = <&saw2>; |
| cpu-idle-states = <&CPU_SLEEP_0>; |
| clocks = <&apcs1_mbox>; |
| #cooling-cells = <2>; |
| }; |
| |
| CPU3: cpu@103 { |
| compatible = "arm,cortex-a53"; |
| device_type = "cpu"; |
| enable-method = "spin-table"; |
| reg = <0x103>; |
| next-level-cache = <&L2_1>; |
| qcom,acc = <&acc3>; |
| qcom,saw = <&saw3>; |
| cpu-idle-states = <&CPU_SLEEP_0>; |
| clocks = <&apcs1_mbox>; |
| #cooling-cells = <2>; |
| }; |
| |
| CPU4: cpu@0 { |
| compatible = "arm,cortex-a53"; |
| device_type = "cpu"; |
| enable-method = "spin-table"; |
| reg = <0x0>; |
| qcom,acc = <&acc4>; |
| qcom,saw = <&saw4>; |
| cpu-idle-states = <&CPU_SLEEP_0>; |
| clocks = <&apcs0_mbox>; |
| #cooling-cells = <2>; |
| next-level-cache = <&L2_0>; |
| L2_0: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| }; |
| }; |
| |
| CPU5: cpu@1 { |
| compatible = "arm,cortex-a53"; |
| device_type = "cpu"; |
| enable-method = "spin-table"; |
| reg = <0x1>; |
| next-level-cache = <&L2_0>; |
| qcom,acc = <&acc5>; |
| qcom,saw = <&saw5>; |
| cpu-idle-states = <&CPU_SLEEP_0>; |
| clocks = <&apcs0_mbox>; |
| #cooling-cells = <2>; |
| }; |
| |
| CPU6: cpu@2 { |
| compatible = "arm,cortex-a53"; |
| device_type = "cpu"; |
| enable-method = "spin-table"; |
| reg = <0x2>; |
| next-level-cache = <&L2_0>; |
| qcom,acc = <&acc6>; |
| qcom,saw = <&saw6>; |
| cpu-idle-states = <&CPU_SLEEP_0>; |
| clocks = <&apcs0_mbox>; |
| #cooling-cells = <2>; |
| }; |
| |
| CPU7: cpu@3 { |
| compatible = "arm,cortex-a53"; |
| device_type = "cpu"; |
| enable-method = "spin-table"; |
| reg = <0x3>; |
| next-level-cache = <&L2_0>; |
| qcom,acc = <&acc7>; |
| qcom,saw = <&saw7>; |
| cpu-idle-states = <&CPU_SLEEP_0>; |
| clocks = <&apcs0_mbox>; |
| #cooling-cells = <2>; |
| }; |
| |
| idle-states { |
| CPU_SLEEP_0: cpu-sleep-0 { |
| compatible = "arm,idle-state"; |
| entry-latency-us = <130>; |
| exit-latency-us = <150>; |
| min-residency-us = <2000>; |
| local-timer-stop; |
| }; |
| }; |
| }; |
| |
| /* |
| * MSM8939 has a big.LITTLE heterogeneous computing architecture, |
| * consisting of two clusters of four ARM Cortex-A53s each. The |
| * LITTLE cluster runs at 1.0-1.2GHz, and the big cluster runs |
| * at 1.5-1.7GHz. |
| * |
| * The enable method used here is spin-table which presupposes use |
| * of a 2nd stage boot shim such as lk2nd to have installed a |
| * spin-table, the downstream non-psci/non-spin-table method that |
| * default msm8916/msm8936/msm8939 will not be supported upstream. |
| */ |
| cpu-map { |
| /* LITTLE (efficiency) cluster */ |
| cluster0 { |
| core0 { |
| cpu = <&CPU4>; |
| }; |
| |
| core1 { |
| cpu = <&CPU5>; |
| }; |
| |
| core2 { |
| cpu = <&CPU6>; |
| }; |
| |
| core3 { |
| cpu = <&CPU7>; |
| }; |
| }; |
| |
| /* big (performance) cluster */ |
| /* Boot CPU is cluster 1 core 0 */ |
| cluster1 { |
| core0 { |
| cpu = <&CPU0>; |
| }; |
| |
| core1 { |
| cpu = <&CPU1>; |
| }; |
| |
| core2 { |
| cpu = <&CPU2>; |
| }; |
| |
| core3 { |
| cpu = <&CPU3>; |
| }; |
| }; |
| }; |
| |
| firmware { |
| scm: scm { |
| compatible = "qcom,scm-msm8916", "qcom,scm"; |
| clocks = <&gcc GCC_CRYPTO_CLK>, |
| <&gcc GCC_CRYPTO_AXI_CLK>, |
| <&gcc GCC_CRYPTO_AHB_CLK>; |
| clock-names = "core", "bus", "iface"; |
| #reset-cells = <1>; |
| |
| qcom,dload-mode = <&tcsr 0x6100>; |
| }; |
| }; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| /* We expect the bootloader to fill in the reg */ |
| reg = <0x0 0x80000000 0x0 0x0>; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a53-pmu"; |
| interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; |
| }; |
| |
| rpm: remoteproc { |
| compatible = "qcom,msm8936-rpm-proc", "qcom,rpm-proc"; |
| |
| smd-edge { |
| interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; |
| qcom,ipc = <&apcs1_mbox 8 0>; |
| qcom,smd-edge = <15>; |
| |
| rpm_requests: rpm-requests { |
| compatible = "qcom,rpm-msm8936"; |
| qcom,smd-channels = "rpm_requests"; |
| |
| rpmcc: clock-controller { |
| compatible = "qcom,rpmcc-msm8936", "qcom,rpmcc"; |
| #clock-cells = <1>; |
| clock-names = "xo"; |
| clocks = <&xo_board>; |
| }; |
| |
| rpmpd: power-controller { |
| compatible = "qcom,msm8939-rpmpd"; |
| #power-domain-cells = <1>; |
| operating-points-v2 = <&rpmpd_opp_table>; |
| |
| rpmpd_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| rpmpd_opp_ret: opp1 { |
| opp-level = <1>; |
| }; |
| |
| rpmpd_opp_svs_krait: opp2 { |
| opp-level = <2>; |
| }; |
| |
| rpmpd_opp_svs_soc: opp3 { |
| opp-level = <3>; |
| }; |
| |
| rpmpd_opp_nom: opp4 { |
| opp-level = <4>; |
| }; |
| |
| rpmpd_opp_turbo: opp5 { |
| opp-level = <5>; |
| }; |
| |
| rpmpd_opp_super_turbo: opp6 { |
| opp-level = <6>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| tz-apps@86000000 { |
| reg = <0x0 0x86000000 0x0 0x300000>; |
| no-map; |
| }; |
| |
| smem@86300000 { |
| compatible = "qcom,smem"; |
| reg = <0x0 0x86300000 0x0 0x100000>; |
| no-map; |
| |
| hwlocks = <&tcsr_mutex 3>; |
| qcom,rpm-msg-ram = <&rpm_msg_ram>; |
| }; |
| |
| hypervisor@86400000 { |
| reg = <0x0 0x86400000 0x0 0x100000>; |
| no-map; |
| }; |
| |
| tz@86500000 { |
| reg = <0x0 0x86500000 0x0 0x180000>; |
| no-map; |
| }; |
| |
| reserved@86680000 { |
| reg = <0x0 0x86680000 0x0 0x80000>; |
| no-map; |
| }; |
| |
| rmtfs@86700000 { |
| compatible = "qcom,rmtfs-mem"; |
| reg = <0x0 0x86700000 0x0 0xe0000>; |
| no-map; |
| |
| qcom,client-id = <1>; |
| }; |
| |
| rfsa@867e0000 { |
| reg = <0x0 0x867e0000 0x0 0x20000>; |
| no-map; |
| }; |
| |
| mpss_mem: mpss@86800000 { |
| /* |
| * The memory region for the mpss firmware is generally |
| * relocatable and could be allocated dynamically. |
| * However, many firmware versions tend to fail when |
| * loaded to some special addresses, so it is hard to |
| * define reliable alloc-ranges. |
| * |
| * alignment = <0x0 0x400000>; |
| * alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; |
| */ |
| reg = <0x0 0x86800000 0x0 0>; /* size is device-specific */ |
| no-map; |
| status = "disabled"; |
| }; |
| |
| wcnss_mem: wcnss { |
| size = <0x0 0x600000>; |
| alignment = <0x0 0x100000>; |
| alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; |
| no-map; |
| status = "disabled"; |
| }; |
| |
| venus_mem: venus { |
| size = <0x0 0x500000>; |
| alignment = <0x0 0x100000>; |
| alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; |
| no-map; |
| status = "disabled"; |
| }; |
| |
| mba_mem: mba { |
| size = <0x0 0x100000>; |
| alignment = <0x0 0x100000>; |
| alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; |
| no-map; |
| status = "disabled"; |
| }; |
| }; |
| |
| smp2p-hexagon { |
| compatible = "qcom,smp2p"; |
| qcom,smem = <435>, <428>; |
| |
| interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; |
| |
| mboxes = <&apcs1_mbox 14>; |
| |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <1>; |
| |
| hexagon_smp2p_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| hexagon_smp2p_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| smp2p-wcnss { |
| compatible = "qcom,smp2p"; |
| qcom,smem = <451>, <431>; |
| |
| interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; |
| |
| mboxes = <&apcs1_mbox 18>; |
| |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <4>; |
| |
| wcnss_smp2p_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| wcnss_smp2p_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| |
| #qcom,smem-state-cells = <1>; |
| }; |
| }; |
| |
| smsm { |
| compatible = "qcom,smsm"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| qcom,ipc-1 = <&apcs1_mbox 8 13>; |
| qcom,ipc-3 = <&apcs1_mbox 8 19>; |
| |
| apps_smsm: apps@0 { |
| reg = <0>; |
| |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| hexagon_smsm: hexagon@1 { |
| reg = <1>; |
| interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| wcnss_smsm: wcnss@6 { |
| reg = <6>; |
| interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| soc: soc@0 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0 0xffffffff>; |
| |
| rng@22000 { |
| compatible = "qcom,prng"; |
| reg = <0x00022000 0x200>; |
| clocks = <&gcc GCC_PRNG_AHB_CLK>; |
| clock-names = "core"; |
| }; |
| |
| qfprom: qfprom@5c000 { |
| compatible = "qcom,msm8916-qfprom", "qcom,qfprom"; |
| reg = <0x0005c000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| tsens_base1: base1@a0 { |
| reg = <0xa0 0x1>; |
| bits = <0 8>; |
| }; |
| |
| tsens_s6_p1: s6-p1@a1 { |
| reg = <0xa1 0x1>; |
| bits = <0 6>; |
| }; |
| |
| tsens_s6_p2: s6-p2@a1 { |
| reg = <0xa1 0x2>; |
| bits = <6 6>; |
| }; |
| |
| tsens_s7_p1: s7-p1@a2 { |
| reg = <0xa2 0x2>; |
| bits = <4 6>; |
| }; |
| |
| tsens_s7_p2: s7-p2@a3 { |
| reg = <0xa3 0x1>; |
| bits = <2 6>; |
| }; |
| |
| tsens_s8_p1: s8-p1@a4 { |
| reg = <0xa4 0x1>; |
| bits = <0 6>; |
| }; |
| |
| tsens_s8_p2: s8-p2@a4 { |
| reg = <0xa4 0x2>; |
| bits = <6 6>; |
| }; |
| |
| tsens_s9_p1: s9-p1@a5 { |
| reg = <0xa5 0x2>; |
| bits = <4 6>; |
| }; |
| |
| tsens_s9_p2: s9-p2@a6 { |
| reg = <0xa6 0x1>; |
| bits = <2 6>; |
| }; |
| |
| tsens_base2: base2@a7 { |
| reg = <0xa7 0x1>; |
| bits = <0 8>; |
| }; |
| |
| tsens_mode: mode@d0 { |
| reg = <0xd0 0x1>; |
| bits = <0 3>; |
| }; |
| |
| tsens_s0_p1: s0-p1@d0 { |
| reg = <0xd0 0x2>; |
| bits = <3 6>; |
| }; |
| |
| tsens_s0_p2: s0-p1@d1 { |
| reg = <0xd1 0x1>; |
| bits = <1 6>; |
| }; |
| |
| tsens_s1_p1: s1-p1@d1 { |
| reg = <0xd1 0x2>; |
| bits = <7 6>; |
| }; |
| |
| tsens_s1_p2: s1-p2@d2 { |
| reg = <0xd2 0x2>; |
| bits = <5 6>; |
| }; |
| |
| tsens_s2_p1: s2-p1@d3 { |
| reg = <0xd3 0x2>; |
| bits = <3 6>; |
| }; |
| |
| tsens_s2_p2: s2-p2@d4 { |
| reg = <0xd4 0x1>; |
| bits = <1 6>; |
| }; |
| |
| tsens_s3_p1: s3-p1@d4 { |
| reg = <0xd4 0x2>; |
| bits = <7 6>; |
| }; |
| |
| tsens_s3_p2: s3-p2@d5 { |
| reg = <0xd5 0x2>; |
| bits = <5 6>; |
| }; |
| |
| tsens_s5_p1: s5-p1@d6 { |
| reg = <0xd6 0x2>; |
| bits = <3 6>; |
| }; |
| |
| tsens_s5_p2: s5-p2@d7 { |
| reg = <0xd7 0x1>; |
| bits = <1 6>; |
| }; |
| }; |
| |
| rpm_msg_ram: sram@60000 { |
| compatible = "qcom,rpm-msg-ram"; |
| reg = <0x00060000 0x8000>; |
| }; |
| |
| bimc: interconnect@400000 { |
| compatible = "qcom,msm8939-bimc"; |
| reg = <0x00400000 0x62000>; |
| #interconnect-cells = <1>; |
| }; |
| |
| tsens: thermal-sensor@4a9000 { |
| compatible = "qcom,msm8939-tsens", "qcom,tsens-v0_1"; |
| reg = <0x004a9000 0x1000>, /* TM */ |
| <0x004a8000 0x1000>; /* SROT */ |
| nvmem-cells = <&tsens_mode>, |
| <&tsens_base1>, <&tsens_base2>, |
| <&tsens_s0_p1>, <&tsens_s0_p2>, |
| <&tsens_s1_p1>, <&tsens_s1_p2>, |
| <&tsens_s2_p1>, <&tsens_s2_p2>, |
| <&tsens_s3_p1>, <&tsens_s3_p2>, |
| <&tsens_s5_p1>, <&tsens_s5_p2>, |
| <&tsens_s6_p1>, <&tsens_s6_p2>, |
| <&tsens_s7_p1>, <&tsens_s7_p2>, |
| <&tsens_s8_p1>, <&tsens_s8_p2>, |
| <&tsens_s9_p1>, <&tsens_s9_p2>; |
| nvmem-cell-names = "mode", |
| "base1", "base2", |
| "s0_p1", "s0_p2", |
| "s1_p1", "s1_p2", |
| "s2_p1", "s2_p2", |
| "s3_p1", "s3_p2", |
| "s5_p1", "s5_p2", |
| "s6_p1", "s6_p2", |
| "s7_p1", "s7_p2", |
| "s8_p1", "s8_p2", |
| "s9_p1", "s9_p2"; |
| #qcom,sensors = <9>; |
| interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "uplow"; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| restart@4ab000 { |
| compatible = "qcom,pshold"; |
| reg = <0x004ab000 0x4>; |
| }; |
| |
| pcnoc: interconnect@500000 { |
| compatible = "qcom,msm8939-pcnoc"; |
| reg = <0x00500000 0x11000>; |
| #interconnect-cells = <1>; |
| }; |
| |
| snoc: interconnect@580000 { |
| compatible = "qcom,msm8939-snoc"; |
| reg = <0x00580000 0x14080>; |
| #interconnect-cells = <1>; |
| |
| snoc_mm: interconnect-snoc { |
| compatible = "qcom,msm8939-snoc-mm"; |
| #interconnect-cells = <1>; |
| }; |
| }; |
| |
| tlmm: pinctrl@1000000 { |
| compatible = "qcom,msm8916-pinctrl"; |
| reg = <0x01000000 0x300000>; |
| interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| gpio-ranges = <&tlmm 0 0 122>; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| |
| blsp_i2c1_default: blsp-i2c1-default-state { |
| pins = "gpio2", "gpio3"; |
| function = "blsp_i2c1"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| blsp_i2c1_sleep: blsp-i2c1-sleep-state { |
| pins = "gpio2", "gpio3"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| blsp_i2c2_default: blsp-i2c2-default-state { |
| pins = "gpio6", "gpio7"; |
| function = "blsp_i2c2"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| blsp_i2c2_sleep: blsp-i2c2-sleep-state { |
| pins = "gpio6", "gpio7"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| blsp_i2c3_default: blsp-i2c3-default-state { |
| pins = "gpio10", "gpio11"; |
| function = "blsp_i2c3"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| blsp_i2c3_sleep: blsp-i2c3-sleep-state { |
| pins = "gpio10", "gpio11"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| blsp_i2c4_default: blsp-i2c4-default-state { |
| pins = "gpio14", "gpio15"; |
| function = "blsp_i2c4"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| blsp_i2c4_sleep: blsp-i2c4-sleep-state { |
| pins = "gpio14", "gpio15"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| blsp_i2c5_default: blsp-i2c5-default-state { |
| pins = "gpio18", "gpio19"; |
| function = "blsp_i2c5"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| blsp_i2c5_sleep: blsp-i2c5-sleep-state { |
| pins = "gpio18", "gpio19"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| blsp_i2c6_default: blsp-i2c6-default-state { |
| pins = "gpio22", "gpio23"; |
| function = "blsp_i2c6"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| blsp_i2c6_sleep: blsp-i2c6-sleep-state { |
| pins = "gpio22", "gpio23"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| blsp_spi1_default: blsp-spi1-default-state { |
| spi-pins { |
| pins = "gpio0", "gpio1", "gpio3"; |
| function = "blsp_spi1"; |
| drive-strength = <12>; |
| bias-disable; |
| }; |
| |
| cs-pins { |
| pins = "gpio2"; |
| function = "gpio"; |
| drive-strength = <16>; |
| bias-disable; |
| output-high; |
| }; |
| }; |
| |
| blsp_spi1_sleep: blsp-spi1-sleep-state { |
| pins = "gpio0", "gpio1", "gpio2", "gpio3"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| blsp_spi2_default: blsp-spi2-default-state { |
| spi-pins { |
| pins = "gpio4", "gpio5", "gpio7"; |
| function = "blsp_spi2"; |
| drive-strength = <12>; |
| bias-disable; |
| }; |
| |
| cs-pins { |
| pins = "gpio6"; |
| function = "gpio"; |
| drive-strength = <16>; |
| bias-disable; |
| output-high; |
| }; |
| }; |
| |
| blsp_spi2_sleep: blsp-spi2-sleep-state { |
| pins = "gpio4", "gpio5", "gpio6", "gpio7"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| blsp_spi3_default: blsp-spi3-default-state { |
| spi-pins { |
| pins = "gpio8", "gpio9", "gpio11"; |
| function = "blsp_spi3"; |
| drive-strength = <12>; |
| bias-disable; |
| }; |
| |
| cs-pins { |
| pins = "gpio10"; |
| function = "gpio"; |
| drive-strength = <16>; |
| bias-disable; |
| output-high; |
| }; |
| }; |
| |
| blsp_spi3_sleep: blsp-spi3-sleep-state { |
| pins = "gpio8", "gpio9", "gpio10", "gpio11"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| blsp_spi4_default: blsp-spi4-default-state { |
| spi-pins { |
| pins = "gpio12", "gpio13", "gpio15"; |
| function = "blsp_spi4"; |
| drive-strength = <12>; |
| bias-disable; |
| }; |
| |
| cs-pins { |
| pins = "gpio14"; |
| function = "gpio"; |
| drive-strength = <16>; |
| bias-disable; |
| output-high; |
| }; |
| }; |
| |
| blsp_spi4_sleep: blsp-spi4-sleep-state { |
| pins = "gpio12", "gpio13", "gpio14", "gpio15"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| blsp_spi5_default: blsp-spi5-default-state { |
| spi-pins { |
| pins = "gpio16", "gpio17", "gpio19"; |
| function = "blsp_spi5"; |
| drive-strength = <12>; |
| bias-disable; |
| }; |
| |
| cs-pins { |
| pins = "gpio18"; |
| function = "gpio"; |
| drive-strength = <16>; |
| bias-disable; |
| output-high; |
| }; |
| }; |
| |
| blsp_spi5_sleep: blsp-spi5-sleep-state { |
| pins = "gpio16", "gpio17", "gpio18", "gpio19"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| blsp_spi6_default: blsp-spi6-default-state { |
| spi-pins { |
| pins = "gpio20", "gpio21", "gpio23"; |
| function = "blsp_spi6"; |
| drive-strength = <12>; |
| bias-disable; |
| }; |
| |
| cs-pins { |
| pins = "gpio22"; |
| function = "gpio"; |
| drive-strength = <16>; |
| bias-disable; |
| output-high; |
| }; |
| }; |
| |
| blsp_spi6_sleep: blsp-spi6-sleep-state { |
| pins = "gpio20", "gpio21", "gpio22", "gpio23"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| blsp_uart1_default: blsp-uart1-default-state { |
| pins = "gpio0", "gpio1", "gpio2", "gpio3"; |
| function = "blsp_uart1"; |
| drive-strength = <16>; |
| bias-disable; |
| }; |
| |
| blsp_uart1_sleep: blsp-uart1-sleep-state { |
| pins = "gpio0", "gpio1", "gpio2", "gpio3"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| blsp_uart2_default: blsp-uart2-default-state { |
| pins = "gpio4", "gpio5"; |
| function = "blsp_uart2"; |
| drive-strength = <16>; |
| bias-disable; |
| }; |
| |
| blsp_uart2_sleep: blsp-uart2-sleep-state { |
| pins = "gpio4", "gpio5"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| camera_front_default: camera-front-default-state { |
| pwdn-pins { |
| pins = "gpio33"; |
| function = "gpio"; |
| drive-strength = <16>; |
| bias-disable; |
| }; |
| |
| rst-pins { |
| pins = "gpio28"; |
| function = "gpio"; |
| drive-strength = <16>; |
| bias-disable; |
| }; |
| |
| mclk1-pins { |
| pins = "gpio27"; |
| function = "cam_mclk1"; |
| drive-strength = <16>; |
| bias-disable; |
| }; |
| }; |
| |
| camera_rear_default: camera-rear-default-state { |
| pwdn-pins { |
| pins = "gpio34"; |
| function = "gpio"; |
| drive-strength = <16>; |
| bias-disable; |
| }; |
| |
| rst-pins { |
| pins = "gpio35"; |
| function = "gpio"; |
| drive-strength = <16>; |
| bias-disable; |
| }; |
| |
| mclk0-pins { |
| pins = "gpio26"; |
| function = "cam_mclk0"; |
| drive-strength = <16>; |
| bias-disable; |
| }; |
| }; |
| |
| cci0_default: cci0-default-state { |
| pins = "gpio29", "gpio30"; |
| function = "cci_i2c"; |
| drive-strength = <16>; |
| bias-disable; |
| }; |
| |
| cdc_dmic_default: cdc-dmic-default-state { |
| clk-pins { |
| pins = "gpio0"; |
| function = "dmic0_clk"; |
| drive-strength = <8>; |
| }; |
| |
| data-pins { |
| pins = "gpio1"; |
| function = "dmic0_data"; |
| drive-strength = <8>; |
| }; |
| }; |
| |
| cdc_dmic_sleep: cdc-dmic-sleep-state { |
| clk-pins { |
| pins = "gpio0"; |
| function = "dmic0_clk"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| data-pins { |
| pins = "gpio1"; |
| function = "dmic0_data"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| }; |
| |
| cdc_pdm_default: cdc-pdm-default-state { |
| pins = "gpio63", "gpio64", "gpio65", "gpio66", |
| "gpio67", "gpio68"; |
| function = "cdc_pdm0"; |
| drive-strength = <8>; |
| bias-disable; |
| }; |
| |
| cdc_pdm_sleep: cdc-pdm-sleep-state { |
| pins = "gpio63", "gpio64", "gpio65", "gpio66", |
| "gpio67", "gpio68"; |
| function = "cdc_pdm0"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| pri_mi2s_default: mi2s-pri-default-state { |
| pins = "gpio113", "gpio114", "gpio115", "gpio116"; |
| function = "pri_mi2s"; |
| drive-strength = <8>; |
| bias-disable; |
| }; |
| |
| pri_mi2s_sleep: mi2s-pri-sleep-state { |
| pins = "gpio113", "gpio114", "gpio115", "gpio116"; |
| function = "pri_mi2s"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| pri_mi2s_mclk_default: mi2s-pri-mclk-default-state { |
| pins = "gpio116"; |
| function = "pri_mi2s"; |
| drive-strength = <8>; |
| bias-disable; |
| }; |
| |
| pri_mi2s_mclk_sleep: mi2s-pri-mclk-sleep-state { |
| pins = "gpio116"; |
| function = "pri_mi2s"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| pri_mi2s_ws_default: mi2s-pri-ws-default-state { |
| pins = "gpio110"; |
| function = "pri_mi2s_ws"; |
| drive-strength = <8>; |
| bias-disable; |
| }; |
| |
| pri_mi2s_ws_sleep: mi2s-pri-ws-sleep-state { |
| pins = "gpio110"; |
| function = "pri_mi2s_ws"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| sec_mi2s_default: mi2s-sec-default-state { |
| pins = "gpio112", "gpio117", "gpio118", "gpio119"; |
| function = "sec_mi2s"; |
| drive-strength = <8>; |
| bias-disable; |
| }; |
| |
| sec_mi2s_sleep: mi2s-sec-sleep-state { |
| pins = "gpio112", "gpio117", "gpio118", "gpio119"; |
| function = "sec_mi2s"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| sdc1_default: sdc1-default-state { |
| clk-pins { |
| pins = "sdc1_clk"; |
| bias-disable; |
| drive-strength = <16>; |
| }; |
| |
| cmd-pins { |
| pins = "sdc1_cmd"; |
| bias-pull-up; |
| drive-strength = <10>; |
| }; |
| |
| data-pins { |
| pins = "sdc1_data"; |
| bias-pull-up; |
| drive-strength = <10>; |
| }; |
| }; |
| |
| sdc1_sleep: sdc1-sleep-state { |
| clk-pins { |
| pins = "sdc1_clk"; |
| bias-disable; |
| drive-strength = <2>; |
| }; |
| |
| cmd-pins { |
| pins = "sdc1_cmd"; |
| bias-pull-up; |
| drive-strength = <2>; |
| }; |
| |
| data-pins { |
| pins = "sdc1_data"; |
| bias-pull-up; |
| drive-strength = <2>; |
| }; |
| }; |
| |
| sdc2_default: sdc2-default-state { |
| clk-pins { |
| pins = "sdc2_clk"; |
| bias-disable; |
| drive-strength = <16>; |
| }; |
| |
| cmd-pins { |
| pins = "sdc2_cmd"; |
| bias-pull-up; |
| drive-strength = <10>; |
| }; |
| |
| data-pins { |
| pins = "sdc2_data"; |
| bias-pull-up; |
| drive-strength = <10>; |
| }; |
| }; |
| |
| sdc2_sleep: sdc2-sleep-state { |
| clk-pins { |
| pins = "sdc2_clk"; |
| bias-disable; |
| drive-strength = <2>; |
| }; |
| |
| cmd-pins { |
| pins = "sdc2_cmd"; |
| bias-pull-up; |
| drive-strength = <2>; |
| }; |
| |
| data-pins { |
| pins = "sdc2_data"; |
| bias-pull-up; |
| drive-strength = <2>; |
| }; |
| }; |
| |
| wcss_wlan_default: wcss-wlan-default-state { |
| pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44"; |
| function = "wcss_wlan"; |
| drive-strength = <6>; |
| bias-pull-up; |
| }; |
| }; |
| |
| gcc: clock-controller@1800000 { |
| compatible = "qcom,gcc-msm8939"; |
| reg = <0x01800000 0x80000>; |
| clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, |
| <&sleep_clk>, |
| <&mdss_dsi0_phy 1>, |
| <&mdss_dsi0_phy 0>, |
| <0>, |
| <0>, |
| <0>; |
| clock-names = "xo", |
| "sleep_clk", |
| "dsi0pll", |
| "dsi0pllbyte", |
| "ext_mclk", |
| "ext_pri_i2s", |
| "ext_sec_i2s"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| }; |
| |
| tcsr_mutex: hwlock@1905000 { |
| compatible = "qcom,tcsr-mutex"; |
| reg = <0x01905000 0x20000>; |
| #hwlock-cells = <1>; |
| }; |
| |
| tcsr: syscon@1937000 { |
| compatible = "qcom,tcsr-msm8916", "syscon"; |
| reg = <0x01937000 0x30000>; |
| }; |
| |
| mdss: display-subsystem@1a00000 { |
| compatible = "qcom,mdss"; |
| reg = <0x01a00000 0x1000>, |
| <0x01ac8000 0x3000>; |
| reg-names = "mdss_phys", "vbif_phys"; |
| |
| interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| |
| clocks = <&gcc GCC_MDSS_AHB_CLK>, |
| <&gcc GCC_MDSS_AXI_CLK>, |
| <&gcc GCC_MDSS_VSYNC_CLK>; |
| clock-names = "iface", |
| "bus", |
| "vsync"; |
| |
| power-domains = <&gcc MDSS_GDSC>; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| #interrupt-cells = <1>; |
| ranges; |
| |
| status = "disabled"; |
| |
| mdss_mdp: display-controller@1a01000 { |
| compatible = "qcom,mdp5"; |
| reg = <0x01a01000 0x89000>; |
| reg-names = "mdp_phys"; |
| |
| interrupt-parent = <&mdss>; |
| interrupts = <0>; |
| |
| clocks = <&gcc GCC_MDSS_AHB_CLK>, |
| <&gcc GCC_MDSS_AXI_CLK>, |
| <&gcc GCC_MDSS_MDP_CLK>, |
| <&gcc GCC_MDSS_VSYNC_CLK>; |
| clock-names = "iface", |
| "bus", |
| "core", |
| "vsync"; |
| |
| iommus = <&apps_iommu 4>; |
| |
| interconnects = <&snoc_mm MASTER_MDP_PORT0 &bimc SLAVE_EBI_CH0>, |
| <&snoc_mm MASTER_MDP_PORT1 &bimc SLAVE_EBI_CH0>; |
| interconnect-names = "mdp0-mem", "mdp1-mem"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| mdss_mdp_intf1_out: endpoint { |
| remote-endpoint = <&mdss_dsi0_in>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| mdss_mdp_intf2_out: endpoint { |
| remote-endpoint = <&mdss_dsi1_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| mdss_dsi0: dsi@1a98000 { |
| compatible = "qcom,msm8916-dsi-ctrl", |
| "qcom,mdss-dsi-ctrl"; |
| reg = <0x01a98000 0x25c>; |
| reg-names = "dsi_ctrl"; |
| |
| interrupt-parent = <&mdss>; |
| interrupts = <4>; |
| |
| clocks = <&gcc GCC_MDSS_MDP_CLK>, |
| <&gcc GCC_MDSS_AHB_CLK>, |
| <&gcc GCC_MDSS_AXI_CLK>, |
| <&gcc GCC_MDSS_BYTE0_CLK>, |
| <&gcc GCC_MDSS_PCLK0_CLK>, |
| <&gcc GCC_MDSS_ESC0_CLK>; |
| clock-names = "mdp_core", |
| "iface", |
| "bus", |
| "byte", |
| "pixel", |
| "core"; |
| assigned-clocks = <&gcc BYTE0_CLK_SRC>, |
| <&gcc PCLK0_CLK_SRC>; |
| assigned-clock-parents = <&mdss_dsi0_phy 0>, |
| <&mdss_dsi0_phy 1>; |
| |
| phys = <&mdss_dsi0_phy>; |
| status = "disabled"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| mdss_dsi0_in: endpoint { |
| remote-endpoint = <&mdss_mdp_intf1_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| mdss_dsi0_out: endpoint { |
| }; |
| }; |
| }; |
| }; |
| |
| mdss_dsi0_phy: phy@1a98300 { |
| compatible = "qcom,dsi-phy-28nm-lp"; |
| reg = <0x01a98300 0xd4>, |
| <0x01a98500 0x280>, |
| <0x01a98780 0x30>; |
| reg-names = "dsi_pll", |
| "dsi_phy", |
| "dsi_phy_regulator"; |
| |
| clocks = <&gcc GCC_MDSS_AHB_CLK>, |
| <&rpmcc RPM_SMD_XO_CLK_SRC>; |
| clock-names = "iface", "ref"; |
| |
| #clock-cells = <1>; |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| mdss_dsi1: dsi@1aa0000 { |
| compatible = "qcom,msm8916-dsi-ctrl", |
| "qcom,mdss-dsi-ctrl"; |
| reg = <0x01aa0000 0x25c>; |
| reg-names = "dsi_ctrl"; |
| |
| interrupt-parent = <&mdss>; |
| interrupts = <5>; |
| |
| clocks = <&gcc GCC_MDSS_MDP_CLK>, |
| <&gcc GCC_MDSS_AHB_CLK>, |
| <&gcc GCC_MDSS_AXI_CLK>, |
| <&gcc GCC_MDSS_BYTE1_CLK>, |
| <&gcc GCC_MDSS_PCLK1_CLK>, |
| <&gcc GCC_MDSS_ESC1_CLK>; |
| clock-names = "mdp_core", |
| "iface", |
| "bus", |
| "byte", |
| "pixel", |
| "core"; |
| assigned-clocks = <&gcc BYTE1_CLK_SRC>, |
| <&gcc PCLK1_CLK_SRC>; |
| assigned-clock-parents = <&mdss_dsi0_phy 0>, |
| <&mdss_dsi0_phy 1>; |
| phys = <&mdss_dsi1_phy>; |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| mdss_dsi1_in: endpoint { |
| remote-endpoint = <&mdss_mdp_intf2_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| mdss_dsi1_out: endpoint { |
| }; |
| }; |
| }; |
| }; |
| |
| mdss_dsi1_phy: phy@1aa0300 { |
| compatible = "qcom,dsi-phy-28nm-lp"; |
| reg = <0x01aa0300 0xd4>, |
| <0x01aa0500 0x280>, |
| <0x01aa0780 0x30>; |
| reg-names = "dsi_pll", |
| "dsi_phy", |
| "dsi_phy_regulator"; |
| |
| clocks = <&gcc GCC_MDSS_AHB_CLK>, |
| <&rpmcc RPM_SMD_XO_CLK_SRC>; |
| clock-names = "iface", "ref"; |
| |
| #clock-cells = <1>; |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| gpu: gpu@1c00000 { |
| compatible = "qcom,adreno-405.0", "qcom,adreno"; |
| reg = <0x01c00000 0x10000>; |
| reg-names = "kgsl_3d0_reg_memory"; |
| interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "kgsl_3d0_irq"; |
| clock-names = "core", |
| "iface", |
| "mem", |
| "mem_iface", |
| "alt_mem_iface", |
| "gfx3d", |
| "rbbmtimer"; |
| clocks = <&gcc GCC_OXILI_GFX3D_CLK>, |
| <&gcc GCC_OXILI_AHB_CLK>, |
| <&gcc GCC_OXILI_GMEM_CLK>, |
| <&gcc GCC_BIMC_GFX_CLK>, |
| <&gcc GCC_BIMC_GPU_CLK>, |
| <&gcc GFX3D_CLK_SRC>, |
| <&gcc GCC_OXILI_TIMER_CLK>; |
| power-domains = <&gcc OXILI_GDSC>; |
| operating-points-v2 = <&opp_table>; |
| iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; |
| #cooling-cells = <2>; |
| |
| status = "disabled"; |
| |
| opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-550000000 { |
| opp-hz = /bits/ 64 <550000000>; |
| }; |
| |
| opp-465000000 { |
| opp-hz = /bits/ 64 <465000000>; |
| }; |
| |
| opp-400000000 { |
| opp-hz = /bits/ 64 <400000000>; |
| }; |
| |
| opp-220000000 { |
| opp-hz = /bits/ 64 <220000000>; |
| }; |
| |
| opp-19200000 { |
| opp-hz = /bits/ 64 <19200000>; |
| }; |
| }; |
| }; |
| |
| apps_iommu: iommu@1ef0000 { |
| compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; |
| reg = <0x01ef0000 0x3000>; |
| ranges = <0 0x01e20000 0x20000>; |
| clocks = <&gcc GCC_SMMU_CFG_CLK>, |
| <&gcc GCC_APSS_TCU_CLK>; |
| clock-names = "iface", "bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| #iommu-cells = <1>; |
| qcom,iommu-secure-id = <17>; |
| |
| /* mdp_0: */ |
| iommu-ctx@4000 { |
| compatible = "qcom,msm-iommu-v1-ns"; |
| reg = <0x4000 0x1000>; |
| interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| /* venus_ns: */ |
| iommu-ctx@5000 { |
| compatible = "qcom,msm-iommu-v1-sec"; |
| reg = <0x5000 0x1000>; |
| interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| gpu_iommu: iommu@1f08000 { |
| compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; |
| ranges = <0 0x1f08000 0x10000>; |
| clocks = <&gcc GCC_SMMU_CFG_CLK>, |
| <&gcc GCC_GFX_TCU_CLK>, |
| <&gcc GCC_GFX_TBU_CLK>; |
| clock-names = "iface", "bus", "tbu"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| #iommu-cells = <1>; |
| qcom,iommu-secure-id = <18>; |
| |
| /* gfx3d_user: */ |
| iommu-ctx@1000 { |
| compatible = "qcom,msm-iommu-v1-ns"; |
| reg = <0x1000 0x1000>; |
| interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| /* gfx3d_priv: */ |
| iommu-ctx@2000 { |
| compatible = "qcom,msm-iommu-v1-ns"; |
| reg = <0x2000 0x1000>; |
| interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| spmi_bus: spmi@200f000 { |
| compatible = "qcom,spmi-pmic-arb"; |
| reg = <0x0200f000 0x001000>, |
| <0x02400000 0x400000>, |
| <0x02c00000 0x400000>, |
| <0x03800000 0x200000>, |
| <0x0200a000 0x002100>; |
| reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; |
| interrupt-names = "periph_irq"; |
| interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; |
| qcom,ee = <0>; |
| qcom,channel = <0>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| interrupt-controller; |
| #interrupt-cells = <4>; |
| }; |
| |
| bam_dmux_dma: dma-controller@4044000 { |
| compatible = "qcom,bam-v1.7.0"; |
| reg = <0x04044000 0x19000>; |
| interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| #dma-cells = <1>; |
| qcom,ee = <0>; |
| |
| num-channels = <6>; |
| qcom,num-ees = <1>; |
| qcom,powered-remotely; |
| |
| status = "disabled"; |
| }; |
| |
| mpss: remoteproc@4080000 { |
| compatible = "qcom,msm8916-mss-pil"; |
| reg = <0x04080000 0x100>, <0x04020000 0x040>; |
| reg-names = "qdsp6", "rmb"; |
| interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, |
| <&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, |
| <&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, |
| <&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, |
| <&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "wdog", |
| "fatal", |
| "ready", |
| "handover", |
| "stop-ack"; |
| clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, |
| <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, |
| <&gcc GCC_BOOT_ROM_AHB_CLK>, |
| <&rpmcc RPM_SMD_XO_CLK_SRC>; |
| clock-names = "iface", |
| "bus", |
| "mem", |
| "xo"; |
| power-domains = <&rpmpd MSM8939_VDDMDCX>, |
| <&rpmpd MSM8939_VDDMX>; |
| power-domain-names = "cx", "mx"; |
| qcom,smem-states = <&hexagon_smp2p_out 0>; |
| qcom,smem-state-names = "stop"; |
| resets = <&scm 0>; |
| reset-names = "mss_restart"; |
| qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>; |
| status = "disabled"; |
| |
| bam_dmux: bam-dmux { |
| compatible = "qcom,bam-dmux"; |
| |
| interrupt-parent = <&hexagon_smsm>; |
| interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>; |
| interrupt-names = "pc", "pc-ack"; |
| |
| qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>; |
| qcom,smem-state-names = "pc", "pc-ack"; |
| |
| dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>; |
| dma-names = "tx", "rx"; |
| |
| status = "disabled"; |
| }; |
| |
| mba { |
| memory-region = <&mba_mem>; |
| }; |
| |
| mpss { |
| memory-region = <&mpss_mem>; |
| }; |
| |
| smd-edge { |
| interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; |
| |
| qcom,smd-edge = <0>; |
| mboxes = <&apcs1_mbox 12>; |
| qcom,remote-pid = <1>; |
| |
| label = "hexagon"; |
| |
| apr: apr { |
| compatible = "qcom,apr-v2"; |
| qcom,smd-channels = "apr_audio_svc"; |
| qcom,domain = <APR_DOMAIN_ADSP>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| q6core: service@3 { |
| compatible = "qcom,q6core"; |
| reg = <APR_SVC_ADSP_CORE>; |
| }; |
| |
| q6afe: service@4 { |
| compatible = "qcom,q6afe"; |
| reg = <APR_SVC_AFE>; |
| |
| q6afedai: dais { |
| compatible = "qcom,q6afe-dais"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #sound-dai-cells = <1>; |
| }; |
| }; |
| |
| q6asm: service@7 { |
| compatible = "qcom,q6asm"; |
| reg = <APR_SVC_ASM>; |
| |
| q6asmdai: dais { |
| compatible = "qcom,q6asm-dais"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #sound-dai-cells = <1>; |
| }; |
| }; |
| |
| q6adm: service@8 { |
| compatible = "qcom,q6adm"; |
| reg = <APR_SVC_ADM>; |
| |
| q6routing: routing { |
| compatible = "qcom,q6adm-routing"; |
| #sound-dai-cells = <0>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| sound: sound@7702000 { |
| compatible = "qcom,apq8016-sbc-sndcard"; |
| reg = <0x07702000 0x4>, |
| <0x07702004 0x4>; |
| reg-names = "mic-iomux", "spkr-iomux"; |
| status = "disabled"; |
| }; |
| |
| lpass: audio-controller@7708000 { |
| compatible = "qcom,apq8016-lpass-cpu"; |
| reg = <0x07708000 0x10000>; |
| reg-names = "lpass-lpaif"; |
| interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "lpass-irq-lpaif"; |
| clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, |
| <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, |
| <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, |
| <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, |
| <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>, |
| <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>, |
| <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>; |
| clock-names = "ahbix-clk", |
| "mi2s-bit-clk0", |
| "mi2s-bit-clk1", |
| "mi2s-bit-clk2", |
| "mi2s-bit-clk3", |
| "pcnoc-mport-clk", |
| "pcnoc-sway-clk"; |
| #sound-dai-cells = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| lpass_codec: audio-codec@771c000 { |
| compatible = "qcom,msm8916-wcd-digital-codec"; |
| reg = <0x0771c000 0x400>; |
| clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, |
| <&gcc GCC_CODEC_DIGCODEC_CLK>; |
| clock-names = "ahbix-clk", "mclk"; |
| #sound-dai-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| sdhc_1: mmc@7824900 { |
| compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; |
| reg = <0x07824900 0x11c>, <0x07824000 0x800>; |
| reg-names = "hc", "core"; |
| |
| interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "hc_irq", "pwr_irq"; |
| clocks = <&gcc GCC_SDCC1_AHB_CLK>, |
| <&gcc GCC_SDCC1_APPS_CLK>, |
| <&rpmcc RPM_SMD_XO_CLK_SRC>; |
| clock-names = "iface", "core", "xo"; |
| resets = <&gcc GCC_SDCC1_BCR>; |
| pinctrl-0 = <&sdc1_default>; |
| pinctrl-1 = <&sdc1_sleep>; |
| pinctrl-names = "default", "sleep"; |
| mmc-ddr-1_8v; |
| bus-width = <8>; |
| non-removable; |
| status = "disabled"; |
| }; |
| |
| sdhc_2: mmc@7864900 { |
| compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; |
| reg = <0x07864900 0x11c>, <0x07864000 0x800>; |
| reg-names = "hc", "core"; |
| |
| interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "hc_irq", "pwr_irq"; |
| clocks = <&gcc GCC_SDCC2_AHB_CLK>, |
| <&gcc GCC_SDCC2_APPS_CLK>, |
| <&rpmcc RPM_SMD_XO_CLK_SRC>; |
| clock-names = "iface", "core", "xo"; |
| resets = <&gcc GCC_SDCC2_BCR>; |
| pinctrl-0 = <&sdc2_default>; |
| pinctrl-1 = <&sdc2_sleep>; |
| pinctrl-names = "default", "sleep"; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| blsp_dma: dma-controller@7884000 { |
| compatible = "qcom,bam-v1.7.0"; |
| reg = <0x07884000 0x23000>; |
| interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "bam_clk"; |
| #dma-cells = <1>; |
| qcom,ee = <0>; |
| qcom,controlled-remotely; |
| }; |
| |
| blsp_uart1: serial@78af000 { |
| compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| reg = <0x078af000 0x200>; |
| interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 0>, <&blsp_dma 1>; |
| dma-names = "tx", "rx"; |
| pinctrl-0 = <&blsp_uart1_default>; |
| pinctrl-1 = <&blsp_uart1_sleep>; |
| pinctrl-names = "default", "sleep"; |
| status = "disabled"; |
| }; |
| |
| blsp_uart2: serial@78b0000 { |
| compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| reg = <0x078b0000 0x200>; |
| interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 2>, <&blsp_dma 3>; |
| dma-names = "tx", "rx"; |
| pinctrl-0 = <&blsp_uart2_default>; |
| pinctrl-1 = <&blsp_uart2_sleep>; |
| pinctrl-names = "default", "sleep"; |
| status = "disabled"; |
| }; |
| |
| blsp_i2c1: i2c@78b5000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x078b5000 0x500>; |
| interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 4>, <&blsp_dma 5>; |
| dma-names = "tx", "rx"; |
| pinctrl-0 = <&blsp_i2c1_default>; |
| pinctrl-1 = <&blsp_i2c1_sleep>; |
| pinctrl-names = "default", "sleep"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_spi1: spi@78b5000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0x078b5000 0x500>; |
| interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 4>, <&blsp_dma 5>; |
| dma-names = "tx", "rx"; |
| pinctrl-0 = <&blsp_spi1_default>; |
| pinctrl-1 = <&blsp_spi1_sleep>; |
| pinctrl-names = "default", "sleep"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_i2c2: i2c@78b6000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x078b6000 0x500>; |
| interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 6>, <&blsp_dma 7>; |
| dma-names = "tx", "rx"; |
| pinctrl-0 = <&blsp_i2c2_default>; |
| pinctrl-1 = <&blsp_i2c2_sleep>; |
| pinctrl-names = "default", "sleep"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_spi2: spi@78b6000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0x078b6000 0x500>; |
| interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 6>, <&blsp_dma 7>; |
| dma-names = "tx", "rx"; |
| pinctrl-0 = <&blsp_spi2_default>; |
| pinctrl-1 = <&blsp_spi2_sleep>; |
| pinctrl-names = "default", "sleep"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_i2c3: i2c@78b7000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x078b7000 0x500>; |
| interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 8>, <&blsp_dma 9>; |
| dma-names = "tx", "rx"; |
| pinctrl-0 = <&blsp_i2c3_default>; |
| pinctrl-1 = <&blsp_i2c3_sleep>; |
| pinctrl-names = "default", "sleep"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_spi3: spi@78b7000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0x078b7000 0x500>; |
| interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 8>, <&blsp_dma 9>; |
| dma-names = "tx", "rx"; |
| pinctrl-0 = <&blsp_spi3_default>; |
| pinctrl-1 = <&blsp_spi3_sleep>; |
| pinctrl-names = "default", "sleep"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_i2c4: i2c@78b8000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x078b8000 0x500>; |
| interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 10>, <&blsp_dma 11>; |
| dma-names = "tx", "rx"; |
| pinctrl-0 = <&blsp_i2c4_default>; |
| pinctrl-1 = <&blsp_i2c4_sleep>; |
| pinctrl-names = "default", "sleep"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_spi4: spi@78b8000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0x078b8000 0x500>; |
| interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 10>, <&blsp_dma 11>; |
| dma-names = "tx", "rx"; |
| pinctrl-0 = <&blsp_spi4_default>; |
| pinctrl-1 = <&blsp_spi4_sleep>; |
| pinctrl-names = "default", "sleep"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_i2c5: i2c@78b9000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x078b9000 0x500>; |
| interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 12>, <&blsp_dma 13>; |
| dma-names = "tx", "rx"; |
| pinctrl-0 = <&blsp_i2c5_default>; |
| pinctrl-1 = <&blsp_i2c5_sleep>; |
| pinctrl-names = "default", "sleep"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_spi5: spi@78b9000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0x078b9000 0x500>; |
| interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 12>, <&blsp_dma 13>; |
| dma-names = "tx", "rx"; |
| pinctrl-0 = <&blsp_spi5_default>; |
| pinctrl-1 = <&blsp_spi5_sleep>; |
| pinctrl-names = "default", "sleep"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_i2c6: i2c@78ba000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x078ba000 0x500>; |
| interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 14>, <&blsp_dma 15>; |
| dma-names = "tx", "rx"; |
| pinctrl-0 = <&blsp_i2c6_default>; |
| pinctrl-1 = <&blsp_i2c6_sleep>; |
| pinctrl-names = "default", "sleep"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_spi6: spi@78ba000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0x078ba000 0x500>; |
| interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp_dma 14>, <&blsp_dma 15>; |
| dma-names = "tx", "rx"; |
| pinctrl-0 = <&blsp_spi6_default>; |
| pinctrl-1 = <&blsp_spi6_sleep>; |
| pinctrl-names = "default", "sleep"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| usb: usb@78d9000 { |
| compatible = "qcom,ci-hdrc"; |
| reg = <0x078d9000 0x200>, |
| <0x078d9200 0x200>; |
| interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_USB_HS_AHB_CLK>, |
| <&gcc GCC_USB_HS_SYSTEM_CLK>; |
| clock-names = "iface", "core"; |
| assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; |
| assigned-clock-rates = <80000000>; |
| resets = <&gcc GCC_USB_HS_BCR>; |
| reset-names = "core"; |
| #reset-cells = <1>; |
| phy_type = "ulpi"; |
| dr_mode = "otg"; |
| adp-disable; |
| hnp-disable; |
| srp-disable; |
| ahb-burst-config = <0>; |
| phy-names = "usb-phy"; |
| phys = <&usb_hs_phy>; |
| status = "disabled"; |
| |
| ulpi { |
| usb_hs_phy: phy { |
| compatible = "qcom,usb-hs-phy-msm8916", |
| "qcom,usb-hs-phy"; |
| clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, |
| <&gcc GCC_USB2A_PHY_SLEEP_CLK>; |
| clock-names = "ref", "sleep"; |
| resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>; |
| reset-names = "phy", "por"; |
| #phy-cells = <0>; |
| qcom,init-seq = /bits/ 8 <0x0 0x44>, |
| <0x1 0x6b>, |
| <0x2 0x24>, |
| <0x3 0x13>; |
| }; |
| }; |
| }; |
| |
| wcnss: remoteproc@a204000 { |
| compatible = "qcom,pronto-v2-pil", "qcom,pronto"; |
| interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, |
| <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, |
| <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, |
| <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, |
| <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "wdog", |
| "fatal", |
| "ready", |
| "handover", |
| "stop-ack"; |
| reg = <0x0a204000 0x2000>, |
| <0x0a202000 0x1000>, |
| <0x0a21b000 0x3000>; |
| reg-names = "ccu", "dxe", "pmu"; |
| |
| memory-region = <&wcnss_mem>; |
| |
| power-domains = <&rpmpd MSM8939_VDDCX>, |
| <&rpmpd MSM8939_VDDMX>; |
| power-domain-names = "cx", "mx"; |
| |
| qcom,smem-states = <&wcnss_smp2p_out 0>; |
| qcom,smem-state-names = "stop"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&wcss_wlan_default>; |
| |
| status = "disabled"; |
| |
| wcnss_iris: iris { |
| /* Separate chip, compatible is board-specific */ |
| clocks = <&rpmcc RPM_SMD_RF_CLK2>; |
| clock-names = "xo"; |
| }; |
| |
| smd-edge { |
| interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; |
| qcom,ipc = <&apcs1_mbox 8 17>; |
| qcom,smd-edge = <6>; |
| qcom,remote-pid = <4>; |
| |
| label = "pronto"; |
| |
| wcnss { |
| compatible = "qcom,wcnss"; |
| qcom,smd-channels = "WCNSS_CTRL"; |
| |
| qcom,mmio = <&wcnss>; |
| |
| wcnss_bt: bluetooth { |
| compatible = "qcom,wcnss-bt"; |
| }; |
| |
| wcnss_wifi: wifi { |
| compatible = "qcom,wcnss-wlan"; |
| |
| interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "tx", "rx"; |
| |
| qcom,smem-states = <&apps_smsm 10>, |
| <&apps_smsm 9>; |
| qcom,smem-state-names = "tx-enable", |
| "tx-rings-empty"; |
| }; |
| }; |
| }; |
| }; |
| |
| intc: interrupt-controller@b000000 { |
| compatible = "qcom,msm-qgic2"; |
| reg = <0x0b000000 0x1000>, <0x0b002000 0x2000>, |
| <0x0b001000 0x1000>, <0x0b004000 0x2000>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; |
| }; |
| |
| apcs1_mbox: mailbox@b011000 { |
| compatible = "qcom,msm8939-apcs-kpss-global", "syscon"; |
| reg = <0x0b011000 0x1000>; |
| clocks = <&a53pll_c1>, <&gcc GPLL0_VOTE>, <&rpmcc RPM_SMD_XO_CLK_SRC>; |
| clock-names = "pll", "aux", "ref"; |
| #clock-cells = <0>; |
| assigned-clocks = <&apcs2>; |
| assigned-clock-rates = <297600000>; |
| #mbox-cells = <1>; |
| }; |
| |
| a53pll_c1: clock@b016000 { |
| compatible = "qcom,msm8939-a53pll"; |
| reg = <0x0b016000 0x40>; |
| #clock-cells = <0>; |
| }; |
| |
| acc0: clock-controller@b088000 { |
| compatible = "qcom,kpss-acc-v2"; |
| reg = <0x0b088000 0x1000>; |
| }; |
| |
| saw0: power-manager@b089000 { |
| compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; |
| reg = <0x0b089000 0x1000>; |
| }; |
| |
| acc1: clock-controller@b098000 { |
| compatible = "qcom,kpss-acc-v2"; |
| reg = <0x0b098000 0x1000>; |
| }; |
| |
| saw1: power-manager@b099000 { |
| compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; |
| reg = <0x0b099000 0x1000>; |
| }; |
| |
| acc2: clock-controller@b0a8000 { |
| compatible = "qcom,kpss-acc-v2"; |
| reg = <0x0b0a8000 0x1000>; |
| }; |
| |
| saw2: power-manager@b0a9000 { |
| compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; |
| reg = <0x0b0a9000 0x1000>; |
| }; |
| |
| acc3: clock-controller@b0b8000 { |
| compatible = "qcom,kpss-acc-v2"; |
| reg = <0x0b0b8000 0x1000>; |
| }; |
| |
| saw3: power-manager@b0b9000 { |
| compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; |
| reg = <0x0b0b9000 0x1000>; |
| }; |
| |
| apcs0_mbox: mailbox@b111000 { |
| compatible = "qcom,msm8939-apcs-kpss-global", "syscon"; |
| reg = <0x0b111000 0x1000>; |
| clocks = <&a53pll_c0>, <&gcc GPLL0_VOTE>, <&rpmcc RPM_SMD_XO_CLK_SRC>; |
| clock-names = "pll", "aux", "ref"; |
| #clock-cells = <0>; |
| #mbox-cells = <1>; |
| }; |
| |
| a53pll_c0: clock@b116000 { |
| compatible = "qcom,msm8939-a53pll"; |
| reg = <0x0b116000 0x40>; |
| #clock-cells = <0>; |
| }; |
| |
| timer@b120000 { |
| compatible = "arm,armv7-timer-mem"; |
| reg = <0x0b120000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| /* Necessary because firmware does not configure this correctly */ |
| clock-frequency = <19200000>; |
| |
| frame@b121000 { |
| reg = <0x0b121000 0x1000>, |
| <0x0b122000 0x1000>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| frame-number = <0>; |
| }; |
| |
| frame@b123000 { |
| reg = <0x0b123000 0x1000>; |
| interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| frame-number = <1>; |
| status = "disabled"; |
| }; |
| |
| frame@b124000 { |
| reg = <0x0b124000 0x1000>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| frame-number = <2>; |
| status = "disabled"; |
| }; |
| |
| frame@b125000 { |
| reg = <0x0b125000 0x1000>; |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| frame-number = <3>; |
| status = "disabled"; |
| }; |
| |
| frame@b126000 { |
| reg = <0x0b126000 0x1000>; |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| frame-number = <4>; |
| status = "disabled"; |
| }; |
| |
| frame@b127000 { |
| reg = <0x0b127000 0x1000>; |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| frame-number = <5>; |
| status = "disabled"; |
| }; |
| |
| frame@b128000 { |
| reg = <0x0b128000 0x1000>; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| frame-number = <6>; |
| status = "disabled"; |
| }; |
| }; |
| |
| acc4: clock-controller@b188000 { |
| compatible = "qcom,kpss-acc-v2"; |
| reg = <0x0b188000 0x1000>; |
| }; |
| |
| saw4: power-manager@b189000 { |
| compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; |
| reg = <0x0b189000 0x1000>; |
| }; |
| |
| acc5: clock-controller@b198000 { |
| compatible = "qcom,kpss-acc-v2"; |
| reg = <0x0b198000 0x1000>; |
| }; |
| |
| saw5: power-manager@b199000 { |
| compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; |
| reg = <0x0b199000 0x1000>; |
| }; |
| |
| acc6: clock-controller@b1a8000 { |
| compatible = "qcom,kpss-acc-v2"; |
| reg = <0x0b1a8000 0x1000>; |
| }; |
| |
| saw6: power-manager@b1a9000 { |
| compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; |
| reg = <0x0b1a9000 0x1000>; |
| }; |
| |
| acc7: clock-controller@b1b8000 { |
| compatible = "qcom,kpss-acc-v2"; |
| reg = <0x0b1b8000 0x1000>; |
| }; |
| |
| saw7: power-manager@b1b9000 { |
| compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; |
| reg = <0x0b1b9000 0x1000>; |
| }; |
| |
| a53pll_cci: clock@b1d0000 { |
| compatible = "qcom,msm8939-a53pll"; |
| reg = <0x0b1d0000 0x40>; |
| #clock-cells = <0>; |
| }; |
| |
| apcs2: mailbox@b1d1000 { |
| compatible = "qcom,msm8939-apcs-kpss-global", "syscon"; |
| reg = <0x0b1d1000 0x1000>; |
| clocks = <&a53pll_cci>, <&gcc GPLL0_VOTE>, <&rpmcc RPM_SMD_XO_CLK_SRC>; |
| clock-names = "pll", "aux", "ref"; |
| #clock-cells = <0>; |
| #mbox-cells = <1>; |
| }; |
| }; |
| |
| thermal_zones: thermal-zones { |
| cpu0-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens 5>; |
| |
| trips { |
| cpu0_alert: trip0 { |
| temperature = <75000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu0_crit: trip1 { |
| temperature = <115000>; |
| hysteresis = <0>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu0_alert>; |
| cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| cpu1-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens 6>; |
| |
| trips { |
| cpu1_alert: trip0 { |
| temperature = <75000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu1_crit: trip1 { |
| temperature = <110000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu1_alert>; |
| cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| cpu2-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens 7>; |
| |
| trips { |
| cpu2_alert: trip0 { |
| temperature = <75000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu2_crit: trip1 { |
| temperature = <110000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu2_alert>; |
| cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| cpu3-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens 8>; |
| |
| trips { |
| cpu3_alert: trip0 { |
| temperature = <75000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu3_crit: trip1 { |
| temperature = <110000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu3_alert>; |
| cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| cpu4567-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens 9>; |
| |
| trips { |
| cpu4567_alert: trip0 { |
| temperature = <75000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu4567_crit: trip1 { |
| temperature = <110000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu4567_alert>; |
| cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| }; |
| |
| gpu-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens 3>; |
| |
| cooling-maps { |
| map0 { |
| trip = <&gpu_alert0>; |
| cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| |
| trips { |
| gpu_alert0: trip-point0 { |
| temperature = <75000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| gpu_crit: gpu-crit { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| modem1-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens 0>; |
| |
| trips { |
| modem1_alert0: trip-point0 { |
| temperature = <85000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| }; |
| }; |
| |
| modem2-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens 2>; |
| |
| trips { |
| modem2_alert0: trip-point0 { |
| temperature = <85000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| }; |
| }; |
| |
| camera-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens 1>; |
| |
| trips { |
| cam_alert0: trip-point0 { |
| temperature = <75000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| }; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| }; |
