blob: 5ab583be9e0a00019c1b331fda951690baf8e378 [file] [log] [blame]
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2020, Yassine Oudjana <y.oudjana@protonmail.com>
*/
#include "pm8994.dtsi"
#include "pmi8994.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
divclk1_cdc: divclk1 {
compatible = "gpio-gate-clock";
clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
#clock-cells = <0>;
enable-gpios = <&pm8994_gpios 15 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&divclk1_default>;
};
divclk4: divclk4 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "divclk4";
pinctrl-names = "default";
pinctrl-0 = <&divclk4_pin_a>;
};
gpio-keys {
compatible = "gpio-keys";
key-vol-up {
label = "Volume Up";
gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
wakeup-source;
debounce-interval = <15>;
};
key-dome {
label = "Home";
gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
wakeup-source;
debounce-interval = <15>;
};
};
irled {
compatible = "pwm-ir-tx";
pwms = <&pm8994_lpg 1 1000000>;
pinctrl-names = "default";
pinctrl-0 = <&irled_default>;
};
reserved-memory {
memory@88800000 {
reg = <0x0 0x88800000 0x0 0x1400000>;
no-map;
};
/* This platform has all PIL regions offset by 0x1400000 */
/delete-node/ mpss@88800000;
mpss_mem: mpss@89c00000 {
reg = <0x0 0x89c00000 0x0 0x6200000>;
no-map;
};
/delete-node/ adsp@8ea00000;
adsp_mem: adsp@8fe00000 {
reg = <0x0 0x8fe00000 0x0 0x1b00000>;
no-map;
};
/delete-node/ slpi@90500000;
slpi_mem: slpi@91900000 {
reg = <0x0 0x91900000 0x0 0xa00000>;
no-map;
};
/delete-node/ gpu@90f00000;
gpu_mem: gpu@92300000 {
compatible = "shared-dma-pool";
reg = <0x0 0x92300000 0x0 0x2000>;
no-map;
};
/delete-node/ venus@91000000;
venus_mem: venus@92400000 {
reg = <0x0 0x92400000 0x0 0x500000>;
no-map;
};
ramoops@92900000 {
compatible = "ramoops";
reg = <0x0 0x92900000 0x0 0x100000>;
no-map;
record-size = <0x8000>;
console-size = <0x80000>;
ftrace-size = <0x20000>;
pmsg-size = <0x40000>;
};
/delete-node/ rmtfs;
rmtfs@f6c00000 {
compatible = "qcom,rmtfs-mem";
reg = <0 0xf6c00000 0 0x200000>;
no-map;
qcom,client-id = <1>;
qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
};
/delete-node/ mba@91500000;
mba_mem: mba@f6f00000 {
reg = <0x0 0xf6f00000 0x0 0x100000>;
no-map;
};
};
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
regulator-min-microvolt = <3800000>;
regulator-max-microvolt = <3800000>;
regulator-always-on;
regulator-boot-on;
};
vdd_3v2_tp: vdd-3v2-tp {
compatible = "regulator-fixed";
regulator-name = "vdd_3v2_tp";
regulator-min-microvolt = <3200000>;
regulator-max-microvolt = <3200000>;
startup-delay-us = <4000>;
vin-supply = <&vph_pwr>;
gpio = <&tlmm 73 0>;
enable-active-high;
};
vdd_3v3: rome-vreg {
compatible = "regulator-fixed";
regulator-name = "vdd_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <4000>;
vin-supply = <&vph_pwr_bbyp>;
gpio = <&pm8994_gpios 9 0>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&rome_enable_default>;
/* Required by QCA6174a - vddpe-3v3 */
regulator-always-on;
};
/* WL_EN pin defined as a fixed regulator */
wlan_en: wlan-en-1-8v {
compatible = "regulator-fixed";
regulator-name = "wlan-en-regulator";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&pm8994_gpios 8 0>;
/* WLAN card specific delay */
startup-delay-us = <70000>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&wlan_en_default>;
};
};
&adsp_pil {
status = "okay";
};
&blsp2_i2c2 {
status = "okay";
clock-frequency = <400000>;
nfc: nfc@28 {
compatible = "nxp,nxp-nci-i2c";
reg = <0x28>;
interrupt-parent = <&tlmm>;
interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
firmware-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&nfc_default>;
};
};
&blsp2_i2c3 {
status = "okay";
typec: typec@47 {
compatible = "ti,tusb320l";
reg = <0x47>;
interrupt-parent = <&tlmm>;
interrupts = <63 IRQ_TYPE_EDGE_RISING>;
};
};
&blsp2_i2c6 {
status = "okay";
/* MSM_TS */
};
&blsp1_uart2 {
status = "okay";
label = "QCA_UART";
bluetooth: bluetooth {
compatible = "qcom,qca6174-bt";
enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
clocks = <&divclk4>;
};
};
&gpu {
status = "okay";
};
&mdss {
status = "okay";
};
&mdss_dsi0 {
status = "okay";
vdd-supply = <&vreg_l2a_1p25>;
vddio-supply = <&vreg_l14a_1p8>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mdss_dsi_default &mdss_te_default>;
pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>;
};
&mdss_dsi0_out {
status = "okay";
data-lanes = <0 1 2 3>;
};
&mdss_dsi0_phy {
status = "okay";
vcca-supply = <&vreg_l28a_0p925>;
};
&mmcc {
vdd-gfx-supply = <&vdd_gfx>;
};
&mss_pil {
status = "okay";
pll-supply = <&vreg_l12a_1p8>;
};
&pcie0 {
status = "okay";
/* Supplied by vdd_3v3, but choose wlan_en to drive enable pin high */
vddpe-3v3-supply = <&wlan_en>;
vdda-supply = <&vreg_l28a_0p925>;
perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
};
&pcie_phy {
status = "okay";
vdda-phy-supply = <&vreg_l28a_0p925>;
vdda-pll-supply = <&vreg_l12a_1p8>;
};
&pm8994_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
};
&pm8994_lpg {
status = "okay";
qcom,power-source = <1>;
};
&pmi8994_lpg {
status = "okay";
qcom,power-source = <1>;
multi-led {
color = <LED_COLOR_ID_RGB>;
function = LED_FUNCTION_STATUS;
#address-cells = <1>;
#size-cells = <0>;
led@1 {
reg = <1>;
color = <LED_COLOR_ID_BLUE>;
};
led@2 {
reg = <2>;
color = <LED_COLOR_ID_GREEN>;
};
led@3 {
reg = <3>;
color = <LED_COLOR_ID_RED>;
};
};
};
&slim_msm {
status = "okay";
slim@1 {
reg = <1>;
#address-cells = <2>;
#size-cells = <0>;
tasha_ifd: tas-ifd@0,0 {
compatible = "slim217,1a0";
reg = <0 0>;
};
wcd9335: codec@1,0 {
compatible = "slim217,1a0";
reg = <1 0>;
clock-names = "mclk", "slimbus";
clocks = <&divclk1_cdc>,
<&rpmcc RPM_SMD_BB_CLK1>;
interrupt-parent = <&tlmm>;
interrupts = <54 IRQ_TYPE_LEVEL_HIGH>,
<53 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "intr1", "intr2";
interrupt-controller;
#interrupt-cells = <1>;
pinctrl-0 = <&cdc_reset_active &wcd_intr_default>;
pinctrl-names = "default";
reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
slim-ifc-dev = <&tasha_ifd>;
#sound-dai-cells = <1>;
vdd-buck-supply = <&vreg_s4a_1p8>;
vdd-buck-sido-supply = <&vreg_s4a_1p8>;
vdd-rx-supply = <&vreg_s4a_1p8>;
vdd-tx-supply = <&vreg_s4a_1p8>;
vdd-vbat-supply = <&vph_pwr>;
vdd-micbias-supply = <&vph_pwr_bbyp>;
vdd-io-supply = <&vreg_s4a_1p8>;
};
};
};
&slpi_pil {
status = "okay";
px-supply = <&vreg_lvs2a_1p8>;
};
&usb3 {
status = "okay";
extcon = <&typec>;
qcom,select-utmi-as-pipe-clk;
};
&usb3_dwc3 {
extcon = <&typec>;
/* usb3-phy is not used on this device */
phys = <&hsusb_phy1>;
phy-names = "usb2-phy";
maximum-speed = "high-speed";
snps,is-utmi-l1-suspend;
snps,usb2-gadget-lpm-disable;
snps,hird-threshold = /bits/ 8 <0>;
};
&hsusb_phy1 {
status = "okay";
extcon = <&typec>;
vdda-pll-supply = <&vreg_l12a_1p8>;
vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
};
&ufshc {
status = "okay";
vcc-supply = <&vreg_l20a_2p95>;
vccq-supply = <&vreg_l25a_1p2>;
vccq2-supply = <&vreg_s4a_1p8>;
vdd-hba-supply = <&vreg_l25a_1p2>;
vcc-max-microamp = <600000>;
vccq-max-microamp = <450000>;
vccq2-max-microamp = <450000>;
};
&ufsphy {
status = "okay";
vdda-phy-supply = <&vreg_l28a_0p925>;
vdda-pll-supply = <&vreg_l12a_1p8>;
};
&venus {
status = "okay";
};
&rpm_requests {
regulators-0 {
compatible = "qcom,rpm-pm8994-regulators";
vdd_s1-supply = <&vph_pwr>;
vdd_s2-supply = <&vph_pwr>;
vdd_s3-supply = <&vph_pwr>;
vdd_s4-supply = <&vph_pwr>;
vdd_s5-supply = <&vph_pwr>;
vdd_s6-supply = <&vph_pwr>;
vdd_s7-supply = <&vph_pwr>;
vdd_s8-supply = <&vph_pwr>;
vdd_s9-supply = <&vph_pwr>;
vdd_s10-supply = <&vph_pwr>;
vdd_s11-supply = <&vph_pwr>;
vdd_s12-supply = <&vph_pwr>;
vdd_l1-supply = <&vreg_s1b_1p025>;
vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
vdd_l3_l11-supply = <&vreg_s3a_1p3>;
vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
vdd_l5_l7-supply = <&vreg_s5a_2p15>;
vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
vdd_l8_l16_l30-supply = <&vph_pwr>;
vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>;
vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>;
vdd_l14_l15-supply = <&vreg_s5a_2p15>;
vdd_l17_l29-supply = <&vph_pwr_bbyp>;
vdd_l20_l21-supply = <&vph_pwr_bbyp>;
vdd_l25-supply = <&vreg_s3a_1p3>;
vdd_lvs1_2-supply = <&vreg_s4a_1p8>;
vreg_s3a_1p3: s3 {
regulator-name = "vreg_s3a_1p3";
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
/* Required by QCA6174a - vdd-core */
regulator-always-on;
};
vreg_s4a_1p8: s4 {
regulator-name = "vreg_s4a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-allow-set-load;
/* Required by QCA6174a - vddio */
regulator-always-on;
};
vreg_s5a_2p15: s5 {
regulator-name = "vreg_s5a_2p15";
regulator-min-microvolt = <2150000>;
regulator-max-microvolt = <2150000>;
};
vreg_s7a_0p8: s7 {
regulator-name = "vreg_s7a_0p8";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
};
vreg_l1a_1p0: l1 {
regulator-name = "vreg_l1a_1p0";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
vreg_l2a_1p25: l2 {
regulator-name = "vreg_l2a_1p25";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1250000>;
};
vreg_l4a_1p225: l4 {
regulator-name = "vreg_l4a_1p225";
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
vreg_l6a_1p8: l6 {
regulator-name = "vreg_l6a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l8a_1p8: l8 {
regulator-name = "vreg_l8a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l9a_1p8: l9 {
regulator-name = "vreg_l9a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l10a_1p8: l10 {
regulator-name = "vreg_l10a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l12a_1p8: l12 {
regulator-name = "vreg_l12a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-allow-set-load;
};
vreg_l13a_2p95: l13 {
regulator-name = "vreg_l13a_2p95";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
vreg_l14a_1p8: l14 {
regulator-name = "vreg_l14a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l15a_1p8: l15 {
regulator-name = "vreg_l15a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_l16a_2p7: l16 {
regulator-name = "vreg_l16a_2p7";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
};
vreg_l19a_3p3: l19 {
regulator-name = "vreg_l19a_3p3";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
vreg_l20a_2p95: l20 {
regulator-name = "vreg_l20a_2p95";
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
regulator-allow-set-load;
};
vreg_l21a_2p95: l21 {
regulator-name = "vreg_l21a_2p95";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vreg_l23a_2p8: l23 {
regulator-name = "vreg_l23a_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
vreg_l24a_3p075: l24 {
regulator-name = "vreg_l24a_3p075";
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
};
vreg_l25a_1p2: l25 {
regulator-name = "vreg_l25a_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-allow-set-load;
};
vreg_l27a_1p2: l27 {
regulator-name = "vreg_l27a_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
vreg_l28a_0p925: l28 {
regulator-name = "vreg_l28a_0p925";
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <925000>;
regulator-allow-set-load;
};
vreg_l30a_1p8: l30 {
regulator-name = "vreg_l30a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
/* Required by QCA6174a - vddio-xtal */
regulator-always-on;
};
vreg_l32a_1p8: l32 {
regulator-name = "vreg_l32a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_lvs1a_1p8: lvs1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_lvs2a_1p8: lvs2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
};
regulators-1 {
compatible = "qcom,rpm-pmi8994-regulators";
vdd_s1-supply = <&vph_pwr>;
vdd_s2-supply = <&vph_pwr>;
vdd_s3-supply = <&vph_pwr>;
vdd_bst_byp-supply = <&vph_pwr>;
vreg_s1b_1p025: s1 {
regulator-name = "vreg_s1b_1p025";
regulator-min-microvolt = <1025000>;
regulator-max-microvolt = <1025000>;
};
vph_pwr_bbyp: boost-bypass {
regulator-name = "vph_pwr_bbyp";
regulator-min-microvolt = <3150000>;
regulator-max-microvolt = <3600000>;
};
};
};
&pm8994_spmi_regulators {
qcom,saw-reg = <&saw3>;
s8 {
qcom,saw-slave;
};
s9 {
qcom,saw-slave;
};
s10 {
qcom,saw-slave;
};
vreg_apc_0p8: s11 {
qcom,saw-leader;
regulator-name = "vreg_apc_0p8";
regulator-min-microvolt = <470000>;
regulator-max-microvolt = <1140000>;
regulator-max-step-microvolt = <150000>;
regulator-always-on;
};
};
&pmi8994_spmi_regulators {
vdd_gfx: s2 {
regulator-name = "vdd_gfx";
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1015000>;
regulator-enable-ramp-delay = <500>;
};
};
&pm8994_gpios {
irled_default: irled-default-state {
pins = "gpio5";
function = PMIC_GPIO_FUNC_FUNC1;
output-low;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
power-source = <PM8994_GPIO_S4>;
bias-disable;
};
wlan_en_default: wlan-en-state {
pins = "gpio8";
function = PMIC_GPIO_FUNC_NORMAL;
output-low;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
power-source = <PM8994_GPIO_S4>;
bias-disable;
};
rome_enable_default: rome-enable-state {
pins = "gpio9";
function = PMIC_GPIO_FUNC_NORMAL;
output-high;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
power-source = <PM8994_GPIO_VPH>;
};
divclk1_default: divclk1-state {
pins = "gpio15";
function = PMIC_GPIO_FUNC_FUNC1;
bias-disable;
power-source = <PM8994_GPIO_S4>;
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
};
divclk4_pin_a: divclk4-state {
pins = "gpio18";
function = PMIC_GPIO_FUNC_FUNC2;
bias-disable;
power-source = <PM8994_GPIO_S4>;
};
};
&tlmm {
mdss_dsi_default: mdss-dsi-default-state {
pins = "gpio8";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
mdss_dsi_sleep: mdss-dsi-sleep-state {
pins = "gpio8";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
mdss_te_default: mdss-te-default-state {
pins = "gpio10";
function = "mdp_vsync";
drive-strength = <2>;
bias-pull-down;
};
mdss_te_sleep: mdss-te-sleep-state {
pins = "gpio10";
function = "mdp_vsync";
drive-strength = <2>;
bias-pull-down;
};
nfc_default: nfc-default-state {
pins = "gpio12", "gpio21";
function = "gpio";
drive-strength = <16>;
bias-pull-up;
};
};