blob: 4dfe2d09ac2859d1da4341954fc42450696f92ef [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8998.h>
#include <dt-bindings/clock/qcom,gpucc-msm8998.h>
#include <dt-bindings/clock/qcom,mmcc-msm8998.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/firmware/qcom,scm.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/gpio/gpio.h>
/ {
interrupt-parent = <&intc>;
qcom,msm-id = <292 0x0>;
#address-cells = <2>;
#size-cells = <2>;
chosen { };
memory@80000000 {
device_type = "memory";
/* We expect the bootloader to fill in the reg */
reg = <0x0 0x80000000 0x0 0x0>;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
hyp_mem: memory@85800000 {
reg = <0x0 0x85800000 0x0 0x600000>;
no-map;
};
xbl_mem: memory@85e00000 {
reg = <0x0 0x85e00000 0x0 0x100000>;
no-map;
};
smem_mem: smem-mem@86000000 {
reg = <0x0 0x86000000 0x0 0x200000>;
no-map;
};
tz_mem: memory@86200000 {
reg = <0x0 0x86200000 0x0 0x2d00000>;
no-map;
};
rmtfs_mem: memory@88f00000 {
compatible = "qcom,rmtfs-mem";
reg = <0x0 0x88f00000 0x0 0x200000>;
no-map;
qcom,client-id = <1>;
qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
};
spss_mem: memory@8ab00000 {
reg = <0x0 0x8ab00000 0x0 0x700000>;
no-map;
};
adsp_mem: memory@8b200000 {
reg = <0x0 0x8b200000 0x0 0x1a00000>;
no-map;
};
mpss_mem: memory@8cc00000 {
reg = <0x0 0x8cc00000 0x0 0x7000000>;
no-map;
};
venus_mem: memory@93c00000 {
reg = <0x0 0x93c00000 0x0 0x500000>;
no-map;
};
mba_mem: memory@94100000 {
reg = <0x0 0x94100000 0x0 0x200000>;
no-map;
};
slpi_mem: memory@94300000 {
reg = <0x0 0x94300000 0x0 0xf00000>;
no-map;
};
ipa_fw_mem: memory@95200000 {
reg = <0x0 0x95200000 0x0 0x10000>;
no-map;
};
ipa_gsi_mem: memory@95210000 {
reg = <0x0 0x95210000 0x0 0x5000>;
no-map;
};
gpu_mem: memory@95600000 {
reg = <0x0 0x95600000 0x0 0x100000>;
no-map;
};
wlan_msa_mem: memory@95700000 {
reg = <0x0 0x95700000 0x0 0x100000>;
no-map;
};
mdata_mem: mpss-metadata {
alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>;
size = <0x0 0x4000>;
no-map;
};
};
clocks {
xo: xo-board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
clock-output-names = "xo_board";
};
sleep_clk: sleep-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32764>;
};
};
cpus {
#address-cells = <2>;
#size-cells = <0>;
CPU0: cpu@0 {
device_type = "cpu";
compatible = "qcom,kryo280";
reg = <0x0 0x0>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-unified;
};
};
CPU1: cpu@1 {
device_type = "cpu";
compatible = "qcom,kryo280";
reg = <0x0 0x1>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
next-level-cache = <&L2_0>;
};
CPU2: cpu@2 {
device_type = "cpu";
compatible = "qcom,kryo280";
reg = <0x0 0x2>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
next-level-cache = <&L2_0>;
};
CPU3: cpu@3 {
device_type = "cpu";
compatible = "qcom,kryo280";
reg = <0x0 0x3>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
next-level-cache = <&L2_0>;
};
CPU4: cpu@100 {
device_type = "cpu";
compatible = "qcom,kryo280";
reg = <0x0 0x100>;
enable-method = "psci";
capacity-dmips-mhz = <1536>;
cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-unified;
};
};
CPU5: cpu@101 {
device_type = "cpu";
compatible = "qcom,kryo280";
reg = <0x0 0x101>;
enable-method = "psci";
capacity-dmips-mhz = <1536>;
cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
next-level-cache = <&L2_1>;
};
CPU6: cpu@102 {
device_type = "cpu";
compatible = "qcom,kryo280";
reg = <0x0 0x102>;
enable-method = "psci";
capacity-dmips-mhz = <1536>;
cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
next-level-cache = <&L2_1>;
};
CPU7: cpu@103 {
device_type = "cpu";
compatible = "qcom,kryo280";
reg = <0x0 0x103>;
enable-method = "psci";
capacity-dmips-mhz = <1536>;
cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
next-level-cache = <&L2_1>;
};
cpu-map {
cluster0 {
core0 {
cpu = <&CPU0>;
};
core1 {
cpu = <&CPU1>;
};
core2 {
cpu = <&CPU2>;
};
core3 {
cpu = <&CPU3>;
};
};
cluster1 {
core0 {
cpu = <&CPU4>;
};
core1 {
cpu = <&CPU5>;
};
core2 {
cpu = <&CPU6>;
};
core3 {
cpu = <&CPU7>;
};
};
};
idle-states {
entry-method = "psci";
LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
compatible = "arm,idle-state";
idle-state-name = "little-retention";
/* CPU Retention (C2D), L2 Active */
arm,psci-suspend-param = <0x00000002>;
entry-latency-us = <81>;
exit-latency-us = <86>;
min-residency-us = <504>;
};
LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
compatible = "arm,idle-state";
idle-state-name = "little-power-collapse";
/* CPU + L2 Power Collapse (C3, D4) */
arm,psci-suspend-param = <0x40000003>;
entry-latency-us = <814>;
exit-latency-us = <4562>;
min-residency-us = <9183>;
local-timer-stop;
};
BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
compatible = "arm,idle-state";
idle-state-name = "big-retention";
/* CPU Retention (C2D), L2 Active */
arm,psci-suspend-param = <0x00000002>;
entry-latency-us = <79>;
exit-latency-us = <82>;
min-residency-us = <1302>;
};
BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
compatible = "arm,idle-state";
idle-state-name = "big-power-collapse";
/* CPU + L2 Power Collapse (C3, D4) */
arm,psci-suspend-param = <0x40000003>;
entry-latency-us = <724>;
exit-latency-us = <2027>;
min-residency-us = <9419>;
local-timer-stop;
};
};
};
firmware {
scm {
compatible = "qcom,scm-msm8998", "qcom,scm";
};
};
dsi_opp_table: opp-table-dsi {
compatible = "operating-points-v2";
opp-131250000 {
opp-hz = /bits/ 64 <131250000>;
required-opps = <&rpmpd_opp_low_svs>;
};
opp-210000000 {
opp-hz = /bits/ 64 <210000000>;
required-opps = <&rpmpd_opp_svs>;
};
opp-312500000 {
opp-hz = /bits/ 64 <312500000>;
required-opps = <&rpmpd_opp_nom>;
};
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
rpm: remoteproc {
compatible = "qcom,msm8998-rpm-proc", "qcom,rpm-proc";
glink-edge {
compatible = "qcom,glink-rpm";
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
mboxes = <&apcs_glb 0>;
rpm_requests: rpm-requests {
compatible = "qcom,rpm-msm8998";
qcom,glink-channels = "rpm_requests";
rpmcc: clock-controller {
compatible = "qcom,rpmcc-msm8998", "qcom,rpmcc";
clocks = <&xo>;
clock-names = "xo";
#clock-cells = <1>;
};
rpmpd: power-controller {
compatible = "qcom,msm8998-rpmpd";
#power-domain-cells = <1>;
operating-points-v2 = <&rpmpd_opp_table>;
rpmpd_opp_table: opp-table {
compatible = "operating-points-v2";
rpmpd_opp_ret: opp1 {
opp-level = <RPM_SMD_LEVEL_RETENTION>;
};
rpmpd_opp_ret_plus: opp2 {
opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
};
rpmpd_opp_min_svs: opp3 {
opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
};
rpmpd_opp_low_svs: opp4 {
opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
};
rpmpd_opp_svs: opp5 {
opp-level = <RPM_SMD_LEVEL_SVS>;
};
rpmpd_opp_svs_plus: opp6 {
opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
};
rpmpd_opp_nom: opp7 {
opp-level = <RPM_SMD_LEVEL_NOM>;
};
rpmpd_opp_nom_plus: opp8 {
opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
};
rpmpd_opp_turbo: opp9 {
opp-level = <RPM_SMD_LEVEL_TURBO>;
};
rpmpd_opp_turbo_plus: opp10 {
opp-level = <RPM_SMD_LEVEL_BINNING>;
};
};
};
};
};
};
smem {
compatible = "qcom,smem";
memory-region = <&smem_mem>;
hwlocks = <&tcsr_mutex 3>;
};
smp2p-lpass {
compatible = "qcom,smp2p";
qcom,smem = <443>, <429>;
interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apcs_glb 10>;
qcom,local-pid = <0>;
qcom,remote-pid = <2>;
adsp_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
adsp_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
smp2p-mpss {
compatible = "qcom,smp2p";
qcom,smem = <435>, <428>;
interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apcs_glb 14>;
qcom,local-pid = <0>;
qcom,remote-pid = <1>;
modem_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
modem_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
smp2p-slpi {
compatible = "qcom,smp2p";
qcom,smem = <481>, <430>;
interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apcs_glb 26>;
qcom,local-pid = <0>;
qcom,remote-pid = <3>;
slpi_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
slpi_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
thermal-zones {
cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 1>;
trips {
cpu0_alert0: trip-point0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu0_crit: cpu-crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
cpu1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 2>;
trips {
cpu1_alert0: trip-point0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu1_crit: cpu-crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
cpu2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 3>;
trips {
cpu2_alert0: trip-point0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu2_crit: cpu-crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
cpu3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 4>;
trips {
cpu3_alert0: trip-point0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu3_crit: cpu-crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
cpu4-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 7>;
trips {
cpu4_alert0: trip-point0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu4_crit: cpu-crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
cpu5-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 8>;
trips {
cpu5_alert0: trip-point0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu5_crit: cpu-crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
cpu6-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 9>;
trips {
cpu6_alert0: trip-point0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu6_crit: cpu-crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
cpu7-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 10>;
trips {
cpu7_alert0: trip-point0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu7_crit: cpu-crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
gpu-bottom-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 12>;
trips {
gpu1_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
gpu-top-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 13>;
trips {
gpu2_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
clust0-mhm-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 5>;
trips {
cluster0_mhm_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
clust1-mhm-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 6>;
trips {
cluster1_mhm_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
cluster1-l2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 11>;
trips {
cluster1_l2_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
modem-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 1>;
trips {
modem_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
mem-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 2>;
trips {
mem_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
wlan-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 3>;
trips {
wlan_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
q6-dsp-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 4>;
trips {
q6_dsp_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
camera-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 5>;
trips {
camera_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
multimedia-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens1 6>;
trips {
multimedia_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
};
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
};
soc: soc@0 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
gcc: clock-controller@100000 {
compatible = "qcom,gcc-msm8998";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
reg = <0x00100000 0xb0000>;
clock-names = "xo", "sleep_clk";
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
/*
* The hypervisor typically configures the memory region where these clocks
* reside as read-only for the HLOS. If the HLOS tried to enable or disable
* these clocks on a device with such configuration (e.g. because they are
* enabled but unused during boot-up), the device will most likely decide
* to reboot.
* In light of that, we are conservative here and we list all such clocks
* as protected. The board dts (or a user-supplied dts) can override the
* list of protected clocks if it differs from the norm, and it is in fact
* desired for the HLOS to manage these clocks
*/
protected-clocks = <AGGRE2_SNOC_NORTH_AXI>,
<SSC_XO>,
<SSC_CNOC_AHBS_CLK>;
};
rpm_msg_ram: sram@778000 {
compatible = "qcom,rpm-msg-ram";
reg = <0x00778000 0x7000>;
};
qfprom: qfprom@784000 {
compatible = "qcom,msm8998-qfprom", "qcom,qfprom";
reg = <0x00784000 0x621c>;
#address-cells = <1>;
#size-cells = <1>;
qusb2_hstx_trim: hstx-trim@23a {
reg = <0x23a 0x1>;
bits = <0 4>;
};
};
tsens0: thermal@10ab000 {
compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
reg = <0x010ab000 0x1000>, /* TM */
<0x010aa000 0x1000>; /* SROT */
#qcom,sensors = <14>;
interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};
tsens1: thermal@10ae000 {
compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
reg = <0x010ae000 0x1000>, /* TM */
<0x010ad000 0x1000>; /* SROT */
#qcom,sensors = <8>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow", "critical";
#thermal-sensor-cells = <1>;
};
anoc1_smmu: iommu@1680000 {
compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
reg = <0x01680000 0x10000>;
#iommu-cells = <1>;
#global-interrupts = <0>;
interrupts =
<GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 369 IRQ_TYPE_EDGE_RISING>;
};
anoc2_smmu: iommu@16c0000 {
compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
reg = <0x016c0000 0x40000>;
#iommu-cells = <1>;
#global-interrupts = <0>;
interrupts =
<GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 374 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 375 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 376 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 377 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 378 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 462 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 463 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 465 IRQ_TYPE_EDGE_RISING>;
};
pcie0: pcie@1c00000 {
compatible = "qcom,pcie-msm8998", "qcom,pcie-msm8996";
reg = <0x01c00000 0x2000>,
<0x1b000000 0xf1d>,
<0x1b000f20 0xa8>,
<0x1b100000 0x100000>;
reg-names = "parf", "dbi", "elbi", "config";
device_type = "pci";
linux,pci-domain = <0>;
bus-range = <0x00 0xff>;
#address-cells = <3>;
#size-cells = <2>;
num-lanes = <1>;
phys = <&pcie_phy>;
phy-names = "pciephy";
status = "disabled";
ranges = <0x01000000 0x0 0x00000000 0x1b200000 0x0 0x100000>,
<0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>;
#interrupt-cells = <1>;
interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 0 135 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 2 &intc 0 0 136 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 3 &intc 0 0 138 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &intc 0 0 139 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
<&gcc GCC_PCIE_0_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
<&gcc GCC_PCIE_0_SLV_AXI_CLK>;
clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave";
power-domains = <&gcc PCIE_0_GDSC>;
iommu-map = <0x100 &anoc1_smmu 0x1480 1>;
perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
};
pcie_phy: phy@1c06000 {
compatible = "qcom,msm8998-qmp-pcie-phy";
reg = <0x01c06000 0x1000>;
status = "disabled";
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&gcc GCC_PCIE_CLKREF_CLK>,
<&gcc GCC_PCIE_0_PIPE_CLK>;
clock-names = "aux",
"cfg_ahb",
"ref",
"pipe";
clock-output-names = "pcie_0_pipe_clk_src";
#clock-cells = <0>;
#phy-cells = <0>;
resets = <&gcc GCC_PCIE_0_PHY_BCR>, <&gcc GCC_PCIE_PHY_BCR>;
reset-names = "phy", "common";
vdda-phy-supply = <&vreg_l1a_0p875>;
vdda-pll-supply = <&vreg_l2a_1p2>;
};
ufshc: ufshc@1da4000 {
compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
reg = <0x01da4000 0x2500>;
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
phys = <&ufsphy>;
phy-names = "ufsphy";
lanes-per-direction = <2>;
power-domains = <&gcc UFS_GDSC>;
status = "disabled";
#reset-cells = <1>;
clock-names =
"core_clk",
"bus_aggr_clk",
"iface_clk",
"core_clk_unipro",
"ref_clk",
"tx_lane0_sync_clk",
"rx_lane0_sync_clk",
"rx_lane1_sync_clk";
clocks =
<&gcc GCC_UFS_AXI_CLK>,
<&gcc GCC_AGGRE1_UFS_AXI_CLK>,
<&gcc GCC_UFS_AHB_CLK>,
<&gcc GCC_UFS_UNIPRO_CORE_CLK>,
<&rpmcc RPM_SMD_LN_BB_CLK1>,
<&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
<&gcc GCC_UFS_RX_SYMBOL_0_CLK>,
<&gcc GCC_UFS_RX_SYMBOL_1_CLK>;
freq-table-hz =
<50000000 200000000>,
<0 0>,
<0 0>,
<37500000 150000000>,
<0 0>,
<0 0>,
<0 0>,
<0 0>;
resets = <&gcc GCC_UFS_BCR>;
reset-names = "rst";
};
ufsphy: phy@1da7000 {
compatible = "qcom,msm8998-qmp-ufs-phy";
reg = <0x01da7000 0x1000>;
clocks = <&rpmcc RPM_SMD_LN_BB_CLK1>,
<&gcc GCC_UFS_PHY_AUX_CLK>,
<&gcc GCC_UFS_CLKREF_CLK>;
clock-names = "ref",
"ref_aux",
"qref";
reset-names = "ufsphy";
resets = <&ufshc 0>;
#phy-cells = <0>;
status = "disabled";
};
tcsr_mutex: hwlock@1f40000 {
compatible = "qcom,tcsr-mutex";
reg = <0x01f40000 0x20000>;
#hwlock-cells = <1>;
};
tcsr_regs_1: syscon@1f60000 {
compatible = "qcom,msm8998-tcsr", "syscon";
reg = <0x01f60000 0x20000>;
};
tcsr_regs_2: syscon@1fc0000 {
compatible = "qcom,msm8998-tcsr", "syscon";
reg = <0x01fc0000 0x26000>;
};
tlmm: pinctrl@3400000 {
compatible = "qcom,msm8998-pinctrl";
reg = <0x03400000 0xc00000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-ranges = <&tlmm 0 0 150>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
sdc2_on: sdc2-on-state {
clk-pins {
pins = "sdc2_clk";
drive-strength = <16>;
bias-disable;
};
cmd-pins {
pins = "sdc2_cmd";
drive-strength = <10>;
bias-pull-up;
};
data-pins {
pins = "sdc2_data";
drive-strength = <10>;
bias-pull-up;
};
};
sdc2_off: sdc2-off-state {
clk-pins {
pins = "sdc2_clk";
drive-strength = <2>;
bias-disable;
};
cmd-pins {
pins = "sdc2_cmd";
drive-strength = <2>;
bias-pull-up;
};
data-pins {
pins = "sdc2_data";
drive-strength = <2>;
bias-pull-up;
};
};
sdc2_cd: sdc2-cd-state {
pins = "gpio95";
function = "gpio";
bias-pull-up;
drive-strength = <2>;
};
blsp1_uart3_on: blsp1-uart3-on-state {
tx-pins {
pins = "gpio45";
function = "blsp_uart3_a";
drive-strength = <2>;
bias-disable;
};
rx-pins {
pins = "gpio46";
function = "blsp_uart3_a";
drive-strength = <2>;
bias-disable;
};
cts-pins {
pins = "gpio47";
function = "blsp_uart3_a";
drive-strength = <2>;
bias-disable;
};
rfr-pins {
pins = "gpio48";
function = "blsp_uart3_a";
drive-strength = <2>;
bias-disable;
};
};
blsp1_i2c1_default: blsp1-i2c1-default-state {
pins = "gpio2", "gpio3";
function = "blsp_i2c1";
drive-strength = <2>;
bias-disable;
};
blsp1_i2c1_sleep: blsp1-i2c1-sleep-state-state {
pins = "gpio2", "gpio3";
function = "blsp_i2c1";
drive-strength = <2>;
bias-pull-up;
};
blsp1_i2c2_default: blsp1-i2c2-default-state {
pins = "gpio32", "gpio33";
function = "blsp_i2c2";
drive-strength = <2>;
bias-disable;
};
blsp1_i2c2_sleep: blsp1-i2c2-sleep-state-state {
pins = "gpio32", "gpio33";
function = "blsp_i2c2";
drive-strength = <2>;
bias-pull-up;
};
blsp1_i2c3_default: blsp1-i2c3-default-state {
pins = "gpio47", "gpio48";
function = "blsp_i2c3";
drive-strength = <2>;
bias-disable;
};
blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
pins = "gpio47", "gpio48";
function = "blsp_i2c3";
drive-strength = <2>;
bias-pull-up;
};
blsp1_i2c4_default: blsp1-i2c4-default-state {
pins = "gpio10", "gpio11";
function = "blsp_i2c4";
drive-strength = <2>;
bias-disable;
};
blsp1_i2c4_sleep: blsp1-i2c4-sleep-state {
pins = "gpio10", "gpio11";
function = "blsp_i2c4";
drive-strength = <2>;
bias-pull-up;
};
blsp1_i2c5_default: blsp1-i2c5-default-state {
pins = "gpio87", "gpio88";
function = "blsp_i2c5";
drive-strength = <2>;
bias-disable;
};
blsp1_i2c5_sleep: blsp1-i2c5-sleep-state {
pins = "gpio87", "gpio88";
function = "blsp_i2c5";
drive-strength = <2>;
bias-pull-up;
};
blsp1_i2c6_default: blsp1-i2c6-default-state {
pins = "gpio43", "gpio44";
function = "blsp_i2c6";
drive-strength = <2>;
bias-disable;
};
blsp1_i2c6_sleep: blsp1-i2c6-sleep-state {
pins = "gpio43", "gpio44";
function = "blsp_i2c6";
drive-strength = <2>;
bias-pull-up;
};
blsp1_spi_b_default: blsp1-spi-b-default-state {
pins = "gpio23", "gpio28";
function = "blsp1_spi_b";
drive-strength = <6>;
bias-disable;
};
blsp1_spi1_default: blsp1-spi1-default-state {
pins = "gpio0", "gpio1", "gpio2", "gpio3";
function = "blsp_spi1";
drive-strength = <6>;
bias-disable;
};
blsp1_spi2_default: blsp1-spi2-default-state {
pins = "gpio31", "gpio34", "gpio32", "gpio33";
function = "blsp_spi2";
drive-strength = <6>;
bias-disable;
};
blsp1_spi3_default: blsp1-spi3-default-state {
pins = "gpio45", "gpio46", "gpio47", "gpio48";
function = "blsp_spi2";
drive-strength = <6>;
bias-disable;
};
blsp1_spi4_default: blsp1-spi4-default-state {
pins = "gpio8", "gpio9", "gpio10", "gpio11";
function = "blsp_spi4";
drive-strength = <6>;
bias-disable;
};
blsp1_spi5_default: blsp1-spi5-default-state {
pins = "gpio85", "gpio86", "gpio87", "gpio88";
function = "blsp_spi5";
drive-strength = <6>;
bias-disable;
};
blsp1_spi6_default: blsp1-spi6-default-state {
pins = "gpio41", "gpio42", "gpio43", "gpio44";
function = "blsp_spi6";
drive-strength = <6>;
bias-disable;
};
/* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */
blsp2_i2c1_default: blsp2-i2c1-default-state {
pins = "gpio55", "gpio56";
function = "blsp_i2c7";
drive-strength = <2>;
bias-disable;
};
blsp2_i2c1_sleep: blsp2-i2c1-sleep-state {
pins = "gpio55", "gpio56";
function = "blsp_i2c7";
drive-strength = <2>;
bias-pull-up;
};
blsp2_i2c2_default: blsp2-i2c2-default-state {
pins = "gpio6", "gpio7";
function = "blsp_i2c8";
drive-strength = <2>;
bias-disable;
};
blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
pins = "gpio6", "gpio7";
function = "blsp_i2c8";
drive-strength = <2>;
bias-pull-up;
};
blsp2_i2c3_default: blsp2-i2c3-default-state {
pins = "gpio51", "gpio52";
function = "blsp_i2c9";
drive-strength = <2>;
bias-disable;
};
blsp2_i2c3_sleep: blsp2-i2c3-sleep-state {
pins = "gpio51", "gpio52";
function = "blsp_i2c9";
drive-strength = <2>;
bias-pull-up;
};
blsp2_i2c4_default: blsp2-i2c4-default-state {
pins = "gpio67", "gpio68";
function = "blsp_i2c10";
drive-strength = <2>;
bias-disable;
};
blsp2_i2c4_sleep: blsp2-i2c4-sleep-state {
pins = "gpio67", "gpio68";
function = "blsp_i2c10";
drive-strength = <2>;
bias-pull-up;
};
blsp2_i2c5_default: blsp2-i2c5-default-state {
pins = "gpio60", "gpio61";
function = "blsp_i2c11";
drive-strength = <2>;
bias-disable;
};
blsp2_i2c5_sleep: blsp2-i2c5-sleep-state {
pins = "gpio60", "gpio61";
function = "blsp_i2c11";
drive-strength = <2>;
bias-pull-up;
};
blsp2_i2c6_default: blsp2-i2c6-default-state {
pins = "gpio83", "gpio84";
function = "blsp_i2c12";
drive-strength = <2>;
bias-disable;
};
blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
pins = "gpio83", "gpio84";
function = "blsp_i2c12";
drive-strength = <2>;
bias-pull-up;
};
blsp2_spi1_default: blsp2-spi1-default-state {
pins = "gpio53", "gpio54", "gpio55", "gpio56";
function = "blsp_spi7";
drive-strength = <6>;
bias-disable;
};
blsp2_spi2_default: blsp2-spi2-default-state {
pins = "gpio4", "gpio5", "gpio6", "gpio7";
function = "blsp_spi8";
drive-strength = <6>;
bias-disable;
};
blsp2_spi3_default: blsp2-spi3-default-state {
pins = "gpio49", "gpio50", "gpio51", "gpio52";
function = "blsp_spi9";
drive-strength = <6>;
bias-disable;
};
blsp2_spi4_default: blsp2-spi4-default-state {
pins = "gpio65", "gpio66", "gpio67", "gpio68";
function = "blsp_spi10";
drive-strength = <6>;
bias-disable;
};
blsp2_spi5_default: blsp2-spi5-default-state {
pins = "gpio58", "gpio59", "gpio60", "gpio61";
function = "blsp_spi11";
drive-strength = <6>;
bias-disable;
};
blsp2_spi6_default: blsp2-spi6-default-state {
pins = "gpio81", "gpio82", "gpio83", "gpio84";
function = "blsp_spi12";
drive-strength = <6>;
bias-disable;
};
};
remoteproc_mss: remoteproc@4080000 {
compatible = "qcom,msm8998-mss-pil";
reg = <0x04080000 0x100>, <0x04180000 0x20>;
reg-names = "qdsp6", "rmb";
interrupts-extended =
<&intc GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack",
"shutdown-ack";
clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
<&gcc GCC_BIMC_MSS_Q6_AXI_CLK>,
<&gcc GCC_BOOT_ROM_AHB_CLK>,
<&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>,
<&gcc GCC_MSS_SNOC_AXI_CLK>,
<&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
<&rpmcc RPM_SMD_QDSS_CLK>,
<&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface", "bus", "mem", "gpll0_mss",
"snoc_axi", "mnoc_axi", "qdss", "xo";
qcom,smem-states = <&modem_smp2p_out 0>;
qcom,smem-state-names = "stop";
resets = <&gcc GCC_MSS_RESTART>;
reset-names = "mss_restart";
qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>;
power-domains = <&rpmpd MSM8998_VDDCX>,
<&rpmpd MSM8998_VDDMX>;
power-domain-names = "cx", "mx";
status = "disabled";
mba {
memory-region = <&mba_mem>;
};
mpss {
memory-region = <&mpss_mem>;
};
metadata {
memory-region = <&mdata_mem>;
};
glink-edge {
interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>;
label = "modem";
qcom,remote-pid = <1>;
mboxes = <&apcs_glb 15>;
};
};
adreno_gpu: gpu@5000000 {
compatible = "qcom,adreno-540.1", "qcom,adreno";
reg = <0x05000000 0x40000>;
reg-names = "kgsl_3d0_reg_memory";
clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
<&gpucc RBBMTIMER_CLK>,
<&gcc GCC_BIMC_GFX_CLK>,
<&gcc GCC_GPU_BIMC_GFX_CLK>,
<&gpucc RBCPR_CLK>,
<&gpucc GFX3D_CLK>;
clock-names = "iface",
"rbbmtimer",
"mem",
"mem_iface",
"rbcpr",
"core";
interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&adreno_smmu 0>;
operating-points-v2 = <&gpu_opp_table>;
power-domains = <&rpmpd MSM8998_VDDMX>;
status = "disabled";
gpu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-710000097 {
opp-hz = /bits/ 64 <710000097>;
opp-level = <RPM_SMD_LEVEL_TURBO>;
opp-supported-hw = <0xff>;
};
opp-670000048 {
opp-hz = /bits/ 64 <670000048>;
opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
opp-supported-hw = <0xff>;
};
opp-596000097 {
opp-hz = /bits/ 64 <596000097>;
opp-level = <RPM_SMD_LEVEL_NOM>;
opp-supported-hw = <0xff>;
};
opp-515000097 {
opp-hz = /bits/ 64 <515000097>;
opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
opp-supported-hw = <0xff>;
};
opp-414000000 {
opp-hz = /bits/ 64 <414000000>;
opp-level = <RPM_SMD_LEVEL_SVS>;
opp-supported-hw = <0xff>;
};
opp-342000000 {
opp-hz = /bits/ 64 <342000000>;
opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
opp-supported-hw = <0xff>;
};
opp-257000000 {
opp-hz = /bits/ 64 <257000000>;
opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
opp-supported-hw = <0xff>;
};
};
};
adreno_smmu: iommu@5040000 {
compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
reg = <0x05040000 0x10000>;
clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
<&gcc GCC_BIMC_GFX_CLK>,
<&gcc GCC_GPU_BIMC_GFX_CLK>;
clock-names = "iface", "mem", "mem_iface";
#global-interrupts = <0>;
#iommu-cells = <1>;
interrupts =
<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
/*
* GPU-GX GDSC's parent is GPU-CX. We need to bring up the
* GPU-CX for SMMU but we need both of them up for Adreno.
* Contemporarily, we also need to manage the VDDMX rpmpd
* domain in the Adreno driver.
* Enable GPU CX/GX GDSCs here so that we can manage the
* SoC VDDMX RPM Power Domain in the Adreno driver.
*/
power-domains = <&gpucc GPU_GX_GDSC>;
status = "disabled";
};
gpucc: clock-controller@5065000 {
compatible = "qcom,msm8998-gpucc";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
reg = <0x05065000 0x9000>;
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
<&gcc GCC_GPU_GPLL0_CLK>;
clock-names = "xo",
"gpll0";
};
remoteproc_slpi: remoteproc@5800000 {
compatible = "qcom,msm8998-slpi-pas";
reg = <0x05800000 0x4040>;
interrupts-extended = <&intc GIC_SPI 390 IRQ_TYPE_EDGE_RISING>,
<&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
<&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
px-supply = <&vreg_lvs2a_1p8>;
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "xo";
memory-region = <&slpi_mem>;
qcom,smem-states = <&slpi_smp2p_out 0>;
qcom,smem-state-names = "stop";
power-domains = <&rpmpd MSM8998_SSCCX>;
power-domain-names = "ssc_cx";
status = "disabled";
glink-edge {
interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
label = "dsps";
qcom,remote-pid = <3>;
mboxes = <&apcs_glb 27>;
};
};
stm: stm@6002000 {
compatible = "arm,coresight-stm", "arm,primecell";
reg = <0x06002000 0x1000>,
<0x16280000 0x180000>;
reg-names = "stm-base", "stm-stimulus-base";
status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
out-ports {
port {
stm_out: endpoint {
remote-endpoint = <&funnel0_in7>;
};
};
};
};
funnel1: funnel@6041000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0x06041000 0x1000>;
status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
out-ports {
port {
funnel0_out: endpoint {
remote-endpoint =
<&merge_funnel_in0>;
};
};
};
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@7 {
reg = <7>;
funnel0_in7: endpoint {
remote-endpoint = <&stm_out>;
};
};
};
};
funnel2: funnel@6042000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0x06042000 0x1000>;
status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
out-ports {
port {
funnel1_out: endpoint {
remote-endpoint =
<&merge_funnel_in1>;
};
};
};
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@6 {
reg = <6>;
funnel1_in6: endpoint {
remote-endpoint =
<&apss_merge_funnel_out>;
};
};
};
};
funnel3: funnel@6045000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0x06045000 0x1000>;
status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
out-ports {
port {
merge_funnel_out: endpoint {
remote-endpoint =
<&etf_in>;
};
};
};
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
merge_funnel_in0: endpoint {
remote-endpoint =
<&funnel0_out>;
};
};
port@1 {
reg = <1>;
merge_funnel_in1: endpoint {
remote-endpoint =
<&funnel1_out>;
};
};
};
};
replicator1: replicator@6046000 {
compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
reg = <0x06046000 0x1000>;
status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
out-ports {
port {
replicator_out: endpoint {
remote-endpoint = <&etr_in>;
};
};
};
in-ports {
port {
replicator_in: endpoint {
remote-endpoint = <&etf_out>;
};
};
};
};
etf: etf@6047000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0x06047000 0x1000>;
status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
out-ports {
port {
etf_out: endpoint {
remote-endpoint =
<&replicator_in>;
};
};
};
in-ports {
port {
etf_in: endpoint {
remote-endpoint =
<&merge_funnel_out>;
};
};
};
};
etr: etr@6048000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0x06048000 0x1000>;
status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
arm,scatter-gather;
in-ports {
port {
etr_in: endpoint {
remote-endpoint =
<&replicator_out>;
};
};
};
};
etm1: etm@7840000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0x07840000 0x1000>;
status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
cpu = <&CPU0>;
out-ports {
port {
etm0_out: endpoint {
remote-endpoint =
<&apss_funnel_in0>;
};
};
};
};
etm2: etm@7940000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0x07940000 0x1000>;
status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
cpu = <&CPU1>;
out-ports {
port {
etm1_out: endpoint {
remote-endpoint =
<&apss_funnel_in1>;
};
};
};
};
etm3: etm@7a40000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0x07a40000 0x1000>;
status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
cpu = <&CPU2>;
out-ports {
port {
etm2_out: endpoint {
remote-endpoint =
<&apss_funnel_in2>;
};
};
};
};
etm4: etm@7b40000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0x07b40000 0x1000>;
status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
cpu = <&CPU3>;
out-ports {
port {
etm3_out: endpoint {
remote-endpoint =
<&apss_funnel_in3>;
};
};
};
};
funnel4: funnel@7b60000 { /* APSS Funnel */
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0x07b60000 0x1000>;
status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
out-ports {
port {
apss_funnel_out: endpoint {
remote-endpoint =
<&apss_merge_funnel_in>;
};
};
};
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
apss_funnel_in0: endpoint {
remote-endpoint =
<&etm0_out>;
};
};
port@1 {
reg = <1>;
apss_funnel_in1: endpoint {
remote-endpoint =
<&etm1_out>;
};
};
port@2 {
reg = <2>;
apss_funnel_in2: endpoint {
remote-endpoint =
<&etm2_out>;
};
};
port@3 {
reg = <3>;
apss_funnel_in3: endpoint {
remote-endpoint =
<&etm3_out>;
};
};
port@4 {
reg = <4>;
apss_funnel_in4: endpoint {
remote-endpoint =
<&etm4_out>;
};
};
port@5 {
reg = <5>;
apss_funnel_in5: endpoint {
remote-endpoint =
<&etm5_out>;
};
};
port@6 {
reg = <6>;
apss_funnel_in6: endpoint {
remote-endpoint =
<&etm6_out>;
};
};
port@7 {
reg = <7>;
apss_funnel_in7: endpoint {
remote-endpoint =
<&etm7_out>;
};
};
};
};
funnel5: funnel@7b70000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0x07b70000 0x1000>;
status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
out-ports {
port {
apss_merge_funnel_out: endpoint {
remote-endpoint =
<&funnel1_in6>;
};
};
};
in-ports {
port {
apss_merge_funnel_in: endpoint {
remote-endpoint =
<&apss_funnel_out>;
};
};
};
};
etm5: etm@7c40000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0x07c40000 0x1000>;
status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
cpu = <&CPU4>;
out-ports {
port {
etm4_out: endpoint {
remote-endpoint = <&apss_funnel_in4>;
};
};
};
};
etm6: etm@7d40000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0x07d40000 0x1000>;
status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
cpu = <&CPU5>;
out-ports {
port {
etm5_out: endpoint {
remote-endpoint = <&apss_funnel_in5>;
};
};
};
};
etm7: etm@7e40000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0x07e40000 0x1000>;
status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
cpu = <&CPU6>;
out-ports {
port {
etm6_out: endpoint {
remote-endpoint = <&apss_funnel_in6>;
};
};
};
};
etm8: etm@7f40000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0x07f40000 0x1000>;
status = "disabled";
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
cpu = <&CPU7>;
out-ports {
port {
etm7_out: endpoint {
remote-endpoint = <&apss_funnel_in7>;
};
};
};
};
sram@290000 {
compatible = "qcom,rpm-stats";
reg = <0x00290000 0x10000>;
};
spmi_bus: spmi@800f000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0x0800f000 0x1000>,
<0x08400000 0x1000000>,
<0x09400000 0x1000000>,
<0x0a400000 0x220000>,
<0x0800a000 0x3000>;
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
interrupt-names = "periph_irq";
interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <2>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
};
usb3: usb@a8f8800 {
compatible = "qcom,msm8998-dwc3", "qcom,dwc3";
reg = <0x0a8f8800 0x400>;
status = "disabled";
#address-cells = <1>;
#size-cells = <1>;
ranges;
clocks = <&gcc GCC_CFG_NOC_USB3_AXI_CLK>,
<&gcc GCC_USB30_MASTER_CLK>,
<&gcc GCC_AGGRE1_USB3_AXI_CLK>,
<&gcc GCC_USB30_SLEEP_CLK>,
<&gcc GCC_USB30_MOCK_UTMI_CLK>;
clock-names = "cfg_noc",
"core",
"iface",
"sleep",
"mock_utmi";
assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_MASTER_CLK>;
assigned-clock-rates = <19200000>, <120000000>;
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "pwr_event",
"qusb2_phy",
"ss_phy_irq";
power-domains = <&gcc USB_30_GDSC>;
resets = <&gcc GCC_USB_30_BCR>;
usb3_dwc3: usb@a800000 {
compatible = "snps,dwc3";
reg = <0x0a800000 0xcd00>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
phys = <&qusb2phy>, <&usb3phy>;
phy-names = "usb2-phy", "usb3-phy";
snps,has-lpm-erratum;
snps,hird-threshold = /bits/ 8 <0x10>;
};
};
usb3phy: phy@c010000 {
compatible = "qcom,msm8998-qmp-usb3-phy";
reg = <0x0c010000 0x1000>;
clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
<&gcc GCC_USB3_CLKREF_CLK>,
<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
<&gcc GCC_USB3_PHY_PIPE_CLK>;
clock-names = "aux",
"ref",
"cfg_ahb",
"pipe";
clock-output-names = "usb3_phy_pipe_clk_src";
#clock-cells = <0>;
#phy-cells = <0>;
resets = <&gcc GCC_USB3_PHY_BCR>,
<&gcc GCC_USB3PHY_PHY_BCR>;
reset-names = "phy",
"phy_phy";
qcom,tcsr-reg = <&tcsr_regs_2 0xb244>;
status = "disabled";
};
qusb2phy: phy@c012000 {
compatible = "qcom,msm8998-qusb2-phy";
reg = <0x0c012000 0x2a8>;
status = "disabled";
#phy-cells = <0>;
clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
<&gcc GCC_RX1_USB2_CLKREF_CLK>;
clock-names = "cfg_ahb", "ref";
resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
nvmem-cells = <&qusb2_hstx_trim>;
};
sdhc2: mmc@c0a4900 {
compatible = "qcom,msm8998-sdhci", "qcom,sdhci-msm-v4";
reg = <0x0c0a4900 0x314>, <0x0c0a4000 0x800>;
reg-names = "hc", "core";
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clock-names = "iface", "core", "xo";
clocks = <&gcc GCC_SDCC2_AHB_CLK>,
<&gcc GCC_SDCC2_APPS_CLK>,
<&rpmcc RPM_SMD_XO_CLK_SRC>;
bus-width = <4>;
status = "disabled";
};
blsp1_dma: dma-controller@c144000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x0c144000 0x25000>;
interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
qcom,controlled-remotely;
num-channels = <18>;
qcom,num-ees = <4>;
};
blsp1_uart3: serial@c171000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x0c171000 0x1000>;
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_uart3_on>;
status = "disabled";
};
blsp1_i2c1: i2c@c175000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c175000 0x600>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp1_i2c1_default>;
pinctrl-1 = <&blsp1_i2c1_sleep>;
clock-frequency = <400000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
blsp1_i2c2: i2c@c176000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c176000 0x600>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp1_i2c2_default>;
pinctrl-1 = <&blsp1_i2c2_sleep>;
clock-frequency = <400000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
blsp1_i2c3: i2c@c177000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c177000 0x600>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp1_i2c3_default>;
pinctrl-1 = <&blsp1_i2c3_sleep>;
clock-frequency = <400000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
blsp1_i2c4: i2c@c178000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c178000 0x600>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp1_i2c4_default>;
pinctrl-1 = <&blsp1_i2c4_sleep>;
clock-frequency = <400000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
blsp1_i2c5: i2c@c179000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c179000 0x600>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp1_dma 14>, <&blsp1_dma 15>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp1_i2c5_default>;
pinctrl-1 = <&blsp1_i2c5_sleep>;
clock-frequency = <400000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
blsp1_i2c6: i2c@c17a000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c17a000 0x600>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp1_dma 16>, <&blsp1_dma 17>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp1_i2c6_default>;
pinctrl-1 = <&blsp1_i2c6_sleep>;
clock-frequency = <400000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
blsp1_spi1: spi@c175000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x0c175000 0x600>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_spi1_default>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
blsp1_spi2: spi@c176000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x0c176000 0x600>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_spi2_default>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
blsp1_spi3: spi@c177000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x0c177000 0x600>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_spi3_default>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
blsp1_spi4: spi@c178000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x0c178000 0x600>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_spi4_default>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
blsp1_spi5: spi@c179000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x0c179000 0x600>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp1_dma 14>, <&blsp1_dma 15>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_spi5_default>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
blsp1_spi6: spi@c17a000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x0c17a000 0x600>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp1_dma 16>, <&blsp1_dma 17>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_spi6_default>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
blsp2_dma: dma-controller@c184000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x0c184000 0x25000>;
interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
qcom,controlled-remotely;
num-channels = <18>;
qcom,num-ees = <4>;
};
blsp2_uart1: serial@c1b0000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x0c1b0000 0x1000>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
blsp2_i2c1: i2c@c1b5000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c1b5000 0x600>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_i2c1_default>;
pinctrl-1 = <&blsp2_i2c1_sleep>;
clock-frequency = <400000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
blsp2_i2c2: i2c@c1b6000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c1b6000 0x600>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp2_dma 8>, <&blsp2_dma 9>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_i2c2_default>;
pinctrl-1 = <&blsp2_i2c2_sleep>;
clock-frequency = <400000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
blsp2_i2c3: i2c@c1b7000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c1b7000 0x600>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_i2c3_default>;
pinctrl-1 = <&blsp2_i2c3_sleep>;
clock-frequency = <400000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
blsp2_i2c4: i2c@c1b8000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c1b8000 0x600>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_i2c4_default>;
pinctrl-1 = <&blsp2_i2c4_sleep>;
clock-frequency = <400000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
blsp2_i2c5: i2c@c1b9000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c1b9000 0x600>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp2_dma 14>, <&blsp2_dma 15>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_i2c5_default>;
pinctrl-1 = <&blsp2_i2c5_sleep>;
clock-frequency = <400000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
blsp2_i2c6: i2c@c1ba000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x0c1ba000 0x600>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp2_dma 16>, <&blsp2_dma 17>;
dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_i2c6_default>;
pinctrl-1 = <&blsp2_i2c6_sleep>;
clock-frequency = <400000>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
blsp2_spi1: spi@c1b5000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x0c1b5000 0x600>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP1_SPI_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&blsp2_spi1_default>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
blsp2_spi2: spi@c1b6000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x0c1b6000 0x600>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp2_dma 8>, <&blsp2_dma 9>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&blsp2_spi2_default>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
blsp2_spi3: spi@c1b7000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x0c1b7000 0x600>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP3_SPI_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&blsp2_spi3_default>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
blsp2_spi4: spi@c1b8000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x0c1b8000 0x600>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP4_SPI_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&blsp2_spi4_default>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
blsp2_spi5: spi@c1b9000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x0c1b9000 0x600>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP5_SPI_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp2_dma 14>, <&blsp2_dma 15>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&blsp2_spi5_default>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
blsp2_spi6: spi@c1ba000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x0c1ba000 0x600>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP6_SPI_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp2_dma 16>, <&blsp2_dma 17>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&blsp2_spi6_default>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmcc: clock-controller@c8c0000 {
compatible = "qcom,mmcc-msm8998";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
reg = <0xc8c0000 0x40000>;
clock-names = "xo",
"gpll0",
"dsi0dsi",
"dsi0byte",
"dsi1dsi",
"dsi1byte",
"hdmipll",
"dplink",
"dpvco",
"gpll0_div";
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
<&gcc GCC_MMSS_GPLL0_CLK>,
<&mdss_dsi0_phy 1>,
<&mdss_dsi0_phy 0>,
<&mdss_dsi1_phy 1>,
<&mdss_dsi1_phy 0>,
<0>,
<0>,
<0>,
<&gcc GCC_MMSS_GPLL0_DIV_CLK>;
};
mdss: display-subsystem@c900000 {
compatible = "qcom,msm8998-mdss";
reg = <0x0c900000 0x1000>;
reg-names = "mdss";
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
clocks = <&mmcc MDSS_AHB_CLK>,
<&mmcc MDSS_AXI_CLK>,
<&mmcc MDSS_MDP_CLK>;
clock-names = "iface",
"bus",
"core";
power-domains = <&mmcc MDSS_GDSC>;
iommus = <&mmss_smmu 0>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
status = "disabled";
mdss_mdp: display-controller@c901000 {
compatible = "qcom,msm8998-dpu";
reg = <0x0c901000 0x8f000>,
<0x0c9a8e00 0xf0>,
<0x0c9b0000 0x2008>,
<0x0c9b8000 0x1040>;
reg-names = "mdp",
"regdma",
"vbif",
"vbif_nrt";
interrupt-parent = <&mdss>;
interrupts = <0>;
clocks = <&mmcc MDSS_AHB_CLK>,
<&mmcc MDSS_AXI_CLK>,
<&mmcc MNOC_AHB_CLK>,
<&mmcc MDSS_MDP_CLK>,
<&mmcc MDSS_VSYNC_CLK>;
clock-names = "iface",
"bus",
"mnoc",
"core",
"vsync";
assigned-clocks = <&mmcc MDSS_VSYNC_CLK>;
assigned-clock-rates = <19200000>;
operating-points-v2 = <&mdp_opp_table>;
power-domains = <&rpmpd MSM8998_VDDMX>;
mdp_opp_table: opp-table {
compatible = "operating-points-v2";
opp-171430000 {
opp-hz = /bits/ 64 <171430000>;
required-opps = <&rpmpd_opp_low_svs>;
};
opp-275000000 {
opp-hz = /bits/ 64 <275000000>;
required-opps = <&rpmpd_opp_svs>;
};
opp-330000000 {
opp-hz = /bits/ 64 <330000000>;
required-opps = <&rpmpd_opp_nom>;
};
opp-412500000 {
opp-hz = /bits/ 64 <412500000>;
required-opps = <&rpmpd_opp_turbo>;
};
};
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dpu_intf1_out: endpoint {
remote-endpoint = <&mdss_dsi0_in>;
};
};
port@1 {
reg = <1>;
dpu_intf2_out: endpoint {
remote-endpoint = <&mdss_dsi1_in>;
};
};
};
};
mdss_dsi0: dsi@c994000 {
compatible = "qcom,msm8998-dsi-ctrl", "qcom,mdss-dsi-ctrl";
reg = <0x0c994000 0x400>;
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
interrupts = <4>;
clocks = <&mmcc MDSS_BYTE0_CLK>,
<&mmcc MDSS_BYTE0_INTF_CLK>,
<&mmcc MDSS_PCLK0_CLK>,
<&mmcc MDSS_ESC0_CLK>,
<&mmcc MDSS_AHB_CLK>,
<&mmcc MDSS_AXI_CLK>;
clock-names = "byte",
"byte_intf",
"pixel",
"core",
"iface",
"bus";
assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
<&mmcc PCLK0_CLK_SRC>;
assigned-clock-parents = <&mdss_dsi0_phy 0>,
<&mdss_dsi0_phy 1>;
operating-points-v2 = <&dsi_opp_table>;
power-domains = <&rpmpd MSM8998_VDDCX>;
phys = <&mdss_dsi0_phy>;
phy-names = "dsi";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mdss_dsi0_in: endpoint {
remote-endpoint = <&dpu_intf1_out>;
};
};
port@1 {
reg = <1>;
mdss_dsi0_out: endpoint {
};
};
};
};
mdss_dsi0_phy: phy@c994400 {
compatible = "qcom,dsi-phy-10nm-8998";
reg = <0x0c994400 0x200>,
<0x0c994600 0x280>,
<0x0c994a00 0x1e0>;
reg-names = "dsi_phy",
"dsi_phy_lane",
"dsi_pll";
clocks = <&mmcc MDSS_AHB_CLK>,
<&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface", "ref";
#clock-cells = <1>;
#phy-cells = <0>;
status = "disabled";
};
mdss_dsi1: dsi@c996000 {
compatible = "qcom,msm8998-dsi-ctrl", "qcom,mdss-dsi-ctrl";
reg = <0x0c996000 0x400>;
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
interrupts = <5>;
clocks = <&mmcc MDSS_BYTE1_CLK>,
<&mmcc MDSS_BYTE1_INTF_CLK>,
<&mmcc MDSS_PCLK1_CLK>,
<&mmcc MDSS_ESC1_CLK>,
<&mmcc MDSS_AHB_CLK>,
<&mmcc MDSS_AXI_CLK>;
clock-names = "byte",
"byte_intf",
"pixel",
"core",
"iface",
"bus";
assigned-clocks = <&mmcc BYTE1_CLK_SRC>,
<&mmcc PCLK1_CLK_SRC>;
assigned-clock-parents = <&mdss_dsi1_phy 0>,
<&mdss_dsi1_phy 1>;
operating-points-v2 = <&dsi_opp_table>;
power-domains = <&rpmpd MSM8998_VDDCX>;
phys = <&mdss_dsi1_phy>;
phy-names = "dsi";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mdss_dsi1_in: endpoint {
remote-endpoint = <&dpu_intf2_out>;
};
};
port@1 {
reg = <1>;
mdss_dsi1_out: endpoint {
};
};
};
};
mdss_dsi1_phy: phy@c996400 {
compatible = "qcom,dsi-phy-10nm-8998";
reg = <0x0c996400 0x200>,
<0x0c996600 0x280>,
<0x0c996a00 0x10e>;
reg-names = "dsi_phy",
"dsi_phy_lane",
"dsi_pll";
clocks = <&mmcc MDSS_AHB_CLK>,
<&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface",
"ref";
#clock-cells = <1>;
#phy-cells = <0>;
status = "disabled";
};
};
mmss_smmu: iommu@cd00000 {
compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
reg = <0x0cd00000 0x40000>;
#iommu-cells = <1>;
clocks = <&mmcc MNOC_AHB_CLK>,
<&mmcc BIMC_SMMU_AHB_CLK>,
<&mmcc BIMC_SMMU_AXI_CLK>;
clock-names = "iface-mm",
"iface-smmu",
"bus-smmu";
#global-interrupts = <0>;
interrupts =
<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&mmcc BIMC_SMMU_GDSC>;
};
remoteproc_adsp: remoteproc@17300000 {
compatible = "qcom,msm8998-adsp-pas";
reg = <0x17300000 0x4040>;
interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "xo";
memory-region = <&adsp_mem>;
qcom,smem-states = <&adsp_smp2p_out 0>;
qcom,smem-state-names = "stop";
power-domains = <&rpmpd MSM8998_VDDCX>;
power-domain-names = "cx";
status = "disabled";
glink-edge {
interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
label = "lpass";
qcom,remote-pid = <2>;
mboxes = <&apcs_glb 9>;
};
};
apcs_glb: mailbox@17911000 {
compatible = "qcom,msm8998-apcs-hmss-global",
"qcom,msm8994-apcs-kpss-global";
reg = <0x17911000 0x1000>;
#mbox-cells = <1>;
};
timer@17920000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "arm,armv7-timer-mem";
reg = <0x17920000 0x1000>;
frame@17921000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17921000 0x1000>,
<0x17922000 0x1000>;
};
frame@17923000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17923000 0x1000>;
status = "disabled";
};
frame@17924000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17924000 0x1000>;
status = "disabled";
};
frame@17925000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17925000 0x1000>;
status = "disabled";
};
frame@17926000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17926000 0x1000>;
status = "disabled";
};
frame@17927000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17927000 0x1000>;
status = "disabled";
};
frame@17928000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17928000 0x1000>;
status = "disabled";
};
};
intc: interrupt-controller@17a00000 {
compatible = "arm,gic-v3";
reg = <0x17a00000 0x10000>, /* GICD */
<0x17b00000 0x100000>; /* GICR * 8 */
#interrupt-cells = <3>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
interrupt-controller;
#redistributor-regions = <1>;
redistributor-stride = <0x0 0x20000>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
wifi: wifi@18800000 {
compatible = "qcom,wcn3990-wifi";
status = "disabled";
reg = <0x18800000 0x800000>;
reg-names = "membase";
memory-region = <&wlan_msa_mem>;
clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>;
clock-names = "cxo_ref_clk_pin";
interrupts =
<GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&anoc2_smmu 0x1900>,
<&anoc2_smmu 0x1901>;
qcom,snoc-host-cap-8bit-quirk;
};
};
};