| // SPDX-License-Identifier: GPL-2.0 |
| // Copyright (c) 2019, AngeloGioacchino Del Regno <kholk11@gmail.com> |
| |
| #include <dt-bindings/iio/qcom,spmi-vadc.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/spmi/spmi.h> |
| |
| &spmi_bus { |
| pmic@2 { |
| compatible = "qcom,pmi8950", "qcom,spmi-pmic"; |
| reg = <0x2 SPMI_USID>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pmi8950_vadc: adc@3100 { |
| compatible = "qcom,spmi-vadc"; |
| reg = <0x3100>; |
| interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #io-channel-cells = <1>; |
| |
| channel@0 { |
| reg = <VADC_USBIN>; |
| qcom,pre-scaling = <1 4>; |
| label = "usbin"; |
| }; |
| |
| channel@1 { |
| reg = <VADC_DCIN>; |
| qcom,pre-scaling = <1 4>; |
| label = "dcin"; |
| }; |
| |
| channel@2 { |
| reg = <VADC_VCHG_SNS>; |
| qcom,pre-scaling = <1 1>; |
| label = "vchg_sns"; |
| }; |
| |
| channel@9 { |
| reg = <VADC_REF_625MV>; |
| qcom,pre-scaling = <1 1>; |
| label = "ref_625mv"; |
| }; |
| |
| channel@a { |
| reg = <VADC_REF_1250MV>; |
| qcom,pre-scaling = <1 1>; |
| label = "ref_1250mv"; |
| }; |
| |
| channel@d { |
| reg = <VADC_SPARE2>; |
| qcom,pre-scaling = <1 1>; |
| label = "chg_temp"; |
| }; |
| }; |
| |
| pmi8950_mpps: mpps@a000 { |
| compatible = "qcom,pmi8950-mpp", "qcom,spmi-mpp"; |
| reg = <0xa000>; |
| gpio-controller; |
| gpio-ranges = <&pmi8950_mpps 0 0 4>; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| pmi8950_gpios: gpio@c000 { |
| compatible = "qcom,pmi8950-gpio", "qcom,spmi-gpio"; |
| reg = <0xc000>; |
| gpio-controller; |
| gpio-ranges = <&pmi8950_gpios 0 0 2>; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| pmic@3 { |
| compatible = "qcom,pmi8950", "qcom,spmi-pmic"; |
| reg = <0x3 SPMI_USID>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pmi8950_wled: leds@d800 { |
| compatible = "qcom,pmi8950-wled"; |
| reg = <0xd800>, <0xd900>; |
| interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>, |
| <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "ovp", "short"; |
| label = "backlight"; |
| |
| status = "disabled"; |
| }; |
| }; |
| }; |
