| // SPDX-License-Identifier: BSD-3-Clause |
| /* |
| * Copyright (c) 2021, Martin Botka <martin.botka@somainline.org> |
| */ |
| |
| /dts-v1/; |
| |
| #include "sm6125.dtsi" |
| #include "pm6125.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/gpio-keys.h> |
| #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> |
| |
| / { |
| /* required for bootloader to select correct board */ |
| qcom,msm-id = <394 0x10000>; /* sm6125 v1 */ |
| qcom,board-id = <34 0>; |
| |
| model = "Sony Xperia 10 II"; |
| compatible = "sony,pdx201", "qcom,sm6125"; |
| chassis-type = "handset"; |
| |
| aliases { |
| mmc0 = &sdhc_1; /* SDC1 eMMC slot */ |
| mmc1 = &sdhc_2; /* SDC2 SD card slot */ |
| }; |
| |
| chosen { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| framebuffer0: framebuffer@5c000000 { |
| compatible = "simple-framebuffer"; |
| reg = <0 0x5c000000 0 (2520 * 1080 * 4)>; |
| width = <1080>; |
| height = <2520>; |
| stride = <(1080 * 4)>; |
| format = "a8r8g8b8"; |
| }; |
| }; |
| |
| extcon_usb: extcon-usb { |
| compatible = "linux,extcon-usb-gpio"; |
| id-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| |
| pinctrl-0 = <&vol_down_n>; |
| pinctrl-names = "default"; |
| |
| key-volume-down { |
| label = "Volume Down"; |
| gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_VOLUMEDOWN>; |
| debounce-interval = <15>; |
| linux,can-disable; |
| wakeup-source; |
| }; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| debug_mem: memory@ffb00000 { |
| reg = <0x0 0xffb00000 0x0 0xc0000>; |
| no-map; |
| }; |
| |
| last_log_mem: memory@ffbc0000 { |
| reg = <0x0 0xffbc0000 0x0 0x80000>; |
| no-map; |
| }; |
| |
| pstore_mem: ramoops@ffc00000 { |
| compatible = "ramoops"; |
| reg = <0x0 0xffc40000 0x0 0xc0000>; |
| record-size = <0x1000>; |
| console-size = <0x40000>; |
| pmsg-size = <0x20000>; |
| }; |
| |
| cmdline_mem: memory@ffd00000 { |
| reg = <0x0 0xffd40000 0x0 0x1000>; |
| no-map; |
| }; |
| }; |
| |
| thermal-zones { |
| rf-pa0-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&pm6125_adc_tm 0>; |
| |
| trips { |
| active-config0 { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| quiet-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <5000>; |
| thermal-sensors = <&pm6125_adc_tm 1>; |
| |
| trips { |
| active-config0 { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| xo-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&pm6125_adc_tm 2>; |
| |
| trips { |
| active-config0 { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| rf-pa1-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&pm6125_adc_tm 3>; |
| |
| trips { |
| active-config0 { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| &gpi_dma0 { |
| status = "okay"; |
| }; |
| |
| &hsusb_phy1 { |
| vdd-supply = <&pm6125_l7>; |
| vdda-pll-supply = <&pm6125_l10>; |
| vdda-phy-dpdm-supply = <&pm6125_l15>; |
| status = "okay"; |
| }; |
| |
| &i2c1 { |
| clock-frequency = <400000>; |
| status = "okay"; |
| |
| /* NXP PN553 NFC @ 28 */ |
| }; |
| |
| &i2c2 { |
| clock-frequency = <400000>; |
| status = "okay"; |
| |
| /* Samsung touchscreen @ 48 */ |
| }; |
| |
| &i2c3 { |
| clock-frequency = <1000000>; |
| status = "okay"; |
| |
| /* Cirrus Logic CS35L41 boosted audio amplifier @ 40 */ |
| }; |
| |
| &mdss { |
| status = "okay"; |
| }; |
| |
| &mdss_dsi0 { |
| vdda-supply = <&pm6125_l18>; |
| status = "okay"; |
| |
| panel@0 { |
| compatible = "samsung,sofef01-m-ams597ut01"; |
| reg = <0>; |
| |
| reset-gpios = <&tlmm 90 GPIO_ACTIVE_LOW>; |
| |
| vddio-supply = <&pm6125_l12>; |
| |
| pinctrl-0 = <&mdss_dsi_active &mdss_te_active_sleep>; |
| pinctrl-1 = <&mdss_dsi_sleep &mdss_te_active_sleep>; |
| pinctrl-names = "default", "sleep"; |
| |
| port { |
| panel_in: endpoint { |
| remote-endpoint = <&mdss_dsi0_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| &mdss_dsi0_out { |
| remote-endpoint = <&panel_in>; |
| data-lanes = <0 1 2 3>; |
| }; |
| |
| &mdss_dsi0_phy { |
| status = "okay"; |
| }; |
| |
| &pm6125_adc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm &rf_pa1_therm>; |
| |
| channel@4d { |
| reg = <ADC5_AMUX_THM1_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| qcom,pre-scaling = <1 1>; |
| label = "rf_pa0_therm"; |
| }; |
| |
| channel@4e { |
| reg = <ADC5_AMUX_THM2_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| qcom,pre-scaling = <1 1>; |
| label = "quiet_therm"; |
| }; |
| |
| channel@52 { |
| reg = <ADC5_GPIO1_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| qcom,pre-scaling = <1 1>; |
| label = "camera_flash_therm"; |
| }; |
| |
| channel@54 { |
| reg = <ADC5_GPIO3_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| qcom,pre-scaling = <1 1>; |
| label = "emmc_ufs_therm"; |
| }; |
| |
| channel@55 { |
| reg = <ADC5_GPIO4_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| qcom,pre-scaling = <1 1>; |
| label = "rf_pa1_therm"; |
| }; |
| }; |
| |
| &pm6125_adc_tm { |
| status = "okay"; |
| |
| rf-pa0-therm@0 { |
| reg = <0>; |
| io-channels = <&pm6125_adc ADC5_AMUX_THM1_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time-us = <200>; |
| }; |
| |
| quiet-therm@1 { |
| reg = <1>; |
| io-channels = <&pm6125_adc ADC5_AMUX_THM2_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time-us = <200>; |
| }; |
| |
| xo-therm@2 { |
| reg = <2>; |
| io-channels = <&pm6125_adc ADC5_XO_THERM_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time-us = <200>; |
| }; |
| |
| rf-pa1-therm@3 { |
| reg = <3>; |
| io-channels = <&pm6125_adc ADC5_GPIO4_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time-us = <200>; |
| }; |
| }; |
| |
| &pm6125_gpios { |
| camera_flash_therm: camera-flash-therm-state { |
| pins = "gpio3"; |
| function = PMIC_GPIO_FUNC_NORMAL; |
| bias-high-impedance; |
| }; |
| |
| emmc_ufs_therm: emmc-ufs-therm-state { |
| pins = "gpio6"; |
| function = PMIC_GPIO_FUNC_NORMAL; |
| bias-high-impedance; |
| }; |
| |
| rf_pa1_therm: rf-pa1-therm-state { |
| pins = "gpio7"; |
| function = PMIC_GPIO_FUNC_NORMAL; |
| bias-high-impedance; |
| }; |
| }; |
| |
| &pon_pwrkey { |
| status = "okay"; |
| }; |
| |
| &pon_resin { |
| status = "okay"; |
| linux,code = <KEY_VOLUMEUP>; |
| }; |
| |
| &rpm_requests { |
| regulators-0 { |
| compatible = "qcom,rpm-pm6125-regulators"; |
| |
| vdd_l2_l3_l4-supply = <&pm6125_l7>; |
| vdd_l5_l15_l19_l20_l21_l22-supply = <&pm6125_l10>; |
| |
| /* |
| * S3/S4 is VDD_CX |
| * S5 is VDD_MX/WCSS_MX |
| */ |
| |
| pm6125_s6: s6 { |
| regulator-min-microvolt = <936000>; |
| regulator-max-microvolt = <1422000>; |
| }; |
| |
| pm6125_l1: l1 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1256000>; |
| }; |
| |
| pm6125_l2: l2 { |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <1056000>; |
| }; |
| |
| pm6125_l3: l3 { |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <1064000>; |
| }; |
| |
| pm6125_l4: l4 { |
| regulator-min-microvolt = <872000>; |
| regulator-max-microvolt = <976000>; |
| }; |
| |
| pm6125_l5: l5 { |
| regulator-min-microvolt = <1648000>; |
| regulator-max-microvolt = <2950000>; |
| regulator-allow-set-load; |
| }; |
| |
| pm6125_l6: l6 { |
| regulator-min-microvolt = <576000>; |
| regulator-max-microvolt = <656000>; |
| }; |
| |
| pm6125_l7: l7 { |
| regulator-min-microvolt = <872000>; |
| regulator-max-microvolt = <976000>; |
| }; |
| |
| pm6125_l8: l8 { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <728000>; |
| }; |
| |
| pm6125_l9: l9 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1896000>; |
| }; |
| |
| pm6125_l10: l10 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1896000>; |
| }; |
| |
| pm6125_l11: l11 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-allow-set-load; |
| }; |
| |
| pm6125_l12: l12 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1996000>; |
| }; |
| |
| pm6125_l13: l13 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1832000>; |
| }; |
| |
| pm6125_l14: l14 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1904000>; |
| }; |
| |
| pm6125_l15: l15 { |
| regulator-min-microvolt = <3104000>; |
| regulator-max-microvolt = <3232000>; |
| }; |
| |
| pm6125_l16: l16 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1904000>; |
| }; |
| |
| pm6125_l17: l17 { |
| regulator-min-microvolt = <1248000>; |
| regulator-max-microvolt = <1304000>; |
| }; |
| |
| pm6125_l18: l18 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1264000>; |
| }; |
| |
| pm6125_l19: l19 { |
| regulator-min-microvolt = <1648000>; |
| regulator-max-microvolt = <2952000>; |
| }; |
| |
| pm6125_l20: l20 { |
| regulator-min-microvolt = <1648000>; |
| regulator-max-microvolt = <2952000>; |
| }; |
| |
| pm6125_l21: l21 { |
| regulator-min-microvolt = <2600000>; |
| regulator-max-microvolt = <2856000>; |
| }; |
| |
| pm6125_l22: l22 { |
| regulator-min-microvolt = <2944000>; |
| regulator-max-microvolt = <2950000>; |
| regulator-allow-set-load; |
| }; |
| |
| pm6125_l23: l23 { |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3400000>; |
| }; |
| |
| pm6125_l24: l24 { |
| regulator-min-microvolt = <2944000>; |
| regulator-max-microvolt = <2950000>; |
| regulator-allow-set-load; |
| }; |
| }; |
| }; |
| |
| &qupv3_id_0 { |
| status = "okay"; |
| }; |
| |
| &sdc2_off_state { |
| sd-cd-pins { |
| pins = "gpio98"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| }; |
| |
| &sdc2_on_state { |
| sd-cd-pins { |
| pins = "gpio98"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| }; |
| |
| &sdhc_1 { |
| vmmc-supply = <&pm6125_l24>; |
| vqmmc-supply = <&pm6125_l11>; |
| status = "okay"; |
| }; |
| |
| &sdhc_2 { |
| cd-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>; |
| vmmc-supply = <&pm6125_l22>; |
| vqmmc-supply = <&pm6125_l5>; |
| no-sdio; |
| no-mmc; |
| status = "okay"; |
| }; |
| |
| &tlmm { |
| gpio-reserved-ranges = <22 2>, <28 6>; |
| |
| vol_down_n: vol-down-n-state { |
| pins = "gpio47"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| mdss_te_active_sleep: mdss-te-active-sleep-state { |
| pins = "gpio89"; |
| function = "mdp_vsync"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| mdss_dsi_active: mdss-dsi-active-state { |
| pins = "gpio90"; |
| function = "gpio"; |
| drive-strength = <8>; |
| bias-disable; |
| }; |
| |
| mdss_dsi_sleep: mdss-dsi-sleep-state { |
| pins = "gpio90"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| }; |
| |
| &usb3 { |
| status = "okay"; |
| }; |
| |
| &usb3_dwc3 { |
| extcon = <&extcon_usb>; |
| }; |
