| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright (c) 2019 Hardkernel Co., Ltd |
| * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH |
| * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com> |
| */ |
| |
| /dts-v1/; |
| #include "rk3326-odroid-go.dtsi" |
| |
| / { |
| model = "ODROID-GO Advance Black Edition"; |
| compatible = "hardkernel,rk3326-odroid-go2-v11", "rockchip,rk3326"; |
| |
| aliases { |
| mmc1 = &sdio; |
| }; |
| |
| analog_sticks: adc-joystick { |
| compatible = "adc-joystick"; |
| io-channels = <&saradc 1>, |
| <&saradc 2>; |
| poll-interval = <60>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| axis@0 { |
| reg = <0>; |
| abs-flat = <10>; |
| abs-fuzz = <10>; |
| abs-range = <172 772>; |
| linux,code = <ABS_X>; |
| }; |
| |
| axis@1 { |
| reg = <1>; |
| abs-flat = <10>; |
| abs-fuzz = <10>; |
| abs-range = <278 815>; |
| linux,code = <ABS_Y>; |
| }; |
| }; |
| |
| battery: battery { |
| compatible = "simple-battery"; |
| charge-full-design-microamp-hours = <3000000>; |
| charge-term-current-microamp = <300000>; |
| constant-charge-current-max-microamp = <2000000>; |
| constant-charge-voltage-max-microvolt = <4200000>; |
| factory-internal-resistance-micro-ohms = <180000>; |
| voltage-max-design-microvolt = <4100000>; |
| voltage-min-design-microvolt = <3500000>; |
| |
| ocv-capacity-celsius = <20>; |
| ocv-capacity-table-0 = <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>, |
| <3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>, |
| <3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>, |
| <3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>, |
| <3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>, |
| <3574170 0>; |
| }; |
| |
| wifi_pwrseq: wifi-pwrseq { |
| compatible = "mmc-pwrseq-simple"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&wifi_pwrseq_pins>; |
| reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| &builtin_gamepad { |
| button-sw20 { |
| gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; |
| label = "TOP-LEFT 2"; |
| linux,code = <BTN_TL2>; |
| }; |
| button-sw21 { |
| gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>; |
| label = "TOP-RIGHT 2"; |
| linux,code = <BTN_TR2>; |
| }; |
| }; |
| |
| &internal_display { |
| compatible = "elida,kd35t133"; |
| iovcc-supply = <&vcc_lcd>; |
| vdd-supply = <&vcc_lcd>; |
| }; |
| |
| &rk817 { |
| regulators { |
| vcc_wifi: LDO_REG9 { |
| regulator-name = "vcc_wifi"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| |
| regulator-state-mem { |
| regulator-on-in-suspend; |
| regulator-suspend-microvolt = <3300000>; |
| }; |
| }; |
| }; |
| }; |
| |
| &rk817_charger { |
| monitored-battery = <&battery>; |
| }; |
| |
| &sdio { |
| bus-width = <4>; |
| cap-sd-highspeed; |
| cap-sdio-irq; |
| disable-wp; |
| keep-power-in-suspend; |
| mmc-pwrseq = <&wifi_pwrseq>; |
| non-removable; |
| vmmc-supply = <&vcc_wifi>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "okay"; |
| |
| esp8089: wifi@1 { |
| compatible = "esp,esp8089"; |
| reg = <1>; |
| }; |
| }; |
| |
| &pinctrl { |
| btns { |
| btn_pins: btn-pins { |
| rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, |
| <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, |
| <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, |
| <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, |
| <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>, |
| <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, |
| <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>, |
| <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>, |
| <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>, |
| <2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>, |
| <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, |
| <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, |
| <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, |
| <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, |
| <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, |
| <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, |
| <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, |
| <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>; |
| }; |
| }; |
| |
| wifi { |
| wifi_pwrseq_pins: wifi-pwrseq-pins { |
| rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>, |
| <3 RK_PB6 RK_FUNC_GPIO &pcfg_output_high>; |
| }; |
| }; |
| }; |