| // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| /* |
| * Tesla FSD board device tree source |
| * |
| * Copyright (c) 2017-2021 Samsung Electronics Co., Ltd. |
| * https://www.samsung.com |
| * Copyright (c) 2017-2021 Tesla, Inc. |
| * https://www.tesla.com |
| */ |
| |
| /dts-v1/; |
| #include "fsd.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| model = "Tesla Full Self-Driving (FSD) Evaluation board"; |
| compatible = "tesla,fsd-evb", "tesla,fsd"; |
| |
| aliases { |
| serial0 = &serial_0; |
| serial1 = &serial_1; |
| }; |
| |
| chosen { |
| stdout-path = &serial_0; |
| }; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| reg = <0x0 0x80000000 0x2 0x00000000>; |
| }; |
| |
| sound { |
| compatible = "simple-audio-card"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| simple-audio-card,name = "FSD Audio Card"; |
| simple-audio-card,widgets = "Line", "Line Out", |
| "Line", "Line In"; |
| simple-audio-card,routing = "Line Out", "LLOUT", |
| "Line Out", "RLOUT", |
| "MIC2L", "Line In", |
| "MIC2R", "Line In"; |
| |
| simple-audio-card,dai-link@0 { |
| reg = <0>; |
| format = "i2s"; |
| bitclock-master = <&tlv320aic3x>; |
| frame-master = <&tlv320aic3x>; |
| |
| cpu-0 { |
| sound-dai = <&i2s_0 0>; |
| }; |
| cpu-1 { |
| sound-dai = <&i2s_0 1>; |
| }; |
| codec { |
| sound-dai = <&tlv320aic3x>; |
| system-clock-frequency = <33000000>; |
| }; |
| }; |
| }; |
| }; |
| |
| &fin_pll { |
| clock-frequency = <24000000>; |
| }; |
| |
| &hsi2c_5 { |
| status = "okay"; |
| |
| tlv320aic3x: codec@18 { |
| compatible = "ti,tlv320aic3104"; |
| reg = <0x18>; |
| #sound-dai-cells = <0>; |
| reset-gpios = <&gpg1 6 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| &i2s_0 { |
| status = "okay"; |
| }; |
| |
| &i2s_1 { |
| status = "okay"; |
| }; |
| |
| &m_can0 { |
| status = "okay"; |
| }; |
| |
| &m_can1 { |
| status = "okay"; |
| }; |
| |
| &m_can2 { |
| status = "okay"; |
| }; |
| |
| &m_can3 { |
| status = "okay"; |
| }; |
| |
| &serial_0 { |
| status = "okay"; |
| }; |
| |
| &ufs { |
| status = "okay"; |
| }; |