| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * misc setup functions for MPC83xx |
| * |
| * Maintainer: Kumar Gala <galak@kernel.crashing.org> |
| */ |
| |
| #include <linux/stddef.h> |
| #include <linux/kernel.h> |
| #include <linux/of_platform.h> |
| #include <linux/pci.h> |
| |
| #include <asm/debug.h> |
| #include <asm/io.h> |
| #include <asm/hw_irq.h> |
| #include <asm/ipic.h> |
| #include <asm/fixmap.h> |
| |
| #include <sysdev/fsl_soc.h> |
| #include <sysdev/fsl_pci.h> |
| |
| #include <mm/mmu_decl.h> |
| |
| #include "mpc83xx.h" |
| |
| static __be32 __iomem *restart_reg_base; |
| |
| static int __init mpc83xx_restart_init(void) |
| { |
| /* map reset restart_reg_baseister space */ |
| restart_reg_base = ioremap(get_immrbase() + 0x900, 0xff); |
| |
| return 0; |
| } |
| |
| arch_initcall(mpc83xx_restart_init); |
| |
| void __noreturn mpc83xx_restart(char *cmd) |
| { |
| #define RST_OFFSET 0x00000900 |
| #define RST_PROT_REG 0x00000018 |
| #define RST_CTRL_REG 0x0000001c |
| |
| local_irq_disable(); |
| |
| if (restart_reg_base) { |
| /* enable software reset "RSTE" */ |
| out_be32(restart_reg_base + (RST_PROT_REG >> 2), 0x52535445); |
| |
| /* set software hard reset */ |
| out_be32(restart_reg_base + (RST_CTRL_REG >> 2), 0x2); |
| } else { |
| printk (KERN_EMERG "Error: Restart registers not mapped, spinning!\n"); |
| } |
| |
| for (;;) ; |
| } |
| |
| long __init mpc83xx_time_init(void) |
| { |
| #define SPCR_OFFSET 0x00000110 |
| #define SPCR_TBEN 0x00400000 |
| __be32 __iomem *spcr = ioremap(get_immrbase() + SPCR_OFFSET, 4); |
| __be32 tmp; |
| |
| tmp = in_be32(spcr); |
| out_be32(spcr, tmp | SPCR_TBEN); |
| |
| iounmap(spcr); |
| |
| return 0; |
| } |
| |
| void __init mpc83xx_ipic_init_IRQ(void) |
| { |
| struct device_node *np; |
| |
| /* looking for fsl,pq2pro-pic which is asl compatible with fsl,ipic */ |
| np = of_find_compatible_node(NULL, NULL, "fsl,ipic"); |
| if (!np) |
| np = of_find_node_by_type(NULL, "ipic"); |
| if (!np) |
| return; |
| |
| ipic_init(np, 0); |
| |
| of_node_put(np); |
| |
| /* Initialize the default interrupt mapping priorities, |
| * in case the boot rom changed something on us. |
| */ |
| ipic_set_default_priority(); |
| } |
| |
| static const struct of_device_id of_bus_ids[] __initconst = { |
| { .type = "soc", }, |
| { .compatible = "soc", }, |
| { .compatible = "simple-bus" }, |
| { .compatible = "gianfar" }, |
| { .compatible = "gpio-leds", }, |
| { .type = "qe", }, |
| { .compatible = "fsl,qe", }, |
| {}, |
| }; |
| |
| int __init mpc83xx_declare_of_platform_devices(void) |
| { |
| of_platform_bus_probe(NULL, of_bus_ids, NULL); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PCI |
| void __init mpc83xx_setup_pci(void) |
| { |
| struct device_node *np; |
| |
| for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") |
| mpc83xx_add_bridge(np); |
| for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie") |
| mpc83xx_add_bridge(np); |
| } |
| #endif |
| |
| void __init mpc83xx_setup_arch(void) |
| { |
| phys_addr_t immrbase = get_immrbase(); |
| int immrsize = IS_ALIGNED(immrbase, SZ_2M) ? SZ_2M : SZ_1M; |
| unsigned long va = fix_to_virt(FIX_IMMR_BASE); |
| |
| if (ppc_md.progress) |
| ppc_md.progress("mpc83xx_setup_arch()", 0); |
| |
| setbat(-1, va, immrbase, immrsize, PAGE_KERNEL_NCG); |
| update_bats(); |
| } |
| |
| int machine_check_83xx(struct pt_regs *regs) |
| { |
| u32 mask = 1 << (31 - IPIC_MCP_WDT); |
| |
| if (!(regs->msr & SRR1_MCE_MCP) || !(ipic_get_mcp_status() & mask)) |
| return machine_check_generic(regs); |
| ipic_clear_mcp_status(mask); |
| |
| if (debugger_fault_handler(regs)) |
| return 1; |
| |
| die("Watchdog NMI Reset", regs, 0); |
| |
| return 1; |
| } |