| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Xilinx VCU Init |
| * |
| * Copyright (C) 2016 - 2017 Xilinx, Inc. |
| * |
| * Contacts Dhaval Shah <dshah@xilinx.com> |
| */ |
| #include <linux/bitfield.h> |
| #include <linux/clk.h> |
| #include <linux/clk-provider.h> |
| #include <linux/device.h> |
| #include <linux/errno.h> |
| #include <linux/io.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/mfd/syscon/xlnx-vcu.h> |
| #include <linux/module.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| |
| #include <dt-bindings/clock/xlnx-vcu.h> |
| |
| #define VCU_PLL_CTRL 0x24 |
| #define VCU_PLL_CTRL_RESET BIT(0) |
| #define VCU_PLL_CTRL_POR_IN BIT(1) |
| #define VCU_PLL_CTRL_PWR_POR BIT(2) |
| #define VCU_PLL_CTRL_BYPASS BIT(3) |
| #define VCU_PLL_CTRL_FBDIV GENMASK(14, 8) |
| #define VCU_PLL_CTRL_CLKOUTDIV GENMASK(18, 16) |
| |
| #define VCU_PLL_CFG 0x28 |
| #define VCU_PLL_CFG_RES GENMASK(3, 0) |
| #define VCU_PLL_CFG_CP GENMASK(8, 5) |
| #define VCU_PLL_CFG_LFHF GENMASK(12, 10) |
| #define VCU_PLL_CFG_LOCK_CNT GENMASK(22, 13) |
| #define VCU_PLL_CFG_LOCK_DLY GENMASK(31, 25) |
| #define VCU_ENC_CORE_CTRL 0x30 |
| #define VCU_ENC_MCU_CTRL 0x34 |
| #define VCU_DEC_CORE_CTRL 0x38 |
| #define VCU_DEC_MCU_CTRL 0x3c |
| #define VCU_PLL_STATUS 0x60 |
| #define VCU_PLL_STATUS_LOCK_STATUS BIT(0) |
| |
| #define MHZ 1000000 |
| #define FVCO_MIN (1500U * MHZ) |
| #define FVCO_MAX (3000U * MHZ) |
| |
| /** |
| * struct xvcu_device - Xilinx VCU init device structure |
| * @dev: Platform device |
| * @pll_ref: pll ref clock source |
| * @aclk: axi clock source |
| * @logicore_reg_ba: logicore reg base address |
| * @vcu_slcr_ba: vcu_slcr Register base address |
| * @pll: handle for the VCU PLL |
| * @pll_post: handle for the VCU PLL post divider |
| * @clk_data: clocks provided by the vcu clock provider |
| */ |
| struct xvcu_device { |
| struct device *dev; |
| struct clk *pll_ref; |
| struct clk *aclk; |
| struct regmap *logicore_reg_ba; |
| void __iomem *vcu_slcr_ba; |
| struct clk_hw *pll; |
| struct clk_hw *pll_post; |
| struct clk_hw_onecell_data *clk_data; |
| }; |
| |
| static struct regmap_config vcu_settings_regmap_config = { |
| .name = "regmap", |
| .reg_bits = 32, |
| .val_bits = 32, |
| .reg_stride = 4, |
| .max_register = 0xfff, |
| .cache_type = REGCACHE_NONE, |
| }; |
| |
| /** |
| * struct xvcu_pll_cfg - Helper data |
| * @fbdiv: The integer portion of the feedback divider to the PLL |
| * @cp: PLL charge pump control |
| * @res: PLL loop filter resistor control |
| * @lfhf: PLL loop filter high frequency capacitor control |
| * @lock_dly: Lock circuit configuration settings for lock windowsize |
| * @lock_cnt: Lock circuit counter setting |
| */ |
| struct xvcu_pll_cfg { |
| u32 fbdiv; |
| u32 cp; |
| u32 res; |
| u32 lfhf; |
| u32 lock_dly; |
| u32 lock_cnt; |
| }; |
| |
| static const struct xvcu_pll_cfg xvcu_pll_cfg[] = { |
| { 25, 3, 10, 3, 63, 1000 }, |
| { 26, 3, 10, 3, 63, 1000 }, |
| { 27, 4, 6, 3, 63, 1000 }, |
| { 28, 4, 6, 3, 63, 1000 }, |
| { 29, 4, 6, 3, 63, 1000 }, |
| { 30, 4, 6, 3, 63, 1000 }, |
| { 31, 6, 1, 3, 63, 1000 }, |
| { 32, 6, 1, 3, 63, 1000 }, |
| { 33, 4, 10, 3, 63, 1000 }, |
| { 34, 5, 6, 3, 63, 1000 }, |
| { 35, 5, 6, 3, 63, 1000 }, |
| { 36, 5, 6, 3, 63, 1000 }, |
| { 37, 5, 6, 3, 63, 1000 }, |
| { 38, 5, 6, 3, 63, 975 }, |
| { 39, 3, 12, 3, 63, 950 }, |
| { 40, 3, 12, 3, 63, 925 }, |
| { 41, 3, 12, 3, 63, 900 }, |
| { 42, 3, 12, 3, 63, 875 }, |
| { 43, 3, 12, 3, 63, 850 }, |
| { 44, 3, 12, 3, 63, 850 }, |
| { 45, 3, 12, 3, 63, 825 }, |
| { 46, 3, 12, 3, 63, 800 }, |
| { 47, 3, 12, 3, 63, 775 }, |
| { 48, 3, 12, 3, 63, 775 }, |
| { 49, 3, 12, 3, 63, 750 }, |
| { 50, 3, 12, 3, 63, 750 }, |
| { 51, 3, 2, 3, 63, 725 }, |
| { 52, 3, 2, 3, 63, 700 }, |
| { 53, 3, 2, 3, 63, 700 }, |
| { 54, 3, 2, 3, 63, 675 }, |
| { 55, 3, 2, 3, 63, 675 }, |
| { 56, 3, 2, 3, 63, 650 }, |
| { 57, 3, 2, 3, 63, 650 }, |
| { 58, 3, 2, 3, 63, 625 }, |
| { 59, 3, 2, 3, 63, 625 }, |
| { 60, 3, 2, 3, 63, 625 }, |
| { 61, 3, 2, 3, 63, 600 }, |
| { 62, 3, 2, 3, 63, 600 }, |
| { 63, 3, 2, 3, 63, 600 }, |
| { 64, 3, 2, 3, 63, 600 }, |
| { 65, 3, 2, 3, 63, 600 }, |
| { 66, 3, 2, 3, 63, 600 }, |
| { 67, 3, 2, 3, 63, 600 }, |
| { 68, 3, 2, 3, 63, 600 }, |
| { 69, 3, 2, 3, 63, 600 }, |
| { 70, 3, 2, 3, 63, 600 }, |
| { 71, 3, 2, 3, 63, 600 }, |
| { 72, 3, 2, 3, 63, 600 }, |
| { 73, 3, 2, 3, 63, 600 }, |
| { 74, 3, 2, 3, 63, 600 }, |
| { 75, 3, 2, 3, 63, 600 }, |
| { 76, 3, 2, 3, 63, 600 }, |
| { 77, 3, 2, 3, 63, 600 }, |
| { 78, 3, 2, 3, 63, 600 }, |
| { 79, 3, 2, 3, 63, 600 }, |
| { 80, 3, 2, 3, 63, 600 }, |
| { 81, 3, 2, 3, 63, 600 }, |
| { 82, 3, 2, 3, 63, 600 }, |
| { 83, 4, 2, 3, 63, 600 }, |
| { 84, 4, 2, 3, 63, 600 }, |
| { 85, 4, 2, 3, 63, 600 }, |
| { 86, 4, 2, 3, 63, 600 }, |
| { 87, 4, 2, 3, 63, 600 }, |
| { 88, 4, 2, 3, 63, 600 }, |
| { 89, 4, 2, 3, 63, 600 }, |
| { 90, 4, 2, 3, 63, 600 }, |
| { 91, 4, 2, 3, 63, 600 }, |
| { 92, 4, 2, 3, 63, 600 }, |
| { 93, 4, 2, 3, 63, 600 }, |
| { 94, 4, 2, 3, 63, 600 }, |
| { 95, 4, 2, 3, 63, 600 }, |
| { 96, 4, 2, 3, 63, 600 }, |
| { 97, 4, 2, 3, 63, 600 }, |
| { 98, 4, 2, 3, 63, 600 }, |
| { 99, 4, 2, 3, 63, 600 }, |
| { 100, 4, 2, 3, 63, 600 }, |
| { 101, 4, 2, 3, 63, 600 }, |
| { 102, 4, 2, 3, 63, 600 }, |
| { 103, 5, 2, 3, 63, 600 }, |
| { 104, 5, 2, 3, 63, 600 }, |
| { 105, 5, 2, 3, 63, 600 }, |
| { 106, 5, 2, 3, 63, 600 }, |
| { 107, 3, 4, 3, 63, 600 }, |
| { 108, 3, 4, 3, 63, 600 }, |
| { 109, 3, 4, 3, 63, 600 }, |
| { 110, 3, 4, 3, 63, 600 }, |
| { 111, 3, 4, 3, 63, 600 }, |
| { 112, 3, 4, 3, 63, 600 }, |
| { 113, 3, 4, 3, 63, 600 }, |
| { 114, 3, 4, 3, 63, 600 }, |
| { 115, 3, 4, 3, 63, 600 }, |
| { 116, 3, 4, 3, 63, 600 }, |
| { 117, 3, 4, 3, 63, 600 }, |
| { 118, 3, 4, 3, 63, 600 }, |
| { 119, 3, 4, 3, 63, 600 }, |
| { 120, 3, 4, 3, 63, 600 }, |
| { 121, 3, 4, 3, 63, 600 }, |
| { 122, 3, 4, 3, 63, 600 }, |
| { 123, 3, 4, 3, 63, 600 }, |
| { 124, 3, 4, 3, 63, 600 }, |
| { 125, 3, 4, 3, 63, 600 }, |
| }; |
| |
| /** |
| * xvcu_read - Read from the VCU register space |
| * @iomem: vcu reg space base address |
| * @offset: vcu reg offset from base |
| * |
| * Return: Returns 32bit value from VCU register specified |
| * |
| */ |
| static inline u32 xvcu_read(void __iomem *iomem, u32 offset) |
| { |
| return ioread32(iomem + offset); |
| } |
| |
| /** |
| * xvcu_write - Write to the VCU register space |
| * @iomem: vcu reg space base address |
| * @offset: vcu reg offset from base |
| * @value: Value to write |
| */ |
| static inline void xvcu_write(void __iomem *iomem, u32 offset, u32 value) |
| { |
| iowrite32(value, iomem + offset); |
| } |
| |
| #define to_vcu_pll(_hw) container_of(_hw, struct vcu_pll, hw) |
| |
| struct vcu_pll { |
| struct clk_hw hw; |
| void __iomem *reg_base; |
| unsigned long fvco_min; |
| unsigned long fvco_max; |
| }; |
| |
| static int xvcu_pll_wait_for_lock(struct vcu_pll *pll) |
| { |
| void __iomem *base = pll->reg_base; |
| unsigned long timeout; |
| u32 lock_status; |
| |
| timeout = jiffies + msecs_to_jiffies(2000); |
| do { |
| lock_status = xvcu_read(base, VCU_PLL_STATUS); |
| if (lock_status & VCU_PLL_STATUS_LOCK_STATUS) |
| return 0; |
| } while (!time_after(jiffies, timeout)); |
| |
| return -ETIMEDOUT; |
| } |
| |
| static struct clk_hw *xvcu_register_pll_post(struct device *dev, |
| const char *name, |
| const struct clk_hw *parent_hw, |
| void __iomem *reg_base) |
| { |
| u32 div; |
| u32 vcu_pll_ctrl; |
| |
| /* |
| * The output divider of the PLL must be set to 1/2 to meet the |
| * timing in the design. |
| */ |
| vcu_pll_ctrl = xvcu_read(reg_base, VCU_PLL_CTRL); |
| div = FIELD_GET(VCU_PLL_CTRL_CLKOUTDIV, vcu_pll_ctrl); |
| if (div != 1) |
| return ERR_PTR(-EINVAL); |
| |
| return clk_hw_register_fixed_factor(dev, "vcu_pll_post", |
| clk_hw_get_name(parent_hw), |
| CLK_SET_RATE_PARENT, 1, 2); |
| } |
| |
| static const struct xvcu_pll_cfg *xvcu_find_cfg(int div) |
| { |
| const struct xvcu_pll_cfg *cfg = NULL; |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(xvcu_pll_cfg) - 1; i++) |
| if (xvcu_pll_cfg[i].fbdiv == div) |
| cfg = &xvcu_pll_cfg[i]; |
| |
| return cfg; |
| } |
| |
| static int xvcu_pll_set_div(struct vcu_pll *pll, int div) |
| { |
| void __iomem *base = pll->reg_base; |
| const struct xvcu_pll_cfg *cfg = NULL; |
| u32 vcu_pll_ctrl; |
| u32 cfg_val; |
| |
| cfg = xvcu_find_cfg(div); |
| if (!cfg) |
| return -EINVAL; |
| |
| vcu_pll_ctrl = xvcu_read(base, VCU_PLL_CTRL); |
| vcu_pll_ctrl &= ~VCU_PLL_CTRL_FBDIV; |
| vcu_pll_ctrl |= FIELD_PREP(VCU_PLL_CTRL_FBDIV, cfg->fbdiv); |
| xvcu_write(base, VCU_PLL_CTRL, vcu_pll_ctrl); |
| |
| cfg_val = FIELD_PREP(VCU_PLL_CFG_RES, cfg->res) | |
| FIELD_PREP(VCU_PLL_CFG_CP, cfg->cp) | |
| FIELD_PREP(VCU_PLL_CFG_LFHF, cfg->lfhf) | |
| FIELD_PREP(VCU_PLL_CFG_LOCK_CNT, cfg->lock_cnt) | |
| FIELD_PREP(VCU_PLL_CFG_LOCK_DLY, cfg->lock_dly); |
| xvcu_write(base, VCU_PLL_CFG, cfg_val); |
| |
| return 0; |
| } |
| |
| static long xvcu_pll_round_rate(struct clk_hw *hw, |
| unsigned long rate, unsigned long *parent_rate) |
| { |
| struct vcu_pll *pll = to_vcu_pll(hw); |
| unsigned int feedback_div; |
| |
| rate = clamp_t(unsigned long, rate, pll->fvco_min, pll->fvco_max); |
| |
| feedback_div = DIV_ROUND_CLOSEST_ULL(rate, *parent_rate); |
| feedback_div = clamp_t(unsigned int, feedback_div, 25, 125); |
| |
| return *parent_rate * feedback_div; |
| } |
| |
| static unsigned long xvcu_pll_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct vcu_pll *pll = to_vcu_pll(hw); |
| void __iomem *base = pll->reg_base; |
| unsigned int div; |
| u32 vcu_pll_ctrl; |
| |
| vcu_pll_ctrl = xvcu_read(base, VCU_PLL_CTRL); |
| div = FIELD_GET(VCU_PLL_CTRL_FBDIV, vcu_pll_ctrl); |
| |
| return div * parent_rate; |
| } |
| |
| static int xvcu_pll_set_rate(struct clk_hw *hw, |
| unsigned long rate, unsigned long parent_rate) |
| { |
| struct vcu_pll *pll = to_vcu_pll(hw); |
| |
| return xvcu_pll_set_div(pll, rate / parent_rate); |
| } |
| |
| static int xvcu_pll_enable(struct clk_hw *hw) |
| { |
| struct vcu_pll *pll = to_vcu_pll(hw); |
| void __iomem *base = pll->reg_base; |
| u32 vcu_pll_ctrl; |
| int ret; |
| |
| vcu_pll_ctrl = xvcu_read(base, VCU_PLL_CTRL); |
| vcu_pll_ctrl |= VCU_PLL_CTRL_BYPASS; |
| xvcu_write(base, VCU_PLL_CTRL, vcu_pll_ctrl); |
| |
| vcu_pll_ctrl = xvcu_read(base, VCU_PLL_CTRL); |
| vcu_pll_ctrl &= ~VCU_PLL_CTRL_POR_IN; |
| vcu_pll_ctrl &= ~VCU_PLL_CTRL_PWR_POR; |
| vcu_pll_ctrl &= ~VCU_PLL_CTRL_RESET; |
| xvcu_write(base, VCU_PLL_CTRL, vcu_pll_ctrl); |
| |
| ret = xvcu_pll_wait_for_lock(pll); |
| if (ret) { |
| pr_err("VCU PLL is not locked\n"); |
| goto err; |
| } |
| |
| vcu_pll_ctrl = xvcu_read(base, VCU_PLL_CTRL); |
| vcu_pll_ctrl &= ~VCU_PLL_CTRL_BYPASS; |
| xvcu_write(base, VCU_PLL_CTRL, vcu_pll_ctrl); |
| |
| err: |
| return ret; |
| } |
| |
| static void xvcu_pll_disable(struct clk_hw *hw) |
| { |
| struct vcu_pll *pll = to_vcu_pll(hw); |
| void __iomem *base = pll->reg_base; |
| u32 vcu_pll_ctrl; |
| |
| vcu_pll_ctrl = xvcu_read(base, VCU_PLL_CTRL); |
| vcu_pll_ctrl |= VCU_PLL_CTRL_POR_IN; |
| vcu_pll_ctrl |= VCU_PLL_CTRL_PWR_POR; |
| vcu_pll_ctrl |= VCU_PLL_CTRL_RESET; |
| xvcu_write(base, VCU_PLL_CTRL, vcu_pll_ctrl); |
| } |
| |
| static const struct clk_ops vcu_pll_ops = { |
| .enable = xvcu_pll_enable, |
| .disable = xvcu_pll_disable, |
| .round_rate = xvcu_pll_round_rate, |
| .recalc_rate = xvcu_pll_recalc_rate, |
| .set_rate = xvcu_pll_set_rate, |
| }; |
| |
| static struct clk_hw *xvcu_register_pll(struct device *dev, |
| void __iomem *reg_base, |
| const char *name, const char *parent, |
| unsigned long flags) |
| { |
| struct vcu_pll *pll; |
| struct clk_hw *hw; |
| struct clk_init_data init; |
| int ret; |
| |
| init.name = name; |
| init.parent_names = &parent; |
| init.ops = &vcu_pll_ops; |
| init.num_parents = 1; |
| init.flags = flags; |
| |
| pll = devm_kmalloc(dev, sizeof(*pll), GFP_KERNEL); |
| if (!pll) |
| return ERR_PTR(-ENOMEM); |
| |
| pll->hw.init = &init; |
| pll->reg_base = reg_base; |
| pll->fvco_min = FVCO_MIN; |
| pll->fvco_max = FVCO_MAX; |
| |
| hw = &pll->hw; |
| ret = devm_clk_hw_register(dev, hw); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| clk_hw_set_rate_range(hw, pll->fvco_min, pll->fvco_max); |
| |
| return hw; |
| } |
| |
| static struct clk_hw *xvcu_clk_hw_register_leaf(struct device *dev, |
| const char *name, |
| const struct clk_parent_data *parent_data, |
| u8 num_parents, |
| void __iomem *reg) |
| { |
| u8 mux_flags = CLK_MUX_ROUND_CLOSEST; |
| u8 divider_flags = CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO | |
| CLK_DIVIDER_ROUND_CLOSEST; |
| struct clk_hw *mux = NULL; |
| struct clk_hw *divider = NULL; |
| struct clk_hw *gate = NULL; |
| char *name_mux; |
| char *name_div; |
| int err; |
| /* Protect register shared by clocks */ |
| spinlock_t *lock; |
| |
| lock = devm_kzalloc(dev, sizeof(*lock), GFP_KERNEL); |
| if (!lock) |
| return ERR_PTR(-ENOMEM); |
| spin_lock_init(lock); |
| |
| name_mux = devm_kasprintf(dev, GFP_KERNEL, "%s%s", name, "_mux"); |
| if (!name_mux) |
| return ERR_PTR(-ENOMEM); |
| mux = clk_hw_register_mux_parent_data(dev, name_mux, |
| parent_data, num_parents, |
| CLK_SET_RATE_PARENT, |
| reg, 0, 1, mux_flags, lock); |
| if (IS_ERR(mux)) |
| return mux; |
| |
| name_div = devm_kasprintf(dev, GFP_KERNEL, "%s%s", name, "_div"); |
| if (!name_div) { |
| err = -ENOMEM; |
| goto unregister_mux; |
| } |
| divider = clk_hw_register_divider_parent_hw(dev, name_div, mux, |
| CLK_SET_RATE_PARENT, |
| reg, 4, 6, divider_flags, |
| lock); |
| if (IS_ERR(divider)) { |
| err = PTR_ERR(divider); |
| goto unregister_mux; |
| } |
| |
| gate = clk_hw_register_gate_parent_hw(dev, name, divider, |
| CLK_SET_RATE_PARENT, reg, 12, 0, |
| lock); |
| if (IS_ERR(gate)) { |
| err = PTR_ERR(gate); |
| goto unregister_divider; |
| } |
| |
| return gate; |
| |
| unregister_divider: |
| clk_hw_unregister_divider(divider); |
| unregister_mux: |
| clk_hw_unregister_mux(mux); |
| |
| return ERR_PTR(err); |
| } |
| |
| static void xvcu_clk_hw_unregister_leaf(struct clk_hw *hw) |
| { |
| struct clk_hw *gate = hw; |
| struct clk_hw *divider; |
| struct clk_hw *mux; |
| |
| if (!gate) |
| return; |
| |
| divider = clk_hw_get_parent(gate); |
| clk_hw_unregister_gate(gate); |
| if (!divider) |
| return; |
| |
| mux = clk_hw_get_parent(divider); |
| clk_hw_unregister_mux(mux); |
| if (!divider) |
| return; |
| |
| clk_hw_unregister_divider(divider); |
| } |
| |
| static int xvcu_register_clock_provider(struct xvcu_device *xvcu) |
| { |
| struct device *dev = xvcu->dev; |
| struct clk_parent_data parent_data[2] = { 0 }; |
| struct clk_hw_onecell_data *data; |
| struct clk_hw **hws; |
| struct clk_hw *hw; |
| void __iomem *reg_base = xvcu->vcu_slcr_ba; |
| |
| data = devm_kzalloc(dev, struct_size(data, hws, CLK_XVCU_NUM_CLOCKS), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| data->num = CLK_XVCU_NUM_CLOCKS; |
| hws = data->hws; |
| |
| xvcu->clk_data = data; |
| |
| hw = xvcu_register_pll(dev, reg_base, |
| "vcu_pll", __clk_get_name(xvcu->pll_ref), |
| CLK_SET_RATE_NO_REPARENT | CLK_OPS_PARENT_ENABLE); |
| if (IS_ERR(hw)) |
| return PTR_ERR(hw); |
| xvcu->pll = hw; |
| |
| hw = xvcu_register_pll_post(dev, "vcu_pll_post", xvcu->pll, reg_base); |
| if (IS_ERR(hw)) |
| return PTR_ERR(hw); |
| xvcu->pll_post = hw; |
| |
| parent_data[0].fw_name = "pll_ref"; |
| parent_data[1].hw = xvcu->pll_post; |
| |
| hws[CLK_XVCU_ENC_CORE] = |
| xvcu_clk_hw_register_leaf(dev, "venc_core_clk", |
| parent_data, |
| ARRAY_SIZE(parent_data), |
| reg_base + VCU_ENC_CORE_CTRL); |
| hws[CLK_XVCU_ENC_MCU] = |
| xvcu_clk_hw_register_leaf(dev, "venc_mcu_clk", |
| parent_data, |
| ARRAY_SIZE(parent_data), |
| reg_base + VCU_ENC_MCU_CTRL); |
| hws[CLK_XVCU_DEC_CORE] = |
| xvcu_clk_hw_register_leaf(dev, "vdec_core_clk", |
| parent_data, |
| ARRAY_SIZE(parent_data), |
| reg_base + VCU_DEC_CORE_CTRL); |
| hws[CLK_XVCU_DEC_MCU] = |
| xvcu_clk_hw_register_leaf(dev, "vdec_mcu_clk", |
| parent_data, |
| ARRAY_SIZE(parent_data), |
| reg_base + VCU_DEC_MCU_CTRL); |
| |
| return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, data); |
| } |
| |
| static void xvcu_unregister_clock_provider(struct xvcu_device *xvcu) |
| { |
| struct clk_hw_onecell_data *data = xvcu->clk_data; |
| struct clk_hw **hws = data->hws; |
| |
| if (!IS_ERR_OR_NULL(hws[CLK_XVCU_DEC_MCU])) |
| xvcu_clk_hw_unregister_leaf(hws[CLK_XVCU_DEC_MCU]); |
| if (!IS_ERR_OR_NULL(hws[CLK_XVCU_DEC_CORE])) |
| xvcu_clk_hw_unregister_leaf(hws[CLK_XVCU_DEC_CORE]); |
| if (!IS_ERR_OR_NULL(hws[CLK_XVCU_ENC_MCU])) |
| xvcu_clk_hw_unregister_leaf(hws[CLK_XVCU_ENC_MCU]); |
| if (!IS_ERR_OR_NULL(hws[CLK_XVCU_ENC_CORE])) |
| xvcu_clk_hw_unregister_leaf(hws[CLK_XVCU_ENC_CORE]); |
| |
| clk_hw_unregister_fixed_factor(xvcu->pll_post); |
| } |
| |
| /** |
| * xvcu_probe - Probe existence of the logicoreIP |
| * and initialize PLL |
| * |
| * @pdev: Pointer to the platform_device structure |
| * |
| * Return: Returns 0 on success |
| * Negative error code otherwise |
| */ |
| static int xvcu_probe(struct platform_device *pdev) |
| { |
| struct resource *res; |
| struct xvcu_device *xvcu; |
| void __iomem *regs; |
| int ret; |
| |
| xvcu = devm_kzalloc(&pdev->dev, sizeof(*xvcu), GFP_KERNEL); |
| if (!xvcu) |
| return -ENOMEM; |
| |
| xvcu->dev = &pdev->dev; |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "vcu_slcr"); |
| if (!res) { |
| dev_err(&pdev->dev, "get vcu_slcr memory resource failed.\n"); |
| return -ENODEV; |
| } |
| |
| xvcu->vcu_slcr_ba = devm_ioremap(&pdev->dev, res->start, |
| resource_size(res)); |
| if (!xvcu->vcu_slcr_ba) { |
| dev_err(&pdev->dev, "vcu_slcr register mapping failed.\n"); |
| return -ENOMEM; |
| } |
| |
| xvcu->logicore_reg_ba = |
| syscon_regmap_lookup_by_compatible("xlnx,vcu-settings"); |
| if (IS_ERR(xvcu->logicore_reg_ba)) { |
| dev_info(&pdev->dev, |
| "could not find xlnx,vcu-settings: trying direct register access\n"); |
| |
| res = platform_get_resource_byname(pdev, |
| IORESOURCE_MEM, "logicore"); |
| if (!res) { |
| dev_err(&pdev->dev, "get logicore memory resource failed.\n"); |
| return -ENODEV; |
| } |
| |
| regs = devm_ioremap(&pdev->dev, res->start, resource_size(res)); |
| if (!regs) { |
| dev_err(&pdev->dev, "logicore register mapping failed.\n"); |
| return -ENOMEM; |
| } |
| |
| xvcu->logicore_reg_ba = |
| devm_regmap_init_mmio(&pdev->dev, regs, |
| &vcu_settings_regmap_config); |
| if (IS_ERR(xvcu->logicore_reg_ba)) { |
| dev_err(&pdev->dev, "failed to init regmap\n"); |
| return PTR_ERR(xvcu->logicore_reg_ba); |
| } |
| } |
| |
| xvcu->aclk = devm_clk_get(&pdev->dev, "aclk"); |
| if (IS_ERR(xvcu->aclk)) { |
| dev_err(&pdev->dev, "Could not get aclk clock\n"); |
| return PTR_ERR(xvcu->aclk); |
| } |
| |
| xvcu->pll_ref = devm_clk_get(&pdev->dev, "pll_ref"); |
| if (IS_ERR(xvcu->pll_ref)) { |
| dev_err(&pdev->dev, "Could not get pll_ref clock\n"); |
| return PTR_ERR(xvcu->pll_ref); |
| } |
| |
| ret = clk_prepare_enable(xvcu->aclk); |
| if (ret) { |
| dev_err(&pdev->dev, "aclk clock enable failed\n"); |
| return ret; |
| } |
| |
| /* |
| * Do the Gasket isolation and put the VCU out of reset |
| * Bit 0 : Gasket isolation |
| * Bit 1 : put VCU out of reset |
| */ |
| regmap_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, VCU_GASKET_VALUE); |
| |
| ret = xvcu_register_clock_provider(xvcu); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to register clock provider\n"); |
| goto error_clk_provider; |
| } |
| |
| dev_set_drvdata(&pdev->dev, xvcu); |
| |
| return 0; |
| |
| error_clk_provider: |
| xvcu_unregister_clock_provider(xvcu); |
| clk_disable_unprepare(xvcu->aclk); |
| return ret; |
| } |
| |
| /** |
| * xvcu_remove - Insert gasket isolation |
| * and disable the clock |
| * @pdev: Pointer to the platform_device structure |
| * |
| * Return: Returns 0 on success |
| * Negative error code otherwise |
| */ |
| static void xvcu_remove(struct platform_device *pdev) |
| { |
| struct xvcu_device *xvcu; |
| |
| xvcu = platform_get_drvdata(pdev); |
| |
| xvcu_unregister_clock_provider(xvcu); |
| |
| /* Add the Gasket isolation and put the VCU in reset. */ |
| regmap_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, 0); |
| |
| clk_disable_unprepare(xvcu->aclk); |
| } |
| |
| static const struct of_device_id xvcu_of_id_table[] = { |
| { .compatible = "xlnx,vcu" }, |
| { .compatible = "xlnx,vcu-logicoreip-1.0" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, xvcu_of_id_table); |
| |
| static struct platform_driver xvcu_driver = { |
| .driver = { |
| .name = "xilinx-vcu", |
| .of_match_table = xvcu_of_id_table, |
| }, |
| .probe = xvcu_probe, |
| .remove_new = xvcu_remove, |
| }; |
| |
| module_platform_driver(xvcu_driver); |
| |
| MODULE_AUTHOR("Dhaval Shah <dshah@xilinx.com>"); |
| MODULE_DESCRIPTION("Xilinx VCU init Driver"); |
| MODULE_LICENSE("GPL v2"); |