| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright 2020 Martin Blumenstingl <martin.blumenstingl@googlemail.com> |
| * |
| * Based on panfrost_devfreq.c: |
| * Copyright 2019 Collabora ltd. |
| */ |
| #include <linux/clk.h> |
| #include <linux/devfreq.h> |
| #include <linux/devfreq_cooling.h> |
| #include <linux/device.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_opp.h> |
| #include <linux/property.h> |
| |
| #include "lima_device.h" |
| #include "lima_devfreq.h" |
| |
| static void lima_devfreq_update_utilization(struct lima_devfreq *devfreq) |
| { |
| ktime_t now, last; |
| |
| now = ktime_get(); |
| last = devfreq->time_last_update; |
| |
| if (devfreq->busy_count > 0) |
| devfreq->busy_time += ktime_sub(now, last); |
| else |
| devfreq->idle_time += ktime_sub(now, last); |
| |
| devfreq->time_last_update = now; |
| } |
| |
| static int lima_devfreq_target(struct device *dev, unsigned long *freq, |
| u32 flags) |
| { |
| struct dev_pm_opp *opp; |
| |
| opp = devfreq_recommended_opp(dev, freq, flags); |
| if (IS_ERR(opp)) |
| return PTR_ERR(opp); |
| dev_pm_opp_put(opp); |
| |
| return dev_pm_opp_set_rate(dev, *freq); |
| } |
| |
| static void lima_devfreq_reset(struct lima_devfreq *devfreq) |
| { |
| devfreq->busy_time = 0; |
| devfreq->idle_time = 0; |
| devfreq->time_last_update = ktime_get(); |
| } |
| |
| static int lima_devfreq_get_dev_status(struct device *dev, |
| struct devfreq_dev_status *status) |
| { |
| struct lima_device *ldev = dev_get_drvdata(dev); |
| struct lima_devfreq *devfreq = &ldev->devfreq; |
| unsigned long irqflags; |
| |
| status->current_frequency = clk_get_rate(ldev->clk_gpu); |
| |
| spin_lock_irqsave(&devfreq->lock, irqflags); |
| |
| lima_devfreq_update_utilization(devfreq); |
| |
| status->total_time = ktime_to_ns(ktime_add(devfreq->busy_time, |
| devfreq->idle_time)); |
| status->busy_time = ktime_to_ns(devfreq->busy_time); |
| |
| lima_devfreq_reset(devfreq); |
| |
| spin_unlock_irqrestore(&devfreq->lock, irqflags); |
| |
| dev_dbg(ldev->dev, "busy %lu total %lu %lu %% freq %lu MHz\n", |
| status->busy_time, status->total_time, |
| status->busy_time / (status->total_time / 100), |
| status->current_frequency / 1000 / 1000); |
| |
| return 0; |
| } |
| |
| static struct devfreq_dev_profile lima_devfreq_profile = { |
| .timer = DEVFREQ_TIMER_DELAYED, |
| .polling_ms = 50, /* ~3 frames */ |
| .target = lima_devfreq_target, |
| .get_dev_status = lima_devfreq_get_dev_status, |
| }; |
| |
| void lima_devfreq_fini(struct lima_device *ldev) |
| { |
| struct lima_devfreq *devfreq = &ldev->devfreq; |
| |
| if (devfreq->cooling) { |
| devfreq_cooling_unregister(devfreq->cooling); |
| devfreq->cooling = NULL; |
| } |
| |
| if (devfreq->devfreq) { |
| devm_devfreq_remove_device(ldev->dev, devfreq->devfreq); |
| devfreq->devfreq = NULL; |
| } |
| } |
| |
| int lima_devfreq_init(struct lima_device *ldev) |
| { |
| struct thermal_cooling_device *cooling; |
| struct device *dev = ldev->dev; |
| struct devfreq *devfreq; |
| struct lima_devfreq *ldevfreq = &ldev->devfreq; |
| struct dev_pm_opp *opp; |
| unsigned long cur_freq; |
| int ret; |
| const char *regulator_names[] = { "mali", NULL }; |
| |
| if (!device_property_present(dev, "operating-points-v2")) |
| /* Optional, continue without devfreq */ |
| return 0; |
| |
| spin_lock_init(&ldevfreq->lock); |
| |
| /* |
| * clkname is set separately so it is not affected by the optional |
| * regulator setting which may return error. |
| */ |
| ret = devm_pm_opp_set_clkname(dev, "core"); |
| if (ret) |
| return ret; |
| |
| ret = devm_pm_opp_set_regulators(dev, regulator_names); |
| if (ret) { |
| /* Continue if the optional regulator is missing */ |
| if (ret != -ENODEV) |
| return ret; |
| } |
| |
| ret = devm_pm_opp_of_add_table(dev); |
| if (ret) |
| return ret; |
| |
| lima_devfreq_reset(ldevfreq); |
| |
| cur_freq = clk_get_rate(ldev->clk_gpu); |
| |
| opp = devfreq_recommended_opp(dev, &cur_freq, 0); |
| if (IS_ERR(opp)) |
| return PTR_ERR(opp); |
| |
| lima_devfreq_profile.initial_freq = cur_freq; |
| dev_pm_opp_put(opp); |
| |
| /* |
| * Setup default thresholds for the simple_ondemand governor. |
| * The values are chosen based on experiments. |
| */ |
| ldevfreq->gov_data.upthreshold = 30; |
| ldevfreq->gov_data.downdifferential = 5; |
| |
| devfreq = devm_devfreq_add_device(dev, &lima_devfreq_profile, |
| DEVFREQ_GOV_SIMPLE_ONDEMAND, |
| &ldevfreq->gov_data); |
| if (IS_ERR(devfreq)) { |
| dev_err(dev, "Couldn't initialize GPU devfreq\n"); |
| return PTR_ERR(devfreq); |
| } |
| |
| ldevfreq->devfreq = devfreq; |
| |
| cooling = of_devfreq_cooling_register(dev->of_node, devfreq); |
| if (IS_ERR(cooling)) |
| dev_info(dev, "Failed to register cooling device\n"); |
| else |
| ldevfreq->cooling = cooling; |
| |
| return 0; |
| } |
| |
| void lima_devfreq_record_busy(struct lima_devfreq *devfreq) |
| { |
| unsigned long irqflags; |
| |
| if (!devfreq->devfreq) |
| return; |
| |
| spin_lock_irqsave(&devfreq->lock, irqflags); |
| |
| lima_devfreq_update_utilization(devfreq); |
| |
| devfreq->busy_count++; |
| |
| spin_unlock_irqrestore(&devfreq->lock, irqflags); |
| } |
| |
| void lima_devfreq_record_idle(struct lima_devfreq *devfreq) |
| { |
| unsigned long irqflags; |
| |
| if (!devfreq->devfreq) |
| return; |
| |
| spin_lock_irqsave(&devfreq->lock, irqflags); |
| |
| lima_devfreq_update_utilization(devfreq); |
| |
| WARN_ON(--devfreq->busy_count < 0); |
| |
| spin_unlock_irqrestore(&devfreq->lock, irqflags); |
| } |
| |
| int lima_devfreq_resume(struct lima_devfreq *devfreq) |
| { |
| unsigned long irqflags; |
| |
| if (!devfreq->devfreq) |
| return 0; |
| |
| spin_lock_irqsave(&devfreq->lock, irqflags); |
| |
| lima_devfreq_reset(devfreq); |
| |
| spin_unlock_irqrestore(&devfreq->lock, irqflags); |
| |
| return devfreq_resume_device(devfreq->devfreq); |
| } |
| |
| int lima_devfreq_suspend(struct lima_devfreq *devfreq) |
| { |
| if (!devfreq->devfreq) |
| return 0; |
| |
| return devfreq_suspend_device(devfreq->devfreq); |
| } |