drivers/net/phy/icplus.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for ICPlus PHYs
  *
  * Copyright (c) 2007 Freescale Semiconductor, Inc.
  */
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/errno.h>
 #include <linux/unistd.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/skbuff.h>
 #include <linux/spinlock.h>
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/mii.h>
 #include <linux/ethtool.h>
 #include <linux/phy.h>
 #include <linux/property.h>

 #include <asm/io.h>
 #include <asm/irq.h>
 #include <linux/uaccess.h>

 MODULE_DESCRIPTION("ICPlus IP175C/IP101A/IP101G/IC1001 PHY drivers");
 MODULE_AUTHOR("Michael Barkowski");
 MODULE_LICENSE("GPL");

 /* IP101A/G - IP1001 */
 #define IP10XX_SPEC_CTRL_STATUS		16	/* Spec. Control Register */
 #define IP1001_RXPHASE_SEL		BIT(0)	/* Add delay on RX_CLK */
 #define IP1001_TXPHASE_SEL		BIT(1)	/* Add delay on TX_CLK */
 #define IP1001_SPEC_CTRL_STATUS_2	20	/* IP1001 Spec. Control Reg 2 */
 #define IP1001_APS_ON			11	/* IP1001 APS Mode  bit */
 #define IP101A_G_APS_ON			BIT(1)	/* IP101A/G APS Mode bit */
 #define IP101A_G_AUTO_MDIX_DIS		BIT(11)
 #define IP101A_G_IRQ_CONF_STATUS	0x11	/* Conf Info IRQ & Status Reg */
 #define	IP101A_G_IRQ_PIN_USED		BIT(15) /* INTR pin used */
 #define IP101A_G_IRQ_ALL_MASK		BIT(11) /* IRQ's inactive */
 #define IP101A_G_IRQ_SPEED_CHANGE	BIT(2)
 #define IP101A_G_IRQ_DUPLEX_CHANGE	BIT(1)
 #define IP101A_G_IRQ_LINK_CHANGE	BIT(0)
 #define IP101A_G_PHY_STATUS		18
 #define IP101A_G_MDIX			BIT(9)
 #define IP101A_G_PHY_SPEC_CTRL		30
 #define IP101A_G_FORCE_MDIX		BIT(3)

 #define IP101G_PAGE_CONTROL				0x14
 #define IP101G_PAGE_CONTROL_MASK			GENMASK(4, 0)
 #define IP101G_DIGITAL_IO_SPEC_CTRL			0x1d
 #define IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32		BIT(2)

 #define IP101G_DEFAULT_PAGE			16

 #define IP101G_P1_CNT_CTRL		17
 #define CNT_CTRL_RX_EN			BIT(13)
 #define IP101G_P8_CNT_CTRL		17
 #define CNT_CTRL_RDCLR_EN		BIT(15)
 #define IP101G_CNT_REG			18

 #define IP175C_PHY_ID 0x02430d80
 #define IP1001_PHY_ID 0x02430d90
 #define IP101A_PHY_ID 0x02430c54

 /* The 32-pin IP101GR package can re-configure the mode of the RXER/INTR_32 pin
  * (pin number 21). The hardware default is RXER (receive error) mode. But it
  * can be configured to interrupt mode manually.
  */
 enum ip101gr_sel_intr32 {
 	IP101GR_SEL_INTR32_KEEP,
 	IP101GR_SEL_INTR32_INTR,
 	IP101GR_SEL_INTR32_RXER,
 };

 struct ip101g_hw_stat {
 	const char *name;
 	int page;
 };

 static struct ip101g_hw_stat ip101g_hw_stats[] = {
 	{ "phy_crc_errors", 1 },
 	{ "phy_symbol_errors", 11, },
 };

 struct ip101a_g_phy_priv {
 	enum ip101gr_sel_intr32 sel_intr32;
 	u64 stats[ARRAY_SIZE(ip101g_hw_stats)];
 };

 static int ip175c_config_init(struct phy_device *phydev)
 {
 	int err, i;
 	static int full_reset_performed;

 	if (full_reset_performed == 0) {

 		/* master reset */
 		err = mdiobus_write(phydev->mdio.bus, 30, 0, 0x175c);
 		if (err < 0)
 			return err;

 		/* ensure no bus delays overlap reset period */
 		err = mdiobus_read(phydev->mdio.bus, 30, 0);

 		/* data sheet specifies reset period is 2 msec */
 		mdelay(2);

 		/* enable IP175C mode */
 		err = mdiobus_write(phydev->mdio.bus, 29, 31, 0x175c);
 		if (err < 0)
 			return err;

 		/* Set MII0 speed and duplex (in PHY mode) */
 		err = mdiobus_write(phydev->mdio.bus, 29, 22, 0x420);
 		if (err < 0)
 			return err;

 		/* reset switch ports */
 		for (i = 0; i < 5; i++) {
 			err = mdiobus_write(phydev->mdio.bus, i,
 					    MII_BMCR, BMCR_RESET);
 			if (err < 0)
 				return err;
 		}

 		for (i = 0; i < 5; i++)
 			err = mdiobus_read(phydev->mdio.bus, i, MII_BMCR);

 		mdelay(2);

 		full_reset_performed = 1;
 	}

 	if (phydev->mdio.addr != 4) {
 		phydev->state = PHY_RUNNING;
 		phydev->speed = SPEED_100;
 		phydev->duplex = DUPLEX_FULL;
 		phydev->link = 1;
 		netif_carrier_on(phydev->attached_dev);
 	}

 	return 0;
 }

 static int ip1001_config_init(struct phy_device *phydev)
 {
 	int c;

 	/* Enable Auto Power Saving mode */
 	c = phy_read(phydev, IP1001_SPEC_CTRL_STATUS_2);
 	if (c < 0)
 		return c;
 	c |= IP1001_APS_ON;
 	c = phy_write(phydev, IP1001_SPEC_CTRL_STATUS_2, c);
 	if (c < 0)
 		return c;

 	if (phy_interface_is_rgmii(phydev)) {

 		c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
 		if (c < 0)
 			return c;

 		c &= ~(IP1001_RXPHASE_SEL | IP1001_TXPHASE_SEL);

 		if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
 			c |= (IP1001_RXPHASE_SEL | IP1001_TXPHASE_SEL);
 		else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
 			c |= IP1001_RXPHASE_SEL;
 		else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
 			c |= IP1001_TXPHASE_SEL;

 		c = phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c);
 		if (c < 0)
 			return c;
 	}

 	return 0;
 }

 static int ip175c_read_status(struct phy_device *phydev)
 {
 	if (phydev->mdio.addr == 4) /* WAN port */
 		genphy_read_status(phydev);
 	else
 		/* Don't need to read status for switch ports */
 		phydev->irq = PHY_MAC_INTERRUPT;

 	return 0;
 }

 static int ip175c_config_aneg(struct phy_device *phydev)
 {
 	if (phydev->mdio.addr == 4) /* WAN port */
 		genphy_config_aneg(phydev);

 	return 0;
 }

 static int ip101a_g_probe(struct phy_device *phydev)
 {
 	struct device *dev = &phydev->mdio.dev;
 	struct ip101a_g_phy_priv *priv;

 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;

 	/* Both functions (RX error and interrupt status) are sharing the same
 	 * pin on the 32-pin IP101GR, so this is an exclusive choice.
 	 */
 	if (device_property_read_bool(dev, "icplus,select-rx-error") &&
 	    device_property_read_bool(dev, "icplus,select-interrupt")) {
 		dev_err(dev,
 			"RXER and INTR mode cannot be selected together\n");
 		return -EINVAL;
 	}

 	if (device_property_read_bool(dev, "icplus,select-rx-error"))
 		priv->sel_intr32 = IP101GR_SEL_INTR32_RXER;
 	else if (device_property_read_bool(dev, "icplus,select-interrupt"))
 		priv->sel_intr32 = IP101GR_SEL_INTR32_INTR;
 	else
 		priv->sel_intr32 = IP101GR_SEL_INTR32_KEEP;

 	phydev->priv = priv;

 	return 0;
 }

 static int ip101a_g_config_intr_pin(struct phy_device *phydev)
 {
 	struct ip101a_g_phy_priv *priv = phydev->priv;
 	int oldpage, err = 0;

 	oldpage = phy_select_page(phydev, IP101G_DEFAULT_PAGE);
 	if (oldpage < 0)
 		goto out;

 	/* configure the RXER/INTR_32 pin of the 32-pin IP101GR if needed: */
 	switch (priv->sel_intr32) {
 	case IP101GR_SEL_INTR32_RXER:
 		err = __phy_modify(phydev, IP101G_DIGITAL_IO_SPEC_CTRL,
 				   IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32, 0);
 		if (err < 0)
 			goto out;
 		break;

 	case IP101GR_SEL_INTR32_INTR:
 		err = __phy_modify(phydev, IP101G_DIGITAL_IO_SPEC_CTRL,
 				   IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32,
 				   IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32);
 		if (err < 0)
 			goto out;
 		break;

 	default:
 		/* Don't touch IP101G_DIGITAL_IO_SPEC_CTRL because it's not
 		 * documented on IP101A and it's not clear whether this would
 		 * cause problems.
 		 * For the 32-pin IP101GR we simply keep the SEL_INTR32
 		 * configuration as set by the bootloader when not configured
 		 * to one of the special functions.
 		 */
 		break;
 	}

 out:
 	return phy_restore_page(phydev, oldpage, err);
 }

 static int ip101a_config_init(struct phy_device *phydev)
 {
 	int ret;

 	/* Enable Auto Power Saving mode */
 	ret = phy_set_bits(phydev, IP10XX_SPEC_CTRL_STATUS, IP101A_G_APS_ON);
 	if (ret)
 		return ret;

 	return ip101a_g_config_intr_pin(phydev);
 }

 static int ip101g_config_init(struct phy_device *phydev)
 {
 	int ret;

 	/* Enable the PHY counters */
 	ret = phy_modify_paged(phydev, 1, IP101G_P1_CNT_CTRL,
 			       CNT_CTRL_RX_EN, CNT_CTRL_RX_EN);
 	if (ret)
 		return ret;

 	/* Clear error counters on read */
 	ret = phy_modify_paged(phydev, 8, IP101G_P8_CNT_CTRL,
 			       CNT_CTRL_RDCLR_EN, CNT_CTRL_RDCLR_EN);
 	if (ret)
 		return ret;

 	return ip101a_g_config_intr_pin(phydev);
 }

 static int ip101a_g_read_status(struct phy_device *phydev)
 {
 	int oldpage, ret, stat1, stat2;

 	ret = genphy_read_status(phydev);
 	if (ret)
 		return ret;

 	oldpage = phy_select_page(phydev, IP101G_DEFAULT_PAGE);
 	if (oldpage < 0)
 		goto out;

 	ret = __phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
 	if (ret < 0)
 		goto out;
 	stat1 = ret;

 	ret = __phy_read(phydev, IP101A_G_PHY_SPEC_CTRL);
 	if (ret < 0)
 		goto out;
 	stat2 = ret;

 	if (stat1 & IP101A_G_AUTO_MDIX_DIS) {
 		if (stat2 & IP101A_G_FORCE_MDIX)
 			phydev->mdix_ctrl = ETH_TP_MDI_X;
 		else
 			phydev->mdix_ctrl = ETH_TP_MDI;
 	} else {
 		phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
 	}

 	if (stat2 & IP101A_G_MDIX)
 		phydev->mdix = ETH_TP_MDI_X;
 	else
 		phydev->mdix = ETH_TP_MDI;

 	ret = 0;

 out:
 	return phy_restore_page(phydev, oldpage, ret);
 }

 static int ip101a_g_config_mdix(struct phy_device *phydev)
 {
 	u16 ctrl = 0, ctrl2 = 0;
 	int oldpage;
 	int ret = 0;

 	switch (phydev->mdix_ctrl) {
 	case ETH_TP_MDI:
 		ctrl = IP101A_G_AUTO_MDIX_DIS;
 		break;
 	case ETH_TP_MDI_X:
 		ctrl = IP101A_G_AUTO_MDIX_DIS;
 		ctrl2 = IP101A_G_FORCE_MDIX;
 		break;
 	case ETH_TP_MDI_AUTO:
 		break;
 	default:
 		return 0;
 	}

 	oldpage = phy_select_page(phydev, IP101G_DEFAULT_PAGE);
 	if (oldpage < 0)
 		goto out;

 	ret = __phy_modify(phydev, IP10XX_SPEC_CTRL_STATUS,
 			   IP101A_G_AUTO_MDIX_DIS, ctrl);
 	if (ret)
 		goto out;

 	ret = __phy_modify(phydev, IP101A_G_PHY_SPEC_CTRL,
 			   IP101A_G_FORCE_MDIX, ctrl2);

 out:
 	return phy_restore_page(phydev, oldpage, ret);
 }

 static int ip101a_g_config_aneg(struct phy_device *phydev)
 {
 	int ret;

 	ret = ip101a_g_config_mdix(phydev);
 	if (ret)
 		return ret;

 	return genphy_config_aneg(phydev);
 }

 static int ip101a_g_ack_interrupt(struct phy_device *phydev)
 {
 	int err;

 	err = phy_read_paged(phydev, IP101G_DEFAULT_PAGE,
 			     IP101A_G_IRQ_CONF_STATUS);
 	if (err < 0)
 		return err;

 	return 0;
 }

 static int ip101a_g_config_intr(struct phy_device *phydev)
 {
 	u16 val;
 	int err;

 	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
 		err = ip101a_g_ack_interrupt(phydev);
 		if (err)
 			return err;

 		/* INTR pin used: Speed/link/duplex will cause an interrupt */
 		val = IP101A_G_IRQ_PIN_USED;
 		err = phy_write_paged(phydev, IP101G_DEFAULT_PAGE,
 				      IP101A_G_IRQ_CONF_STATUS, val);
 	} else {
 		val = IP101A_G_IRQ_ALL_MASK;
 		err = phy_write_paged(phydev, IP101G_DEFAULT_PAGE,
 				      IP101A_G_IRQ_CONF_STATUS, val);
 		if (err)
 			return err;

 		err = ip101a_g_ack_interrupt(phydev);
 	}

 	return err;
 }

 static irqreturn_t ip101a_g_handle_interrupt(struct phy_device *phydev)
 {
 	int irq_status;

 	irq_status = phy_read_paged(phydev, IP101G_DEFAULT_PAGE,
 				    IP101A_G_IRQ_CONF_STATUS);
 	if (irq_status < 0) {
 		phy_error(phydev);
 		return IRQ_NONE;
 	}

 	if (!(irq_status & (IP101A_G_IRQ_SPEED_CHANGE |
 			    IP101A_G_IRQ_DUPLEX_CHANGE |
 			    IP101A_G_IRQ_LINK_CHANGE)))
 		return IRQ_NONE;

 	phy_trigger_machine(phydev);

 	return IRQ_HANDLED;
 }

 /* The IP101A doesn't really have a page register. We just pretend to have one
  * so we can use the paged versions of the callbacks of the IP101G.
  */
 static int ip101a_read_page(struct phy_device *phydev)
 {
 	return IP101G_DEFAULT_PAGE;
 }

 static int ip101a_write_page(struct phy_device *phydev, int page)
 {
 	WARN_ONCE(page != IP101G_DEFAULT_PAGE, "wrong page selected\n");

 	return 0;
 }

 static int ip101g_read_page(struct phy_device *phydev)
 {
 	return __phy_read(phydev, IP101G_PAGE_CONTROL);
 }

 static int ip101g_write_page(struct phy_device *phydev, int page)
 {
 	return __phy_write(phydev, IP101G_PAGE_CONTROL, page);
 }

 static int ip101a_g_has_page_register(struct phy_device *phydev)
 {
 	int oldval, val, ret;

 	oldval = phy_read(phydev, IP101G_PAGE_CONTROL);
 	if (oldval < 0)
 		return oldval;

 	ret = phy_write(phydev, IP101G_PAGE_CONTROL, 0xffff);
 	if (ret)
 		return ret;

 	val = phy_read(phydev, IP101G_PAGE_CONTROL);
 	if (val < 0)
 		return val;

 	ret = phy_write(phydev, IP101G_PAGE_CONTROL, oldval);
 	if (ret)
 		return ret;

 	return val == IP101G_PAGE_CONTROL_MASK;
 }

 static int ip101a_g_match_phy_device(struct phy_device *phydev, bool ip101a)
 {
 	int ret;

 	if (phydev->phy_id != IP101A_PHY_ID)
 		return 0;

 	/* The IP101A and the IP101G share the same PHY identifier.The IP101G
 	 * seems to be a successor of the IP101A and implements more functions.
 	 * Amongst other things there is a page select register, which is not
 	 * available on the IP101A. Use this to distinguish these two.
 	 */
 	ret = ip101a_g_has_page_register(phydev);
 	if (ret < 0)
 		return ret;

 	return ip101a == !ret;
 }

 static int ip101a_match_phy_device(struct phy_device *phydev)
 {
 	return ip101a_g_match_phy_device(phydev, true);
 }

 static int ip101g_match_phy_device(struct phy_device *phydev)
 {
 	return ip101a_g_match_phy_device(phydev, false);
 }

 static int ip101g_get_sset_count(struct phy_device *phydev)
 {
 	return ARRAY_SIZE(ip101g_hw_stats);
 }

 static void ip101g_get_strings(struct phy_device *phydev, u8 *data)
 {
 	int i;

 	for (i = 0; i < ARRAY_SIZE(ip101g_hw_stats); i++)
 		strscpy(data + i * ETH_GSTRING_LEN,
 			ip101g_hw_stats[i].name, ETH_GSTRING_LEN);
 }

 static u64 ip101g_get_stat(struct phy_device *phydev, int i)
 {
 	struct ip101g_hw_stat stat = ip101g_hw_stats[i];
 	struct ip101a_g_phy_priv *priv = phydev->priv;
 	int val;
 	u64 ret;

 	val = phy_read_paged(phydev, stat.page, IP101G_CNT_REG);
 	if (val < 0) {
 		ret = U64_MAX;
 	} else {
 		priv->stats[i] += val;
 		ret = priv->stats[i];
 	}

 	return ret;
 }

 static void ip101g_get_stats(struct phy_device *phydev,
 			     struct ethtool_stats *stats, u64 *data)
 {
 	int i;

 	for (i = 0; i < ARRAY_SIZE(ip101g_hw_stats); i++)
 		data[i] = ip101g_get_stat(phydev, i);
 }

 static struct phy_driver icplus_driver[] = {
 {
 	PHY_ID_MATCH_MODEL(IP175C_PHY_ID),
 	.name		= "ICPlus IP175C",
 	/* PHY_BASIC_FEATURES */
 	.config_init	= ip175c_config_init,
 	.config_aneg	= ip175c_config_aneg,
 	.read_status	= ip175c_read_status,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
 }, {
 	PHY_ID_MATCH_MODEL(IP1001_PHY_ID),
 	.name		= "ICPlus IP1001",
 	/* PHY_GBIT_FEATURES */
 	.config_init	= ip1001_config_init,
 	.soft_reset	= genphy_soft_reset,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
 }, {
 	.name		= "ICPlus IP101A",
 	.match_phy_device = ip101a_match_phy_device,
 	.probe		= ip101a_g_probe,
 	.read_page	= ip101a_read_page,
 	.write_page	= ip101a_write_page,
 	.config_intr	= ip101a_g_config_intr,
 	.handle_interrupt = ip101a_g_handle_interrupt,
 	.config_init	= ip101a_config_init,
 	.config_aneg	= ip101a_g_config_aneg,
 	.read_status	= ip101a_g_read_status,
 	.soft_reset	= genphy_soft_reset,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
 }, {
 	.name		= "ICPlus IP101G",
 	.match_phy_device = ip101g_match_phy_device,
 	.probe		= ip101a_g_probe,
 	.read_page	= ip101g_read_page,
 	.write_page	= ip101g_write_page,
 	.config_intr	= ip101a_g_config_intr,
 	.handle_interrupt = ip101a_g_handle_interrupt,
 	.config_init	= ip101g_config_init,
 	.config_aneg	= ip101a_g_config_aneg,
 	.read_status	= ip101a_g_read_status,
 	.soft_reset	= genphy_soft_reset,
 	.get_sset_count = ip101g_get_sset_count,
 	.get_strings	= ip101g_get_strings,
 	.get_stats	= ip101g_get_stats,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
 } };

 module_phy_driver(icplus_driver);

 static struct mdio_device_id __maybe_unused icplus_tbl[] = {
 	{ PHY_ID_MATCH_MODEL(IP175C_PHY_ID) },
 	{ PHY_ID_MATCH_MODEL(IP1001_PHY_ID) },
 	{ PHY_ID_MATCH_EXACT(IP101A_PHY_ID) },
 	{ }
 };

 MODULE_DEVICE_TABLE(mdio, icplus_tbl);
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* Driver for ICPlus PHYs
	*
	* Copyright (c) 2007 Freescale Semiconductor, Inc.
	*/
	#include <linux/kernel.h>
	#include <linux/string.h>
	#include <linux/errno.h>
	#include <linux/unistd.h>
	#include <linux/interrupt.h>
	#include <linux/init.h>
	#include <linux/delay.h>
	#include <linux/netdevice.h>
	#include <linux/etherdevice.h>
	#include <linux/skbuff.h>
	#include <linux/spinlock.h>
	#include <linux/mm.h>
	#include <linux/module.h>
	#include <linux/mii.h>
	#include <linux/ethtool.h>
	#include <linux/phy.h>
	#include <linux/property.h>

	#include <asm/io.h>
	#include <asm/irq.h>
	#include <linux/uaccess.h>

	MODULE_DESCRIPTION("ICPlus IP175C/IP101A/IP101G/IC1001 PHY drivers");
	MODULE_AUTHOR("Michael Barkowski");
	MODULE_LICENSE("GPL");

	/* IP101A/G - IP1001 */
	#define IP10XX_SPEC_CTRL_STATUS 16 /* Spec. Control Register */
	#define IP1001_RXPHASE_SEL BIT(0) /* Add delay on RX_CLK */
	#define IP1001_TXPHASE_SEL BIT(1) /* Add delay on TX_CLK */
	#define IP1001_SPEC_CTRL_STATUS_2 20 /* IP1001 Spec. Control Reg 2 */
	#define IP1001_APS_ON 11 /* IP1001 APS Mode bit */
	#define IP101A_G_APS_ON BIT(1) /* IP101A/G APS Mode bit */
	#define IP101A_G_AUTO_MDIX_DIS BIT(11)
	#define IP101A_G_IRQ_CONF_STATUS 0x11 /* Conf Info IRQ & Status Reg */
	#define IP101A_G_IRQ_PIN_USED BIT(15) /* INTR pin used */
	#define IP101A_G_IRQ_ALL_MASK BIT(11) /* IRQ's inactive */
	#define IP101A_G_IRQ_SPEED_CHANGE BIT(2)
	#define IP101A_G_IRQ_DUPLEX_CHANGE BIT(1)
	#define IP101A_G_IRQ_LINK_CHANGE BIT(0)
	#define IP101A_G_PHY_STATUS 18
	#define IP101A_G_MDIX BIT(9)
	#define IP101A_G_PHY_SPEC_CTRL 30
	#define IP101A_G_FORCE_MDIX BIT(3)

	#define IP101G_PAGE_CONTROL 0x14
	#define IP101G_PAGE_CONTROL_MASK GENMASK(4, 0)
	#define IP101G_DIGITAL_IO_SPEC_CTRL 0x1d
	#define IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32 BIT(2)

	#define IP101G_DEFAULT_PAGE 16

	#define IP101G_P1_CNT_CTRL 17
	#define CNT_CTRL_RX_EN BIT(13)
	#define IP101G_P8_CNT_CTRL 17
	#define CNT_CTRL_RDCLR_EN BIT(15)
	#define IP101G_CNT_REG 18

	#define IP175C_PHY_ID 0x02430d80
	#define IP1001_PHY_ID 0x02430d90
	#define IP101A_PHY_ID 0x02430c54

	/* The 32-pin IP101GR package can re-configure the mode of the RXER/INTR_32 pin
	* (pin number 21). The hardware default is RXER (receive error) mode. But it
	* can be configured to interrupt mode manually.
	*/
	enum ip101gr_sel_intr32 {
	IP101GR_SEL_INTR32_KEEP,
	IP101GR_SEL_INTR32_INTR,
	IP101GR_SEL_INTR32_RXER,
	};

	struct ip101g_hw_stat {
	const char *name;
	int page;
	};

	static struct ip101g_hw_stat ip101g_hw_stats[] = {
	{ "phy_crc_errors", 1 },
	{ "phy_symbol_errors", 11, },
	};

	struct ip101a_g_phy_priv {
	enum ip101gr_sel_intr32 sel_intr32;
	u64 stats[ARRAY_SIZE(ip101g_hw_stats)];
	};

	static int ip175c_config_init(struct phy_device *phydev)
	{
	int err, i;
	static int full_reset_performed;

	if (full_reset_performed == 0) {

	/* master reset */
	err = mdiobus_write(phydev->mdio.bus, 30, 0, 0x175c);
	if (err < 0)
	return err;

	/* ensure no bus delays overlap reset period */
	err = mdiobus_read(phydev->mdio.bus, 30, 0);

	/* data sheet specifies reset period is 2 msec */
	mdelay(2);

	/* enable IP175C mode */
	err = mdiobus_write(phydev->mdio.bus, 29, 31, 0x175c);
	if (err < 0)
	return err;

	/* Set MII0 speed and duplex (in PHY mode) */
	err = mdiobus_write(phydev->mdio.bus, 29, 22, 0x420);
	if (err < 0)
	return err;

	/* reset switch ports */
	for (i = 0; i < 5; i++) {
	err = mdiobus_write(phydev->mdio.bus, i,
	MII_BMCR, BMCR_RESET);
	if (err < 0)
	return err;
	}

	for (i = 0; i < 5; i++)
	err = mdiobus_read(phydev->mdio.bus, i, MII_BMCR);

	mdelay(2);

	full_reset_performed = 1;
	}

	if (phydev->mdio.addr != 4) {
	phydev->state = PHY_RUNNING;
	phydev->speed = SPEED_100;
	phydev->duplex = DUPLEX_FULL;
	phydev->link = 1;
	netif_carrier_on(phydev->attached_dev);
	}

	return 0;
	}

	static int ip1001_config_init(struct phy_device *phydev)
	{
	int c;

	/* Enable Auto Power Saving mode */
	c = phy_read(phydev, IP1001_SPEC_CTRL_STATUS_2);
	if (c < 0)
	return c;
	c \|= IP1001_APS_ON;
	c = phy_write(phydev, IP1001_SPEC_CTRL_STATUS_2, c);
	if (c < 0)
	return c;

	if (phy_interface_is_rgmii(phydev)) {

	c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
	if (c < 0)
	return c;

	c &= ~(IP1001_RXPHASE_SEL \| IP1001_TXPHASE_SEL);

	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
	c \|= (IP1001_RXPHASE_SEL \| IP1001_TXPHASE_SEL);
	else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
	c \|= IP1001_RXPHASE_SEL;
	else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
	c \|= IP1001_TXPHASE_SEL;

	c = phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c);
	if (c < 0)
	return c;
	}

	return 0;
	}

	static int ip175c_read_status(struct phy_device *phydev)
	{
	if (phydev->mdio.addr == 4) /* WAN port */
	genphy_read_status(phydev);
	else
	/* Don't need to read status for switch ports */
	phydev->irq = PHY_MAC_INTERRUPT;

	return 0;
	}

	static int ip175c_config_aneg(struct phy_device *phydev)
	{
	if (phydev->mdio.addr == 4) /* WAN port */
	genphy_config_aneg(phydev);

	return 0;
	}

	static int ip101a_g_probe(struct phy_device *phydev)
	{
	struct device *dev = &phydev->mdio.dev;
	struct ip101a_g_phy_priv *priv;

	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
	if (!priv)
	return -ENOMEM;

	/* Both functions (RX error and interrupt status) are sharing the same
	* pin on the 32-pin IP101GR, so this is an exclusive choice.
	*/
	if (device_property_read_bool(dev, "icplus,select-rx-error") &&
	device_property_read_bool(dev, "icplus,select-interrupt")) {
	dev_err(dev,
	"RXER and INTR mode cannot be selected together\n");
	return -EINVAL;
	}

	if (device_property_read_bool(dev, "icplus,select-rx-error"))
	priv->sel_intr32 = IP101GR_SEL_INTR32_RXER;
	else if (device_property_read_bool(dev, "icplus,select-interrupt"))
	priv->sel_intr32 = IP101GR_SEL_INTR32_INTR;
	else
	priv->sel_intr32 = IP101GR_SEL_INTR32_KEEP;

	phydev->priv = priv;

	return 0;
	}

	static int ip101a_g_config_intr_pin(struct phy_device *phydev)
	{
	struct ip101a_g_phy_priv *priv = phydev->priv;
	int oldpage, err = 0;

	oldpage = phy_select_page(phydev, IP101G_DEFAULT_PAGE);
	if (oldpage < 0)
	goto out;

	/* configure the RXER/INTR_32 pin of the 32-pin IP101GR if needed: */
	switch (priv->sel_intr32) {
	case IP101GR_SEL_INTR32_RXER:
	err = __phy_modify(phydev, IP101G_DIGITAL_IO_SPEC_CTRL,
	IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32, 0);
	if (err < 0)
	goto out;
	break;

	case IP101GR_SEL_INTR32_INTR:
	err = __phy_modify(phydev, IP101G_DIGITAL_IO_SPEC_CTRL,
	IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32,
	IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32);
	if (err < 0)
	goto out;
	break;

	default:
	/* Don't touch IP101G_DIGITAL_IO_SPEC_CTRL because it's not
	* documented on IP101A and it's not clear whether this would
	* cause problems.
	* For the 32-pin IP101GR we simply keep the SEL_INTR32
	* configuration as set by the bootloader when not configured
	* to one of the special functions.
	*/
	break;
	}

	out:
	return phy_restore_page(phydev, oldpage, err);
	}

	static int ip101a_config_init(struct phy_device *phydev)
	{
	int ret;

	/* Enable Auto Power Saving mode */
	ret = phy_set_bits(phydev, IP10XX_SPEC_CTRL_STATUS, IP101A_G_APS_ON);
	if (ret)
	return ret;

	return ip101a_g_config_intr_pin(phydev);
	}

	static int ip101g_config_init(struct phy_device *phydev)
	{
	int ret;

	/* Enable the PHY counters */
	ret = phy_modify_paged(phydev, 1, IP101G_P1_CNT_CTRL,
	CNT_CTRL_RX_EN, CNT_CTRL_RX_EN);
	if (ret)
	return ret;

	/* Clear error counters on read */
	ret = phy_modify_paged(phydev, 8, IP101G_P8_CNT_CTRL,
	CNT_CTRL_RDCLR_EN, CNT_CTRL_RDCLR_EN);
	if (ret)
	return ret;

	return ip101a_g_config_intr_pin(phydev);
	}

	static int ip101a_g_read_status(struct phy_device *phydev)
	{
	int oldpage, ret, stat1, stat2;

	ret = genphy_read_status(phydev);
	if (ret)
	return ret;

	oldpage = phy_select_page(phydev, IP101G_DEFAULT_PAGE);
	if (oldpage < 0)
	goto out;

	ret = __phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
	if (ret < 0)
	goto out;
	stat1 = ret;

	ret = __phy_read(phydev, IP101A_G_PHY_SPEC_CTRL);
	if (ret < 0)
	goto out;
	stat2 = ret;

	if (stat1 & IP101A_G_AUTO_MDIX_DIS) {
	if (stat2 & IP101A_G_FORCE_MDIX)
	phydev->mdix_ctrl = ETH_TP_MDI_X;
	else
	phydev->mdix_ctrl = ETH_TP_MDI;
	} else {
	phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
	}

	if (stat2 & IP101A_G_MDIX)
	phydev->mdix = ETH_TP_MDI_X;
	else
	phydev->mdix = ETH_TP_MDI;

	ret = 0;

	out:
	return phy_restore_page(phydev, oldpage, ret);
	}

	static int ip101a_g_config_mdix(struct phy_device *phydev)
	{
	u16 ctrl = 0, ctrl2 = 0;
	int oldpage;
	int ret = 0;

	switch (phydev->mdix_ctrl) {
	case ETH_TP_MDI:
	ctrl = IP101A_G_AUTO_MDIX_DIS;
	break;
	case ETH_TP_MDI_X:
	ctrl = IP101A_G_AUTO_MDIX_DIS;
	ctrl2 = IP101A_G_FORCE_MDIX;
	break;
	case ETH_TP_MDI_AUTO:
	break;
	default:
	return 0;
	}

	oldpage = phy_select_page(phydev, IP101G_DEFAULT_PAGE);
	if (oldpage < 0)
	goto out;

	ret = __phy_modify(phydev, IP10XX_SPEC_CTRL_STATUS,
	IP101A_G_AUTO_MDIX_DIS, ctrl);
	if (ret)
	goto out;

	ret = __phy_modify(phydev, IP101A_G_PHY_SPEC_CTRL,
	IP101A_G_FORCE_MDIX, ctrl2);

	out:
	return phy_restore_page(phydev, oldpage, ret);
	}

	static int ip101a_g_config_aneg(struct phy_device *phydev)
	{
	int ret;

	ret = ip101a_g_config_mdix(phydev);
	if (ret)
	return ret;

	return genphy_config_aneg(phydev);
	}

	static int ip101a_g_ack_interrupt(struct phy_device *phydev)
	{
	int err;

	err = phy_read_paged(phydev, IP101G_DEFAULT_PAGE,
	IP101A_G_IRQ_CONF_STATUS);
	if (err < 0)
	return err;

	return 0;
	}

	static int ip101a_g_config_intr(struct phy_device *phydev)
	{
	u16 val;
	int err;

	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
	err = ip101a_g_ack_interrupt(phydev);
	if (err)
	return err;

	/* INTR pin used: Speed/link/duplex will cause an interrupt */
	val = IP101A_G_IRQ_PIN_USED;
	err = phy_write_paged(phydev, IP101G_DEFAULT_PAGE,
	IP101A_G_IRQ_CONF_STATUS, val);
	} else {
	val = IP101A_G_IRQ_ALL_MASK;
	err = phy_write_paged(phydev, IP101G_DEFAULT_PAGE,
	IP101A_G_IRQ_CONF_STATUS, val);
	if (err)
	return err;

	err = ip101a_g_ack_interrupt(phydev);
	}

	return err;
	}

	static irqreturn_t ip101a_g_handle_interrupt(struct phy_device *phydev)
	{
	int irq_status;

	irq_status = phy_read_paged(phydev, IP101G_DEFAULT_PAGE,
	IP101A_G_IRQ_CONF_STATUS);
	if (irq_status < 0) {
	phy_error(phydev);
	return IRQ_NONE;
	}

	if (!(irq_status & (IP101A_G_IRQ_SPEED_CHANGE \|
	IP101A_G_IRQ_DUPLEX_CHANGE \|
	IP101A_G_IRQ_LINK_CHANGE)))
	return IRQ_NONE;

	phy_trigger_machine(phydev);

	return IRQ_HANDLED;
	}

	/* The IP101A doesn't really have a page register. We just pretend to have one
	* so we can use the paged versions of the callbacks of the IP101G.
	*/
	static int ip101a_read_page(struct phy_device *phydev)
	{
	return IP101G_DEFAULT_PAGE;
	}

	static int ip101a_write_page(struct phy_device *phydev, int page)
	{
	WARN_ONCE(page != IP101G_DEFAULT_PAGE, "wrong page selected\n");

	return 0;
	}

	static int ip101g_read_page(struct phy_device *phydev)
	{
	return __phy_read(phydev, IP101G_PAGE_CONTROL);
	}

	static int ip101g_write_page(struct phy_device *phydev, int page)
	{
	return __phy_write(phydev, IP101G_PAGE_CONTROL, page);
	}

	static int ip101a_g_has_page_register(struct phy_device *phydev)
	{
	int oldval, val, ret;

	oldval = phy_read(phydev, IP101G_PAGE_CONTROL);
	if (oldval < 0)
	return oldval;

	ret = phy_write(phydev, IP101G_PAGE_CONTROL, 0xffff);
	if (ret)
	return ret;

	val = phy_read(phydev, IP101G_PAGE_CONTROL);
	if (val < 0)
	return val;

	ret = phy_write(phydev, IP101G_PAGE_CONTROL, oldval);
	if (ret)
	return ret;

	return val == IP101G_PAGE_CONTROL_MASK;
	}

	static int ip101a_g_match_phy_device(struct phy_device *phydev, bool ip101a)
	{
	int ret;

	if (phydev->phy_id != IP101A_PHY_ID)
	return 0;

	/* The IP101A and the IP101G share the same PHY identifier.The IP101G
	* seems to be a successor of the IP101A and implements more functions.
	* Amongst other things there is a page select register, which is not
	* available on the IP101A. Use this to distinguish these two.
	*/
	ret = ip101a_g_has_page_register(phydev);
	if (ret < 0)
	return ret;

	return ip101a == !ret;
	}

	static int ip101a_match_phy_device(struct phy_device *phydev)
	{
	return ip101a_g_match_phy_device(phydev, true);
	}

	static int ip101g_match_phy_device(struct phy_device *phydev)
	{
	return ip101a_g_match_phy_device(phydev, false);
	}

	static int ip101g_get_sset_count(struct phy_device *phydev)
	{
	return ARRAY_SIZE(ip101g_hw_stats);
	}

	static void ip101g_get_strings(struct phy_device phydev, u8 data)
	{
	int i;

	for (i = 0; i < ARRAY_SIZE(ip101g_hw_stats); i++)
	strscpy(data + i * ETH_GSTRING_LEN,
	ip101g_hw_stats[i].name, ETH_GSTRING_LEN);
	}

	static u64 ip101g_get_stat(struct phy_device *phydev, int i)
	{
	struct ip101g_hw_stat stat = ip101g_hw_stats[i];
	struct ip101a_g_phy_priv *priv = phydev->priv;
	int val;
	u64 ret;

	val = phy_read_paged(phydev, stat.page, IP101G_CNT_REG);
	if (val < 0) {
	ret = U64_MAX;
	} else {
	priv->stats[i] += val;
	ret = priv->stats[i];
	}

	return ret;
	}

	static void ip101g_get_stats(struct phy_device *phydev,
	struct ethtool_stats stats, u64 data)
	{
	int i;

	for (i = 0; i < ARRAY_SIZE(ip101g_hw_stats); i++)
	data[i] = ip101g_get_stat(phydev, i);
	}

	static struct phy_driver icplus_driver[] = {
	{
	PHY_ID_MATCH_MODEL(IP175C_PHY_ID),
	.name = "ICPlus IP175C",
	/* PHY_BASIC_FEATURES */
	.config_init = ip175c_config_init,
	.config_aneg = ip175c_config_aneg,
	.read_status = ip175c_read_status,
	.suspend = genphy_suspend,
	.resume = genphy_resume,
	}, {
	PHY_ID_MATCH_MODEL(IP1001_PHY_ID),
	.name = "ICPlus IP1001",
	/* PHY_GBIT_FEATURES */
	.config_init = ip1001_config_init,
	.soft_reset = genphy_soft_reset,
	.suspend = genphy_suspend,
	.resume = genphy_resume,
	}, {
	.name = "ICPlus IP101A",
	.match_phy_device = ip101a_match_phy_device,
	.probe = ip101a_g_probe,
	.read_page = ip101a_read_page,
	.write_page = ip101a_write_page,
	.config_intr = ip101a_g_config_intr,
	.handle_interrupt = ip101a_g_handle_interrupt,
	.config_init = ip101a_config_init,
	.config_aneg = ip101a_g_config_aneg,
	.read_status = ip101a_g_read_status,
	.soft_reset = genphy_soft_reset,
	.suspend = genphy_suspend,
	.resume = genphy_resume,
	}, {
	.name = "ICPlus IP101G",
	.match_phy_device = ip101g_match_phy_device,
	.probe = ip101a_g_probe,
	.read_page = ip101g_read_page,
	.write_page = ip101g_write_page,
	.config_intr = ip101a_g_config_intr,
	.handle_interrupt = ip101a_g_handle_interrupt,
	.config_init = ip101g_config_init,
	.config_aneg = ip101a_g_config_aneg,
	.read_status = ip101a_g_read_status,
	.soft_reset = genphy_soft_reset,
	.get_sset_count = ip101g_get_sset_count,
	.get_strings = ip101g_get_strings,
	.get_stats = ip101g_get_stats,
	.suspend = genphy_suspend,
	.resume = genphy_resume,
	} };

	module_phy_driver(icplus_driver);

	static struct mdio_device_id __maybe_unused icplus_tbl[] = {
	{ PHY_ID_MATCH_MODEL(IP175C_PHY_ID) },
	{ PHY_ID_MATCH_MODEL(IP1001_PHY_ID) },
	{ PHY_ID_MATCH_EXACT(IP101A_PHY_ID) },
	{ }
	};

	MODULE_DEVICE_TABLE(mdio, icplus_tbl);