| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Gmux driver for Apple laptops |
| * |
| * Copyright (C) Canonical Ltd. <seth.forshee@canonical.com> |
| * Copyright (C) 2010-2012 Andreas Heider <andreas@meetr.de> |
| * Copyright (C) 2015 Lukas Wunner <lukas@wunner.de> |
| * Copyright (C) 2023 Orlando Chamberlain <orlandoch.dev@gmail.com> |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/backlight.h> |
| #include <linux/acpi.h> |
| #include <linux/pnp.h> |
| #include <linux/apple-gmux.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/pci.h> |
| #include <linux/vga_switcheroo.h> |
| #include <linux/debugfs.h> |
| #include <acpi/video.h> |
| #include <asm/io.h> |
| |
| /** |
| * DOC: Overview |
| * |
| * gmux is a microcontroller built into the MacBook Pro to support dual GPUs: |
| * A `Lattice XP2`_ on pre-retinas, a `Renesas R4F2113`_ on pre-T2 retinas. |
| * |
| * On T2 Macbooks, the gmux is part of the T2 Coprocessor's SMC. The SMC has |
| * an I2C connection to a `NXP PCAL6524` GPIO expander, which enables/disables |
| * the voltage regulators of the discrete GPU, drives the display panel power, |
| * and has a GPIO to switch the eDP mux. The Intel CPU can interact with |
| * gmux through MMIO, similar to how the main SMC interface is controlled. |
| * |
| * (The MacPro6,1 2013 also has a gmux, however it is unclear why since it has |
| * dual GPUs but no built-in display.) |
| * |
| * gmux is connected to the LPC bus of the southbridge. Its I/O ports are |
| * accessed differently depending on the microcontroller: Driver functions |
| * to access a pre-retina gmux are infixed ``_pio_``, those for a pre-T2 |
| * retina gmux are infixed ``_index_``, and those on T2 Macs are infixed |
| * with ``_mmio_``. |
| * |
| * .. _Lattice XP2: |
| * http://www.latticesemi.com/en/Products/FPGAandCPLD/LatticeXP2.aspx |
| * .. _Renesas R4F2113: |
| * http://www.renesas.com/products/mpumcu/h8s/h8s2100/h8s2113/index.jsp |
| * .. _NXP PCAL6524: |
| * https://www.nxp.com/docs/en/data-sheet/PCAL6524.pdf |
| */ |
| |
| struct apple_gmux_config; |
| |
| struct apple_gmux_data { |
| u8 __iomem *iomem_base; |
| unsigned long iostart; |
| unsigned long iolen; |
| const struct apple_gmux_config *config; |
| struct mutex index_lock; |
| |
| struct backlight_device *bdev; |
| |
| /* switcheroo data */ |
| acpi_handle dhandle; |
| int gpe; |
| bool external_switchable; |
| enum vga_switcheroo_client_id switch_state_display; |
| enum vga_switcheroo_client_id switch_state_ddc; |
| enum vga_switcheroo_client_id switch_state_external; |
| enum vga_switcheroo_state power_state; |
| struct completion powerchange_done; |
| |
| /* debugfs data */ |
| u8 selected_port; |
| struct dentry *debug_dentry; |
| }; |
| |
| static struct apple_gmux_data *apple_gmux_data; |
| |
| struct apple_gmux_config { |
| u8 (*read8)(struct apple_gmux_data *gmux_data, int port); |
| void (*write8)(struct apple_gmux_data *gmux_data, int port, u8 val); |
| u32 (*read32)(struct apple_gmux_data *gmux_data, int port); |
| void (*write32)(struct apple_gmux_data *gmux_data, int port, u32 val); |
| const struct vga_switcheroo_handler *gmux_handler; |
| enum vga_switcheroo_handler_flags_t handler_flags; |
| unsigned long resource_type; |
| bool read_version_as_u32; |
| char *name; |
| }; |
| |
| #define GMUX_INTERRUPT_ENABLE 0xff |
| #define GMUX_INTERRUPT_DISABLE 0x00 |
| |
| #define GMUX_INTERRUPT_STATUS_ACTIVE 0 |
| #define GMUX_INTERRUPT_STATUS_DISPLAY (1 << 0) |
| #define GMUX_INTERRUPT_STATUS_POWER (1 << 2) |
| #define GMUX_INTERRUPT_STATUS_HOTPLUG (1 << 3) |
| |
| #define GMUX_BRIGHTNESS_MASK 0x00ffffff |
| #define GMUX_MAX_BRIGHTNESS GMUX_BRIGHTNESS_MASK |
| |
| # define MMIO_GMUX_MAX_BRIGHTNESS 0xffff |
| |
| static u8 gmux_pio_read8(struct apple_gmux_data *gmux_data, int port) |
| { |
| return inb(gmux_data->iostart + port); |
| } |
| |
| static void gmux_pio_write8(struct apple_gmux_data *gmux_data, int port, |
| u8 val) |
| { |
| outb(val, gmux_data->iostart + port); |
| } |
| |
| static u32 gmux_pio_read32(struct apple_gmux_data *gmux_data, int port) |
| { |
| return inl(gmux_data->iostart + port); |
| } |
| |
| static void gmux_pio_write32(struct apple_gmux_data *gmux_data, int port, |
| u32 val) |
| { |
| int i; |
| u8 tmpval; |
| |
| for (i = 0; i < 4; i++) { |
| tmpval = (val >> (i * 8)) & 0xff; |
| outb(tmpval, gmux_data->iostart + port + i); |
| } |
| } |
| |
| static int gmux_index_wait_ready(struct apple_gmux_data *gmux_data) |
| { |
| int i = 200; |
| u8 gwr = inb(gmux_data->iostart + GMUX_PORT_WRITE); |
| |
| while (i && (gwr & 0x01)) { |
| inb(gmux_data->iostart + GMUX_PORT_READ); |
| gwr = inb(gmux_data->iostart + GMUX_PORT_WRITE); |
| udelay(100); |
| i--; |
| } |
| |
| return !!i; |
| } |
| |
| static int gmux_index_wait_complete(struct apple_gmux_data *gmux_data) |
| { |
| int i = 200; |
| u8 gwr = inb(gmux_data->iostart + GMUX_PORT_WRITE); |
| |
| while (i && !(gwr & 0x01)) { |
| gwr = inb(gmux_data->iostart + GMUX_PORT_WRITE); |
| udelay(100); |
| i--; |
| } |
| |
| if (gwr & 0x01) |
| inb(gmux_data->iostart + GMUX_PORT_READ); |
| |
| return !!i; |
| } |
| |
| static u8 gmux_index_read8(struct apple_gmux_data *gmux_data, int port) |
| { |
| u8 val; |
| |
| mutex_lock(&gmux_data->index_lock); |
| gmux_index_wait_ready(gmux_data); |
| outb((port & 0xff), gmux_data->iostart + GMUX_PORT_READ); |
| gmux_index_wait_complete(gmux_data); |
| val = inb(gmux_data->iostart + GMUX_PORT_VALUE); |
| mutex_unlock(&gmux_data->index_lock); |
| |
| return val; |
| } |
| |
| static void gmux_index_write8(struct apple_gmux_data *gmux_data, int port, |
| u8 val) |
| { |
| mutex_lock(&gmux_data->index_lock); |
| outb(val, gmux_data->iostart + GMUX_PORT_VALUE); |
| gmux_index_wait_ready(gmux_data); |
| outb(port & 0xff, gmux_data->iostart + GMUX_PORT_WRITE); |
| gmux_index_wait_complete(gmux_data); |
| mutex_unlock(&gmux_data->index_lock); |
| } |
| |
| static u32 gmux_index_read32(struct apple_gmux_data *gmux_data, int port) |
| { |
| u32 val; |
| |
| mutex_lock(&gmux_data->index_lock); |
| gmux_index_wait_ready(gmux_data); |
| outb((port & 0xff), gmux_data->iostart + GMUX_PORT_READ); |
| gmux_index_wait_complete(gmux_data); |
| val = inl(gmux_data->iostart + GMUX_PORT_VALUE); |
| mutex_unlock(&gmux_data->index_lock); |
| |
| return val; |
| } |
| |
| static void gmux_index_write32(struct apple_gmux_data *gmux_data, int port, |
| u32 val) |
| { |
| int i; |
| u8 tmpval; |
| |
| mutex_lock(&gmux_data->index_lock); |
| |
| for (i = 0; i < 4; i++) { |
| tmpval = (val >> (i * 8)) & 0xff; |
| outb(tmpval, gmux_data->iostart + GMUX_PORT_VALUE + i); |
| } |
| |
| gmux_index_wait_ready(gmux_data); |
| outb(port & 0xff, gmux_data->iostart + GMUX_PORT_WRITE); |
| gmux_index_wait_complete(gmux_data); |
| mutex_unlock(&gmux_data->index_lock); |
| } |
| |
| static int gmux_mmio_wait(struct apple_gmux_data *gmux_data) |
| { |
| int i = 200; |
| u8 gwr = ioread8(gmux_data->iomem_base + GMUX_MMIO_COMMAND_SEND); |
| |
| while (i && gwr) { |
| gwr = ioread8(gmux_data->iomem_base + GMUX_MMIO_COMMAND_SEND); |
| udelay(100); |
| i--; |
| } |
| |
| return !!i; |
| } |
| |
| static u8 gmux_mmio_read8(struct apple_gmux_data *gmux_data, int port) |
| { |
| u8 val; |
| |
| mutex_lock(&gmux_data->index_lock); |
| gmux_mmio_wait(gmux_data); |
| iowrite8((port & 0xff), gmux_data->iomem_base + GMUX_MMIO_PORT_SELECT); |
| iowrite8(GMUX_MMIO_READ | sizeof(val), |
| gmux_data->iomem_base + GMUX_MMIO_COMMAND_SEND); |
| gmux_mmio_wait(gmux_data); |
| val = ioread8(gmux_data->iomem_base); |
| mutex_unlock(&gmux_data->index_lock); |
| |
| return val; |
| } |
| |
| static void gmux_mmio_write8(struct apple_gmux_data *gmux_data, int port, |
| u8 val) |
| { |
| mutex_lock(&gmux_data->index_lock); |
| gmux_mmio_wait(gmux_data); |
| iowrite8(val, gmux_data->iomem_base); |
| |
| iowrite8(port & 0xff, gmux_data->iomem_base + GMUX_MMIO_PORT_SELECT); |
| iowrite8(GMUX_MMIO_WRITE | sizeof(val), |
| gmux_data->iomem_base + GMUX_MMIO_COMMAND_SEND); |
| |
| gmux_mmio_wait(gmux_data); |
| mutex_unlock(&gmux_data->index_lock); |
| } |
| |
| static u32 gmux_mmio_read32(struct apple_gmux_data *gmux_data, int port) |
| { |
| u32 val; |
| |
| mutex_lock(&gmux_data->index_lock); |
| gmux_mmio_wait(gmux_data); |
| iowrite8((port & 0xff), gmux_data->iomem_base + GMUX_MMIO_PORT_SELECT); |
| iowrite8(GMUX_MMIO_READ | sizeof(val), |
| gmux_data->iomem_base + GMUX_MMIO_COMMAND_SEND); |
| gmux_mmio_wait(gmux_data); |
| val = ioread32be(gmux_data->iomem_base); |
| mutex_unlock(&gmux_data->index_lock); |
| |
| return val; |
| } |
| |
| static void gmux_mmio_write32(struct apple_gmux_data *gmux_data, int port, |
| u32 val) |
| { |
| mutex_lock(&gmux_data->index_lock); |
| iowrite32be(val, gmux_data->iomem_base); |
| iowrite8(port & 0xff, gmux_data->iomem_base + GMUX_MMIO_PORT_SELECT); |
| iowrite8(GMUX_MMIO_WRITE | sizeof(val), |
| gmux_data->iomem_base + GMUX_MMIO_COMMAND_SEND); |
| gmux_mmio_wait(gmux_data); |
| mutex_unlock(&gmux_data->index_lock); |
| } |
| |
| static u8 gmux_read8(struct apple_gmux_data *gmux_data, int port) |
| { |
| return gmux_data->config->read8(gmux_data, port); |
| } |
| |
| static void gmux_write8(struct apple_gmux_data *gmux_data, int port, u8 val) |
| { |
| return gmux_data->config->write8(gmux_data, port, val); |
| } |
| |
| static u32 gmux_read32(struct apple_gmux_data *gmux_data, int port) |
| { |
| return gmux_data->config->read32(gmux_data, port); |
| } |
| |
| static void gmux_write32(struct apple_gmux_data *gmux_data, int port, |
| u32 val) |
| { |
| return gmux_data->config->write32(gmux_data, port, val); |
| } |
| |
| /** |
| * DOC: Backlight control |
| * |
| * On single GPU MacBooks, the PWM signal for the backlight is generated by |
| * the GPU. On dual GPU MacBook Pros by contrast, either GPU may be suspended |
| * to conserve energy. Hence the PWM signal needs to be generated by a separate |
| * backlight driver which is controlled by gmux. The earliest generation |
| * MBP5 2008/09 uses a `TI LP8543`_ backlight driver. Newer models |
| * use a `TI LP8545`_ or a TI LP8548. |
| * |
| * .. _TI LP8543: https://www.ti.com/lit/ds/symlink/lp8543.pdf |
| * .. _TI LP8545: https://www.ti.com/lit/ds/symlink/lp8545.pdf |
| */ |
| |
| static int gmux_get_brightness(struct backlight_device *bd) |
| { |
| struct apple_gmux_data *gmux_data = bl_get_data(bd); |
| return gmux_read32(gmux_data, GMUX_PORT_BRIGHTNESS) & |
| GMUX_BRIGHTNESS_MASK; |
| } |
| |
| static int gmux_update_status(struct backlight_device *bd) |
| { |
| struct apple_gmux_data *gmux_data = bl_get_data(bd); |
| u32 brightness = backlight_get_brightness(bd); |
| |
| gmux_write32(gmux_data, GMUX_PORT_BRIGHTNESS, brightness); |
| |
| return 0; |
| } |
| |
| static const struct backlight_ops gmux_bl_ops = { |
| .options = BL_CORE_SUSPENDRESUME, |
| .get_brightness = gmux_get_brightness, |
| .update_status = gmux_update_status, |
| }; |
| |
| /** |
| * DOC: Graphics mux |
| * |
| * On pre-retinas, the LVDS outputs of both GPUs feed into gmux which muxes |
| * either of them to the panel. One of the tricks gmux has up its sleeve is |
| * to lengthen the blanking interval of its output during a switch to |
| * synchronize it with the GPU switched to. This allows for a flicker-free |
| * switch that is imperceptible by the user (`US 8,687,007 B2`_). |
| * |
| * On retinas, muxing is no longer done by gmux itself, but by a separate |
| * chip which is controlled by gmux. The chip is triple sourced, it is |
| * either an `NXP CBTL06142`_, `TI HD3SS212`_ or `Pericom PI3VDP12412`_. |
| * The panel is driven with eDP instead of LVDS since the pixel clock |
| * required for retina resolution exceeds LVDS' limits. |
| * |
| * Pre-retinas are able to switch the panel's DDC pins separately. |
| * This is handled by a `TI SN74LV4066A`_ which is controlled by gmux. |
| * The inactive GPU can thus probe the panel's EDID without switching over |
| * the entire panel. Retinas lack this functionality as the chips used for |
| * eDP muxing are incapable of switching the AUX channel separately (see |
| * the linked data sheets, Pericom would be capable but this is unused). |
| * However the retina panel has the NO_AUX_HANDSHAKE_LINK_TRAINING bit set |
| * in its DPCD, allowing the inactive GPU to skip the AUX handshake and |
| * set up the output with link parameters pre-calibrated by the active GPU. |
| * |
| * The external DP port is only fully switchable on the first two unibody |
| * MacBook Pro generations, MBP5 2008/09 and MBP6 2010. This is done by an |
| * `NXP CBTL06141`_ which is controlled by gmux. It's the predecessor of the |
| * eDP mux on retinas, the difference being support for 2.7 versus 5.4 Gbit/s. |
| * |
| * The following MacBook Pro generations replaced the external DP port with a |
| * combined DP/Thunderbolt port and lost the ability to switch it between GPUs, |
| * connecting it either to the discrete GPU or the Thunderbolt controller. |
| * Oddly enough, while the full port is no longer switchable, AUX and HPD |
| * are still switchable by way of an `NXP CBTL03062`_ (on pre-retinas |
| * MBP8 2011 and MBP9 2012) or two `TI TS3DS10224`_ (on pre-t2 retinas) under |
| * the control of gmux. Since the integrated GPU is missing the main link, |
| * external displays appear to it as phantoms which fail to link-train. |
| * |
| * gmux receives the HPD signal of all display connectors and sends an |
| * interrupt on hotplug. On generations which cannot switch external ports, |
| * the discrete GPU can then be woken to drive the newly connected display. |
| * The ability to switch AUX on these generations could be used to improve |
| * reliability of hotplug detection by having the integrated GPU poll the |
| * ports while the discrete GPU is asleep, but currently we do not make use |
| * of this feature. |
| * |
| * Our switching policy for the external port is that on those generations |
| * which are able to switch it fully, the port is switched together with the |
| * panel when IGD / DIS commands are issued to vga_switcheroo. It is thus |
| * possible to drive e.g. a beamer on battery power with the integrated GPU. |
| * The user may manually switch to the discrete GPU if more performance is |
| * needed. |
| * |
| * On all newer generations, the external port can only be driven by the |
| * discrete GPU. If a display is plugged in while the panel is switched to |
| * the integrated GPU, *both* GPUs will be in use for maximum performance. |
| * To decrease power consumption, the user may manually switch to the |
| * discrete GPU, thereby suspending the integrated GPU. |
| * |
| * gmux' initial switch state on bootup is user configurable via the EFI |
| * variable ``gpu-power-prefs-fa4ce28d-b62f-4c99-9cc3-6815686e30f9`` (5th byte, |
| * 1 = IGD, 0 = DIS). Based on this setting, the EFI firmware tells gmux to |
| * switch the panel and the external DP connector and allocates a framebuffer |
| * for the selected GPU. |
| * |
| * .. _US 8,687,007 B2: https://pimg-fpiw.uspto.gov/fdd/07/870/086/0.pdf |
| * .. _NXP CBTL06141: https://www.nxp.com/documents/data_sheet/CBTL06141.pdf |
| * .. _NXP CBTL06142: https://www.nxp.com/documents/data_sheet/CBTL06141.pdf |
| * .. _TI HD3SS212: https://www.ti.com/lit/ds/symlink/hd3ss212.pdf |
| * .. _Pericom PI3VDP12412: https://www.pericom.com/assets/Datasheets/PI3VDP12412.pdf |
| * .. _TI SN74LV4066A: https://www.ti.com/lit/ds/symlink/sn74lv4066a.pdf |
| * .. _NXP CBTL03062: http://pdf.datasheetarchive.com/indexerfiles/Datasheets-SW16/DSASW00308511.pdf |
| * .. _TI TS3DS10224: https://www.ti.com/lit/ds/symlink/ts3ds10224.pdf |
| */ |
| |
| static void gmux_read_switch_state(struct apple_gmux_data *gmux_data) |
| { |
| if (gmux_read8(gmux_data, GMUX_PORT_SWITCH_DDC) == 1) |
| gmux_data->switch_state_ddc = VGA_SWITCHEROO_IGD; |
| else |
| gmux_data->switch_state_ddc = VGA_SWITCHEROO_DIS; |
| |
| if (gmux_read8(gmux_data, GMUX_PORT_SWITCH_DISPLAY) & 1) |
| gmux_data->switch_state_display = VGA_SWITCHEROO_DIS; |
| else |
| gmux_data->switch_state_display = VGA_SWITCHEROO_IGD; |
| |
| if (gmux_read8(gmux_data, GMUX_PORT_SWITCH_EXTERNAL) == 2) |
| gmux_data->switch_state_external = VGA_SWITCHEROO_IGD; |
| else |
| gmux_data->switch_state_external = VGA_SWITCHEROO_DIS; |
| } |
| |
| static void gmux_write_switch_state(struct apple_gmux_data *gmux_data) |
| { |
| if (gmux_data->switch_state_ddc == VGA_SWITCHEROO_IGD) |
| gmux_write8(gmux_data, GMUX_PORT_SWITCH_DDC, 1); |
| else |
| gmux_write8(gmux_data, GMUX_PORT_SWITCH_DDC, 2); |
| |
| if (gmux_data->switch_state_display == VGA_SWITCHEROO_IGD) |
| gmux_write8(gmux_data, GMUX_PORT_SWITCH_DISPLAY, 2); |
| else |
| gmux_write8(gmux_data, GMUX_PORT_SWITCH_DISPLAY, 3); |
| |
| if (gmux_data->switch_state_external == VGA_SWITCHEROO_IGD) |
| gmux_write8(gmux_data, GMUX_PORT_SWITCH_EXTERNAL, 2); |
| else |
| gmux_write8(gmux_data, GMUX_PORT_SWITCH_EXTERNAL, 3); |
| } |
| |
| static int gmux_switchto(enum vga_switcheroo_client_id id) |
| { |
| apple_gmux_data->switch_state_ddc = id; |
| apple_gmux_data->switch_state_display = id; |
| if (apple_gmux_data->external_switchable) |
| apple_gmux_data->switch_state_external = id; |
| |
| gmux_write_switch_state(apple_gmux_data); |
| |
| return 0; |
| } |
| |
| static int gmux_switch_ddc(enum vga_switcheroo_client_id id) |
| { |
| enum vga_switcheroo_client_id old_ddc_owner = |
| apple_gmux_data->switch_state_ddc; |
| |
| if (id == old_ddc_owner) |
| return id; |
| |
| pr_debug("Switching DDC from %d to %d\n", old_ddc_owner, id); |
| apple_gmux_data->switch_state_ddc = id; |
| |
| if (id == VGA_SWITCHEROO_IGD) |
| gmux_write8(apple_gmux_data, GMUX_PORT_SWITCH_DDC, 1); |
| else |
| gmux_write8(apple_gmux_data, GMUX_PORT_SWITCH_DDC, 2); |
| |
| return old_ddc_owner; |
| } |
| |
| /** |
| * DOC: Power control |
| * |
| * gmux is able to cut power to the discrete GPU. It automatically takes care |
| * of the correct sequence to tear down and bring up the power rails for |
| * core voltage, VRAM and PCIe. |
| */ |
| |
| static int gmux_set_discrete_state(struct apple_gmux_data *gmux_data, |
| enum vga_switcheroo_state state) |
| { |
| reinit_completion(&gmux_data->powerchange_done); |
| |
| if (state == VGA_SWITCHEROO_ON) { |
| gmux_write8(gmux_data, GMUX_PORT_DISCRETE_POWER, 1); |
| gmux_write8(gmux_data, GMUX_PORT_DISCRETE_POWER, 3); |
| pr_debug("Discrete card powered up\n"); |
| } else { |
| gmux_write8(gmux_data, GMUX_PORT_DISCRETE_POWER, 1); |
| gmux_write8(gmux_data, GMUX_PORT_DISCRETE_POWER, 0); |
| pr_debug("Discrete card powered down\n"); |
| } |
| |
| gmux_data->power_state = state; |
| |
| if (gmux_data->gpe >= 0 && |
| !wait_for_completion_interruptible_timeout(&gmux_data->powerchange_done, |
| msecs_to_jiffies(200))) |
| pr_warn("Timeout waiting for gmux switch to complete\n"); |
| |
| return 0; |
| } |
| |
| static int gmux_set_power_state(enum vga_switcheroo_client_id id, |
| enum vga_switcheroo_state state) |
| { |
| if (id == VGA_SWITCHEROO_IGD) |
| return 0; |
| |
| return gmux_set_discrete_state(apple_gmux_data, state); |
| } |
| |
| static enum vga_switcheroo_client_id gmux_get_client_id(struct pci_dev *pdev) |
| { |
| /* |
| * Early Macbook Pros with switchable graphics use nvidia |
| * integrated graphics. Hardcode that the 9400M is integrated. |
| */ |
| if (pdev->vendor == PCI_VENDOR_ID_INTEL) |
| return VGA_SWITCHEROO_IGD; |
| else if (pdev->vendor == PCI_VENDOR_ID_NVIDIA && |
| pdev->device == 0x0863) |
| return VGA_SWITCHEROO_IGD; |
| else |
| return VGA_SWITCHEROO_DIS; |
| } |
| |
| static const struct vga_switcheroo_handler gmux_handler_no_ddc = { |
| .switchto = gmux_switchto, |
| .power_state = gmux_set_power_state, |
| .get_client_id = gmux_get_client_id, |
| }; |
| |
| static const struct vga_switcheroo_handler gmux_handler_ddc = { |
| .switchto = gmux_switchto, |
| .switch_ddc = gmux_switch_ddc, |
| .power_state = gmux_set_power_state, |
| .get_client_id = gmux_get_client_id, |
| }; |
| |
| static const struct apple_gmux_config apple_gmux_pio = { |
| .read8 = &gmux_pio_read8, |
| .write8 = &gmux_pio_write8, |
| .read32 = &gmux_pio_read32, |
| .write32 = &gmux_pio_write32, |
| .gmux_handler = &gmux_handler_ddc, |
| .handler_flags = VGA_SWITCHEROO_CAN_SWITCH_DDC, |
| .resource_type = IORESOURCE_IO, |
| .read_version_as_u32 = false, |
| .name = "classic" |
| }; |
| |
| static const struct apple_gmux_config apple_gmux_index = { |
| .read8 = &gmux_index_read8, |
| .write8 = &gmux_index_write8, |
| .read32 = &gmux_index_read32, |
| .write32 = &gmux_index_write32, |
| .gmux_handler = &gmux_handler_no_ddc, |
| .handler_flags = VGA_SWITCHEROO_NEEDS_EDP_CONFIG, |
| .resource_type = IORESOURCE_IO, |
| .read_version_as_u32 = true, |
| .name = "indexed" |
| }; |
| |
| static const struct apple_gmux_config apple_gmux_mmio = { |
| .read8 = &gmux_mmio_read8, |
| .write8 = &gmux_mmio_write8, |
| .read32 = &gmux_mmio_read32, |
| .write32 = &gmux_mmio_write32, |
| .gmux_handler = &gmux_handler_no_ddc, |
| .handler_flags = VGA_SWITCHEROO_NEEDS_EDP_CONFIG, |
| .resource_type = IORESOURCE_MEM, |
| .read_version_as_u32 = true, |
| .name = "T2" |
| }; |
| |
| |
| /** |
| * DOC: Interrupt |
| * |
| * gmux is also connected to a GPIO pin of the southbridge and thereby is able |
| * to trigger an ACPI GPE. ACPI name GMGP holds this GPIO pin's number. On the |
| * MBP5 2008/09 it's GPIO pin 22 of the Nvidia MCP79, on following generations |
| * it's GPIO pin 6 of the Intel PCH, on MMIO gmux's it's pin 21. |
| * |
| * The GPE merely signals that an interrupt occurred, the actual type of event |
| * is identified by reading a gmux register. |
| * |
| * In addition to the GMGP name, gmux's ACPI device also has two methods GMSP |
| * and GMLV. GMLV likely means "GMUX Level", and reads the value of the GPIO, |
| * while GMSP likely means "GMUX Set Polarity", and seems to write to the GPIO's |
| * value. On newer Macbooks (This was introduced with or sometime before the |
| * MacBookPro14,3), the ACPI GPE method differentiates between the OS type: On |
| * Darwin, only a notification is signaled, whereas on other OSes, the GPIO's |
| * value is read and then inverted. |
| * |
| * Because Linux masquerades as Darwin, it ends up in the notification-only code |
| * path. On MMIO gmux's, this seems to lead to us being unable to clear interrupts, |
| * unless we call GMSP(0). Without this, there is a flood of status=0 interrupts |
| * that can't be cleared. This issue seems to be unique to MMIO gmux's. |
| */ |
| |
| static inline void gmux_disable_interrupts(struct apple_gmux_data *gmux_data) |
| { |
| gmux_write8(gmux_data, GMUX_PORT_INTERRUPT_ENABLE, |
| GMUX_INTERRUPT_DISABLE); |
| } |
| |
| static inline void gmux_enable_interrupts(struct apple_gmux_data *gmux_data) |
| { |
| gmux_write8(gmux_data, GMUX_PORT_INTERRUPT_ENABLE, |
| GMUX_INTERRUPT_ENABLE); |
| } |
| |
| static inline u8 gmux_interrupt_get_status(struct apple_gmux_data *gmux_data) |
| { |
| return gmux_read8(gmux_data, GMUX_PORT_INTERRUPT_STATUS); |
| } |
| |
| static void gmux_clear_interrupts(struct apple_gmux_data *gmux_data) |
| { |
| u8 status; |
| |
| /* to clear interrupts write back current status */ |
| status = gmux_interrupt_get_status(gmux_data); |
| gmux_write8(gmux_data, GMUX_PORT_INTERRUPT_STATUS, status); |
| /* Prevent flood of status=0 interrupts */ |
| if (gmux_data->config == &apple_gmux_mmio) |
| acpi_execute_simple_method(gmux_data->dhandle, "GMSP", 0); |
| } |
| |
| static void gmux_notify_handler(acpi_handle device, u32 value, void *context) |
| { |
| u8 status; |
| struct pnp_dev *pnp = (struct pnp_dev *)context; |
| struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp); |
| |
| status = gmux_interrupt_get_status(gmux_data); |
| gmux_disable_interrupts(gmux_data); |
| pr_debug("Notify handler called: status %d\n", status); |
| |
| gmux_clear_interrupts(gmux_data); |
| gmux_enable_interrupts(gmux_data); |
| |
| if (status & GMUX_INTERRUPT_STATUS_POWER) |
| complete(&gmux_data->powerchange_done); |
| } |
| |
| /** |
| * DOC: Debugfs Interface |
| * |
| * gmux ports can be accessed from userspace as a debugfs interface. For example: |
| * |
| * # echo 4 > /sys/kernel/debug/apple_gmux/selected_port |
| * # cat /sys/kernel/debug/apple_gmux/selected_port_data | xxd -p |
| * 00000005 |
| * |
| * Reads 4 bytes from port 4 (GMUX_PORT_VERSION_MAJOR). |
| * |
| * 1 and 4 byte writes are also allowed. |
| */ |
| |
| static ssize_t gmux_selected_port_data_write(struct file *file, |
| const char __user *userbuf, size_t count, loff_t *ppos) |
| { |
| struct apple_gmux_data *gmux_data = file->private_data; |
| |
| if (*ppos) |
| return -EINVAL; |
| |
| if (count == 1) { |
| u8 data; |
| |
| if (copy_from_user(&data, userbuf, 1)) |
| return -EFAULT; |
| |
| gmux_write8(gmux_data, gmux_data->selected_port, data); |
| } else if (count == 4) { |
| u32 data; |
| |
| if (copy_from_user(&data, userbuf, 4)) |
| return -EFAULT; |
| |
| gmux_write32(gmux_data, gmux_data->selected_port, data); |
| } else |
| return -EINVAL; |
| |
| return count; |
| } |
| |
| static ssize_t gmux_selected_port_data_read(struct file *file, |
| char __user *userbuf, size_t count, loff_t *ppos) |
| { |
| struct apple_gmux_data *gmux_data = file->private_data; |
| u32 data; |
| |
| data = gmux_read32(gmux_data, gmux_data->selected_port); |
| |
| return simple_read_from_buffer(userbuf, count, ppos, &data, sizeof(data)); |
| } |
| |
| static const struct file_operations gmux_port_data_ops = { |
| .open = simple_open, |
| .write = gmux_selected_port_data_write, |
| .read = gmux_selected_port_data_read |
| }; |
| |
| static void gmux_init_debugfs(struct apple_gmux_data *gmux_data) |
| { |
| gmux_data->debug_dentry = debugfs_create_dir(KBUILD_MODNAME, NULL); |
| |
| debugfs_create_u8("selected_port", 0644, gmux_data->debug_dentry, |
| &gmux_data->selected_port); |
| debugfs_create_file("selected_port_data", 0644, gmux_data->debug_dentry, |
| gmux_data, &gmux_port_data_ops); |
| } |
| |
| static void gmux_fini_debugfs(struct apple_gmux_data *gmux_data) |
| { |
| debugfs_remove_recursive(gmux_data->debug_dentry); |
| } |
| |
| static int gmux_suspend(struct device *dev) |
| { |
| struct pnp_dev *pnp = to_pnp_dev(dev); |
| struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp); |
| |
| gmux_disable_interrupts(gmux_data); |
| return 0; |
| } |
| |
| static int gmux_resume(struct device *dev) |
| { |
| struct pnp_dev *pnp = to_pnp_dev(dev); |
| struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp); |
| |
| gmux_enable_interrupts(gmux_data); |
| gmux_write_switch_state(gmux_data); |
| if (gmux_data->power_state == VGA_SWITCHEROO_OFF) |
| gmux_set_discrete_state(gmux_data, gmux_data->power_state); |
| return 0; |
| } |
| |
| static int is_thunderbolt(struct device *dev, void *data) |
| { |
| return to_pci_dev(dev)->is_thunderbolt; |
| } |
| |
| static int gmux_probe(struct pnp_dev *pnp, const struct pnp_device_id *id) |
| { |
| struct apple_gmux_data *gmux_data; |
| struct resource *res; |
| struct backlight_properties props; |
| struct backlight_device *bdev = NULL; |
| u8 ver_major, ver_minor, ver_release; |
| bool register_bdev = true; |
| int ret = -ENXIO; |
| acpi_status status; |
| unsigned long long gpe; |
| enum apple_gmux_type type; |
| u32 version; |
| |
| if (apple_gmux_data) |
| return -EBUSY; |
| |
| if (!apple_gmux_detect(pnp, &type)) { |
| pr_info("gmux device not present\n"); |
| return -ENODEV; |
| } |
| |
| gmux_data = kzalloc(sizeof(*gmux_data), GFP_KERNEL); |
| if (!gmux_data) |
| return -ENOMEM; |
| pnp_set_drvdata(pnp, gmux_data); |
| |
| switch (type) { |
| case APPLE_GMUX_TYPE_MMIO: |
| gmux_data->config = &apple_gmux_mmio; |
| mutex_init(&gmux_data->index_lock); |
| |
| res = pnp_get_resource(pnp, IORESOURCE_MEM, 0); |
| gmux_data->iostart = res->start; |
| /* Although the ACPI table only allocates 8 bytes, we need 16. */ |
| gmux_data->iolen = 16; |
| if (!request_mem_region(gmux_data->iostart, gmux_data->iolen, |
| "Apple gmux")) { |
| pr_err("gmux I/O already in use\n"); |
| goto err_free; |
| } |
| gmux_data->iomem_base = ioremap(gmux_data->iostart, gmux_data->iolen); |
| if (!gmux_data->iomem_base) { |
| pr_err("couldn't remap gmux mmio region"); |
| goto err_release; |
| } |
| goto get_version; |
| case APPLE_GMUX_TYPE_INDEXED: |
| gmux_data->config = &apple_gmux_index; |
| mutex_init(&gmux_data->index_lock); |
| break; |
| case APPLE_GMUX_TYPE_PIO: |
| gmux_data->config = &apple_gmux_pio; |
| break; |
| } |
| |
| res = pnp_get_resource(pnp, IORESOURCE_IO, 0); |
| gmux_data->iostart = res->start; |
| gmux_data->iolen = resource_size(res); |
| |
| if (!request_region(gmux_data->iostart, gmux_data->iolen, |
| "Apple gmux")) { |
| pr_err("gmux I/O already in use\n"); |
| goto err_free; |
| } |
| |
| get_version: |
| if (gmux_data->config->read_version_as_u32) { |
| version = gmux_read32(gmux_data, GMUX_PORT_VERSION_MAJOR); |
| ver_major = (version >> 24) & 0xff; |
| ver_minor = (version >> 16) & 0xff; |
| ver_release = (version >> 8) & 0xff; |
| } else { |
| ver_major = gmux_read8(gmux_data, GMUX_PORT_VERSION_MAJOR); |
| ver_minor = gmux_read8(gmux_data, GMUX_PORT_VERSION_MINOR); |
| ver_release = gmux_read8(gmux_data, GMUX_PORT_VERSION_RELEASE); |
| } |
| pr_info("Found gmux version %d.%d.%d [%s]\n", ver_major, ver_minor, |
| ver_release, gmux_data->config->name); |
| |
| memset(&props, 0, sizeof(props)); |
| props.type = BACKLIGHT_PLATFORM; |
| |
| /* |
| * All MMIO gmux's have 0xffff as max brightness, but some iMacs incorrectly |
| * report 0x03ff, despite the firmware being happy to set 0xffff as the brightness |
| * at boot. Force 0xffff for all MMIO gmux's so they all have the correct brightness |
| * range. |
| */ |
| if (type == APPLE_GMUX_TYPE_MMIO) |
| props.max_brightness = MMIO_GMUX_MAX_BRIGHTNESS; |
| else |
| props.max_brightness = gmux_read32(gmux_data, GMUX_PORT_MAX_BRIGHTNESS); |
| |
| #if IS_REACHABLE(CONFIG_ACPI_VIDEO) |
| register_bdev = acpi_video_get_backlight_type() == acpi_backlight_apple_gmux; |
| #endif |
| if (register_bdev) { |
| /* |
| * Currently it's assumed that the maximum brightness is less than |
| * 2^24 for compatibility with old gmux versions. Cap the max |
| * brightness at this value, but print a warning if the hardware |
| * reports something higher so that it can be fixed. |
| */ |
| if (WARN_ON(props.max_brightness > GMUX_MAX_BRIGHTNESS)) |
| props.max_brightness = GMUX_MAX_BRIGHTNESS; |
| |
| bdev = backlight_device_register("gmux_backlight", &pnp->dev, |
| gmux_data, &gmux_bl_ops, &props); |
| if (IS_ERR(bdev)) { |
| ret = PTR_ERR(bdev); |
| goto err_unmap; |
| } |
| |
| gmux_data->bdev = bdev; |
| bdev->props.brightness = gmux_get_brightness(bdev); |
| backlight_update_status(bdev); |
| } |
| |
| gmux_data->power_state = VGA_SWITCHEROO_ON; |
| |
| gmux_data->dhandle = ACPI_HANDLE(&pnp->dev); |
| if (!gmux_data->dhandle) { |
| pr_err("Cannot find acpi handle for pnp device %s\n", |
| dev_name(&pnp->dev)); |
| ret = -ENODEV; |
| goto err_notify; |
| } |
| |
| status = acpi_evaluate_integer(gmux_data->dhandle, "GMGP", NULL, &gpe); |
| if (ACPI_SUCCESS(status)) { |
| gmux_data->gpe = (int)gpe; |
| |
| status = acpi_install_notify_handler(gmux_data->dhandle, |
| ACPI_DEVICE_NOTIFY, |
| &gmux_notify_handler, pnp); |
| if (ACPI_FAILURE(status)) { |
| pr_err("Install notify handler failed: %s\n", |
| acpi_format_exception(status)); |
| ret = -ENODEV; |
| goto err_notify; |
| } |
| |
| status = acpi_enable_gpe(NULL, gmux_data->gpe); |
| if (ACPI_FAILURE(status)) { |
| pr_err("Cannot enable gpe: %s\n", |
| acpi_format_exception(status)); |
| goto err_enable_gpe; |
| } |
| } else { |
| pr_warn("No GPE found for gmux\n"); |
| gmux_data->gpe = -1; |
| } |
| |
| /* |
| * If Thunderbolt is present, the external DP port is not fully |
| * switchable. Force its AUX channel to the discrete GPU. |
| */ |
| gmux_data->external_switchable = |
| !bus_for_each_dev(&pci_bus_type, NULL, NULL, is_thunderbolt); |
| if (!gmux_data->external_switchable) |
| gmux_write8(gmux_data, GMUX_PORT_SWITCH_EXTERNAL, 3); |
| |
| apple_gmux_data = gmux_data; |
| init_completion(&gmux_data->powerchange_done); |
| gmux_enable_interrupts(gmux_data); |
| gmux_read_switch_state(gmux_data); |
| |
| /* |
| * Retina MacBook Pros cannot switch the panel's AUX separately |
| * and need eDP pre-calibration. They are distinguishable from |
| * pre-retinas by having an "indexed" or "T2" gmux. |
| * |
| * Pre-retina MacBook Pros can switch the panel's DDC separately. |
| */ |
| ret = vga_switcheroo_register_handler(gmux_data->config->gmux_handler, |
| gmux_data->config->handler_flags); |
| if (ret) { |
| pr_err("Failed to register vga_switcheroo handler\n"); |
| goto err_register_handler; |
| } |
| |
| gmux_init_debugfs(gmux_data); |
| return 0; |
| |
| err_register_handler: |
| gmux_disable_interrupts(gmux_data); |
| apple_gmux_data = NULL; |
| if (gmux_data->gpe >= 0) |
| acpi_disable_gpe(NULL, gmux_data->gpe); |
| err_enable_gpe: |
| if (gmux_data->gpe >= 0) |
| acpi_remove_notify_handler(gmux_data->dhandle, |
| ACPI_DEVICE_NOTIFY, |
| &gmux_notify_handler); |
| err_notify: |
| backlight_device_unregister(bdev); |
| err_unmap: |
| if (gmux_data->iomem_base) |
| iounmap(gmux_data->iomem_base); |
| err_release: |
| if (gmux_data->config->resource_type == IORESOURCE_MEM) |
| release_mem_region(gmux_data->iostart, gmux_data->iolen); |
| else |
| release_region(gmux_data->iostart, gmux_data->iolen); |
| err_free: |
| kfree(gmux_data); |
| return ret; |
| } |
| |
| static void gmux_remove(struct pnp_dev *pnp) |
| { |
| struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp); |
| |
| gmux_fini_debugfs(gmux_data); |
| vga_switcheroo_unregister_handler(); |
| gmux_disable_interrupts(gmux_data); |
| if (gmux_data->gpe >= 0) { |
| acpi_disable_gpe(NULL, gmux_data->gpe); |
| acpi_remove_notify_handler(gmux_data->dhandle, |
| ACPI_DEVICE_NOTIFY, |
| &gmux_notify_handler); |
| } |
| |
| backlight_device_unregister(gmux_data->bdev); |
| |
| if (gmux_data->iomem_base) { |
| iounmap(gmux_data->iomem_base); |
| release_mem_region(gmux_data->iostart, gmux_data->iolen); |
| } else |
| release_region(gmux_data->iostart, gmux_data->iolen); |
| apple_gmux_data = NULL; |
| kfree(gmux_data); |
| } |
| |
| static const struct pnp_device_id gmux_device_ids[] = { |
| {GMUX_ACPI_HID, 0}, |
| {"", 0} |
| }; |
| |
| static const struct dev_pm_ops gmux_dev_pm_ops = { |
| .suspend = gmux_suspend, |
| .resume = gmux_resume, |
| }; |
| |
| static struct pnp_driver gmux_pnp_driver = { |
| .name = "apple-gmux", |
| .probe = gmux_probe, |
| .remove = gmux_remove, |
| .id_table = gmux_device_ids, |
| .driver = { |
| .pm = &gmux_dev_pm_ops, |
| }, |
| }; |
| |
| module_pnp_driver(gmux_pnp_driver); |
| MODULE_AUTHOR("Seth Forshee <seth.forshee@canonical.com>"); |
| MODULE_DESCRIPTION("Apple Gmux Driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DEVICE_TABLE(pnp, gmux_device_ids); |