| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Helpers for controlling modem lines via GPIO |
| * |
| * Copyright (C) 2014 Paratronic S.A. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/device.h> |
| #include <linux/irq.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/termios.h> |
| #include <linux/serial_core.h> |
| #include <linux/module.h> |
| #include <linux/property.h> |
| |
| #include "serial_mctrl_gpio.h" |
| |
| struct mctrl_gpios { |
| struct uart_port *port; |
| struct gpio_desc *gpio[UART_GPIO_MAX]; |
| int irq[UART_GPIO_MAX]; |
| unsigned int mctrl_prev; |
| bool mctrl_on; |
| }; |
| |
| static const struct { |
| const char *name; |
| unsigned int mctrl; |
| enum gpiod_flags flags; |
| } mctrl_gpios_desc[UART_GPIO_MAX] = { |
| { "cts", TIOCM_CTS, GPIOD_IN, }, |
| { "dsr", TIOCM_DSR, GPIOD_IN, }, |
| { "dcd", TIOCM_CD, GPIOD_IN, }, |
| { "rng", TIOCM_RNG, GPIOD_IN, }, |
| { "rts", TIOCM_RTS, GPIOD_OUT_LOW, }, |
| { "dtr", TIOCM_DTR, GPIOD_OUT_LOW, }, |
| }; |
| |
| static bool mctrl_gpio_flags_is_dir_out(unsigned int idx) |
| { |
| return mctrl_gpios_desc[idx].flags & GPIOD_FLAGS_BIT_DIR_OUT; |
| } |
| |
| /** |
| * mctrl_gpio_set - set gpios according to mctrl state |
| * @gpios: gpios to set |
| * @mctrl: state to set |
| * |
| * Set the gpios according to the mctrl state. |
| */ |
| void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl) |
| { |
| enum mctrl_gpio_idx i; |
| struct gpio_desc *desc_array[UART_GPIO_MAX]; |
| DECLARE_BITMAP(values, UART_GPIO_MAX); |
| unsigned int count = 0; |
| |
| if (gpios == NULL) |
| return; |
| |
| for (i = 0; i < UART_GPIO_MAX; i++) |
| if (gpios->gpio[i] && mctrl_gpio_flags_is_dir_out(i)) { |
| desc_array[count] = gpios->gpio[i]; |
| __assign_bit(count, values, |
| mctrl & mctrl_gpios_desc[i].mctrl); |
| count++; |
| } |
| gpiod_set_array_value(count, desc_array, NULL, values); |
| } |
| EXPORT_SYMBOL_GPL(mctrl_gpio_set); |
| |
| /** |
| * mctrl_gpio_to_gpiod - obtain gpio_desc of modem line index |
| * @gpios: gpios to look into |
| * @gidx: index of the modem line |
| * Returns: the gpio_desc structure associated to the modem line index |
| */ |
| struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios, |
| enum mctrl_gpio_idx gidx) |
| { |
| if (gpios == NULL) |
| return NULL; |
| |
| return gpios->gpio[gidx]; |
| } |
| EXPORT_SYMBOL_GPL(mctrl_gpio_to_gpiod); |
| |
| /** |
| * mctrl_gpio_get - update mctrl with the gpios values. |
| * @gpios: gpios to get the info from |
| * @mctrl: mctrl to set |
| * Returns: modified mctrl (the same value as in @mctrl) |
| * |
| * Update mctrl with the gpios values. |
| */ |
| unsigned int mctrl_gpio_get(struct mctrl_gpios *gpios, unsigned int *mctrl) |
| { |
| enum mctrl_gpio_idx i; |
| |
| if (gpios == NULL) |
| return *mctrl; |
| |
| for (i = 0; i < UART_GPIO_MAX; i++) { |
| if (gpios->gpio[i] && !mctrl_gpio_flags_is_dir_out(i)) { |
| if (gpiod_get_value(gpios->gpio[i])) |
| *mctrl |= mctrl_gpios_desc[i].mctrl; |
| else |
| *mctrl &= ~mctrl_gpios_desc[i].mctrl; |
| } |
| } |
| |
| return *mctrl; |
| } |
| EXPORT_SYMBOL_GPL(mctrl_gpio_get); |
| |
| unsigned int |
| mctrl_gpio_get_outputs(struct mctrl_gpios *gpios, unsigned int *mctrl) |
| { |
| enum mctrl_gpio_idx i; |
| |
| if (gpios == NULL) |
| return *mctrl; |
| |
| for (i = 0; i < UART_GPIO_MAX; i++) { |
| if (gpios->gpio[i] && mctrl_gpio_flags_is_dir_out(i)) { |
| if (gpiod_get_value(gpios->gpio[i])) |
| *mctrl |= mctrl_gpios_desc[i].mctrl; |
| else |
| *mctrl &= ~mctrl_gpios_desc[i].mctrl; |
| } |
| } |
| |
| return *mctrl; |
| } |
| EXPORT_SYMBOL_GPL(mctrl_gpio_get_outputs); |
| |
| struct mctrl_gpios *mctrl_gpio_init_noauto(struct device *dev, unsigned int idx) |
| { |
| struct mctrl_gpios *gpios; |
| enum mctrl_gpio_idx i; |
| |
| gpios = devm_kzalloc(dev, sizeof(*gpios), GFP_KERNEL); |
| if (!gpios) |
| return ERR_PTR(-ENOMEM); |
| |
| for (i = 0; i < UART_GPIO_MAX; i++) { |
| char *gpio_str; |
| bool present; |
| |
| /* Check if GPIO property exists and continue if not */ |
| gpio_str = kasprintf(GFP_KERNEL, "%s-gpios", |
| mctrl_gpios_desc[i].name); |
| if (!gpio_str) |
| continue; |
| |
| present = device_property_present(dev, gpio_str); |
| kfree(gpio_str); |
| if (!present) |
| continue; |
| |
| gpios->gpio[i] = |
| devm_gpiod_get_index_optional(dev, |
| mctrl_gpios_desc[i].name, |
| idx, |
| mctrl_gpios_desc[i].flags); |
| |
| if (IS_ERR(gpios->gpio[i])) |
| return ERR_CAST(gpios->gpio[i]); |
| } |
| |
| return gpios; |
| } |
| EXPORT_SYMBOL_GPL(mctrl_gpio_init_noauto); |
| |
| #define MCTRL_ANY_DELTA (TIOCM_RI | TIOCM_DSR | TIOCM_CD | TIOCM_CTS) |
| static irqreturn_t mctrl_gpio_irq_handle(int irq, void *context) |
| { |
| struct mctrl_gpios *gpios = context; |
| struct uart_port *port = gpios->port; |
| u32 mctrl = gpios->mctrl_prev; |
| u32 mctrl_diff; |
| unsigned long flags; |
| |
| mctrl_gpio_get(gpios, &mctrl); |
| |
| uart_port_lock_irqsave(port, &flags); |
| |
| mctrl_diff = mctrl ^ gpios->mctrl_prev; |
| gpios->mctrl_prev = mctrl; |
| |
| if (mctrl_diff & MCTRL_ANY_DELTA && port->state != NULL) { |
| if ((mctrl_diff & mctrl) & TIOCM_RI) |
| port->icount.rng++; |
| |
| if ((mctrl_diff & mctrl) & TIOCM_DSR) |
| port->icount.dsr++; |
| |
| if (mctrl_diff & TIOCM_CD) |
| uart_handle_dcd_change(port, mctrl & TIOCM_CD); |
| |
| if (mctrl_diff & TIOCM_CTS) |
| uart_handle_cts_change(port, mctrl & TIOCM_CTS); |
| |
| wake_up_interruptible(&port->state->port.delta_msr_wait); |
| } |
| |
| uart_port_unlock_irqrestore(port, flags); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /** |
| * mctrl_gpio_init - initialize uart gpios |
| * @port: port to initialize gpios for |
| * @idx: index of the gpio in the @port's device |
| * |
| * This will get the {cts,rts,...}-gpios from device tree if they are present |
| * and request them, set direction etc, and return an allocated structure. |
| * `devm_*` functions are used, so there's no need to call mctrl_gpio_free(). |
| * As this sets up the irq handling, make sure to not handle changes to the |
| * gpio input lines in your driver, too. |
| */ |
| struct mctrl_gpios *mctrl_gpio_init(struct uart_port *port, unsigned int idx) |
| { |
| struct mctrl_gpios *gpios; |
| enum mctrl_gpio_idx i; |
| |
| gpios = mctrl_gpio_init_noauto(port->dev, idx); |
| if (IS_ERR(gpios)) |
| return gpios; |
| |
| gpios->port = port; |
| |
| for (i = 0; i < UART_GPIO_MAX; ++i) { |
| int ret; |
| |
| if (!gpios->gpio[i] || mctrl_gpio_flags_is_dir_out(i)) |
| continue; |
| |
| ret = gpiod_to_irq(gpios->gpio[i]); |
| if (ret < 0) { |
| dev_err(port->dev, |
| "failed to find corresponding irq for %s (idx=%d, err=%d)\n", |
| mctrl_gpios_desc[i].name, idx, ret); |
| return ERR_PTR(ret); |
| } |
| gpios->irq[i] = ret; |
| |
| /* irqs should only be enabled in .enable_ms */ |
| irq_set_status_flags(gpios->irq[i], IRQ_NOAUTOEN); |
| |
| ret = devm_request_irq(port->dev, gpios->irq[i], |
| mctrl_gpio_irq_handle, |
| IRQ_TYPE_EDGE_BOTH, dev_name(port->dev), |
| gpios); |
| if (ret) { |
| /* alternatively implement polling */ |
| dev_err(port->dev, |
| "failed to request irq for %s (idx=%d, err=%d)\n", |
| mctrl_gpios_desc[i].name, idx, ret); |
| return ERR_PTR(ret); |
| } |
| } |
| |
| return gpios; |
| } |
| EXPORT_SYMBOL_GPL(mctrl_gpio_init); |
| |
| /** |
| * mctrl_gpio_free - explicitly free uart gpios |
| * @dev: uart port's device |
| * @gpios: gpios structure to be freed |
| * |
| * This will free the requested gpios in mctrl_gpio_init(). As `devm_*` |
| * functions are used, there's generally no need to call this function. |
| */ |
| void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios) |
| { |
| enum mctrl_gpio_idx i; |
| |
| if (gpios == NULL) |
| return; |
| |
| for (i = 0; i < UART_GPIO_MAX; i++) { |
| if (gpios->irq[i]) |
| devm_free_irq(gpios->port->dev, gpios->irq[i], gpios); |
| |
| if (gpios->gpio[i]) |
| devm_gpiod_put(dev, gpios->gpio[i]); |
| } |
| devm_kfree(dev, gpios); |
| } |
| EXPORT_SYMBOL_GPL(mctrl_gpio_free); |
| |
| /** |
| * mctrl_gpio_enable_ms - enable irqs and handling of changes to the ms lines |
| * @gpios: gpios to enable |
| */ |
| void mctrl_gpio_enable_ms(struct mctrl_gpios *gpios) |
| { |
| enum mctrl_gpio_idx i; |
| |
| if (gpios == NULL) |
| return; |
| |
| /* .enable_ms may be called multiple times */ |
| if (gpios->mctrl_on) |
| return; |
| |
| gpios->mctrl_on = true; |
| |
| /* get initial status of modem lines GPIOs */ |
| mctrl_gpio_get(gpios, &gpios->mctrl_prev); |
| |
| for (i = 0; i < UART_GPIO_MAX; ++i) { |
| if (!gpios->irq[i]) |
| continue; |
| |
| enable_irq(gpios->irq[i]); |
| } |
| } |
| EXPORT_SYMBOL_GPL(mctrl_gpio_enable_ms); |
| |
| /** |
| * mctrl_gpio_disable_ms - disable irqs and handling of changes to the ms lines |
| * @gpios: gpios to disable |
| */ |
| void mctrl_gpio_disable_ms(struct mctrl_gpios *gpios) |
| { |
| enum mctrl_gpio_idx i; |
| |
| if (gpios == NULL) |
| return; |
| |
| if (!gpios->mctrl_on) |
| return; |
| |
| gpios->mctrl_on = false; |
| |
| for (i = 0; i < UART_GPIO_MAX; ++i) { |
| if (!gpios->irq[i]) |
| continue; |
| |
| disable_irq(gpios->irq[i]); |
| } |
| } |
| EXPORT_SYMBOL_GPL(mctrl_gpio_disable_ms); |
| |
| void mctrl_gpio_enable_irq_wake(struct mctrl_gpios *gpios) |
| { |
| enum mctrl_gpio_idx i; |
| |
| if (!gpios) |
| return; |
| |
| if (!gpios->mctrl_on) |
| return; |
| |
| for (i = 0; i < UART_GPIO_MAX; ++i) { |
| if (!gpios->irq[i]) |
| continue; |
| |
| enable_irq_wake(gpios->irq[i]); |
| } |
| } |
| EXPORT_SYMBOL_GPL(mctrl_gpio_enable_irq_wake); |
| |
| void mctrl_gpio_disable_irq_wake(struct mctrl_gpios *gpios) |
| { |
| enum mctrl_gpio_idx i; |
| |
| if (!gpios) |
| return; |
| |
| if (!gpios->mctrl_on) |
| return; |
| |
| for (i = 0; i < UART_GPIO_MAX; ++i) { |
| if (!gpios->irq[i]) |
| continue; |
| |
| disable_irq_wake(gpios->irq[i]); |
| } |
| } |
| EXPORT_SYMBOL_GPL(mctrl_gpio_disable_irq_wake); |
| |
| MODULE_LICENSE("GPL"); |