| // SPDX-License-Identifier: GPL-2.0-only |
| // Copyright (c) 2015-2019 Intel Corporation |
| |
| #include <linux/acpi.h> |
| #include <sound/intel-nhlt.h> |
| |
| struct nhlt_acpi_table *intel_nhlt_init(struct device *dev) |
| { |
| struct nhlt_acpi_table *nhlt; |
| acpi_status status; |
| |
| status = acpi_get_table(ACPI_SIG_NHLT, 0, |
| (struct acpi_table_header **)&nhlt); |
| if (ACPI_FAILURE(status)) { |
| dev_warn(dev, "NHLT table not found\n"); |
| return NULL; |
| } |
| |
| return nhlt; |
| } |
| EXPORT_SYMBOL_GPL(intel_nhlt_init); |
| |
| void intel_nhlt_free(struct nhlt_acpi_table *nhlt) |
| { |
| acpi_put_table((struct acpi_table_header *)nhlt); |
| } |
| EXPORT_SYMBOL_GPL(intel_nhlt_free); |
| |
| int intel_nhlt_get_dmic_geo(struct device *dev, struct nhlt_acpi_table *nhlt) |
| { |
| struct nhlt_endpoint *epnt; |
| struct nhlt_dmic_array_config *cfg; |
| struct nhlt_vendor_dmic_array_config *cfg_vendor; |
| struct nhlt_fmt *fmt_configs; |
| unsigned int dmic_geo = 0; |
| u16 max_ch = 0; |
| u8 i, j; |
| |
| if (!nhlt) |
| return 0; |
| |
| if (nhlt->header.length <= sizeof(struct acpi_table_header)) { |
| dev_warn(dev, "Invalid DMIC description table\n"); |
| return 0; |
| } |
| |
| for (j = 0, epnt = nhlt->desc; j < nhlt->endpoint_count; j++, |
| epnt = (struct nhlt_endpoint *)((u8 *)epnt + epnt->length)) { |
| |
| if (epnt->linktype != NHLT_LINK_DMIC) |
| continue; |
| |
| cfg = (struct nhlt_dmic_array_config *)(epnt->config.caps); |
| fmt_configs = (struct nhlt_fmt *)(epnt->config.caps + epnt->config.size); |
| |
| /* find max number of channels based on format_configuration */ |
| if (fmt_configs->fmt_count) { |
| struct nhlt_fmt_cfg *fmt_cfg = fmt_configs->fmt_config; |
| |
| dev_dbg(dev, "found %d format definitions\n", |
| fmt_configs->fmt_count); |
| |
| for (i = 0; i < fmt_configs->fmt_count; i++) { |
| struct wav_fmt_ext *fmt_ext; |
| |
| fmt_ext = &fmt_cfg->fmt_ext; |
| |
| if (fmt_ext->fmt.channels > max_ch) |
| max_ch = fmt_ext->fmt.channels; |
| |
| /* Move to the next nhlt_fmt_cfg */ |
| fmt_cfg = (struct nhlt_fmt_cfg *)(fmt_cfg->config.caps + |
| fmt_cfg->config.size); |
| } |
| dev_dbg(dev, "max channels found %d\n", max_ch); |
| } else { |
| dev_dbg(dev, "No format information found\n"); |
| } |
| |
| if (cfg->device_config.config_type != NHLT_CONFIG_TYPE_MIC_ARRAY) { |
| dmic_geo = max_ch; |
| } else { |
| switch (cfg->array_type) { |
| case NHLT_MIC_ARRAY_2CH_SMALL: |
| case NHLT_MIC_ARRAY_2CH_BIG: |
| dmic_geo = MIC_ARRAY_2CH; |
| break; |
| |
| case NHLT_MIC_ARRAY_4CH_1ST_GEOM: |
| case NHLT_MIC_ARRAY_4CH_L_SHAPED: |
| case NHLT_MIC_ARRAY_4CH_2ND_GEOM: |
| dmic_geo = MIC_ARRAY_4CH; |
| break; |
| case NHLT_MIC_ARRAY_VENDOR_DEFINED: |
| cfg_vendor = (struct nhlt_vendor_dmic_array_config *)cfg; |
| dmic_geo = cfg_vendor->nb_mics; |
| break; |
| default: |
| dev_warn(dev, "%s: undefined DMIC array_type 0x%0x\n", |
| __func__, cfg->array_type); |
| } |
| |
| if (dmic_geo > 0) { |
| dev_dbg(dev, "Array with %d dmics\n", dmic_geo); |
| } |
| if (max_ch > dmic_geo) { |
| dev_dbg(dev, "max channels %d exceed dmic number %d\n", |
| max_ch, dmic_geo); |
| } |
| } |
| } |
| |
| dev_dbg(dev, "dmic number %d max_ch %d\n", dmic_geo, max_ch); |
| |
| return dmic_geo; |
| } |
| EXPORT_SYMBOL_GPL(intel_nhlt_get_dmic_geo); |
| |
| bool intel_nhlt_has_endpoint_type(struct nhlt_acpi_table *nhlt, u8 link_type) |
| { |
| struct nhlt_endpoint *epnt; |
| int i; |
| |
| if (!nhlt) |
| return false; |
| |
| epnt = (struct nhlt_endpoint *)nhlt->desc; |
| for (i = 0; i < nhlt->endpoint_count; i++) { |
| if (epnt->linktype == link_type) |
| return true; |
| |
| epnt = (struct nhlt_endpoint *)((u8 *)epnt + epnt->length); |
| } |
| return false; |
| } |
| EXPORT_SYMBOL(intel_nhlt_has_endpoint_type); |
| |
| int intel_nhlt_ssp_endpoint_mask(struct nhlt_acpi_table *nhlt, u8 device_type) |
| { |
| struct nhlt_endpoint *epnt; |
| int ssp_mask = 0; |
| int i; |
| |
| if (!nhlt || (device_type != NHLT_DEVICE_BT && device_type != NHLT_DEVICE_I2S)) |
| return 0; |
| |
| epnt = (struct nhlt_endpoint *)nhlt->desc; |
| for (i = 0; i < nhlt->endpoint_count; i++) { |
| if (epnt->linktype == NHLT_LINK_SSP && epnt->device_type == device_type) { |
| /* for SSP the virtual bus id is the SSP port */ |
| ssp_mask |= BIT(epnt->virtual_bus_id); |
| } |
| epnt = (struct nhlt_endpoint *)((u8 *)epnt + epnt->length); |
| } |
| |
| return ssp_mask; |
| } |
| EXPORT_SYMBOL(intel_nhlt_ssp_endpoint_mask); |
| |
| #define SSP_BLOB_V1_0_SIZE 84 |
| #define SSP_BLOB_V1_0_MDIVC_OFFSET 19 /* offset in u32 */ |
| |
| #define SSP_BLOB_V1_5_SIZE 96 |
| #define SSP_BLOB_V1_5_MDIVC_OFFSET 21 /* offset in u32 */ |
| #define SSP_BLOB_VER_1_5 0xEE000105 |
| |
| #define SSP_BLOB_V2_0_SIZE 88 |
| #define SSP_BLOB_V2_0_MDIVC_OFFSET 20 /* offset in u32 */ |
| #define SSP_BLOB_VER_2_0 0xEE000200 |
| |
| int intel_nhlt_ssp_mclk_mask(struct nhlt_acpi_table *nhlt, int ssp_num) |
| { |
| struct nhlt_endpoint *epnt; |
| struct nhlt_fmt *fmt; |
| struct nhlt_fmt_cfg *cfg; |
| int mclk_mask = 0; |
| int i, j; |
| |
| if (!nhlt) |
| return 0; |
| |
| epnt = (struct nhlt_endpoint *)nhlt->desc; |
| for (i = 0; i < nhlt->endpoint_count; i++) { |
| |
| /* we only care about endpoints connected to an audio codec over SSP */ |
| if (epnt->linktype == NHLT_LINK_SSP && |
| epnt->device_type == NHLT_DEVICE_I2S && |
| epnt->virtual_bus_id == ssp_num) { |
| |
| fmt = (struct nhlt_fmt *)(epnt->config.caps + epnt->config.size); |
| cfg = fmt->fmt_config; |
| |
| /* |
| * In theory all formats should use the same MCLK but it doesn't hurt to |
| * double-check that the configuration is consistent |
| */ |
| for (j = 0; j < fmt->fmt_count; j++) { |
| u32 *blob; |
| int mdivc_offset; |
| int size; |
| |
| /* first check we have enough data to read the blob type */ |
| if (cfg->config.size < 8) |
| return -EINVAL; |
| |
| blob = (u32 *)cfg->config.caps; |
| |
| if (blob[1] == SSP_BLOB_VER_2_0) { |
| mdivc_offset = SSP_BLOB_V2_0_MDIVC_OFFSET; |
| size = SSP_BLOB_V2_0_SIZE; |
| } else if (blob[1] == SSP_BLOB_VER_1_5) { |
| mdivc_offset = SSP_BLOB_V1_5_MDIVC_OFFSET; |
| size = SSP_BLOB_V1_5_SIZE; |
| } else { |
| mdivc_offset = SSP_BLOB_V1_0_MDIVC_OFFSET; |
| size = SSP_BLOB_V1_0_SIZE; |
| } |
| |
| /* make sure we have enough data for the fixed part of the blob */ |
| if (cfg->config.size < size) |
| return -EINVAL; |
| |
| mclk_mask |= blob[mdivc_offset] & GENMASK(1, 0); |
| |
| cfg = (struct nhlt_fmt_cfg *)(cfg->config.caps + cfg->config.size); |
| } |
| } |
| epnt = (struct nhlt_endpoint *)((u8 *)epnt + epnt->length); |
| } |
| |
| /* make sure only one MCLK is used */ |
| if (hweight_long(mclk_mask) != 1) |
| return -EINVAL; |
| |
| return mclk_mask; |
| } |
| EXPORT_SYMBOL(intel_nhlt_ssp_mclk_mask); |
| |
| static struct nhlt_specific_cfg * |
| nhlt_get_specific_cfg(struct device *dev, struct nhlt_fmt *fmt, u8 num_ch, |
| u32 rate, u8 vbps, u8 bps, bool ignore_vbps) |
| { |
| struct nhlt_fmt_cfg *cfg = fmt->fmt_config; |
| struct wav_fmt *wfmt; |
| u16 _bps, _vbps; |
| int i; |
| |
| dev_dbg(dev, "Endpoint format count=%d\n", fmt->fmt_count); |
| |
| for (i = 0; i < fmt->fmt_count; i++) { |
| wfmt = &cfg->fmt_ext.fmt; |
| _bps = wfmt->bits_per_sample; |
| _vbps = cfg->fmt_ext.sample.valid_bits_per_sample; |
| |
| dev_dbg(dev, "Endpoint format: ch=%d fmt=%d/%d rate=%d\n", |
| wfmt->channels, _vbps, _bps, wfmt->samples_per_sec); |
| |
| /* |
| * When looking for exact match of configuration ignore the vbps |
| * from NHLT table when ignore_vbps is true |
| */ |
| if (wfmt->channels == num_ch && wfmt->samples_per_sec == rate && |
| (ignore_vbps || vbps == _vbps) && bps == _bps) |
| return &cfg->config; |
| |
| cfg = (struct nhlt_fmt_cfg *)(cfg->config.caps + cfg->config.size); |
| } |
| |
| return NULL; |
| } |
| |
| static bool nhlt_check_ep_match(struct device *dev, struct nhlt_endpoint *epnt, |
| u32 bus_id, u8 link_type, u8 dir, u8 dev_type) |
| { |
| dev_dbg(dev, "Endpoint: vbus_id=%d link_type=%d dir=%d dev_type = %d\n", |
| epnt->virtual_bus_id, epnt->linktype, |
| epnt->direction, epnt->device_type); |
| |
| if ((epnt->virtual_bus_id != bus_id) || |
| (epnt->linktype != link_type) || |
| (epnt->direction != dir)) |
| return false; |
| |
| /* link of type DMIC bypasses device_type check */ |
| return epnt->linktype == NHLT_LINK_DMIC || |
| epnt->device_type == dev_type; |
| } |
| |
| struct nhlt_specific_cfg * |
| intel_nhlt_get_endpoint_blob(struct device *dev, struct nhlt_acpi_table *nhlt, |
| u32 bus_id, u8 link_type, u8 vbps, u8 bps, |
| u8 num_ch, u32 rate, u8 dir, u8 dev_type) |
| { |
| struct nhlt_specific_cfg *cfg; |
| struct nhlt_endpoint *epnt; |
| bool ignore_vbps = false; |
| struct nhlt_fmt *fmt; |
| int i; |
| |
| if (!nhlt) |
| return NULL; |
| |
| dev_dbg(dev, "Looking for configuration:\n"); |
| dev_dbg(dev, " vbus_id=%d link_type=%d dir=%d, dev_type=%d\n", |
| bus_id, link_type, dir, dev_type); |
| if (link_type == NHLT_LINK_DMIC && bps == 32 && (vbps == 24 || vbps == 32)) { |
| /* |
| * The DMIC hardware supports only one type of 32 bits sample |
| * size, which is 24 bit sampling on the MSB side and bits[1:0] |
| * are used for indicating the channel number. |
| * It has been observed that some NHLT tables have the vbps |
| * specified as 32 while some uses 24. |
| * The format these variations describe are identical, the |
| * hardware is configured and behaves the same way. |
| * Note: when the samples assumed to be vbps=32 then the 'noise' |
| * introduced by the lower two bits (channel number) have no |
| * real life implication on audio quality. |
| */ |
| dev_dbg(dev, |
| " ch=%d fmt=%d rate=%d (vbps is ignored for DMIC 32bit format)\n", |
| num_ch, bps, rate); |
| ignore_vbps = true; |
| } else { |
| dev_dbg(dev, " ch=%d fmt=%d/%d rate=%d\n", num_ch, vbps, bps, rate); |
| } |
| dev_dbg(dev, "Endpoint count=%d\n", nhlt->endpoint_count); |
| |
| epnt = (struct nhlt_endpoint *)nhlt->desc; |
| |
| for (i = 0; i < nhlt->endpoint_count; i++) { |
| if (nhlt_check_ep_match(dev, epnt, bus_id, link_type, dir, dev_type)) { |
| fmt = (struct nhlt_fmt *)(epnt->config.caps + epnt->config.size); |
| |
| cfg = nhlt_get_specific_cfg(dev, fmt, num_ch, rate, |
| vbps, bps, ignore_vbps); |
| if (cfg) |
| return cfg; |
| } |
| |
| epnt = (struct nhlt_endpoint *)((u8 *)epnt + epnt->length); |
| } |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL(intel_nhlt_get_endpoint_blob); |