| /* SPDX-License-Identifier: GPL-2.0-or-later */ |
| /* |
| * MIPI Display Bus Interface (DBI) LCD controller support |
| * |
| * Copyright 2016 Noralf Trønnes |
| */ |
| |
| #ifndef __LINUX_MIPI_DBI_H |
| #define __LINUX_MIPI_DBI_H |
| |
| #include <linux/mutex.h> |
| #include <drm/drm_device.h> |
| #include <drm/drm_simple_kms_helper.h> |
| |
| struct drm_rect; |
| struct spi_device; |
| struct gpio_desc; |
| struct regulator; |
| |
| /** |
| * struct mipi_dbi - MIPI DBI interface |
| */ |
| struct mipi_dbi { |
| /** |
| * @cmdlock: Command lock |
| */ |
| struct mutex cmdlock; |
| |
| /** |
| * @command: Bus specific callback executing commands. |
| */ |
| int (*command)(struct mipi_dbi *dbi, u8 *cmd, u8 *param, size_t num); |
| |
| /** |
| * @read_commands: Array of read commands terminated by a zero entry. |
| * Reading is disabled if this is NULL. |
| */ |
| const u8 *read_commands; |
| |
| /** |
| * @swap_bytes: Swap bytes in buffer before transfer |
| */ |
| bool swap_bytes; |
| |
| /** |
| * @reset: Optional reset gpio |
| */ |
| struct gpio_desc *reset; |
| |
| /* Type C specific */ |
| |
| /** |
| * @spi: SPI device |
| */ |
| struct spi_device *spi; |
| |
| /** |
| * @dc: Optional D/C gpio. |
| */ |
| struct gpio_desc *dc; |
| |
| /** |
| * @tx_buf9: Buffer used for Option 1 9-bit conversion |
| */ |
| void *tx_buf9; |
| |
| /** |
| * @tx_buf9_len: Size of tx_buf9. |
| */ |
| size_t tx_buf9_len; |
| }; |
| |
| /** |
| * struct mipi_dbi_dev - MIPI DBI device |
| */ |
| struct mipi_dbi_dev { |
| /** |
| * @drm: DRM device |
| */ |
| struct drm_device drm; |
| |
| /** |
| * @pipe: Display pipe structure |
| */ |
| struct drm_simple_display_pipe pipe; |
| |
| /** |
| * @connector: Connector |
| */ |
| struct drm_connector connector; |
| |
| /** |
| * @mode: Fixed display mode |
| */ |
| struct drm_display_mode mode; |
| |
| /** |
| * @enabled: Pipeline is enabled |
| */ |
| bool enabled; |
| |
| /** |
| * @tx_buf: Buffer used for transfer (copy clip rect area) |
| */ |
| u16 *tx_buf; |
| |
| /** |
| * @rotation: initial rotation in degrees Counter Clock Wise |
| */ |
| unsigned int rotation; |
| |
| /** |
| * @left_offset: Horizontal offset of the display relative to the |
| * controller's driver array |
| */ |
| unsigned int left_offset; |
| |
| /** |
| * @top_offset: Vertical offset of the display relative to the |
| * controller's driver array |
| */ |
| unsigned int top_offset; |
| |
| /** |
| * @backlight: backlight device (optional) |
| */ |
| struct backlight_device *backlight; |
| |
| /** |
| * @regulator: power regulator (optional) |
| */ |
| struct regulator *regulator; |
| |
| /** |
| * @dbi: MIPI DBI interface |
| */ |
| struct mipi_dbi dbi; |
| }; |
| |
| static inline struct mipi_dbi_dev *drm_to_mipi_dbi_dev(struct drm_device *drm) |
| { |
| return container_of(drm, struct mipi_dbi_dev, drm); |
| } |
| |
| int mipi_dbi_spi_init(struct spi_device *spi, struct mipi_dbi *dbi, |
| struct gpio_desc *dc); |
| int mipi_dbi_dev_init_with_formats(struct mipi_dbi_dev *dbidev, |
| const struct drm_simple_display_pipe_funcs *funcs, |
| const uint32_t *formats, unsigned int format_count, |
| const struct drm_display_mode *mode, |
| unsigned int rotation, size_t tx_buf_size); |
| int mipi_dbi_dev_init(struct mipi_dbi_dev *dbidev, |
| const struct drm_simple_display_pipe_funcs *funcs, |
| const struct drm_display_mode *mode, unsigned int rotation); |
| void mipi_dbi_release(struct drm_device *drm); |
| void mipi_dbi_pipe_update(struct drm_simple_display_pipe *pipe, |
| struct drm_plane_state *old_state); |
| void mipi_dbi_enable_flush(struct mipi_dbi_dev *dbidev, |
| struct drm_crtc_state *crtc_state, |
| struct drm_plane_state *plan_state); |
| void mipi_dbi_pipe_disable(struct drm_simple_display_pipe *pipe); |
| void mipi_dbi_hw_reset(struct mipi_dbi *dbi); |
| bool mipi_dbi_display_is_on(struct mipi_dbi *dbi); |
| int mipi_dbi_poweron_reset(struct mipi_dbi_dev *dbidev); |
| int mipi_dbi_poweron_conditional_reset(struct mipi_dbi_dev *dbidev); |
| |
| u32 mipi_dbi_spi_cmd_max_speed(struct spi_device *spi, size_t len); |
| int mipi_dbi_spi_transfer(struct spi_device *spi, u32 speed_hz, |
| u8 bpw, const void *buf, size_t len); |
| |
| int mipi_dbi_command_read(struct mipi_dbi *dbi, u8 cmd, u8 *val); |
| int mipi_dbi_command_buf(struct mipi_dbi *dbi, u8 cmd, u8 *data, size_t len); |
| int mipi_dbi_command_stackbuf(struct mipi_dbi *dbi, u8 cmd, u8 *data, size_t len); |
| int mipi_dbi_buf_copy(void *dst, struct drm_framebuffer *fb, |
| struct drm_rect *clip, bool swap); |
| /** |
| * mipi_dbi_command - MIPI DCS command with optional parameter(s) |
| * @dbi: MIPI DBI structure |
| * @cmd: Command |
| * @seq...: Optional parameter(s) |
| * |
| * Send MIPI DCS command to the controller. Use mipi_dbi_command_read() for |
| * get/read. |
| * |
| * Returns: |
| * Zero on success, negative error code on failure. |
| */ |
| #define mipi_dbi_command(dbi, cmd, seq...) \ |
| ({ \ |
| u8 d[] = { seq }; \ |
| mipi_dbi_command_stackbuf(dbi, cmd, d, ARRAY_SIZE(d)); \ |
| }) |
| |
| #ifdef CONFIG_DEBUG_FS |
| int mipi_dbi_debugfs_init(struct drm_minor *minor); |
| #else |
| #define mipi_dbi_debugfs_init NULL |
| #endif |
| |
| #endif /* __LINUX_MIPI_DBI_H */ |