blob: d9c54c32c6b9755f119165bb319fead1ef511418 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra194-cbb.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: NVIDIA Tegra194 CBB 1.0
maintainers:
- Sumit Gupta <sumitg@nvidia.com>
description: |+
The Control Backbone (CBB) is comprised of the physical path from an
initiator to a target's register configuration space. CBB 1.0 has
multiple hierarchical sub-NOCs (Network-on-Chip) and connects various
initiators and targets using different bridges like AXIP2P, AXI2APB.
This driver handles errors due to illegal register accesses reported
by the NOCs inside the CBB. NOCs reporting errors are cluster NOCs
"AON-NOC, SCE-NOC, RCE-NOC, BPMP-NOC, CV-NOC" and "CBB Central NOC"
which is the main NOC.
By default, the access issuing initiator is informed about the error
using SError or Data Abort exception unless the ERD (Error Response
Disable) is enabled/set for that initiator. If the ERD is enabled, then
SError or Data Abort is masked and the error is reported with interrupt.
- For CCPLEX (CPU Complex) initiator, the driver sets ERD bit. So, the
errors due to illegal accesses from CCPLEX are reported by interrupts.
If ERD is not set, then error is reported by SError.
- For other initiators, the ERD is disabled. So, the access issuing
initiator is informed about the illegal access by Data Abort exception.
In addition, an interrupt is also generated to CCPLEX. These initiators
include all engines using Cortex-R5 (which is ARMv7 CPU cluster) and
engines like TSEC (Security co-processor), NVDEC (NVIDIA Video Decoder
engine) etc which can initiate transactions.
The driver prints relevant debug information like Error Code, Error
Description, Master, Address, AXI ID, Cache, Protection, Security Group
etc on receiving error notification.
properties:
$nodename:
pattern: "^[a-z]+-noc@[0-9a-f]+$"
compatible:
enum:
- nvidia,tegra194-cbb-noc
- nvidia,tegra194-aon-noc
- nvidia,tegra194-bpmp-noc
- nvidia,tegra194-rce-noc
- nvidia,tegra194-sce-noc
reg:
maxItems: 1
interrupts:
description:
CCPLEX receives secure or nonsecure interrupt depending on error type.
A secure interrupt is received for SEC(firewall) & SLV errors and a
non-secure interrupt is received for TMO & DEC errors.
items:
- description: non-secure interrupt
- description: secure interrupt
nvidia,axi2apb:
$ref: /schemas/types.yaml#/definitions/phandle
description:
Specifies the node having all axi2apb bridges which need to be checked
for any error logged in their status register.
nvidia,apbmisc:
$ref: /schemas/types.yaml#/definitions/phandle
description:
Specifies the apbmisc node which need to be used for reading the ERD
register.
additionalProperties: false
required:
- compatible
- reg
- interrupts
- nvidia,apbmisc
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
cbb-noc@2300000 {
compatible = "nvidia,tegra194-cbb-noc";
reg = <0x02300000 0x1000>;
interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
nvidia,axi2apb = <&axi2apb>;
nvidia,apbmisc = <&apbmisc>;
};