blob: 557e524786c2224e1af8478c2f3ba84f9d0eb342 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/firmware/fsl,scu.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: NXP i.MX System Controller Firmware (SCFW)
maintainers:
- Dong Aisheng <aisheng.dong@nxp.com>
description:
The System Controller Firmware (SCFW) is a low-level system function
which runs on a dedicated Cortex-M core to provide power, clock, and
resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
(QM, QP), and i.MX8QX (QXP, DX).
The AP communicates with the SC using a multi-ported MU module found
in the LSIO subsystem. The current definition of this MU module provides
5 remote AP connections to the SC to support up to 5 execution environments
(TZ, HV, standard Linux, etc.). The SC side of this MU module interfaces
with the LSIO DSC IP bus. The SC firmware will communicate with this MU
using the MSI bus.
properties:
compatible:
const: fsl,imx-scu
clock-controller:
description:
Clock controller node that provides the clocks controlled by the SCU
$ref: /schemas/clock/fsl,scu-clk.yaml
gpio:
description:
Control the GPIO PINs on SCU domain over the firmware APIs
$ref: /schemas/gpio/fsl,imx8qxp-sc-gpio.yaml
ocotp:
description:
OCOTP controller node provided by the SCU
$ref: /schemas/nvmem/fsl,scu-ocotp.yaml
keys:
description:
Keys provided by the SCU
$ref: /schemas/input/fsl,scu-key.yaml
mboxes:
description:
A list of phandles of TX MU channels followed by a list of phandles of
RX MU channels. The list may include at the end one more optional MU
channel for general interrupt. The number of expected tx and rx
channels is 1 TX and 1 RX channels if MU instance is "fsl,imx8-mu-scu"
compatible, 4 TX and 4 RX channels otherwise. All MU channels must be
within the same MU instance. Cross instances are not allowed. The MU
instance can only be one of LSIO MU0~M4 for imx8qxp and imx8qm. Users
need to ensure that one is used that does not conflict with other
execution environments such as ATF.
oneOf:
- items:
- description: TX0 MU channel
- description: RX0 MU channel
- items:
- description: TX0 MU channel
- description: RX0 MU channel
- description: optional MU channel for general interrupt
- items:
- description: TX0 MU channel
- description: TX1 MU channel
- description: TX2 MU channel
- description: TX3 MU channel
- description: RX0 MU channel
- description: RX1 MU channel
- description: RX2 MU channel
- description: RX3 MU channel
- items:
- description: TX0 MU channel
- description: TX1 MU channel
- description: TX2 MU channel
- description: TX3 MU channel
- description: RX0 MU channel
- description: RX1 MU channel
- description: RX2 MU channel
- description: RX3 MU channel
- description: optional MU channel for general interrupt
mbox-names:
oneOf:
- items:
- const: tx0
- const: rx0
- items:
- const: tx0
- const: rx0
- const: gip3
- items:
- const: tx0
- const: tx1
- const: tx2
- const: tx3
- const: rx0
- const: rx1
- const: rx2
- const: rx3
- items:
- const: tx0
- const: tx1
- const: tx2
- const: tx3
- const: rx0
- const: rx1
- const: rx2
- const: rx3
- const: gip3
pinctrl:
description:
Pin controller provided by the SCU
$ref: /schemas/pinctrl/fsl,scu-pinctrl.yaml
power-controller:
description:
Power domains controller node that provides the power domains
controlled by the SCU
$ref: /schemas/power/fsl,scu-pd.yaml
rtc:
description:
RTC controller provided by the SCU
$ref: /schemas/rtc/fsl,scu-rtc.yaml
thermal-sensor:
description:
Thermal sensor provided by the SCU
$ref: /schemas/thermal/fsl,scu-thermal.yaml
watchdog:
description:
Watchdog controller provided by the SCU
$ref: /schemas/watchdog/fsl,scu-wdt.yaml
required:
- compatible
- mbox-names
- mboxes
additionalProperties: false
examples:
- |
#include <dt-bindings/firmware/imx/rsrc.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/pads-imx8qxp.h>
firmware {
system-controller {
compatible = "fsl,imx-scu";
mbox-names = "tx0", "tx1", "tx2", "tx3",
"rx0", "rx1", "rx2", "rx3",
"gip3";
mboxes = <&lsio_mu1 0 0 &lsio_mu1 0 1 &lsio_mu1 0 2 &lsio_mu1 0 3
&lsio_mu1 1 0 &lsio_mu1 1 1 &lsio_mu1 1 2 &lsio_mu1 1 3
&lsio_mu1 3 3>;
clock-controller {
compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
#clock-cells = <2>;
};
pinctrl {
compatible = "fsl,imx8qxp-iomuxc";
pinctrl_lpuart0: lpuart0grp {
fsl,pins = <
IMX8QXP_UART0_RX_ADMA_UART0_RX 0x06000020
IMX8QXP_UART0_TX_ADMA_UART0_TX 0x06000020
>;
};
};
ocotp {
compatible = "fsl,imx8qxp-scu-ocotp";
#address-cells = <1>;
#size-cells = <1>;
fec_mac0: mac@2c4 {
reg = <0x2c4 6>;
};
};
power-controller {
compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd";
#power-domain-cells = <1>;
};
rtc {
compatible = "fsl,imx8qxp-sc-rtc";
};
keys {
compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
linux,keycodes = <KEY_POWER>;
};
watchdog {
compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
timeout-sec = <60>;
};
thermal-sensor {
compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
#thermal-sensor-cells = <1>;
};
};
};