blob: 296fdd6b8f38ba18d60b23e7c65232cddd1122d2 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/gpio/brcm,kona-gpio.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Broadcom Kona family GPIO controller
description:
The Broadcom GPIO Controller IP can be configured prior to synthesis to
support up to 8 banks of 32 GPIOs where each bank has its own IRQ. The
GPIO controller only supports edge, not level, triggering of interrupts.
maintainers:
- Ray Jui <rjui@broadcom.com>
properties:
compatible:
items:
- enum:
- brcm,bcm11351-gpio
- brcm,bcm21664-gpio
- brcm,bcm23550-gpio
- const: brcm,kona-gpio
reg:
maxItems: 1
interrupts:
minItems: 4
maxItems: 6
description:
The interrupt outputs from the controller. There is one GPIO interrupt
per GPIO bank. The number of interrupts listed depends on the number of
GPIO banks on the SoC. The interrupts must be ordered by bank, starting
with bank 0. There is always a 1:1 mapping between banks and IRQs.
'#gpio-cells':
const: 2
'#interrupt-cells':
const: 2
gpio-controller: true
interrupt-controller: true
required:
- compatible
- reg
- interrupts
- '#gpio-cells'
- '#interrupt-cells'
- gpio-controller
- interrupt-controller
allOf:
- if:
properties:
compatible:
contains:
const: brcm,bcm11351-gpio
then:
properties:
interrupts:
minItems: 6
- if:
properties:
compatible:
contains:
enum:
- brcm,bcm21664-gpio
- brcm,bcm23550-gpio
then:
properties:
interrupts:
maxItems: 4
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
gpio@35003000 {
compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio";
reg = <0x35003000 0x800>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
#interrupt-cells = <2>;
gpio-controller;
interrupt-controller;
};
...