Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml

# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/rockchip,rk3399-pcie.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Rockchip AXI PCIe Root Port Bridge Host

maintainers:
  - Shawn Lin <shawn.lin@rock-chips.com>

allOf:
  - $ref: /schemas/pci/pci-bus.yaml#
  - $ref: rockchip,rk3399-pcie-common.yaml#

properties:
  compatible:
    const: rockchip,rk3399-pcie

  reg: true

  reg-names:
    items:
      - const: axi-base
      - const: apb-base

  interrupts:
    maxItems: 3

  interrupt-names:
    items:
      - const: sys
      - const: legacy
      - const: client

  aspm-no-l0s:
    description: This property is needed if using 24MHz OSC for RC's PHY.

  ep-gpios:
    description: pre-reset GPIO

  vpcie12v-supply:
    description: The 12v regulator to use for PCIe.

  vpcie3v3-supply:
    description: The 3.3v regulator to use for PCIe.

  vpcie1v8-supply:
    description: The 1.8v regulator to use for PCIe.

  vpcie0v9-supply:
    description: The 0.9v regulator to use for PCIe.

  interrupt-controller:
    type: object
    additionalProperties: false

    properties:
      '#address-cells':
        const: 0

      '#interrupt-cells':
        const: 1

      interrupt-controller: true

required:
  - ranges
  - "#interrupt-cells"
  - interrupts
  - interrupt-controller
  - interrupt-map
  - interrupt-map-mask
  - msi-map

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/clock/rk3399-cru.h>

    bus {
        #address-cells = <2>;
        #size-cells = <2>;

        pcie@f8000000 {
            compatible = "rockchip,rk3399-pcie";
            device_type = "pci";
            #address-cells = <3>;
            #size-cells = <2>;
            clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
              <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
            clock-names = "aclk", "aclk-perf",
                    "hclk", "pm";
            interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
                  <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
                  <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>;
            interrupt-names = "sys", "legacy", "client";
            ep-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
            ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000
                0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>;
            num-lanes = <4>;
            msi-map = <0x0 &its 0x0 0x1000>;
            reg = <0x0 0xf8000000 0x0 0x2000000>, <0x0 0xfd000000 0x0 0x1000000>;
            reg-names = "axi-base", "apb-base";
            resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
              <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> ,
              <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>;
            reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
                    "pm", "pclk", "aclk";
            /* deprecated legacy PHY model */
            phys = <&pcie_phy>;
            phy-names = "pcie-phy";
            pinctrl-names = "default";
            pinctrl-0 = <&pcie_clkreq>;
            #interrupt-cells = <1>;
            interrupt-map-mask = <0 0 0 7>;
            interrupt-map = <0 0 0 1 &pcie0_intc 0>,
                <0 0 0 2 &pcie0_intc 1>,
                <0 0 0 3 &pcie0_intc 2>,
                <0 0 0 4 &pcie0_intc 3>;

            pcie0_intc: interrupt-controller {
                interrupt-controller;
                #address-cells = <0>;
                #interrupt-cells = <1>;
            };
        };
    };
...