| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * linux/arch/arm/mach-omap1/id.c |
| * |
| * OMAP1 CPU identification code |
| * |
| * Copyright (C) 2004 Nokia Corporation |
| * Written by Tony Lindgren <tony@atomide.com> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/soc/ti/omap1-io.h> |
| #include <asm/system_info.h> |
| |
| #include "soc.h" |
| #include "hardware.h" |
| #include "common.h" |
| |
| #define OMAP_DIE_ID_0 0xfffe1800 |
| #define OMAP_DIE_ID_1 0xfffe1804 |
| #define OMAP_PRODUCTION_ID_0 0xfffe2000 |
| #define OMAP_PRODUCTION_ID_1 0xfffe2004 |
| #define OMAP32_ID_0 0xfffed400 |
| #define OMAP32_ID_1 0xfffed404 |
| |
| struct omap_id { |
| u16 jtag_id; /* Used to determine OMAP type */ |
| u8 die_rev; /* Processor revision */ |
| u32 omap_id; /* OMAP revision */ |
| u32 type; /* Cpu id bits [31:08], cpu class bits [07:00] */ |
| }; |
| |
| static unsigned int omap_revision; |
| |
| /* Register values to detect the OMAP version */ |
| static struct omap_id omap_ids[] __initdata = { |
| { .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type = 0x03100000}, |
| { .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100}, |
| { .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300}, |
| { .jtag_id = 0xb62c, .die_rev = 0x1, .omap_id = 0x03320500, .type = 0x08500000}, |
| { .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000}, |
| { .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x16100000}, |
| { .jtag_id = 0xb576, .die_rev = 0x2, .omap_id = 0x03320100, .type = 0x16110000}, |
| { .jtag_id = 0xb576, .die_rev = 0x3, .omap_id = 0x03320100, .type = 0x16100c00}, |
| { .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320200, .type = 0x16100d00}, |
| { .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type = 0x1610ef00}, |
| { .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type = 0x1610ef00}, |
| { .jtag_id = 0xb576, .die_rev = 0x1, .omap_id = 0x03320100, .type = 0x16110000}, |
| { .jtag_id = 0xb58c, .die_rev = 0x2, .omap_id = 0x03320200, .type = 0x16110b00}, |
| { .jtag_id = 0xb58c, .die_rev = 0x3, .omap_id = 0x03320200, .type = 0x16110c00}, |
| { .jtag_id = 0xb65f, .die_rev = 0x0, .omap_id = 0x03320400, .type = 0x16212300}, |
| { .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320400, .type = 0x16212300}, |
| { .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320500, .type = 0x16212300}, |
| { .jtag_id = 0xb5f7, .die_rev = 0x0, .omap_id = 0x03330000, .type = 0x17100000}, |
| { .jtag_id = 0xb5f7, .die_rev = 0x1, .omap_id = 0x03330100, .type = 0x17100000}, |
| { .jtag_id = 0xb5f7, .die_rev = 0x2, .omap_id = 0x03330100, .type = 0x17100000}, |
| }; |
| |
| unsigned int omap_rev(void) |
| { |
| return omap_revision; |
| } |
| EXPORT_SYMBOL(omap_rev); |
| |
| /* |
| * Get OMAP type from PROD_ID. |
| * 1710 has the PROD_ID in bits 15:00, not in 16:01 as documented in TRM. |
| * 1510 PROD_ID is empty, and 1610 PROD_ID does not make sense. |
| * Undocumented register in TEST BLOCK is used as fallback; This seems to |
| * work on 1510, 1610 & 1710. The official way hopefully will work in future |
| * processors. |
| */ |
| static u16 __init omap_get_jtag_id(void) |
| { |
| u32 prod_id, omap_id; |
| |
| prod_id = omap_readl(OMAP_PRODUCTION_ID_1); |
| omap_id = omap_readl(OMAP32_ID_1); |
| |
| /* Check for unusable OMAP_PRODUCTION_ID_1 on 1611B/5912 and 730/850 */ |
| if (((prod_id >> 20) == 0) || (prod_id == omap_id)) |
| prod_id = 0; |
| else |
| prod_id &= 0xffff; |
| |
| if (prod_id) |
| return prod_id; |
| |
| /* Use OMAP32_ID_1 as fallback */ |
| prod_id = ((omap_id >> 12) & 0xffff); |
| |
| return prod_id; |
| } |
| |
| /* |
| * Get OMAP revision from DIE_REV. |
| * Early 1710 processors may have broken OMAP_DIE_ID, it contains PROD_ID. |
| * Undocumented register in the TEST BLOCK is used as fallback. |
| * REVISIT: This does not seem to work on 1510 |
| */ |
| static u8 __init omap_get_die_rev(void) |
| { |
| u32 die_rev; |
| |
| die_rev = omap_readl(OMAP_DIE_ID_1); |
| |
| /* Check for broken OMAP_DIE_ID on early 1710 */ |
| if (((die_rev >> 12) & 0xffff) == omap_get_jtag_id()) |
| die_rev = 0; |
| |
| die_rev = (die_rev >> 17) & 0xf; |
| if (die_rev) |
| return die_rev; |
| |
| die_rev = (omap_readl(OMAP32_ID_1) >> 28) & 0xf; |
| |
| return die_rev; |
| } |
| |
| void __init omap_check_revision(void) |
| { |
| int i; |
| u16 jtag_id; |
| u8 die_rev; |
| u32 omap_id; |
| u8 cpu_type; |
| |
| jtag_id = omap_get_jtag_id(); |
| die_rev = omap_get_die_rev(); |
| omap_id = omap_readl(OMAP32_ID_0); |
| |
| #ifdef DEBUG |
| printk(KERN_DEBUG "OMAP_DIE_ID_0: 0x%08x\n", omap_readl(OMAP_DIE_ID_0)); |
| printk(KERN_DEBUG "OMAP_DIE_ID_1: 0x%08x DIE_REV: %i\n", |
| omap_readl(OMAP_DIE_ID_1), |
| (omap_readl(OMAP_DIE_ID_1) >> 17) & 0xf); |
| printk(KERN_DEBUG "OMAP_PRODUCTION_ID_0: 0x%08x\n", |
| omap_readl(OMAP_PRODUCTION_ID_0)); |
| printk(KERN_DEBUG "OMAP_PRODUCTION_ID_1: 0x%08x JTAG_ID: 0x%04x\n", |
| omap_readl(OMAP_PRODUCTION_ID_1), |
| omap_readl(OMAP_PRODUCTION_ID_1) & 0xffff); |
| printk(KERN_DEBUG "OMAP32_ID_0: 0x%08x\n", omap_readl(OMAP32_ID_0)); |
| printk(KERN_DEBUG "OMAP32_ID_1: 0x%08x\n", omap_readl(OMAP32_ID_1)); |
| printk(KERN_DEBUG "JTAG_ID: 0x%04x DIE_REV: %i\n", jtag_id, die_rev); |
| #endif |
| |
| system_serial_high = omap_readl(OMAP_DIE_ID_0); |
| system_serial_low = omap_readl(OMAP_DIE_ID_1); |
| |
| /* First check only the major version in a safe way */ |
| for (i = 0; i < ARRAY_SIZE(omap_ids); i++) { |
| if (jtag_id == (omap_ids[i].jtag_id)) { |
| omap_revision = omap_ids[i].type; |
| break; |
| } |
| } |
| |
| /* Check if we can find the die revision */ |
| for (i = 0; i < ARRAY_SIZE(omap_ids); i++) { |
| if (jtag_id == omap_ids[i].jtag_id && die_rev == omap_ids[i].die_rev) { |
| omap_revision = omap_ids[i].type; |
| break; |
| } |
| } |
| |
| /* Finally check also the omap_id */ |
| for (i = 0; i < ARRAY_SIZE(omap_ids); i++) { |
| if (jtag_id == omap_ids[i].jtag_id |
| && die_rev == omap_ids[i].die_rev |
| && omap_id == omap_ids[i].omap_id) { |
| omap_revision = omap_ids[i].type; |
| break; |
| } |
| } |
| |
| /* Add the cpu class info (7xx, 15xx, 16xx, 24xx) */ |
| cpu_type = omap_revision >> 24; |
| |
| switch (cpu_type) { |
| case 0x07: |
| case 0x08: |
| omap_revision |= 0x07; |
| break; |
| case 0x03: |
| case 0x15: |
| omap_revision |= 0x15; |
| break; |
| case 0x16: |
| case 0x17: |
| omap_revision |= 0x16; |
| break; |
| default: |
| printk(KERN_INFO "Unknown OMAP cpu type: 0x%02x\n", cpu_type); |
| } |
| |
| pr_info("OMAP%04x", omap_revision >> 16); |
| if ((omap_revision >> 8) & 0xff) |
| pr_cont("%x", (omap_revision >> 8) & 0xff); |
| pr_cont(" revision %i handled as %02xxx id: %08x%08x\n", |
| die_rev, omap_revision & 0xff, system_serial_low, |
| system_serial_high); |
| } |
| |