blob: 672c655c7a8e7e4bea908ddcb5d74fc7c1549674 [file] [log] [blame]
/*
* Copyright (c) 2016 Intel Corporation
*
* Permission to use, copy, modify, distribute, and sell this software and its
* documentation for any purpose is hereby granted without fee, provided that
* the above copyright notice appear in all copies and that both that copyright
* notice and this permission notice appear in supporting documentation, and
* that the name of the copyright holders not be used in advertising or
* publicity pertaining to distribution of the software without specific,
* written prior permission. The copyright holders make no representations
* about the suitability of this software for any purpose. It is provided "as
* is" without express or implied warranty.
*
* THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
* EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
* DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
* OF THIS SOFTWARE.
*/
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <drm/drm_plane.h>
#include <drm/drm_drv.h>
#include <drm/drm_print.h>
#include <drm/drm_framebuffer.h>
#include <drm/drm_file.h>
#include <drm/drm_crtc.h>
#include <drm/drm_fourcc.h>
#include <drm/drm_managed.h>
#include <drm/drm_vblank.h>
#include "drm_crtc_internal.h"
/**
* DOC: overview
*
* A plane represents an image source that can be blended with or overlaid on
* top of a CRTC during the scanout process. Planes take their input data from a
* &drm_framebuffer object. The plane itself specifies the cropping and scaling
* of that image, and where it is placed on the visible area of a display
* pipeline, represented by &drm_crtc. A plane can also have additional
* properties that specify how the pixels are positioned and blended, like
* rotation or Z-position. All these properties are stored in &drm_plane_state.
*
* Unless explicitly specified (via CRTC property or otherwise), the active area
* of a CRTC will be black by default. This means portions of the active area
* which are not covered by a plane will be black, and alpha blending of any
* planes with the CRTC background will blend with black at the lowest zpos.
*
* To create a plane, a KMS drivers allocates and zeroes an instances of
* &struct drm_plane (possibly as part of a larger structure) and registers it
* with a call to drm_universal_plane_init().
*
* Each plane has a type, see enum drm_plane_type. A plane can be compatible
* with multiple CRTCs, see &drm_plane.possible_crtcs.
*
* Each CRTC must have a unique primary plane userspace can attach to enable
* the CRTC. In other words, userspace must be able to attach a different
* primary plane to each CRTC at the same time. Primary planes can still be
* compatible with multiple CRTCs. There must be exactly as many primary planes
* as there are CRTCs.
*
* Legacy uAPI doesn't expose the primary and cursor planes directly. DRM core
* relies on the driver to set the primary and optionally the cursor plane used
* for legacy IOCTLs. This is done by calling drm_crtc_init_with_planes(). All
* drivers must provide one primary plane per CRTC to avoid surprising legacy
* userspace too much.
*/
/**
* DOC: standard plane properties
*
* DRM planes have a few standardized properties:
*
* type:
* Immutable property describing the type of the plane.
*
* For user-space which has enabled the &DRM_CLIENT_CAP_ATOMIC capability,
* the plane type is just a hint and is mostly superseded by atomic
* test-only commits. The type hint can still be used to come up more
* easily with a plane configuration accepted by the driver.
*
* The value of this property can be one of the following:
*
* "Primary":
* To light up a CRTC, attaching a primary plane is the most likely to
* work if it covers the whole CRTC and doesn't have scaling or
* cropping set up.
*
* Drivers may support more features for the primary plane, user-space
* can find out with test-only atomic commits.
*
* Some primary planes are implicitly used by the kernel in the legacy
* IOCTLs &DRM_IOCTL_MODE_SETCRTC and &DRM_IOCTL_MODE_PAGE_FLIP.
* Therefore user-space must not mix explicit usage of any primary
* plane (e.g. through an atomic commit) with these legacy IOCTLs.
*
* "Cursor":
* To enable this plane, using a framebuffer configured without scaling
* or cropping and with the following properties is the most likely to
* work:
*
* - If the driver provides the capabilities &DRM_CAP_CURSOR_WIDTH and
* &DRM_CAP_CURSOR_HEIGHT, create the framebuffer with this size.
* Otherwise, create a framebuffer with the size 64x64.
* - If the driver doesn't support modifiers, create a framebuffer with
* a linear layout. Otherwise, use the IN_FORMATS plane property.
*
* Drivers may support more features for the cursor plane, user-space
* can find out with test-only atomic commits.
*
* Some cursor planes are implicitly used by the kernel in the legacy
* IOCTLs &DRM_IOCTL_MODE_CURSOR and &DRM_IOCTL_MODE_CURSOR2.
* Therefore user-space must not mix explicit usage of any cursor
* plane (e.g. through an atomic commit) with these legacy IOCTLs.
*
* Some drivers may support cursors even if no cursor plane is exposed.
* In this case, the legacy cursor IOCTLs can be used to configure the
* cursor.
*
* "Overlay":
* Neither primary nor cursor.
*
* Overlay planes are the only planes exposed when the
* &DRM_CLIENT_CAP_UNIVERSAL_PLANES capability is disabled.
*
* IN_FORMATS:
* Blob property which contains the set of buffer format and modifier
* pairs supported by this plane. The blob is a struct
* drm_format_modifier_blob. Without this property the plane doesn't
* support buffers with modifiers. Userspace cannot change this property.
*
* Note that userspace can check the &DRM_CAP_ADDFB2_MODIFIERS driver
* capability for general modifier support. If this flag is set then every
* plane will have the IN_FORMATS property, even when it only supports
* DRM_FORMAT_MOD_LINEAR. Before linux kernel release v5.1 there have been
* various bugs in this area with inconsistencies between the capability
* flag and per-plane properties.
*/
static unsigned int drm_num_planes(struct drm_device *dev)
{
unsigned int num = 0;
struct drm_plane *tmp;
drm_for_each_plane(tmp, dev) {
num++;
}
return num;
}
static inline u32 *
formats_ptr(struct drm_format_modifier_blob *blob)
{
return (u32 *)(((char *)blob) + blob->formats_offset);
}
static inline struct drm_format_modifier *
modifiers_ptr(struct drm_format_modifier_blob *blob)
{
return (struct drm_format_modifier *)(((char *)blob) + blob->modifiers_offset);
}
static int create_in_format_blob(struct drm_device *dev, struct drm_plane *plane)
{
const struct drm_mode_config *config = &dev->mode_config;
struct drm_property_blob *blob;
struct drm_format_modifier *mod;
size_t blob_size, formats_size, modifiers_size;
struct drm_format_modifier_blob *blob_data;
unsigned int i, j;
formats_size = sizeof(__u32) * plane->format_count;
if (WARN_ON(!formats_size)) {
/* 0 formats are never expected */
return 0;
}
modifiers_size =
sizeof(struct drm_format_modifier) * plane->modifier_count;
blob_size = sizeof(struct drm_format_modifier_blob);
/* Modifiers offset is a pointer to a struct with a 64 bit field so it
* should be naturally aligned to 8B.
*/
BUILD_BUG_ON(sizeof(struct drm_format_modifier_blob) % 8);
blob_size += ALIGN(formats_size, 8);
blob_size += modifiers_size;
blob = drm_property_create_blob(dev, blob_size, NULL);
if (IS_ERR(blob))
return -1;
blob_data = blob->data;
blob_data->version = FORMAT_BLOB_CURRENT;
blob_data->count_formats = plane->format_count;
blob_data->formats_offset = sizeof(struct drm_format_modifier_blob);
blob_data->count_modifiers = plane->modifier_count;
blob_data->modifiers_offset =
ALIGN(blob_data->formats_offset + formats_size, 8);
memcpy(formats_ptr(blob_data), plane->format_types, formats_size);
mod = modifiers_ptr(blob_data);
for (i = 0; i < plane->modifier_count; i++) {
for (j = 0; j < plane->format_count; j++) {
if (!plane->funcs->format_mod_supported ||
plane->funcs->format_mod_supported(plane,
plane->format_types[j],
plane->modifiers[i])) {
mod->formats |= 1ULL << j;
}
}
mod->modifier = plane->modifiers[i];
mod->offset = 0;
mod->pad = 0;
mod++;
}
drm_object_attach_property(&plane->base, config->modifiers_property,
blob->base.id);
return 0;
}
/**
* DOC: hotspot properties
*
* HOTSPOT_X: property to set mouse hotspot x offset.
* HOTSPOT_Y: property to set mouse hotspot y offset.
*
* When the plane is being used as a cursor image to display a mouse pointer,
* the "hotspot" is the offset within the cursor image where mouse events
* are expected to go.
*
* Positive values move the hotspot from the top-left corner of the cursor
* plane towards the right and bottom.
*
* Most display drivers do not need this information because the
* hotspot is not actually connected to anything visible on screen.
* However, this is necessary for display drivers like the para-virtualized
* drivers (eg qxl, vbox, virtio, vmwgfx), that are attached to a user console
* with a mouse pointer. Since these consoles are often being remoted over a
* network, they would otherwise have to wait to display the pointer movement to
* the user until a full network round-trip has occurred. New mouse events have
* to be sent from the user's console, over the network to the virtual input
* devices, forwarded to the desktop for processing, and then the cursor plane's
* position can be updated and sent back to the user's console over the network.
* Instead, with the hotspot information, the console can anticipate the new
* location, and draw the mouse cursor there before the confirmation comes in.
* To do that correctly, the user's console must be able predict how the
* desktop will process mouse events, which normally requires the desktop's
* mouse topology information, ie where each CRTC sits in the mouse coordinate
* space. This is typically sent to the para-virtualized drivers using some
* driver-specific method, and the driver then forwards it to the console by
* way of the virtual display device or hypervisor.
*
* The assumption is generally made that there is only one cursor plane being
* used this way at a time, and that the desktop is feeding all mouse devices
* into the same global pointer. Para-virtualized drivers that require this
* should only be exposing a single cursor plane, or find some other way
* to coordinate with a userspace desktop that supports multiple pointers.
* If the hotspot properties are set, the cursor plane is therefore assumed to be
* used only for displaying a mouse cursor image, and the position of the combined
* cursor plane + offset can therefore be used for coordinating with input from a
* mouse device.
*
* The cursor will then be drawn either at the location of the plane in the CRTC
* console, or as a free-floating cursor plane on the user's console
* corresponding to their desktop mouse position.
*
* DRM clients which would like to work correctly on drivers which expose
* hotspot properties should advertise DRM_CLIENT_CAP_CURSOR_PLANE_HOTSPOT.
* Setting this property on drivers which do not special case
* cursor planes will return EOPNOTSUPP, which can be used by userspace to
* gauge requirements of the hardware/drivers they're running on. Advertising
* DRM_CLIENT_CAP_CURSOR_PLANE_HOTSPOT implies that the userspace client will be
* correctly setting the hotspot properties.
*/
/**
* drm_plane_create_hotspot_properties - creates the mouse hotspot
* properties and attaches them to the given cursor plane
*
* @plane: drm cursor plane
*
* This function enables the mouse hotspot property on a given
* cursor plane. Look at the documentation for hotspot properties
* to get a better understanding for what they're used for.
*
* RETURNS:
* Zero for success or -errno
*/
static int drm_plane_create_hotspot_properties(struct drm_plane *plane)
{
struct drm_property *prop_x;
struct drm_property *prop_y;
drm_WARN_ON(plane->dev,
!drm_core_check_feature(plane->dev,
DRIVER_CURSOR_HOTSPOT));
prop_x = drm_property_create_signed_range(plane->dev, 0, "HOTSPOT_X",
INT_MIN, INT_MAX);
if (IS_ERR(prop_x))
return PTR_ERR(prop_x);
prop_y = drm_property_create_signed_range(plane->dev, 0, "HOTSPOT_Y",
INT_MIN, INT_MAX);
if (IS_ERR(prop_y)) {
drm_property_destroy(plane->dev, prop_x);
return PTR_ERR(prop_y);
}
drm_object_attach_property(&plane->base, prop_x, 0);
drm_object_attach_property(&plane->base, prop_y, 0);
plane->hotspot_x_property = prop_x;
plane->hotspot_y_property = prop_y;
return 0;
}
__printf(9, 0)
static int __drm_universal_plane_init(struct drm_device *dev,
struct drm_plane *plane,
uint32_t possible_crtcs,
const struct drm_plane_funcs *funcs,
const uint32_t *formats,
unsigned int format_count,
const uint64_t *format_modifiers,
enum drm_plane_type type,
const char *name, va_list ap)
{
struct drm_mode_config *config = &dev->mode_config;
static const uint64_t default_modifiers[] = {
DRM_FORMAT_MOD_LINEAR,
};
unsigned int format_modifier_count = 0;
int ret;
/* plane index is used with 32bit bitmasks */
if (WARN_ON(config->num_total_plane >= 32))
return -EINVAL;
/*
* First driver to need more than 64 formats needs to fix this. Each
* format is encoded as a bit and the current code only supports a u64.
*/
if (WARN_ON(format_count > 64))
return -EINVAL;
WARN_ON(drm_drv_uses_atomic_modeset(dev) &&
(!funcs->atomic_destroy_state ||
!funcs->atomic_duplicate_state));
ret = drm_mode_object_add(dev, &plane->base, DRM_MODE_OBJECT_PLANE);
if (ret)
return ret;
drm_modeset_lock_init(&plane->mutex);
plane->base.properties = &plane->properties;
plane->dev = dev;
plane->funcs = funcs;
plane->format_types = kmalloc_array(format_count, sizeof(uint32_t),
GFP_KERNEL);
if (!plane->format_types) {
DRM_DEBUG_KMS("out of memory when allocating plane\n");
drm_mode_object_unregister(dev, &plane->base);
return -ENOMEM;
}
if (format_modifiers) {
const uint64_t *temp_modifiers = format_modifiers;
while (*temp_modifiers++ != DRM_FORMAT_MOD_INVALID)
format_modifier_count++;
} else {
if (!dev->mode_config.fb_modifiers_not_supported) {
format_modifiers = default_modifiers;
format_modifier_count = ARRAY_SIZE(default_modifiers);
}
}
/* autoset the cap and check for consistency across all planes */
drm_WARN_ON(dev, config->fb_modifiers_not_supported &&
format_modifier_count);
plane->modifier_count = format_modifier_count;
plane->modifiers = kmalloc_array(format_modifier_count,
sizeof(format_modifiers[0]),
GFP_KERNEL);
if (format_modifier_count && !plane->modifiers) {
DRM_DEBUG_KMS("out of memory when allocating plane\n");
kfree(plane->format_types);
drm_mode_object_unregister(dev, &plane->base);
return -ENOMEM;
}
if (name) {
plane->name = kvasprintf(GFP_KERNEL, name, ap);
} else {
plane->name = kasprintf(GFP_KERNEL, "plane-%d",
drm_num_planes(dev));
}
if (!plane->name) {
kfree(plane->format_types);
kfree(plane->modifiers);
drm_mode_object_unregister(dev, &plane->base);
return -ENOMEM;
}
memcpy(plane->format_types, formats, format_count * sizeof(uint32_t));
plane->format_count = format_count;
memcpy(plane->modifiers, format_modifiers,
format_modifier_count * sizeof(format_modifiers[0]));
plane->possible_crtcs = possible_crtcs;
plane->type = type;
list_add_tail(&plane->head, &config->plane_list);
plane->index = config->num_total_plane++;
drm_object_attach_property(&plane->base,
config->plane_type_property,
plane->type);
if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
drm_object_attach_property(&plane->base, config->prop_fb_id, 0);
drm_object_attach_property(&plane->base, config->prop_in_fence_fd, -1);
drm_object_attach_property(&plane->base, config->prop_crtc_id, 0);
drm_object_attach_property(&plane->base, config->prop_crtc_x, 0);
drm_object_attach_property(&plane->base, config->prop_crtc_y, 0);
drm_object_attach_property(&plane->base, config->prop_crtc_w, 0);
drm_object_attach_property(&plane->base, config->prop_crtc_h, 0);
drm_object_attach_property(&plane->base, config->prop_src_x, 0);
drm_object_attach_property(&plane->base, config->prop_src_y, 0);
drm_object_attach_property(&plane->base, config->prop_src_w, 0);
drm_object_attach_property(&plane->base, config->prop_src_h, 0);
}
if (drm_core_check_feature(dev, DRIVER_CURSOR_HOTSPOT) &&
type == DRM_PLANE_TYPE_CURSOR) {
drm_plane_create_hotspot_properties(plane);
}
if (format_modifier_count)
create_in_format_blob(dev, plane);
return 0;
}
/**
* drm_universal_plane_init - Initialize a new universal plane object
* @dev: DRM device
* @plane: plane object to init
* @possible_crtcs: bitmask of possible CRTCs
* @funcs: callbacks for the new plane
* @formats: array of supported formats (DRM_FORMAT\_\*)
* @format_count: number of elements in @formats
* @format_modifiers: array of struct drm_format modifiers terminated by
* DRM_FORMAT_MOD_INVALID
* @type: type of plane (overlay, primary, cursor)
* @name: printf style format string for the plane name, or NULL for default name
*
* Initializes a plane object of type @type. The &drm_plane_funcs.destroy hook
* should call drm_plane_cleanup() and kfree() the plane structure. The plane
* structure should not be allocated with devm_kzalloc().
*
* Note: consider using drmm_universal_plane_alloc() instead of
* drm_universal_plane_init() to let the DRM managed resource infrastructure
* take care of cleanup and deallocation.
*
* Drivers that only support the DRM_FORMAT_MOD_LINEAR modifier support may set
* @format_modifiers to NULL. The plane will advertise the linear modifier.
*
* Returns:
* Zero on success, error code on failure.
*/
int drm_universal_plane_init(struct drm_device *dev, struct drm_plane *plane,
uint32_t possible_crtcs,
const struct drm_plane_funcs *funcs,
const uint32_t *formats, unsigned int format_count,
const uint64_t *format_modifiers,
enum drm_plane_type type,
const char *name, ...)
{
va_list ap;
int ret;
WARN_ON(!funcs->destroy);
va_start(ap, name);
ret = __drm_universal_plane_init(dev, plane, possible_crtcs, funcs,
formats, format_count, format_modifiers,
type, name, ap);
va_end(ap);
return ret;
}
EXPORT_SYMBOL(drm_universal_plane_init);
static void drmm_universal_plane_alloc_release(struct drm_device *dev, void *ptr)
{
struct drm_plane *plane = ptr;
if (WARN_ON(!plane->dev))
return;
drm_plane_cleanup(plane);
}
void *__drmm_universal_plane_alloc(struct drm_device *dev, size_t size,
size_t offset, uint32_t possible_crtcs,
const struct drm_plane_funcs *funcs,
const uint32_t *formats, unsigned int format_count,
const uint64_t *format_modifiers,
enum drm_plane_type type,
const char *name, ...)
{
void *container;
struct drm_plane *plane;
va_list ap;
int ret;
if (WARN_ON(!funcs || funcs->destroy))
return ERR_PTR(-EINVAL);
container = drmm_kzalloc(dev, size, GFP_KERNEL);
if (!container)
return ERR_PTR(-ENOMEM);
plane = container + offset;
va_start(ap, name);
ret = __drm_universal_plane_init(dev, plane, possible_crtcs, funcs,
formats, format_count, format_modifiers,
type, name, ap);
va_end(ap);
if (ret)
return ERR_PTR(ret);
ret = drmm_add_action_or_reset(dev, drmm_universal_plane_alloc_release,
plane);
if (ret)
return ERR_PTR(ret);
return container;
}
EXPORT_SYMBOL(__drmm_universal_plane_alloc);
void *__drm_universal_plane_alloc(struct drm_device *dev, size_t size,
size_t offset, uint32_t possible_crtcs,
const struct drm_plane_funcs *funcs,
const uint32_t *formats, unsigned int format_count,
const uint64_t *format_modifiers,
enum drm_plane_type type,
const char *name, ...)
{
void *container;
struct drm_plane *plane;
va_list ap;
int ret;
if (drm_WARN_ON(dev, !funcs))
return ERR_PTR(-EINVAL);
container = kzalloc(size, GFP_KERNEL);
if (!container)
return ERR_PTR(-ENOMEM);
plane = container + offset;
va_start(ap, name);
ret = __drm_universal_plane_init(dev, plane, possible_crtcs, funcs,
formats, format_count, format_modifiers,
type, name, ap);
va_end(ap);
if (ret)
goto err_kfree;
return container;
err_kfree:
kfree(container);
return ERR_PTR(ret);
}
EXPORT_SYMBOL(__drm_universal_plane_alloc);
int drm_plane_register_all(struct drm_device *dev)
{
unsigned int num_planes = 0;
unsigned int num_zpos = 0;
struct drm_plane *plane;
int ret = 0;
drm_for_each_plane(plane, dev) {
if (plane->funcs->late_register)
ret = plane->funcs->late_register(plane);
if (ret)
return ret;
if (plane->zpos_property)
num_zpos++;
num_planes++;
}
drm_WARN(dev, num_zpos && num_planes != num_zpos,
"Mixing planes with and without zpos property is invalid\n");
return 0;
}
void drm_plane_unregister_all(struct drm_device *dev)
{
struct drm_plane *plane;
drm_for_each_plane(plane, dev) {
if (plane->funcs->early_unregister)
plane->funcs->early_unregister(plane);
}
}
/**
* drm_plane_cleanup - Clean up the core plane usage
* @plane: plane to cleanup
*
* This function cleans up @plane and removes it from the DRM mode setting
* core. Note that the function does *not* free the plane structure itself,
* this is the responsibility of the caller.
*/
void drm_plane_cleanup(struct drm_plane *plane)
{
struct drm_device *dev = plane->dev;
drm_modeset_lock_fini(&plane->mutex);
kfree(plane->format_types);
kfree(plane->modifiers);
drm_mode_object_unregister(dev, &plane->base);
BUG_ON(list_empty(&plane->head));
/* Note that the plane_list is considered to be static; should we
* remove the drm_plane at runtime we would have to decrement all
* the indices on the drm_plane after us in the plane_list.
*/
list_del(&plane->head);
dev->mode_config.num_total_plane--;
WARN_ON(plane->state && !plane->funcs->atomic_destroy_state);
if (plane->state && plane->funcs->atomic_destroy_state)
plane->funcs->atomic_destroy_state(plane, plane->state);
kfree(plane->name);
memset(plane, 0, sizeof(*plane));
}
EXPORT_SYMBOL(drm_plane_cleanup);
/**
* drm_plane_from_index - find the registered plane at an index
* @dev: DRM device
* @idx: index of registered plane to find for
*
* Given a plane index, return the registered plane from DRM device's
* list of planes with matching index. This is the inverse of drm_plane_index().
*/
struct drm_plane *
drm_plane_from_index(struct drm_device *dev, int idx)
{
struct drm_plane *plane;
drm_for_each_plane(plane, dev)
if (idx == plane->index)
return plane;
return NULL;
}
EXPORT_SYMBOL(drm_plane_from_index);
/**
* drm_plane_force_disable - Forcibly disable a plane
* @plane: plane to disable
*
* Forces the plane to be disabled.
*
* Used when the plane's current framebuffer is destroyed,
* and when restoring fbdev mode.
*
* Note that this function is not suitable for atomic drivers, since it doesn't
* wire through the lock acquisition context properly and hence can't handle
* retries or driver private locks. You probably want to use
* drm_atomic_helper_disable_plane() or
* drm_atomic_helper_disable_planes_on_crtc() instead.
*/
void drm_plane_force_disable(struct drm_plane *plane)
{
int ret;
if (!plane->fb)
return;
WARN_ON(drm_drv_uses_atomic_modeset(plane->dev));
plane->old_fb = plane->fb;
ret = plane->funcs->disable_plane(plane, NULL);
if (ret) {
DRM_ERROR("failed to disable plane with busy fb\n");
plane->old_fb = NULL;
return;
}
/* disconnect the plane from the fb and crtc: */
drm_framebuffer_put(plane->old_fb);
plane->old_fb = NULL;
plane->fb = NULL;
plane->crtc = NULL;
}
EXPORT_SYMBOL(drm_plane_force_disable);
/**
* drm_mode_plane_set_obj_prop - set the value of a property
* @plane: drm plane object to set property value for
* @property: property to set
* @value: value the property should be set to
*
* This functions sets a given property on a given plane object. This function
* calls the driver's ->set_property callback and changes the software state of
* the property if the callback succeeds.
*
* Returns:
* Zero on success, error code on failure.
*/
int drm_mode_plane_set_obj_prop(struct drm_plane *plane,
struct drm_property *property,
uint64_t value)
{
int ret = -EINVAL;
struct drm_mode_object *obj = &plane->base;
if (plane->funcs->set_property)
ret = plane->funcs->set_property(plane, property, value);
if (!ret)
drm_object_property_set_value(obj, property, value);
return ret;
}
EXPORT_SYMBOL(drm_mode_plane_set_obj_prop);
int drm_mode_getplane_res(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_mode_get_plane_res *plane_resp = data;
struct drm_plane *plane;
uint32_t __user *plane_ptr;
int count = 0;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EOPNOTSUPP;
plane_ptr = u64_to_user_ptr(plane_resp->plane_id_ptr);
/*
* This ioctl is called twice, once to determine how much space is
* needed, and the 2nd time to fill it.
*/
drm_for_each_plane(plane, dev) {
/*
* Unless userspace set the 'universal planes'
* capability bit, only advertise overlays.
*/
if (plane->type != DRM_PLANE_TYPE_OVERLAY &&
!file_priv->universal_planes)
continue;
/*
* If we're running on a virtualized driver then,
* unless userspace advertizes support for the
* virtualized cursor plane, disable cursor planes
* because they'll be broken due to missing cursor
* hotspot info.
*/
if (plane->type == DRM_PLANE_TYPE_CURSOR &&
drm_core_check_feature(dev, DRIVER_CURSOR_HOTSPOT) &&
file_priv->atomic &&
!file_priv->supports_virtualized_cursor_plane)
continue;
if (drm_lease_held(file_priv, plane->base.id)) {
if (count < plane_resp->count_planes &&
put_user(plane->base.id, plane_ptr + count))
return -EFAULT;
count++;
}
}
plane_resp->count_planes = count;
return 0;
}
int drm_mode_getplane(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_mode_get_plane *plane_resp = data;
struct drm_plane *plane;
uint32_t __user *format_ptr;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EOPNOTSUPP;
plane = drm_plane_find(dev, file_priv, plane_resp->plane_id);
if (!plane)
return -ENOENT;
drm_modeset_lock(&plane->mutex, NULL);
if (plane->state && plane->state->crtc && drm_lease_held(file_priv, plane->state->crtc->base.id))
plane_resp->crtc_id = plane->state->crtc->base.id;
else if (!plane->state && plane->crtc && drm_lease_held(file_priv, plane->crtc->base.id))
plane_resp->crtc_id = plane->crtc->base.id;
else
plane_resp->crtc_id = 0;
if (plane->state && plane->state->fb)
plane_resp->fb_id = plane->state->fb->base.id;
else if (!plane->state && plane->fb)
plane_resp->fb_id = plane->fb->base.id;
else
plane_resp->fb_id = 0;
drm_modeset_unlock(&plane->mutex);
plane_resp->plane_id = plane->base.id;
plane_resp->possible_crtcs = drm_lease_filter_crtcs(file_priv,
plane->possible_crtcs);
plane_resp->gamma_size = 0;
/*
* This ioctl is called twice, once to determine how much space is
* needed, and the 2nd time to fill it.
*/
if (plane->format_count &&
(plane_resp->count_format_types >= plane->format_count)) {
format_ptr = (uint32_t __user *)(unsigned long)plane_resp->format_type_ptr;
if (copy_to_user(format_ptr,
plane->format_types,
sizeof(uint32_t) * plane->format_count)) {
return -EFAULT;
}
}
plane_resp->count_format_types = plane->format_count;
return 0;
}
int drm_plane_check_pixel_format(struct drm_plane *plane,
u32 format, u64 modifier)
{
unsigned int i;
for (i = 0; i < plane->format_count; i++) {
if (format == plane->format_types[i])
break;
}
if (i == plane->format_count)
return -EINVAL;
if (plane->funcs->format_mod_supported) {
if (!plane->funcs->format_mod_supported(plane, format, modifier))
return -EINVAL;
} else {
if (!plane->modifier_count)
return 0;
for (i = 0; i < plane->modifier_count; i++) {
if (modifier == plane->modifiers[i])
break;
}
if (i == plane->modifier_count)
return -EINVAL;
}
return 0;
}
static int __setplane_check(struct drm_plane *plane,
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
int32_t crtc_x, int32_t crtc_y,
uint32_t crtc_w, uint32_t crtc_h,
uint32_t src_x, uint32_t src_y,
uint32_t src_w, uint32_t src_h)
{
int ret;
/* Check whether this plane is usable on this CRTC */
if (!(plane->possible_crtcs & drm_crtc_mask(crtc))) {
DRM_DEBUG_KMS("Invalid crtc for plane\n");
return -EINVAL;
}
/* Check whether this plane supports the fb pixel format. */
ret = drm_plane_check_pixel_format(plane, fb->format->format,
fb->modifier);
if (ret) {
DRM_DEBUG_KMS("Invalid pixel format %p4cc, modifier 0x%llx\n",
&fb->format->format, fb->modifier);
return ret;
}
/* Give drivers some help against integer overflows */
if (crtc_w > INT_MAX ||
crtc_x > INT_MAX - (int32_t) crtc_w ||
crtc_h > INT_MAX ||
crtc_y > INT_MAX - (int32_t) crtc_h) {
DRM_DEBUG_KMS("Invalid CRTC coordinates %ux%u+%d+%d\n",
crtc_w, crtc_h, crtc_x, crtc_y);
return -ERANGE;
}
ret = drm_framebuffer_check_src_coords(src_x, src_y, src_w, src_h, fb);
if (ret)
return ret;
return 0;
}
/**
* drm_any_plane_has_format - Check whether any plane supports this format and modifier combination
* @dev: DRM device
* @format: pixel format (DRM_FORMAT_*)
* @modifier: data layout modifier
*
* Returns:
* Whether at least one plane supports the specified format and modifier combination.
*/
bool drm_any_plane_has_format(struct drm_device *dev,
u32 format, u64 modifier)
{
struct drm_plane *plane;
drm_for_each_plane(plane, dev) {
if (drm_plane_check_pixel_format(plane, format, modifier) == 0)
return true;
}
return false;
}
EXPORT_SYMBOL(drm_any_plane_has_format);
/*
* __setplane_internal - setplane handler for internal callers
*
* This function will take a reference on the new fb for the plane
* on success.
*
* src_{x,y,w,h} are provided in 16.16 fixed point format
*/
static int __setplane_internal(struct drm_plane *plane,
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
int32_t crtc_x, int32_t crtc_y,
uint32_t crtc_w, uint32_t crtc_h,
/* src_{x,y,w,h} values are 16.16 fixed point */
uint32_t src_x, uint32_t src_y,
uint32_t src_w, uint32_t src_h,
struct drm_modeset_acquire_ctx *ctx)
{
int ret = 0;
WARN_ON(drm_drv_uses_atomic_modeset(plane->dev));
/* No fb means shut it down */
if (!fb) {
plane->old_fb = plane->fb;
ret = plane->funcs->disable_plane(plane, ctx);
if (!ret) {
plane->crtc = NULL;
plane->fb = NULL;
} else {
plane->old_fb = NULL;
}
goto out;
}
ret = __setplane_check(plane, crtc, fb,
crtc_x, crtc_y, crtc_w, crtc_h,
src_x, src_y, src_w, src_h);
if (ret)
goto out;
plane->old_fb = plane->fb;
ret = plane->funcs->update_plane(plane, crtc, fb,
crtc_x, crtc_y, crtc_w, crtc_h,
src_x, src_y, src_w, src_h, ctx);
if (!ret) {
plane->crtc = crtc;
plane->fb = fb;
drm_framebuffer_get(plane->fb);
} else {
plane->old_fb = NULL;
}
out:
if (plane->old_fb)
drm_framebuffer_put(plane->old_fb);
plane->old_fb = NULL;
return ret;
}
static int __setplane_atomic(struct drm_plane *plane,
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
int32_t crtc_x, int32_t crtc_y,
uint32_t crtc_w, uint32_t crtc_h,
uint32_t src_x, uint32_t src_y,
uint32_t src_w, uint32_t src_h,
struct drm_modeset_acquire_ctx *ctx)
{
int ret;
WARN_ON(!drm_drv_uses_atomic_modeset(plane->dev));
/* No fb means shut it down */
if (!fb)
return plane->funcs->disable_plane(plane, ctx);
/*
* FIXME: This is redundant with drm_atomic_plane_check(),
* but the legacy cursor/"async" .update_plane() tricks
* don't call that so we still need this here. Should remove
* this when all .update_plane() implementations have been
* fixed to call drm_atomic_plane_check().
*/
ret = __setplane_check(plane, crtc, fb,
crtc_x, crtc_y, crtc_w, crtc_h,
src_x, src_y, src_w, src_h);
if (ret)
return ret;
return plane->funcs->update_plane(plane, crtc, fb,
crtc_x, crtc_y, crtc_w, crtc_h,
src_x, src_y, src_w, src_h, ctx);
}
static int setplane_internal(struct drm_plane *plane,
struct drm_crtc *crtc,
struct drm_framebuffer *fb,
int32_t crtc_x, int32_t crtc_y,
uint32_t crtc_w, uint32_t crtc_h,
/* src_{x,y,w,h} values are 16.16 fixed point */
uint32_t src_x, uint32_t src_y,
uint32_t src_w, uint32_t src_h)
{
struct drm_modeset_acquire_ctx ctx;
int ret;
DRM_MODESET_LOCK_ALL_BEGIN(plane->dev, ctx,
DRM_MODESET_ACQUIRE_INTERRUPTIBLE, ret);
if (drm_drv_uses_atomic_modeset(plane->dev))
ret = __setplane_atomic(plane, crtc, fb,
crtc_x, crtc_y, crtc_w, crtc_h,
src_x, src_y, src_w, src_h, &ctx);
else
ret = __setplane_internal(plane, crtc, fb,
crtc_x, crtc_y, crtc_w, crtc_h,
src_x, src_y, src_w, src_h, &ctx);
DRM_MODESET_LOCK_ALL_END(plane->dev, ctx, ret);
return ret;
}
int drm_mode_setplane(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_mode_set_plane *plane_req = data;
struct drm_plane *plane;
struct drm_crtc *crtc = NULL;
struct drm_framebuffer *fb = NULL;
int ret;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EOPNOTSUPP;
/*
* First, find the plane, crtc, and fb objects. If not available,
* we don't bother to call the driver.
*/
plane = drm_plane_find(dev, file_priv, plane_req->plane_id);
if (!plane) {
DRM_DEBUG_KMS("Unknown plane ID %d\n",
plane_req->plane_id);
return -ENOENT;
}
if (plane_req->fb_id) {
fb = drm_framebuffer_lookup(dev, file_priv, plane_req->fb_id);
if (!fb) {
DRM_DEBUG_KMS("Unknown framebuffer ID %d\n",
plane_req->fb_id);
return -ENOENT;
}
crtc = drm_crtc_find(dev, file_priv, plane_req->crtc_id);
if (!crtc) {
drm_framebuffer_put(fb);
DRM_DEBUG_KMS("Unknown crtc ID %d\n",
plane_req->crtc_id);
return -ENOENT;
}
}
ret = setplane_internal(plane, crtc, fb,
plane_req->crtc_x, plane_req->crtc_y,
plane_req->crtc_w, plane_req->crtc_h,
plane_req->src_x, plane_req->src_y,
plane_req->src_w, plane_req->src_h);
if (fb)
drm_framebuffer_put(fb);
return ret;
}
static int drm_mode_cursor_universal(struct drm_crtc *crtc,
struct drm_mode_cursor2 *req,
struct drm_file *file_priv,
struct drm_modeset_acquire_ctx *ctx)
{
struct drm_device *dev = crtc->dev;
struct drm_plane *plane = crtc->cursor;
struct drm_framebuffer *fb = NULL;
struct drm_mode_fb_cmd2 fbreq = {
.width = req->width,
.height = req->height,
.pixel_format = DRM_FORMAT_ARGB8888,
.pitches = { req->width * 4 },
.handles = { req->handle },
};
int32_t crtc_x, crtc_y;
uint32_t crtc_w = 0, crtc_h = 0;
uint32_t src_w = 0, src_h = 0;
int ret = 0;
BUG_ON(!plane);
WARN_ON(plane->crtc != crtc && plane->crtc != NULL);
/*
* Obtain fb we'll be using (either new or existing) and take an extra
* reference to it if fb != null. setplane will take care of dropping
* the reference if the plane update fails.
*/
if (req->flags & DRM_MODE_CURSOR_BO) {
if (req->handle) {
fb = drm_internal_framebuffer_create(dev, &fbreq, file_priv);
if (IS_ERR(fb)) {
DRM_DEBUG_KMS("failed to wrap cursor buffer in drm framebuffer\n");
return PTR_ERR(fb);
}
if (plane->hotspot_x_property && plane->state)
plane->state->hotspot_x = req->hot_x;
if (plane->hotspot_y_property && plane->state)
plane->state->hotspot_y = req->hot_y;
} else {
fb = NULL;
}
} else {
if (plane->state)
fb = plane->state->fb;
else
fb = plane->fb;
if (fb)
drm_framebuffer_get(fb);
}
if (req->flags & DRM_MODE_CURSOR_MOVE) {
crtc_x = req->x;
crtc_y = req->y;
} else {
crtc_x = crtc->cursor_x;
crtc_y = crtc->cursor_y;
}
if (fb) {
crtc_w = fb->width;
crtc_h = fb->height;
src_w = fb->width << 16;
src_h = fb->height << 16;
}
if (drm_drv_uses_atomic_modeset(dev))
ret = __setplane_atomic(plane, crtc, fb,
crtc_x, crtc_y, crtc_w, crtc_h,
0, 0, src_w, src_h, ctx);
else
ret = __setplane_internal(plane, crtc, fb,
crtc_x, crtc_y, crtc_w, crtc_h,
0, 0, src_w, src_h, ctx);
if (fb)
drm_framebuffer_put(fb);
/* Update successful; save new cursor position, if necessary */
if (ret == 0 && req->flags & DRM_MODE_CURSOR_MOVE) {
crtc->cursor_x = req->x;
crtc->cursor_y = req->y;
}
return ret;
}
static int drm_mode_cursor_common(struct drm_device *dev,
struct drm_mode_cursor2 *req,
struct drm_file *file_priv)
{
struct drm_crtc *crtc;
struct drm_modeset_acquire_ctx ctx;
int ret = 0;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EOPNOTSUPP;
if (!req->flags || (~DRM_MODE_CURSOR_FLAGS & req->flags))
return -EINVAL;
crtc = drm_crtc_find(dev, file_priv, req->crtc_id);
if (!crtc) {
DRM_DEBUG_KMS("Unknown CRTC ID %d\n", req->crtc_id);
return -ENOENT;
}
drm_modeset_acquire_init(&ctx, DRM_MODESET_ACQUIRE_INTERRUPTIBLE);
retry:
ret = drm_modeset_lock(&crtc->mutex, &ctx);
if (ret)
goto out;
/*
* If this crtc has a universal cursor plane, call that plane's update
* handler rather than using legacy cursor handlers.
*/
if (crtc->cursor) {
ret = drm_modeset_lock(&crtc->cursor->mutex, &ctx);
if (ret)
goto out;
if (!drm_lease_held(file_priv, crtc->cursor->base.id)) {
ret = -EACCES;
goto out;
}
ret = drm_mode_cursor_universal(crtc, req, file_priv, &ctx);
goto out;
}
if (req->flags & DRM_MODE_CURSOR_BO) {
if (!crtc->funcs->cursor_set && !crtc->funcs->cursor_set2) {
ret = -ENXIO;
goto out;
}
/* Turns off the cursor if handle is 0 */
if (crtc->funcs->cursor_set2)
ret = crtc->funcs->cursor_set2(crtc, file_priv, req->handle,
req->width, req->height, req->hot_x, req->hot_y);
else
ret = crtc->funcs->cursor_set(crtc, file_priv, req->handle,
req->width, req->height);
}
if (req->flags & DRM_MODE_CURSOR_MOVE) {
if (crtc->funcs->cursor_move) {
ret = crtc->funcs->cursor_move(crtc, req->x, req->y);
} else {
ret = -EFAULT;
goto out;
}
}
out:
if (ret == -EDEADLK) {
ret = drm_modeset_backoff(&ctx);
if (!ret)
goto retry;
}
drm_modeset_drop_locks(&ctx);
drm_modeset_acquire_fini(&ctx);
return ret;
}
int drm_mode_cursor_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_cursor *req = data;
struct drm_mode_cursor2 new_req;
memcpy(&new_req, req, sizeof(struct drm_mode_cursor));
new_req.hot_x = new_req.hot_y = 0;
return drm_mode_cursor_common(dev, &new_req, file_priv);
}
/*
* Set the cursor configuration based on user request. This implements the 2nd
* version of the cursor ioctl, which allows userspace to additionally specify
* the hotspot of the pointer.
*/
int drm_mode_cursor2_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_cursor2 *req = data;
return drm_mode_cursor_common(dev, req, file_priv);
}
int drm_mode_page_flip_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv)
{
struct drm_mode_crtc_page_flip_target *page_flip = data;
struct drm_crtc *crtc;
struct drm_plane *plane;
struct drm_framebuffer *fb = NULL, *old_fb;
struct drm_pending_vblank_event *e = NULL;
u32 target_vblank = page_flip->sequence;
struct drm_modeset_acquire_ctx ctx;
int ret = -EINVAL;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EOPNOTSUPP;
if (page_flip->flags & ~DRM_MODE_PAGE_FLIP_FLAGS)
return -EINVAL;
if (page_flip->sequence != 0 && !(page_flip->flags & DRM_MODE_PAGE_FLIP_TARGET))
return -EINVAL;
/* Only one of the DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE/RELATIVE flags
* can be specified
*/
if ((page_flip->flags & DRM_MODE_PAGE_FLIP_TARGET) == DRM_MODE_PAGE_FLIP_TARGET)
return -EINVAL;
if ((page_flip->flags & DRM_MODE_PAGE_FLIP_ASYNC) && !dev->mode_config.async_page_flip)
return -EINVAL;
crtc = drm_crtc_find(dev, file_priv, page_flip->crtc_id);
if (!crtc)
return -ENOENT;
plane = crtc->primary;
if (!drm_lease_held(file_priv, plane->base.id))
return -EACCES;
if (crtc->funcs->page_flip_target) {
u32 current_vblank;
int r;
r = drm_crtc_vblank_get(crtc);
if (r)
return r;
current_vblank = (u32)drm_crtc_vblank_count(crtc);
switch (page_flip->flags & DRM_MODE_PAGE_FLIP_TARGET) {
case DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE:
if ((int)(target_vblank - current_vblank) > 1) {
DRM_DEBUG("Invalid absolute flip target %u, "
"must be <= %u\n", target_vblank,
current_vblank + 1);
drm_crtc_vblank_put(crtc);
return -EINVAL;
}
break;
case DRM_MODE_PAGE_FLIP_TARGET_RELATIVE:
if (target_vblank != 0 && target_vblank != 1) {
DRM_DEBUG("Invalid relative flip target %u, "
"must be 0 or 1\n", target_vblank);
drm_crtc_vblank_put(crtc);
return -EINVAL;
}
target_vblank += current_vblank;
break;
default:
target_vblank = current_vblank +
!(page_flip->flags & DRM_MODE_PAGE_FLIP_ASYNC);
break;
}
} else if (crtc->funcs->page_flip == NULL ||
(page_flip->flags & DRM_MODE_PAGE_FLIP_TARGET)) {
return -EINVAL;
}
drm_modeset_acquire_init(&ctx, DRM_MODESET_ACQUIRE_INTERRUPTIBLE);
retry:
ret = drm_modeset_lock(&crtc->mutex, &ctx);
if (ret)
goto out;
ret = drm_modeset_lock(&plane->mutex, &ctx);
if (ret)
goto out;
if (plane->state)
old_fb = plane->state->fb;
else
old_fb = plane->fb;
if (old_fb == NULL) {
/* The framebuffer is currently unbound, presumably
* due to a hotplug event, that userspace has not
* yet discovered.
*/
ret = -EBUSY;
goto out;
}
fb = drm_framebuffer_lookup(dev, file_priv, page_flip->fb_id);
if (!fb) {
ret = -ENOENT;
goto out;
}
if (plane->state) {
const struct drm_plane_state *state = plane->state;
ret = drm_framebuffer_check_src_coords(state->src_x,
state->src_y,
state->src_w,
state->src_h,
fb);
} else {
ret = drm_crtc_check_viewport(crtc, crtc->x, crtc->y,
&crtc->mode, fb);
}
if (ret)
goto out;
/*
* Only check the FOURCC format code, excluding modifiers. This is
* enough for all legacy drivers. Atomic drivers have their own
* checks in their ->atomic_check implementation, which will
* return -EINVAL if any hw or driver constraint is violated due
* to modifier changes.
*/
if (old_fb->format->format != fb->format->format) {
DRM_DEBUG_KMS("Page flip is not allowed to change frame buffer format.\n");
ret = -EINVAL;
goto out;
}
if (page_flip->flags & DRM_MODE_PAGE_FLIP_EVENT) {
e = kzalloc(sizeof *e, GFP_KERNEL);
if (!e) {
ret = -ENOMEM;
goto out;
}
e->event.base.type = DRM_EVENT_FLIP_COMPLETE;
e->event.base.length = sizeof(e->event);
e->event.vbl.user_data = page_flip->user_data;
e->event.vbl.crtc_id = crtc->base.id;
ret = drm_event_reserve_init(dev, file_priv, &e->base, &e->event.base);
if (ret) {
kfree(e);
e = NULL;
goto out;
}
}
plane->old_fb = plane->fb;
if (crtc->funcs->page_flip_target)
ret = crtc->funcs->page_flip_target(crtc, fb, e,
page_flip->flags,
target_vblank,
&ctx);
else
ret = crtc->funcs->page_flip(crtc, fb, e, page_flip->flags,
&ctx);
if (ret) {
if (page_flip->flags & DRM_MODE_PAGE_FLIP_EVENT)
drm_event_cancel_free(dev, &e->base);
/* Keep the old fb, don't unref it. */
plane->old_fb = NULL;
} else {
if (!plane->state) {
plane->fb = fb;
drm_framebuffer_get(fb);
}
}
out:
if (fb)
drm_framebuffer_put(fb);
fb = NULL;
if (plane->old_fb)
drm_framebuffer_put(plane->old_fb);
plane->old_fb = NULL;
if (ret == -EDEADLK) {
ret = drm_modeset_backoff(&ctx);
if (!ret)
goto retry;
}
drm_modeset_drop_locks(&ctx);
drm_modeset_acquire_fini(&ctx);
if (ret && crtc->funcs->page_flip_target)
drm_crtc_vblank_put(crtc);
return ret;
}
/**
* DOC: damage tracking
*
* FB_DAMAGE_CLIPS is an optional plane property which provides a means to
* specify a list of damage rectangles on a plane in framebuffer coordinates of
* the framebuffer attached to the plane. In current context damage is the area
* of plane framebuffer that has changed since last plane update (also called
* page-flip), irrespective of whether currently attached framebuffer is same as
* framebuffer attached during last plane update or not.
*
* FB_DAMAGE_CLIPS is a hint to kernel which could be helpful for some drivers
* to optimize internally especially for virtual devices where each framebuffer
* change needs to be transmitted over network, usb, etc.
*
* Since FB_DAMAGE_CLIPS is a hint so it is an optional property. User-space can
* ignore damage clips property and in that case driver will do a full plane
* update. In case damage clips are provided then it is guaranteed that the area
* inside damage clips will be updated to plane. For efficiency driver can do
* full update or can update more than specified in damage clips. Since driver
* is free to read more, user-space must always render the entire visible
* framebuffer. Otherwise there can be corruptions. Also, if a user-space
* provides damage clips which doesn't encompass the actual damage to
* framebuffer (since last plane update) can result in incorrect rendering.
*
* FB_DAMAGE_CLIPS is a blob property with the layout of blob data is simply an
* array of &drm_mode_rect. Unlike plane &drm_plane_state.src coordinates,
* damage clips are not in 16.16 fixed point. Similar to plane src in
* framebuffer, damage clips cannot be negative. In damage clip, x1/y1 are
* inclusive and x2/y2 are exclusive. While kernel does not error for overlapped
* damage clips, it is strongly discouraged.
*
* Drivers that are interested in damage interface for plane should enable
* FB_DAMAGE_CLIPS property by calling drm_plane_enable_fb_damage_clips().
* Drivers implementing damage can use drm_atomic_helper_damage_iter_init() and
* drm_atomic_helper_damage_iter_next() helper iterator function to get damage
* rectangles clipped to &drm_plane_state.src.
*
* Note that there are two types of damage handling: frame damage and buffer
* damage, the type of damage handling implemented depends on a driver's upload
* target. Drivers implementing a per-plane or per-CRTC upload target need to
* handle frame damage, while drivers implementing a per-buffer upload target
* need to handle buffer damage.
*
* The existing damage helpers only support the frame damage type, there is no
* buffer age support or similar damage accumulation algorithm implemented yet.
*
* Only drivers handling frame damage can use the mentioned damage helpers to
* iterate over the damaged regions. Drivers that handle buffer damage, must set
* &drm_plane_state.ignore_damage_clips for drm_atomic_helper_damage_iter_init()
* to know that damage clips should be ignored and return &drm_plane_state.src
* as the damage rectangle, to force a full plane update.
*
* Drivers with a per-buffer upload target could compare the &drm_plane_state.fb
* of the old and new plane states to determine if the framebuffer attached to a
* plane has changed or not since the last plane update. If &drm_plane_state.fb
* has changed, then &drm_plane_state.ignore_damage_clips must be set to true.
*
* That is because drivers with a per-plane upload target, expect the backing
* storage buffer to not change for a given plane. If the upload buffer changes
* between page flips, the new upload buffer has to be updated as a whole. This
* can be improved in the future if support for frame damage is added to the DRM
* damage helpers, similarly to how user-space already handle this case as it is
* explained in the following documents:
*
* https://registry.khronos.org/EGL/extensions/KHR/EGL_KHR_swap_buffers_with_damage.txt
* https://emersion.fr/blog/2019/intro-to-damage-tracking/
*/
/**
* drm_plane_enable_fb_damage_clips - Enables plane fb damage clips property.
* @plane: Plane on which to enable damage clips property.
*
* This function lets driver to enable the damage clips property on a plane.
*/
void drm_plane_enable_fb_damage_clips(struct drm_plane *plane)
{
struct drm_device *dev = plane->dev;
struct drm_mode_config *config = &dev->mode_config;
drm_object_attach_property(&plane->base, config->prop_fb_damage_clips,
0);
}
EXPORT_SYMBOL(drm_plane_enable_fb_damage_clips);
/**
* drm_plane_get_damage_clips_count - Returns damage clips count.
* @state: Plane state.
*
* Simple helper to get the number of &drm_mode_rect clips set by user-space
* during plane update.
*
* Return: Number of clips in plane fb_damage_clips blob property.
*/
unsigned int
drm_plane_get_damage_clips_count(const struct drm_plane_state *state)
{
return (state && state->fb_damage_clips) ?
state->fb_damage_clips->length/sizeof(struct drm_mode_rect) : 0;
}
EXPORT_SYMBOL(drm_plane_get_damage_clips_count);
struct drm_mode_rect *
__drm_plane_get_damage_clips(const struct drm_plane_state *state)
{
return (struct drm_mode_rect *)((state && state->fb_damage_clips) ?
state->fb_damage_clips->data : NULL);
}
/**
* drm_plane_get_damage_clips - Returns damage clips.
* @state: Plane state.
*
* Note that this function returns uapi type &drm_mode_rect. Drivers might want
* to use the helper functions drm_atomic_helper_damage_iter_init() and
* drm_atomic_helper_damage_iter_next() or drm_atomic_helper_damage_merged() if
* the driver can only handle a single damage region at most.
*
* Return: Damage clips in plane fb_damage_clips blob property.
*/
struct drm_mode_rect *
drm_plane_get_damage_clips(const struct drm_plane_state *state)
{
struct drm_device *dev = state->plane->dev;
struct drm_mode_config *config = &dev->mode_config;
/* check that drm_plane_enable_fb_damage_clips() was called */
if (!drm_mode_obj_find_prop_id(&state->plane->base,
config->prop_fb_damage_clips->base.id))
drm_warn_once(dev, "drm_plane_enable_fb_damage_clips() not called\n");
return __drm_plane_get_damage_clips(state);
}
EXPORT_SYMBOL(drm_plane_get_damage_clips);
struct drm_property *
drm_create_scaling_filter_prop(struct drm_device *dev,
unsigned int supported_filters)
{
struct drm_property *prop;
static const struct drm_prop_enum_list props[] = {
{ DRM_SCALING_FILTER_DEFAULT, "Default" },
{ DRM_SCALING_FILTER_NEAREST_NEIGHBOR, "Nearest Neighbor" },
};
unsigned int valid_mode_mask = BIT(DRM_SCALING_FILTER_DEFAULT) |
BIT(DRM_SCALING_FILTER_NEAREST_NEIGHBOR);
int i;
if (WARN_ON((supported_filters & ~valid_mode_mask) ||
((supported_filters & BIT(DRM_SCALING_FILTER_DEFAULT)) == 0)))
return ERR_PTR(-EINVAL);
prop = drm_property_create(dev, DRM_MODE_PROP_ENUM,
"SCALING_FILTER",
hweight32(supported_filters));
if (!prop)
return ERR_PTR(-ENOMEM);
for (i = 0; i < ARRAY_SIZE(props); i++) {
int ret;
if (!(BIT(props[i].type) & supported_filters))
continue;
ret = drm_property_add_enum(prop, props[i].type,
props[i].name);
if (ret) {
drm_property_destroy(dev, prop);
return ERR_PTR(ret);
}
}
return prop;
}
/**
* drm_plane_create_scaling_filter_property - create a new scaling filter
* property
*
* @plane: drm plane
* @supported_filters: bitmask of supported scaling filters, must include
* BIT(DRM_SCALING_FILTER_DEFAULT).
*
* This function lets driver to enable the scaling filter property on a given
* plane.
*
* RETURNS:
* Zero for success or -errno
*/
int drm_plane_create_scaling_filter_property(struct drm_plane *plane,
unsigned int supported_filters)
{
struct drm_property *prop =
drm_create_scaling_filter_prop(plane->dev, supported_filters);
if (IS_ERR(prop))
return PTR_ERR(prop);
drm_object_attach_property(&plane->base, prop,
DRM_SCALING_FILTER_DEFAULT);
plane->scaling_filter_property = prop;
return 0;
}
EXPORT_SYMBOL(drm_plane_create_scaling_filter_property);